Samsung Galaxy S21 Ultra Whitestone Dome Glass INSTALL & REVIEW

[@Josh_Quinonez]

Whats up everyone! Let me know if this video helped you out. Thanks for watching! Like and Subscribe!👍

[@cliffjg]

Really useful as you make it look so easy. Do you not need to cover the front camera to stop adhesive getting in there? My Phone seems to have a depression around the camera almost as though there is a screen protector on like they did with S10+

[@phillippugh2161]

@@cliffjg there's not a screen protector this time so I just ripped it off . It's just a cover protector for shipping besides it's Invicta glass

[@markwarn4979]

What's that wallet paper?

[@johnkarpontinis1410]

Nice video 👍

[@Josh_Quinonez]

@@johnkarpontinis1410 thank you

[@actie-reactie]

I think that solving the landing problems of the starship is less complicated....

[@Josh_Quinonez]

🤣🤣🤣

[@lizpoison7205]

Depends on the starship tho 🤔

[@Levi_52_336]

@Jonathan Diaz I prefer corners on my phone, which is why I prefer the look of the Notes, but in order to make them comfortable, the edge need to be curved. If a phone isn't going to have corners, I'd the edges should be flat. They could also just make it a perfect rectangle, which would require a case to be comfortable, but most individuals don't like to rock cases for some illogical reason.

[@michaelellis6384]

Its not complicated it's completely cool for working.

[@UnknownUser_0000]

I mean if this is complicated for you I'm not sure how you plan on getting through life..

[@Said-lamrani]

When u finish installation. Samsung : New s22 in market.

[@FRAMEDSKATEKREW69]

You that dude that gets a new phone 10 months into its lifespan

[@twiztedclown]

atleast the hardware usually gets an upgrade not a downgrade like some lemons in the world

[@realMDizzy]

That's some next level screen protector right there!

[@Josh_Quinonez]

Definitely 💪💪

[@bmccarty2012]

It is SUPER IMPORTANT that you do the install on a perfectly level surface! I tried my install on a surface that turned out to be about 1/16th of a bubble off on a torpedo level, and all the adhesive ran off the side of the phone. The instructions say to check the surface with a level, and I highly recommend that you don't skip that step.

[@jjpaq]

If you don't have a level, the S21/+/Ultra have a reasonably accurate one built into the Edge Panel if you enable it.

[@bmccarty2012]

@@jjpaq Good info, thanks!

[@ohseongkwon6019]

I'm always bad at putting screen protectors on, great video!

[@Josh_Quinonez]

Hopefully this helps!👍

[@Motorsports_3]

This one's easy asf bro trust my first one cracked so I litterly put the 2nd one yesterday

[@Sadeshmagic]

Though many people hate the installation, i personally love it!! And to see a more updated version with a good jig and automated process is great. I've been using the Domeglass on my Note 8 for the last 3 years now and its served me really well Thanks for this video. It was quite useful :)

[@Josh_Quinonez]

Glad it was useful to you👍

[@nomad090]

Have you had to replace it in the last 3 years?

[@noodlekins]

I love this screen protector, they have saved my s20 Ultra 4 times! by the second installation I was more confident and now its super easy. it seems pricey but the relief of having the protector shatter and not your screen is priceless!

[@Josh_Quinonez]

It's definitely worth it.

[@pharaohlove1832]

You get to screen protectors though so it's worth it

[@noodlekins]

@@pharaohlove1832 exactly!:)

[@BadWeatherfreak]

It has lifetime warranty

[@thequeeen0072]

This has been the most helpful video for this screen protector! I just installed it on 2 devices and it was so easy thanks to this step by step guide. Thank you so much for making this video!

[@Josh_Quinonez]

Glad I can help! Don't forget to subscribe 👍

[@thequeeen0072]

@@Josh_Quinonez of course! All done! Ty again!

[@JimiKing]

That was a great help. Many thanks. The video on the manufacturers website was no help whatsoever. Without yours I'd never have managed it.

[@Josh_Quinonez]

Glad I could help👍

[@Octorious]

First time, I wrongly assumed which side the peel off on the protector was, and assumed that was the top side (which of course wouldn't make sense if you think about it more, its the underside cos that cant be wiped afterwards. So I ended up with glue everywhere, puddles on my desk, my phone was dripping and I had a dry, but also wet gluey mess to get off my phone. Left it a day, came back to apply the second, got it the right way up and looks good! Its very gluey on the edges etc though still, gonna wait an hour or so to let the rest ooze out if any still is, then I'll take the stickers off and wipe. Thank you for the help :)

[@JdotA.]

Excellent step by step instructions! It looks daunting but it's actually very easy and works great! Just remember to redo your finger prints. Thank you!

[@TechOut]

Ok so I just got one of these and I wanted to leave a lil bit of my opinion here. 1. if your doing this yourself and not listening to someone explain it then it really goes a lot faster and isn't very hard. 2. yes they are $70 and worth every penny. They are very clear and bubble free and don't peel up at the edges like the plastic ones do. Plus you get 2 of them along with the UV light.

[@vaultboy1419]

$70 for a cracked sceeen protector is better than $500 for a cracked screen

[@cwatson42785]

Couple questions...How do you remove it and the adhesive when you need to? Also if the adhesive goes on the sides does it wipe off easily? Thanks!

[@TonTon-ge2wn]

i work at a phone repair store that sells these screen protectors and to remove them, u can just use some isopropyl and maybe get a plastic card (dont use anything metal or u will scratch the screen) and just slowly weaken the adhesive with the isopropyl and itll come off easily. For the adhesive leaking onto the sides, just wipe it off with an alcohol wipe and clean the rest with a micro fibre cloth and ur all good to go.

[@UnluckyGorilla]

Watched along during the install. Came out flawless. THANK YOU!

[@Josh_Quinonez]

👍💪🔥

[@christopherengel1275]

Great video Josh, very instructional. Appreciate the time invested in making this for the rest of us. I would however if you don't mind, like to make one suggestion to your viewers out there. When the application procedure is finished, I would recommend leaving the phone in the unit overnight before popping it out and cleaning it, this giving the adhesive plenty enough time to dry. What happened to me last night Josh, was by the time I finish the application, I followed your instructions and immediately popped the phone out of the case after waiting your suggested two to four minutes, and then proceeded to clean the sides for any remaining adhesive residue with the recommended alcohol pad. What I noticed was, the alcohol ( however subtle) had slightly gotten up underneath around the entire border from cleaning the edges of the phone. This caused the alcohol to slightly dissolve the still freshly applied adhesive causing it to completely ruin the entire application, forcing me to remove, discard, and start again with the second protector provided in the kit! I am happy to say that at the end of the second application, I woke up the following morning, popped it out of the case, and was able to clean with absolutely "NO" issue whatsoever!.............Thanks again Josh!!!!

[@yeeyboi1409]

Thx for the tip will for sure leave overnight to cure just to be on the safe side, glad I got a heads up

[@paigestephens4569]

Very easy to follow!!! The screen protector isn't as advanced once you look at all the parts. My only problem is my surface wasn't fully flat, I guess, and I got two super tiny air bubbles. It is quite visible on white backgrounds. Other than that, amazing video!!! Edit: Super easy to take off and reapply. Got it perfectly the second time. Make sure your surface is flat!! Don't trust a folding table.

[@Spinal2111]

It's unfortunate you can't send the uv light back for some sort of credit. The amount of these they ship out seems like a very unnecessary expense adding to the cost.

[@CPTFiXtion]

You keep it in case you ever have to get another protector, they'll just send the protector and adhesive for less money than the big kit

[@eKcBlaze]

Can confirm this screen protector works just fine with the Supcase UB. I noticed it didn't work without some extra work on your note 20 video.

[@ethnikoexpose]

Thank you so much for this video!!!! A friend of mine suggested this type of screen protection..when the package arrived I was terrified... I never thought that I could handle all this stuff...and then I searched on KZbin and I found your video... JOSH THANK YOU SO SO SO SO SO MUCH! ♥️♥️♥️ I don't feel confident by reading instructions..I prefer video example and you made it so much easier for me.. For anyone that feels that is so complicated... I did it right by using Josh's video, YOU CAN DO IT TOO!!!!

[@TexasEdition]

Nice video. Mine did not come with the backside pads, but nonetheless, can't wait to get this set up.

[@FinkworldTravels]

Excellent step by step instructions, thank you! my fingerprint scanner would not accept my fingerprint after install until I went into settings, removed all fingerprint scans and re-did the scans. Now it works perfectly!

[@theblurmetalhead]

why mine dun work.. sigh

[@sAmiZZle82]

Yeah that's to be expected as long as it works after you rescan them

[@sAmiZZle82]

@@theblurmetalhead did you press your thumb down on the fingerprint sensor area like in this video before the final UV light step to cure the adhesive? It makes the adhesive thinner in that area so it can read your print better. Also turn on your phone's setting for extra touch sensitivity for use with screen protectors

[@theblurmetalhead]

@@sAmiZZle82 i nv.. but ya been living w it for 3 mths now so ya next time when i get a new phone i will not use a third party screen protector anymore.. thanms for. your replu.. Wishing you Happy new year and a better one too staf safe

[@1shagg420]

I've been using Whitestone for a long time, and I love the new motorized top removal! But I do not use that weight anymore, every time I've used it, it pushed a bunch of LOCA glue out the sides leaving me a huge mess to clean up.

[@dvdrwsor]

Sometimes when you don't use the weight, the fingerprint sensor doesn't work too good.

[@JonaHanz-u2hix]

I just successfully installed this glass screen protector on my S21 Ultra following this video. Thanks, Josh.

[@Josh_Quinonez]

Glad it helped!

[@atomicdemise]

All I can say is after following this wonderfully Detailed and professionally narrated how to video is make sure your surface is 100% absolutely level . I did everything perfectly except for not having A 100% level surface and so I ended up with a tiny air bubble at the top . Maybe I will just return to Amazon

[@SeriouslySinigang]

Hi! I love all your videos! Can you do a long-term review of these tempered glass screen protectors?

[@theblackphantom7314]

Thanks so much for this video bro, it's ths reason I purchased White Stone Dome. I followed your directions and my screen protector came out flawless.

[@kmatias333]

thanks for this helped me out. last time i did an install was for my note 9 - i find it really great that they have improved the installation process

[@imran4968]

Yeah, I am never gonna use that back pad as that looks tacky af especially on a $1200 phone.

[@Josh_Quinonez]

Yea me neither Lol

[@DavidRodriguez014697]

Foreal.. If anything, you need to keep a silk cloth in your front shirt pocket to wipe this beauty down.

[@nicholasoliveri6746]

@@DavidRodriguez014697 the little circle pad is great for keeping the screen clean at least

[@jamescooper9883]

Thanks for the guide mate, literally just applied my screen protector after watching a couple times. Couldn't be happier 😁

[@jennifercannadine3442]

Really excellent tutorial - thanks! The instructions made it look very complicated, but you really simplified it down. I managed to do it even with a headache! This has been the easiest screen protector to install. No taking it off 4 times and recentre-ing, and then finding it is still off. No bubbles, no bits at the edges that come off. For anyone struggling, watch the video once through and then play it through again whilst you are applying step by step. Unfortunately I missed the step about pressing on the fingerprint, so my finger sensor doesn't work, but I just use face recognition or pin instead. My last phone's sensor didn't work either, so it's no big deal.

[@SCYTHIANrus23]

Hi! Amazing wallpaper/theme!🤪 pls, tell me, were i can get it? Galaxy themes..? And name of this wallpaper..theme? Thx!

[@brooklynjlo2012]

Hey would be possible if u could recommend a screen protector for the camera portion for the back of the phone to prevent scratches thank you.

[@Josh_Quinonez]

Whitestone dome has a great one and so does caseology 👍

[@evolve2survive324]

@ Josh Quinonez would you advise to invest in the glass rear camera protector from whitedome ? is it really necessary and worth the investment ?

[@Josh_Quinonez]

If you drop your phone a lot yes. If not it's not really a big deal honestly. Especially if you're already using a case

[@Hasankhan-ij4zf]

Does it fit with a mous case?

[@foreverlovestruckweddingsa182]

Great installation video, easy to follow with some great tips - watched it once before installing and then replayed step by step. I had to set my fingerprint again but was still having to press very hard. Adjusted the screen sensitivity in settings and it now works perfectly! Perfect installation- thank you! 🙏

[@Josh_Quinonez]

Glad I could help!👍

[@skosankje]

Question.???? Is there a screen protector that you have too peel off before you add the White doom protector ????

[@Josh_Quinonez]

Not on my device. But I've heard pre-installed screen protectors do come on some devices. So if yours does have one then yes peal it off first before installing this one

[@skosankje]

@@Josh_Quinonez thank you.. I'm getting the s21 ultra soon , I had the note 10 which had a pre installed screen protector that I didn't even know it had .. again thank you

[@abdallahaly7871]

A few weeks ago i've installed the spigen version of the whitestone dome (spigen glas.TR platinum 2.0) for my s21 ultra and it fits really good. Which one is better? Do i have to remove it and install a whitestone dome glass? (I'm asking because they are almost identical)

[@snickspone3265]

When you make that case video, please include the Otter Box Defender Pro series. Getting that case for my phone and I want to see if I can get the screen protector!

[@amieconant4608]

I bought both not knowing that there would be a problem 😕

[@embracedpower389]

@@amieconant4608 was there one?

[@amieconant4608]

@@embracedpower389 yes

[@Ani-rv4mr]

Thank you. Excellent tutorial. Will it be hard to remove and will the adhesive leave any residue or damage the screen in any way?

[@Josh_Quinonez]

Hope this helps👍 kzbin.info/www/bejne/iJWbhWtoqZl2mqs

[@sykoslim8851]

That little foam circle on the back is cut out so you can have those little pop top things that "make it easier to hold your phone" not to wipe of your screen lol...

[@Brian-Vader4633]

Don't see myself sticking that back sticker on my phone...

[@mikerzisu9508]

nope, not when 99.9% of us are using a case.

[@cwatson42785]

@@mikerzisu9508 ikr, imagine not having a case on your phone nowadays

[@mikerzisu9508]

@@cwatson42785 I get it, you want that quality premium feel. But phones are not designed for grip, they are designed to be esthetically pleasing, and are very fragile. A case is a no brainer... they have saved me countless times

[@scottkriegerjr.6205]

What is the point of using the stop watch for timing the UV cure light? One press gives you 15 seconds and shuts off automatically. 2 presses gives you 60 seconds and shuts off automatically. The use of the timer seems redundant.

[@Josh_Quinonez]

To show that I actually let it stay on that long. You won't believe the people I get sometimes saying I skipped steps or didn't cure it long enough just because I don't show the whole curing process on camera. So this time I showed the whole curing process with timer👍

[@WhereTheMindisWithoutFear.]

Where is the link for the beautiful wallpaper

[@Josh_Quinonez]

Got it from an app called Ultrapix👍

[@faithmutti2197]

What are these screen protectors like to remove when you need to replace it after braking? I've never used the uv adhesive before. Does it leave any residue you need to remove before installing another? Is it more difficult to remove off your screen? Any advice would be appreciated :) otherwise, great video!

[@jjpaq]

I just removed the Note 10 version of this when I sold mine, it comes off in pieces because of the glue. Definitely not a single peel and took some prying to get the last few pieces off. I didn't notice any residue though. Overall more annoying than the standard tempered glass protector like the ZAGG ones. Still, I'd rather have one of these on for a year and suffer 10 minutes of inconvenience when it comes off, than use a film protector and have it crack the first time I drop it on a hard surface.

[@faithmutti2197]

This helps a lot, thank you! I've bought a pack and am going to give it a shot. I usually use tempered glass screens that stick on. Though these don't last long at all. My new Samsung galaxy s21 ultra was in my handbag and something hard broke the screen protector. It also shattered after dropping it from no more than 2 ft. I'd rather not take any chances as this is the most expensive phone I've ever owned. I dug deep into research for a good case with not too much bulk and found the uag civilian which I am very happy with. I figured it would be silly to get a good case and not spend the extra money on a decent screen protector.

[@Matty-H]

Hey! Thanks for the great video! Just a little question, should the screen protector slide under the jigs or does it sit just infront of them? Thanks! Just wanna make sure I do it perfectly!

[@ark1065]

08:56 Do Not wipe edges because it removes the sealant and allows air bubbles.

[@MrB0b3r]

When I pry the glass at the corners, it starts to peel off. Do you have that too? I illuminated the adhesive already 3x1min and then the same. I did not have this problem with the t-max glass in the samsung s8.

[@keithtae]

How is your dome glass holding up? I realised dome glass is way too fragile compared to tempered glass. Got a few cracks already from two 1 foot drops (bed to carpet! Not even on a hard surface) probably gonna switch back to neo flex.

[@Josh_Quinonez]

I'm still on this first glass I installed. Even after all of the case drop tests on the channel and drops after. It's held up well👍

[@nafeesiqbal1538]

Excellent job. Will order one soon. It looks very difficult but obviously you are used to it however will be my first time as I am upgrading from my current S7 phone to S21 Ultra. Peace.

[@Josh_Quinonez]

Awesome! You are going to love the S21 Ultra👍

Maaan the S21 Ultra is huge! I just got S21U today and before that I had S8.

[@StevieSparkZ]

Hi Nafees, I just got my Samsung S21 Ultra 5G and I just upgraded from a Galaxy S7 as well, lovin it! Hope you are/or will too! (Been around 5-6 years, got the S7 back during a Black Friday deal)

[@FrankieG713]

Does the ultra have 2 screen protectors out of the box that you have to peel off before you install the glass one?

[@Josh_Quinonez]

Mine didn't come with a screen protector. Just the plastic film that you peel off. But you'll want to make sure your phone is free of any screen protector before applying the Whitestone dome.

[@alexabacanu389]

Mine looks like it has 2 as well, the film that you peel off and a protector underneath. I actually came to find a video that says if this is actually what it has or if I'm going crazy seeing double😅

[@cliffjg]

Mine came with a thin film with a tab at the top right corner. Underneath this is a better fitting protector. You would need to remove this to fit another protector. It is very clear and works with fingerprint scanner. It does not covers side edges of screen too well and the gap can interfer with swiping. Have not seen any review mentioning this or peeling off.

[@Josh_Quinonez]

@@cliffjg The US models which is what I have does not come with a screen protector. If it did I would have mentioned it.

[@FrankieG713]

@@Josh_Quinonez thanks for clarifying that

[@sAmiZZle82]

It's a shame they don't include a metal weight to place on the fingerprint sensor or a symbol to aid with locating the sensor for where to apply the weight during the installation. I see Mowei and amFilm do provide these, but not sure about quality of their glass compared to this 🤔

[@Alpha4Sierra]

What happens if you need to remove the glue later down the line? Do you need a heat gun to remove it? Also, if you screw it up, how do you correct it?

[@Josh_Quinonez]

Here is my removal video. kzbin.info/www/bejne/iJWbhWtoqZl2mqs Also, if you do happen to mess up somehow, you can always start the process over again before curing the adhesive. But if you follow my directions exactly you'll be ok 👍

[@planedudea380]

Thank you! While nerve-wracking, I followed this step by step and it came out great!

[@Josh_Quinonez]

That's awesome to hear! Glad it helped👍

[@GutenLieben]

So does the glue go over the front selfie camera? Or did that plastic strip on the tray cover it....

[@Josh_Quinonez]

Glue does not cover the camera👍

[@GutenLieben]

@@Josh_Quinonez Thanks! Appreciate you taking the time to make this video cause i wouldn't have had a clue.

[@Josh_Quinonez]

@@GutenLieben you got it👍

[@JohnCGUNSNFREEDOM]

So will this work with the otterbox defender case for the S21Ultra??

[@Josh_Quinonez]

Probably not to be honest. It might fit with it, but once you drop it the pressure from the tight fitting bulky case might start to push it up.

[@loshakopija]

Can we use other screen protectors or just the one from whitestone? Do they sell them separately as well cause I couldn't find them.

[@kbcs95]

Thanks for the tutorial!! I was able to put the glass without problems

[@Josh_Quinonez]

Awesome! Glad I could help!

[@73YOSH73]

Hi.Thanks for this effective video. Where can buy this installation apparatus?

[@Josh_Quinonez]

You got it👍 Link is in the description

[@benbraaf8109]

I'm gonna replace mine in a bit. I missed the step when you put pressure on the reader but it still worked. Now it's the second time and I'm back here😆😆 Only the removal of the old one scares me a bit though

[@tomaszsolidny5956]

Hello. Do you also see shadows under the glass on your phone? I mounted them just like you. You can also see them in the video. Is it supposed to be like that?

[@loghome7061]

Did I just see you in a Verizon commercial? Moving up big time !

[@Josh_Quinonez]

Haha yup!

[@aqibjaved5203]

Perfectly installed just now. Thanks Man for your video ❤

[@Josh_Quinonez]

Glad it helped!👍

[@marcosmos7478]

what's it suppose to cover on the left side with the black stick? is it just ramdom?

[@Josh_Quinonez]

Just to keep the adhesive from going over because the white padding on the side only goes so far

[@moosc]

What makes whitestone so special or different then other glass screen protectors?

[@Josh_Quinonez]

It works with the indisplay fingerprint sensor properly and installs it on accurate 👍

[@andreykuznetsov5280]

Does it fits with original covers? Especially leather ones

[@antonioenrico]

CAn you feel the edge of the screen protector when you swipe from the edges to do swipe gestures?

[@Josh_Quinonez]

Very little. If you have a case on you don't feel it at all

[@antonioenrico]

@@Josh_Quinonez cool thanks for the reply. kind of makes me want one now, it looks like theres no screen protector at all. And i like ones that feel like bare screen.

[@Josh_Quinonez]

Yea, honestly, at least for me, it doesn't even feel like I'm using a screen protector.

[@TheSingingCelebrant]

thank you for making this as the video link on the Tauri Packaging does not work

[@jat-justamaturetech-philpj8285]

LOL. JUST SAW YOUR VERIZON COMMERCIAL JOSH! ON FXX 9:14AM. GREAT JOB, LUCKY DOG!🤑

[@kewlnes987]

Oh shit just looked at his pfp, I recognize him from the commercial lol. When I saw the ad I thought it was just an actor but it's cool to see they got a KZbinr on the commercial

[@313collector]

Hey Broham Does the UAG Case Work with the Whitestone Screen Protector???

[@Josh_Quinonez]

Honestly I'm not sure. I've never used a UAG Case before. I'll have to check them out👍

[@313collector]

@@Josh_Quinonez OK Thanks man I would really appreciate it

[@ehabsh4933]

hey man, thanks for the video, i didnt understand if they provide two screen protectors but not 2 of every thing else (especially the glue), then how am I supposed to apply the second screen protector next time? thanks!

[@Josh_Quinonez]

They provide two of everything. But I only showed what was needed for the installation 👍

[@laurieevans87]

Awesome video. Easy to follow and my installation went perfectly because of this video! Thank you :)

[@Josh_Quinonez]

Awesome!!

[@SkilledCoconut]

Save the money and get amFilm. That's what I've been using and their kit works perfectly at almost half the price. Sometimes they have sales bring the kit down to $20. My amFlim screen protector installed flawlessly with the fingerprint scanner still working. Only thing I can say is to watch the video and follow it exactly. You won't have any problems.

[@Gunny_101st]

Josh this video was amazing!!! Made it so much easier to install. Only had the protector on for about 20 min but seems high quality and feels great. Hope it lasts and doesn't negatively affect the fp sensor or s pen functionality.

[@Josh_Quinonez]

I'm glad my video was able to help you out 👍

[@maxmarcus6074]

Once dried, say you want to remove the screen protector. Wouldn't it be a hassle getting that dried glue off?

[@robertrose3068]

They've updated it since I used it last. It used to have arrows on each side to tell when to stop pushing down on the bottom, now I see a plastic piece that adds some weight to help it spread instead of the weight of the screen protector. I've used these for years and never had issues.

[@LonestarROB]

Did you remove the 2 preinstalled screen protectors that are on the S21 Ultra first?

[@Josh_Quinonez]

There was no pre installed screen protector on my device. But yes if your device comes with a pre-installed screen protector, then make sure to remove it.

[@haroo86]

Nicely done. Perfect timing, just bought myself one. Let's see how I go😅

[@Josh_Quinonez]

Awesome!!

[@haroo86]

@@Josh_Quinonez Worked out well! 👍.Thanks for the tutorial.

[@Safa-jt2oo]

Thank you so much I purchased it and done it as you demonstrated its perfect 👌

[@Josh_Quinonez]

Awesome!

[@Mitokafander]

Could you also show us how to replace the screen protector let's say in about a month? I've seen videos where replacing this is quite a painful experience.

[@jameshepburn81]

Thanks for the great video and instructions got this coming tomorrow for my ultra and the bit for the camera module👍

[@Josh_Quinonez]

Nice! Hope the installation process goes smooth for you!

[@MrXoxo2]

does installing screen protector on phone reduce the viewing display quality (less vibrant, less saturated, etc.) of the device ?

[@ebenezernithin]

Thanks a lot buddy for this awesome video..one thing i wanna ask..is this glass case compatible? can i use spigen case on it if i put this glass? Much appreciate your reply for this one...

[@Josh_Quinonez]

Yes this protector works great with spigen cases from my experience 👍

[@ebenezernithin]

@@Josh_Quinonez Thanks mate..

[@lildcd00]

Is that the stock wallpaper? 😍

[@wybornit]

What about a second glue tube when I would like to install a new glass?

[@Josh_Quinonez]

It comes with extra👍

[@wybornit]

@@Josh_Quinonez Nice, thanks!

[@BadWeatherfreak]

Will all that glue come off if you have to remove the screen protector?

[@Ghost88o9]

im impressed.. i had my doubts the fingerprint wouldnt work but you gave me hope :)

[@iNSOMNISTREAM]

I see many people complaining about it being to complicated, has it really gotten that bad that we lost our ability or drive to problem solve or attempt to try things that we havnt before? Especially in america its a sad thing to see being how capable we were and productive just a generation or two ago. Now we expect perfection from everything and still demand that it be easy. Rarely will those two be together, if you have one, usually you are sacrificing some of the other which makes sense being the complicated amount of things happening within whatever device. If you want durable yet ergonomic, then itll cost a little laziness for effort. If you dont care for durability and dont mind scratches or replacing then go cheap or none and just use the device. The expectations and zero tolerance towards having to do something for yourself for a result you want is getting far to regular especially in such an imperfect world. Just enjoy whats available, if you dont like it, noones forcing you to buy it, so no reason to complain about something you wont take the time to experience for what it is and making it look negatively just out of, well, laziness or unwillingness to put forward the effort to get it done. It being complicated doesnt make it lesser quality or unable to do what its made for, usually its more complicated to do what its made for and have a higher quality overall. Those who do use it, hopefully get to enjoy it with a higher confidence knowing the quality is higher and method used to install is more reliable and have a better bond with the device. Idk how many protectors ive tried that fall of far to soon. Id rather it stay on with a little effort put in

[@charlinelebourg4270]

Hello The s21 Ultra have a Factory Installed Screen Protector, do you remove it to put the Dome Glass, nobody speak about it.

[@Josh_Quinonez]

My device didn't come with a pre-installed screen protector which is why it wasn't mentioned. But yes, if you have one, remove it first👍

[@johnkarpontinis1410]

Hey what if you want to remove the protector? I looks a bit perment with the adhisive

[@Josh_Quinonez]

This will help you out👍 kzbin.info/www/bejne/iJWbhWtoqZl2mqs

[@veronicaturner5050]

Do you know if this will work with otterbox defender?

[@hatredrules8049]

Can this screen protector work with the zizo bolt series for the s21 ultra?

[@Leonardhsu]

Super helpful! Thanks Josh!

[@Josh_Quinonez]

You got it👍

[@paulsheriff]

Good easy video love dome glass so easy to install when you get the hand of it ..wish I new how crap the screen cover was from Samsung the pre installed one ..as just left it on ..1 year later even with tuff case cracked the screen 300 pounds fix..but dome glass saved the day ..since it was hair line cracks and 1 at the edge it's almost impossible to see ..unless you really look ..should have put this on from the start that I have previously done with all phoned

[@EgwPaliegw]

Does this work OK with Spigen cases ?

[@Josh_Quinonez]

Yes👍

[@stricky345]

That click doesn't sound good are you sure the phone doesn't get scratched? And what about the blue light filter, does it tamper colors?

[@imran4968]

It is just me or does the whitestone dome screen protector seem pretty fragile for the price as I have bought it for my past 4 gen of samsung phones and right now on my Note 20 Ultra it's already has some cracks on the edges and the top after some light drops even thought I have an otterbox commuter which should absorb most of the impact. And this has happened to me on all of my phone with a whitestone dome screen protector.

[@Josh_Quinonez]

They don't work well with otterbox cases. For me these screen protectors always hold up well👍

[@W1ldK1ttyK4t]

Well that bites. I was looking at the screen protector. Any recommendations as to what cases work well with them if otterbox doesn't? Will lifeproof? Keep in mind I have 3 boys lol. I need strong.

[@willsrestorations]

My question is an important one, how is it taking off the screen protectors or should I say removing them to replace them, will it damage your glass your gorilla Glass and what's the easiest way to remove them

[@jamalking307]

Does the adhesive affect the front camera

[@valin0r]

Thanks for this video!! Done it perfectly on my s21 ultra.

[@Josh_Quinonez]

You got it👍

[@valin0r]

@@Josh_Quinonez the protection glass is totally worth the money😄