Samsung SCX-4200 Fix paper jam error

Laser Printer paper jam fix problem:
The key point to fix the error is that the original protective foam on the tigger became sticky because of the its age, we only need to remove or clear the sticky glue with alcohol or any means, no more sticky effect would then affect the normal function of the magnetic trigger. Then the problems of paper jam would be solved in such cases.

[@patricioperez8047]

Certified it worked on a SCX-4300. Used some masking tape over the little sticky part.

[@diytrendmaster]

Yes, you've done that right, the original protective foam became sticky because of the age, we only need to remove or clear the glue with alcohol or any means, no more sticky effect affect the function of the magnetic trigger. Then the problems of paper jam would solved. Sorry I don't have time to translate that with English subtitles...

[@steviedfromtheflyovercount4739]

Thanks for posting this video. God Bless.

[@Quazey]

Thank you, this fixed the same issue (paper jam whenever printing with more than one page at a time) on my SCX-4623! Took a bit of extra disassembly as a circuit's in the way. What I understood is that the electromagnet seen at 9:05, should hold the metal close to it when current is going through it, and release it when the current stops, but it was a little sticky and the metal stayed on it for a half second until the spring pulled it away. You just need to clean that, I also applied a bit of talc powder. I'm not sure if greasing the gears is necessary. Reassembled and it all works!

[@diytrendmaster]

Yes, you've done that right, the original protective foam became sticky because of the age, we only need to remove or clear the glue with alcohol or any means, no more sticky effect affect the function of the magnetic trigger. Then the problems of paper jam would solved. Sorry I don't have time to translate that with English subtitles...

[@tonyweavers4292]

Brilliant video. As soon as I learn whatever your language is, I'm straight on it!

[@diytrendmaster]

Thanks for your comments Tony, I don't have time to put the subtitle on the video during that time . The key point to fix the error is that the original protective foam on the tigger became sticky because of the its age, we only need to remove or clear the sticky glue with alcohol or any means, no more sticky effect would then affect the normal function of the magnetic trigger. Then the problems of paper jam would be solved in such cases. BTW, my spoken language is call Cantonese which is the most common dialect used in Hong Kong, the other will be English or Putonghua (Chinese) . ;-)

[@robotduck77]

This fix works on my Samsung SCX 4623F .. Thank you so much

[@williamleong6447]

Thank you so so so much for posting this video. It works perfectly for my SCX-4300 as well. Thank you and all the best!

[@helenahung1945]

I am so pleased to see a Chinese person doing the demo on this subject haha! It's just that my printer is of a newer model, but eventually I managed to pull the paper out. I will not recommend Samsung printer in the future. The paper jam problem happens from day 1!!! Its a new printer for god's sake.

[@92000]

Samsungs are overrated. It was always sh*tty brand. Xiaomi is much better. Chinese products are getting better every year

[@georgevenieris7161]

Thank you ! Worked like charm for my SCX-4200

[@tonymoliterni]

Muchas gracias. pude resolver el problema en mi del papel atascado Samsung SCX 4100. Execelente. Estoy muy agradecido. Saludos desde Argentina.

[@kioskiescoladeprofissoesea7454]

congratulation my friend, if you insert english legend is very nice for all the world

[@diytrendmaster]

Thanks so much. This printer is great and there is no need to throw it away if you can fix some minor problem. Sorry for that I have no time to put the English subtitle on the movie 😅🙏

[@choiceva]

My SCX-4623 has same problem, I fixed it working good. Thanks!

[@ofsabir]

Can you tell me what did you exactly do? I have the same machine and can not solve it.

[@choiceva]

Watch carefully and follow directions 8:25~12:00

[@VYqANwd1yHt8kYMQ0vhnPDhHxYblG7]

Thanks for your video. I'm going to fix my Samsung SCX 4300. You may consider to have English caption [cc].

[@f.h.9606]

Hello Victor, could you please put a short summary in the description what you did to repair the printer? Thanks, Felix

[@MrDeejay230]

it works great thank you very much, it confirmed that I have a dirty printer and pay for 50 euros

[@francisconunez6017]

gracias, buena explicación

[@StefanoGottardo]

grazie aver sostituito lo spessore sul sensore con un pezzetto di nastro isolante sembra aver risolto l'inceppamento che accadeva dopo la stampa della prima pagina!

[@meltvanaarde4160]

Nou verstaan ek pragtig. Baoie dankie hoor

[@diytrendmaster]

jy is welkom

[@drpardalsilverio1995]

Melhor video que assisti. Parabens

[@diytrendmaster]

The white lubricant is better, the time I don’t have, so I use the yellow one which is for metal rather than plastic.

[@narcelio]

Thanks, it worked!

[@axakias]

What did you do? You put electric black tape to the upper side of the sensor?

[@gameoverman9610]

IF IT IS PAPERJAM/OPEN DOOR 0 just clean the gummy roll in the middle which grabs your fresh paper, mine was dusty, Use your finger, or a bit of bubblegum to get it all away. In the middle, approx 1 cm is a drum which grabs your paper.

[@josemaldonado1338]

bien hecho amigo, o único que me parece que lleva menos grasa fue excesivo en algunos casos.

[@krittimaklangwang7677]

Thanks a Lot

[@josuejrgramos]

As dicas me salvaram Impressora funcionando !! Tks it was I understood what was being takled. But it help me solve the problem

[@ShayB]

Voce saberia me dizer pq ela esta puxando umas 6 folhas de uma vez so

[@josueramos3521]

@@ShayB It is possible to see the video, open and fix the problem, even it is spoken in chinese

[@ayandamavi8357]

Hi please if possible do a video about Samsung SCX 4623f paper jam inside the machine but there's no jam visible

[@diytrendmaster]

Sorry I don't have that model, but if they have similar issue, the problem might be the sticky-form near the trigger that trigger the immediate stop of sending paper module, please check if there are any triggers near the paper roller 😅, you may find a solution of that.

[@Jasveer1991]

I have scx 4300 model.. when i give print command printer take paper and action like print but blank paper out without nothing print . Print not giving any error

[@pam8352]

my printer gears get stucked after 2 rolling.

[@diytrendmaster]

Once I have time, I would put English subtitle on it for easy reference. Thanks for the reminder.

[@xzactlly]

Hi Victor, may I know what is the yellow lubricant that you are smearing on the gears?

[@Fırat-t5g]

Subtitles would be nice :(

[@davidronson8712]

it will be wise to write the whole video is in Chinese.

[@ВинниПух-ж7р]

за кадром кто то на горшке сидит тужится постоянно :)

[@parvinkharazi9042]

In jerman

[@pisay777]

Не хороший кашель