Samsung Galaxy Tab A | screen detached by itself | how to fix it yourself easily.

A friend of mine brought a Samsung galaxy tab A, he said that all Samsung tabs (Tab S5e, Tab A). he has, are getting screen de-glued and that too after warranty, i had already fixed one of his Samsung tab S5e and this is the second one he brought for reparation.
Please note that, after applying glue and switching on the tab if the tab powers On without displaying any image then disassemble the tab, disconnect and reconnect the battery , connect the screen and then switch on the tablet PC.
Note: If the tablet does not show image on screen or no display then click the link below to solve: • SAMSUNG Galaxy Tab A n...
Link for buying the screen: amzn.to/3L6efAt
You can buy the glue by clicking below link: amzn.to/48nuJxx
If you wish to support my channel, you can buy me a coffee, a cup or two by clicking on link below. Thank you for your support, have a GOODTIME...
www.buymeacoff...
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn a bit by linking to amazon.com and related sites/apps
Take care and do the reparation on your own risk.
Thank you for watching, have a GOODTIME.

[@GOODTIMEStech]

If your Tab does not switch/power ON after connecting the cable, please check the video link given below: kzbin.info/www/bejne/bJnQoWBqnLKFbas

[@ruthseballos5679]

I put the ribbon back and my tablet wont turn on can you help

[@keerthanYT-j6i]

Same with me bruhh

[@ShanawarMalik-dn2gb]

I have same problem

[@BhagyasriUddandam]

Yes for me too

[@liagamer4265]

Thank you so very much truly you helped me ALOT I wish you great luck and fortune omg thank you I was so scared ❤

[@hemantpatel5676]

Sir suddenly my screen popped out but all the things are working so i just have to glue the screen na no other isuue is their plz confirm fast sir please

[@GOODTIMEStech]

Yes Sir, you need to glue it but please remove / clean the old sticky glue before applying new glue or adhesive, if old glue is not cleaned the screen will detach again in few days and also do not use any super glue/ epoxy or glue that hardens, try rubber based glue or the one shown in the video but cleaning old glue is important. hope this would be helpful. Thank you, have a GOODTIME....

[@pokeempire2164]

Thanks ​@@GOODTIMEStech

[@yatikaYatee-my8xr]

Sir please help me my tab screencame off i put the the things as you said but its not working its not showing the display not even turning on please request help me

[@GOODTIMEStech]

@@yatikaYatee-my8xr Hi, disconnect the screen, keep it aside, Remove all the screws on the other part of the tab, Disconnect the battery , Wait for a minute or two, Reconnect the battery, Fix all the screws (please do not power on the device, see that you will not even press the power key by mistake), Connect the screen flat cable, Switch ON and check if everything ok. If the device switches ON then, Switch OFF the device, Glue the screen and fix it. Hope this would be helpful. If you find it difficult to follow, please give me few days and i will try to make a video on this. Thank you, have a GOODTIME....

[@NivedithaD1729]

Sir, I have the same tab... And the screen is falling out for more than 3 years but i didn't care much about it... But today it came out completely and i somehow pressed it back.... Now the screen is not working but i can hear sounds..... Is it better to take it to a repair shop now?

[@GOODTIMEStech]

Hello sir, if the screen was working well before you pressed it then better to take it to Samsung ASC. Thank you, have a GOODTIME....

[@AliMohamed-xb2ef]

once the ribbon is pull 90% tablet at risk and stop working completely because the copper pad wire is damaged .

[@oliviaelaco4902]

The orange strip on the screen side fell how do i fix it my tablet wont turn on and charge?

[@alexandrakouamo8301]

Where the power key located

[@GamerBoy9930]

Hi I have a problem basically the screws under my optical drive slot are too tight to remove which makes it difficult to replace my hard disk any idea on how I can untighten them?

[@GOODTIMEStech]

Hi, sorry for late reply, What is the model of your laptop ? For unscrewing see that the screw head is not damaged and the screw driver tip has not worn out, insert the screw driver firmly and give a sudden turn (like a punch) anti clock wise, if this doesn't work then try to heat the screw with pointed soldering iron/gun and try unscrewing with screw driver..... hope this will work... Thank you, have a GOODTIME...

[@slasher6543]

I have the same problem on my Galaxy Tab A 2016, (A6) but i dont wanna take it out but i also have the urge to take it out

[@BhagyasriUddandam]

How much does they take for doing in a shop?

[@GOODTIMEStech]

If they are not replacing any parts, they should take only service(labor) charges and it differs from place to place.... Thank you, have a GOODTIME....

[@Factoidfirework]

Hello sir mere pass Samsung Tab A hai uska screen automatically detach ho gaya but my screen is allright nothing is broken sir I want to know if I go to samsung service center to glue it how much it will cost.....can you please reply quickly sir it will be very helpful I have tried to search but nothing came up only for broken screen

[@GOODTIMEStech]

Hi , sorry for late reply, If you take it to samsung service center, and if everything is working fine only the screen has detached then they should charge you for adhesive tape and labor charges. I could fix it but my present location is Hubli, Karnataka. Thank you, have a GOODTIME...

[@Factoidfirework]

@@GOODTIMEStech thankyou, 😊😊😂

[@kritiarora1918]

@@GOODTIMEStech hi I faced the same problem but my screen is not turning on what should I do ?

[@GOODTIMEStech]

Hi,@@kritiarora1918 , you need to disassemble (remove the bracket above the battery that covers even mainboard) by removing all the screws, disconnect the battery, wait for a minute and then reconnect the battery and reassemble, now the device should work fine. if the screen doesn't turn ON after this then need to check the FPC and or screen. hope this would be helpful, Thank you, have a GOODTIME....

[@adilbinmohammed7789]

My tab yellow strip has be removed and bend so what should l do pl

[@GOODTIMEStech]

If you fix it back it should work.

[@test-q9f3j]

​@GOODTIMEStech when I tried to put it back it started becoming really hot

[@josepharts7457]

Hello my tab screen came out and i can't on the tab but messages are coming and sound is coming what should i do?

[@GOODTIMEStech]

Hi, may be the flat cable is disconnected or damaged, if it is disconnected you can try fixing it by disconnecting the battery, reconnect the display cable and then connect the battery, switch on the tab and it should work fine. If the flat display cable is damaged then there are very less chances to fix the cable, in this case you will need to replace the screen. Thank you, have a GOODTIME...

[@josepharts7457]

Thank you i will try if it works

[@josepharts7457]

Flat display cable is not damaged

[@adityaharidas6407]

​@@GOODTIMEStecheven I have the same problem. How much will changing the screen or repairing the cable cost in a service center?

[@Nareshashley]

I put the ribbon back but the touch screen is not working

[@akshaykushwaha9319]

I have the same model but dont have tools to open

[@miramarmar]

My tablat screen is coming off and the screen is really glitchy i need help

[@aaronlake1223]

What is the name of the glue you used?

[@GOODTIMEStech]

The glue used is CP-0002 Black colour. amzn.to/48nuJxx Thank you, have a GOODTIME...

[@AmitKumar-sy1sp]

Sir, my tab the screen has come off and the screen to the cable connection is off. I tried following your steps and connect the cable but the screen is not working. Whay could be wrong?

[@GOODTIMEStech]

Hello sir, may be the tab was ON when you connected the cable, disconnect the screen, disassemble the tab and reconnect the battery terminal(disconnect and reconnect the battery terminal), reassemble the tab, connect the display cable and then switch On the tab, if all works well, fix the screen. Hope this would be helpful. Thank you, have a GOODTIME....

[@yeetgod8104]

​@@GOODTIMEStechsir can you please instruct how to reconnect the battery terminal or make a video about it, it'll be very helpful thanks 🙏

[@quamarahmed7793]

My samsung tablet screen came out, i pressed and fixed. But only half screen is appearing. Please help

[@slasher6543]

Use a program called vysor if you can enable usb debbuging

[@F3nd3r28]

Thanks you so much !

[@GOODTIMEStech]

You are most welcome, Thank you for watching the video, have a GOODTIME....

[@yatikaYatee-my8xr]

​@@GOODTIMEStech please sir help

[@AibelBinoy]

My tab's screen hasn't completely fallen off but the top right corner is starting to come off . So what should I do ? , is there a need to completely remove the screen ?

[@GOODTIMEStech]

It is better to remove the screen and apply glue/adhesive completely or else later it will detach again. Thank you, have a GOODTIME...

[@Kanpuriyalalitavlogs]

Screen lagate time aapne kya dabaya to tablet on ho gya ye nhi dikhaya

[@GOODTIMEStech]

kshma kare bhai, aglibaar dhyan rakunga. Thank you, have a GOODTIME.....

[@ArthurFowler-l1o]

FYI. You forgot to put the tape back on the connector

[@GOODTIMEStech]

Thank you for your observation, later I remembered and fixed it back. Thank you, have a GOODTIME....

[@cedarsspirit]

Thank you very much. I put the screen back and it worked!

[@ruthseballos5679]

I put the ribbon back and my tablet wont turn on can you help

[@ruthseballos5679]

I put the ribbon back and my tablet wont turn on can you help

[@GOODTIMEStech]

Hi, If the ribbon is fixed properly then may be the tab was ON while fixing the ribbon, not to worry, now disconnect the ribbon, keep the display aside safely, remove all the screws that you see, take out the cover, disconnect the battery terminal from mainboard, wait for a minute, reconnect the battery terminal to mainboard, fix back the cover and fasten the screws, See that you DO WILL TURN ON THE DEVICE BY ACCEDENTLY PRESSING THE POWER KEY. or purposely. Now connect the ribbon, Power ON and check, it should work. if all is OK then fix the screen. Thank you, have a GOODTIME....

[@ruthseballos5679]

I put the ribbon back and my tablet wont turn on can you help

[@GOODTIMEStech]

Hi, If the ribbon is fixed properly then may be the tab was ON while fixing the ribbon, not to worry, now disconnect the ribbon, keep the display aside safely, remove all the screws that you see, take out the cover, disconnect the battery terminal from mainboard, wait for a minute, reconnect the battery terminal to mainboard, fix back the cover and fasten the screws, See that you DO WILL TURN ON THE DEVICE BY ACCEDENTLY PRESSING THE POWER KEY. or purposely. Now connect the ribbon, Power ON and check, it should work. if all is OK then fix the screen. Thank you, have a GOODTIME....