Samsung Gear S3 Frontier SM-R760 🔋Battery 1350 mAh replacement

Instructions with a detailed description and additional materials on our website, follow the link. vrm24.com/instructions/how-to...
Reviews with specifications, photos of printed circuit boards and parts. vrm24.com/reviews/tech-review...
If you have additional questions, you can ask our specialists, who will try to answer them in as much detail as possible. vrm24.com/questions-and-answe...
Our manual is suitable for all Samsung Gear S3 models - released for the markets of different countries.
The VRM24.COM channel is dedicated to disassembling and repairing phones, tablets, smartwatches, and other mobile devices.
We provide an opinion on this channel, look inside the top brand devices, and reply to frequently asked questions. So, start in now - watch this video and ask a question. You are welcome here!
Also, check the VRM24.COM website, where you will find repair instructions, pictures of motherboards, sub-boards, and electronic components - vrm24.com/.
Facebook: / vrm24com
Instagram: / vrm24com_official
This channel: / @vrm24com
Наш на RUSском канал: / @vrm24ru
Support Us: / vrm24com
Warning
This content is intended to be used for informational and entertainment purposes only.
We do not encourage you to use this video or this content as a direction! Your actions are your responsibility! Be careful!
Following these directions in this video will void your warranty. You are performing this repair at your own risk.
#vrm24com #SamsungGearS3Frontier #SamsungGear
Chapters:
0:00 Introduction
0:22 ! Video is not an advertisement
0:39 Order of the work
1:04 Unpacking the parcel with the battery
1:26 Packed tools
1:36 Hsabat 1350mAh battery
1:54 Adhesive tape kit
2:05 Disassembly
2:22 Features this work
2:43 Detach the strap
2:50 Screwdriver Y00 (Tri-wing) unscrew 4 screws
3:08 Detach the back cover
3:24 Disconnect connectors BUT not battery!!
3:31 Screwdriver (Phillips #000) unscrew 2 screws
3:39 Detach the Bracket
3:56 Screwdriver (Phillips #000) unscrew 1 screw
4:07 Disconnect the battery contact pad
4:37 Disconnect the circuit board
4:40 On the motherboard, the Bracket and in the front case
5:18 Battery replacement
5:21 Remove the battery
5:48 Check the new battery
6:11 Clean the circuit board surface
6:26 Adhesive tape 3M
6:36 Insert the battery into the Bracket
6:42 Attaching the circuit board
6:49 Screwdriver (Phillips #000) screw in 2 screws
7:08 Screwdriver (Phillips #000) screw in 1 screw
7:13 Inserting the Assembly into the Case
7:22 Connecting connectors
7:27 Clean the cover from the old adhesive
7:30 Assembly check!
7:50 Charging check!
7:59 Applying T7000 sealant
8:08 Attach the back cover
8:14 Screwdriver Y00 (Tri-wing) screw in 4 screws
8:23 Clean the surface
8:32 Attaching the strap
8:39 Thanks for watching!
8:50 Don't forget to subscribe!

[@alfmelmak2701]

Wenn der Akku der Uhr nicht mehr lange durchhält sollte man, bevor man die Uhr aufmacht, zunächst eine andere Prozedur durchführen. Durch eine jahrelange Benutzung und somit das Laden und Entladen, stimmen irgendwann die Kalibrierungsdaten des Akkus in der Uhr nicht mehr. Es gibt keinen Menüpunkt mit dem man die Uhr dazu veranlassen könnte eine neue Kalibrierung zu starten. Es sei man bringt die Uhr dazu die Hardware neu zu starten. Mit dem einachen Ausschalten geht das nicht! Um die Kalibrierung zu starten muss man die "Aus/Ein-Taste" (rechter unterer Drücker) für mindestens 10 Sekunden gedrückt halten, bis auf dem Bildschirm das Wort "Rebooting..." auftaucht. Damit startet die Hardware und Software der Uhr neu. Es wird nichts gelöscht! Aber die Uhr beginnt jetzt mit einem erneuten Kalibrieren. Der Kalibrierungsvorgang beginnt, wenn man die Uhr auf unter (!) 10% entlädt und danach vollständig (!!!) auflädt. Die Uhr ist erst vollständig aufgeladen, wenn in der Ladestation die grüne Lampe aufleuchtet, nicht wenn vorher schon 100% angezeigt werden. Damit ist der Kalibrierungsschritt vollzogen. Man kann diesen Schritt noch ein zweites Mal wiederholen (Entladen unter 10% und danach vollständiges Aufladen). Danach sollte der Akku wieder lange durchhalten. Ist das nicht der Fall, dann würde ich erst den Akku ausbauen und durch neuen ersetzen!

[@teh1955]

Very helpful, I didn't think I could do it, but I did with your help!! Thanks!!

[@lucian9582]

Great video - perfect instructions. Job done in 1 hour 👍

[@ObtuseAcute1]

Finally a good qualtiy guide

[@victorlibanio]

very good. tks from Brazil

[@Vrm24com]

nós amamos o Brasil!

[@error-rq1gx]

Alright, few things. One: yes, we all know its not possible for this battery to be 1,350mah at all when the original is 380mah. That would make the battery you're using a little more than three and a half times larger than the stock one. Anyone who watched the video can tell that is compelte bull. Two: at around 4:35 you start to take off the power and back button ribbon cable from the side of the watch. Everyone, BE EXTREMELY CAREFUL. If not, you can end up ripping the ribbon from the top off of the motherboard. If this happens, you will need to solder it back onto the motherboard. If you have no such knowledge, youre SOL. Three: while the capacity of the replacement battery is a compelte lie, the tutorial on how to replace it is still pretty informative. Just follow along and be extremely cautious of that power and back button cable. You can end up doing exactly what I did and rip it from the motherboard, thus making it so you still can not turn on the watch even after replacing the battery.

[@Vrm24com]

Hi! Thanks for your comment! I see your point. So we were not only replacing the battery we tested it in a few simple tests at the beginning and after 7 months. We didn't have the tools to test capacity but anyway all our tests were legit. And yes, the repair is always about being extremely carefull no doubt. In this case it was so difficult to attach the battery and buttons cables because the tip-holes were too small.

[@ILwega]

Great work

[@Vrm24com]

Thank you so much 😀

[@Dede60968]

finally someone tries that battery

[@Oystein87]

It's obviosly a scam that it is 1300mAh...

[@lucian9582]

It’s a joke

[@chavijr9020]

😂😂😂🤥🤥🤥🤥

[@dzyndas]

Hello, thank you for this video, any reviews about this battery?

[@Oystein87]

If you have basic knowlage about batteries ypu know the 1300mAh is fake. Physicly can't have 1300mAh lithium battery in the same size as a 380mAh one.. Just get the original battery if your old one is getting bad

[@playboy6622]

I own a watch4 44 mm. Can we have similar artery replacement for that as well ??

[@Vrm24com]

Hi, I don't think so, it is better to find a video about watch4 44 mm

[@BogdanMesaros93]

the reviews on the website are not very good. people say that it doesn't have 1350mah and that it lasts more than a day charged... can you do a measurement or something? to know if I buy the normal one or this model

[@The.Governor]

I call BS on this batteries capacity. Label is def false advertising. Everyone should stick with the 430 mah battery on Amazon for around $12-$14 cyber deals as low as $10 with prime membership right now. 430 mah is a good upgrade then the stock battery which is 380 mah. There is a reason you can't find this battery sold on Amazon because it's a scam.

[@tyggerdev]

@@The.Governor Also, if the 1350 mAh battery actually was that big, it would be physically larger than the watch itself. It would be great though it you were able to get it in there, this watch would last for a whole week before needing to be recharged. Sadly, our battery technology has not advanced that far yet.

[@user-bs6pt1fz8z]

هل هي متوفرة في موقع علي اكسبراس

[@andreiantohe7442]

I have an gear s3 frontier and is not starting anymore. Do you have any ideas what are the reasons? Thanks!

[@AnkurVermachords]

same here, it use to show some starting problems, then I found a trick, that you place the watch on charging and then once it shows, percentage, press the power button, keeping the watch on dock, it use to get started, but now even that is not working ;( :(

My personal experience, your mileage may vary. I had a similar issue but I 'think' Samsung pushed an update that reconfigured the power-on function. I have to depress both buttons to power the watch on and it's been working fine for me since. The 'power button' alone will still bring up the menu to power off the device though. This is why I think there's an update that snuck past me (my watch auto updates in the background).

[@Oystein87]

​@Haha!😂 No, dude.. Samsung did NOT release such update... Mine powers on just like it has since day one with using only the power button

@@Oystein87 then mine may be in the beginning stages of a ribbon failure but it's been this way for just over a year now.

[@Oystein87]

@ That is more likely.. The last update the watch got was a small security and stability update in August 2022. And that update did nothing for the functions etc.

[@yudami0705]

When charging after replacing the battery, the remaining amount of the charging display and the display while charging appear, but if you try to turn it off again and turn on the power, the power does not turn on... If you put it in the charging dock, it floats while charging and the battery % floats well, but it doesn't turn on when you try to turn on the power. Is there a separate button to key? I can't turn it on even if I press the home key.

[@Vrm24com]

Hi, this malfunction may be related to the new battery.

[@Davesz1994]

Yes , and please compare runtime!

[@Vrm24com]

Hello, we will, we need some more tests to compare.

[@Oystein87]

A new original 380mAh vs a new FAKE 1300mAh probably ends up having about the same battery life. It's not physicly possible for that battery to be 1300mAh when the stock one is 380mAh in the same size.. It's just common logic if you know the basics behind batteries

[@ILwega]

hi! I have a problem with my gear! I replaced the battery because it no longer charged and the red led flashed! after a day i have the same problem again! is the mainboard damaged?

[@Vrm24com]

Hi, who knows, the new battery has malfunctioned or the charging station. If something consumes the charge, it should be disassembled and tested.

[@Oystein87]

Get a proffesional opinion instead. I would not trust someone who installs a battary clone with FAKE 1300mAh

@@Oystein87 So there's a real 1300mah battery that's not a clone? 🤔

[@Oystein87]

@ Nope🤣 Not physicly possible for that size

@@Oystein87 Just going off your wording, which insinuated that there was such a battery.

[@TigerP1]

4:33 you show the removal of the button contacts, but you do not show how to refix them after. Does it need gluing?

[@error-rq1gx]

You can literally just push them back into place. However, be extremely careful not to do what I ended up doing. The top of that ribbon is soldered onto the motherboard. If you end up ripping it off, it will need to be resoldered back onto the board. If you have no soldering skill, the power and/or back button will not work.

[@lucian9582]

No need regluing. Even battery don’t need regluing!

[@alfmelmak2701]

Drefache Kapazität bei gleicher Akku Größe , wie soll das gehen ? Seriös kann das nicht sein!

[@tyggerdev]

They're serious, which makes them delusional. Physics won't allow it.

[@137akash]

WARNING: DONT REMOVE THE COMPARTMENT ABOVE THE DISPLAY, it unnecessary for just the battery replacement purpose!! Display module is very sensitive and it will damage display!!!

[@kamilbendykowski6753]

Ile wytzymuje zegarek na baterii 1350?

[@Vrm24com]

Witam, mamy krótki filmik z testami. kzbin.info/www/bejne/m6HainiGnpKtgJI

[@tyggerdev]

@@Vrm24com There's no way this battery can actually be 1350 mAh. For a battery that is 3.5 times the capacity of the stock battery, you gain 1 day of extra usage. Does not make sense. The larger battery should be lasting for about a week before needing recharge.

[@jkjblogs5319]

I need this battery.. How can i get it?

[@Vrm24com]

Hi, depends, this one we've bought on the Chinese website Aliexpress. You can check eBay or Amazon too.

[@Oystein87]

Oh, trust me you do not🤣 The 1300mAh are obviosly fake... Get an original one and don't be stupid. Basic knowlage about batteries says it can NOT be 1300mAh at this size

[@stevensudnick2948]

how much does the 1050 mAh cost on AliExpress

[@Vrm24com]

Hi, it depends on country/currency etc

[@PatrickJ12334]

Carstream

[@patrickesau2560]

Please note: I have just been informed that they are no parts available for this watch

[@Oystein87]

BS.. Parts are still avaliable. Just got a brand new original battery.

[@error-rq1gx]

BS. It's about half a year after you posted this and I just bought a battery yesterday. So, unless you meant Samsung isn't making anymore parts for it and its third party only, or whatever Samsung had 6 months ago is all they have that's official, no truth to your statement.

[@madpancake9891]

This battery doesn't have 1350mAh lol. Absolute bullshit.

[@Vrm24com]

Certainly not, but we are testing it now to see the differences after six months. The first tests were excellent.

[@bryangamez8848]

@@Vrm24com how excellent we talking? 4x longer then then original 380 mAh? 3x better?

[@Vrm24com]

No, until physics rules and laws exist ) Anyway, I think +25% (compare with the samsung orig) at the start and after half a year we are in the middle of the process, so we need more tests. watch it - kzbin.info/www/bejne/m6HainiGnpKtgJI

[@West3rror]

1350mAh battery?!😂 Now that's a scam!😂

[@Vrm24com]

Hi, maybe, but the battery works fine. Anyway, it works strangely - for the first seven months it held a charge for 4 days, then it started downgrading a charge to 1.5 days and after 2 years it still holds these numbers.

[@West3rror]

@@Vrm24com That's about the experience I had with the original battery. Still holds over 24h today and never changed battery. But going to change it to a new original now before they remove all support for it but I need a tri-tip first.

[@mcalburvlog4921]

youre not a good tutor you made s3 frontier damage youre so fast,