Samsung AddWash door fix

Samsung AddWash door dissasembly a seal fix.

[@markwebster9422]

I had exactly the same problem and struggled until I found your video. Fixed in 5 minutes with your help! Thanks so much.

[@Ivan_Shn]

Thank you very much! I solved the problem, as you've shown. God bless you

[@RufusBallaster]

utterly amazingly fantastically brilliant step by step instructions which I followed successfully. You are my hero Delaghor!

[@mrpaulsanderson]

Thank you very much for a brilliant solution to this problem👍🏼

[@davidmorley6562]

Thank you friend. The only video I could find on this seal. Saved me loads. Getting that part in Australia was difficult. Only one supplier online had it that I could find.

[@moniquesolleveld4115]

So increadibly helpful! Thank you for your investigations! I pulled off the seal by mistake and indeed, I could not find any help with Samsung. Regards from a handy lady from Holland 😉

[@Trener125]

Bro, thank you so much! I was already desperate, when found you video. Will not remove that seal again!!!

[@4000fonts]

You have just saved me £175!! Thank you ❤🎉

[@numberoneab1949]

This helped me, thank you very much sir. What a pain in the arse just to clean the ring! I pulled out the ring to clean it and I have to disassemble the entire door to put back the ring. Thanks again, you saved me a headache and possibly a broken door.

[@trbajohostelfleminghostel7228]

You did help me. Thank you so much man!!! God bless you

[@dimitrapapadopoulou2072]

I can‘t thank you enough!!! I was trying to clean it and it just came off! Are they kidding us with those stickers?!?!?! 😂 Thank you, thank you, thank you!

[@diannemarsh8704]

Thanks for the video. Actually I did exactly the same steps you described, removing the 4 screws, but it didn't seem to want to come out very easily. I didn't want to force anything and get into more trouble than I already was. So I chickened out! I was cleaning around that rubber gasket and noticed a load of gunk was making its was under the seal and even caused a crack and some of the plastic to break. Yours looks similar to ours, but we're in the states and even though I believe ours id newer, they are basically the same. Thank you kind sir for the posting. You have saved me a lot of time, because I thought I had to take the whole glass door gasket off to get at the darn thing. From behind it, I could see 2 screws from behind the add door. I will have to order new plastic inner panel that gasket goes around, but if I can do this in the meantime, we can still use it and have clean clothes for the holidays! Kind Regards, Peter

[@GarethEasey]

That was very helpful, thank you for sharing

[@dos9576]

Top Video, thank you very much! ❤

[@ae201726]

Thank you so much!! So helpful!

[@hoflpeter]

Broke all the plastic hooks on the 2 sides when removing the outer part but the 4 screws make sure everything stays in place. You feel no difference and no leaks as that's not where the water is. Great video 👍

[@adiavrahami8744]

Thank you very much dear! You helped me a lot with this detailed guide!

[@KABULuser]

Thanks and love from Afghanistan ❤

[@suhaimijambari]

Thanks bro . I’ve finally found the solution . Able to understand now how to replace or reseal the addwash door seal

[@PtWhiteBelt]

You just saved me having to call Samsung's assistance and potentially being without a washing machine for a while.

[@johnbarns4425]

very very good this is only place i could find this do it yourself ,so i followed your iyou should work for samsungnstuctions and fixed the seal ,as for samsung say no more thxs alot you saved me pounds,

[@elainemathers2248]

Thanks we managed to sort our seal saved us lots 😀

[@lblclinicalpsychologist4642]

Thank you so much for this video

[@slawomirp6160]

Many thanks for help and advice .

[@san3har]

Thank you!! I would one thing, the tabs are easy to break and they are on the sides. I would not use too much force and maybe try some gentle heat to help.

[@elainemathers2248]

Thank you managed to sort machine saved us lots

[@carensmith1484]

Thank you for this video! It is very helpful!

[@40rak_no_to_netocno94]

Спасибо друг)

[@ishitasarkar9635]

How did you get the stickers off? Thanks

[@ericmueller16]

The inner window on my Samsung washer has broken. This is the part you are replacing, but I can't find a part number online. Can you provide that? Thanks.

[@Mikey_uzi]

thanks

[@Birdscotsong]

Thank you for this video! It was the only video I found about addwash rubber problems. My addwash rubber got loose and part of it disintegrated inside the drum. Does anyone know where can I buy the addwash rubber seal so I can replace it myself? Thank you!

[@jerzykrzyzanowski7099]

Where did you buy this part? What is the number of this part?

[@dariolurido]

Thx!!!

[@Rancho92]

very appreciated sir, I have the same problem

[@shedhead00]

Thank you

[@polskipolak32]

On 0:15 - Have you had screws in these holes? I do not have.

[@Delaghor]

Yes i've had.

[@mohammedbelmokhtar6962]

How to remove the 2 stickers ?

[@patriciaarmstrong1084]

How do you take ‘stickers’ off to get to screws

[@stephenguy6606]

Use a sharp knife to prise them off !

[@mkinttrim]

anyone have a fix for the add a wash door that won't lock?

[@jdsfsdfshdgdfhdfsgh]

A little adhesive of some sort should hold the gasket in place??

[@johnbarns4425]

adhesive would not work on seal

[@Delaghor]

If it will happen again I will probably look for some sort of adhesive.

[@MaMa-nm1wi]

Thx