Samsung Slim Fit Wall Mount on Samsung QN95B

Samsung Slim Fit Wall Mount geni.us/brMJbDB
The same process for 2023 as 2022 and 2021 Samsung Slim Fit Wall Mount, on a Samsung 55QN95B. It's actually the wall mount from last year which continues this year. The only thing missing is the dimensions for 2022 and 2023 but you can measure the bracket when on the TV to find them out.
For the more in depth slim fit wall mount installation • Samsung Slim Fit Wall ...
Top tip to make the bracket click down easier 02:30

[@nafnaf0]

4:54 this helped a lot. Pre-snapping the brackets is a good trick

[@dominicphillips7587]

You're a life saver. Thanks for doing this. Was completely confused until watched this

[@TellyDan]

Thanks Dominic

[@jeevanraj6937]

You are a saviour. I’m a new owner of this tv and wall mount. Was figuring out how to install this and the features of this wall mount, glad to have found this!

[@TellyDan]

Glad it helped mate

[@pinkoddballs]

Likewise! Also meant I could nick your measurements 😂

[@vasu171399]

No one explains to us with so many details as you do Dan.

[@TellyDan]

Thanks Srinivasan

[@IsidaKarpuzi]

Thanks for this video! You did not need to drill through a stud?

[@edwardcroote9588]

Thanks Dan. Worked a treat!

[@TellyDan]

Thankyou for watching, glad it helped

[@Tigerratcat]

Nice vid. Id also like to know if this fits the s95b

[@marsbound2024]

Super helpful video. Thanks a lot, sir!

[@PacHunter80]

Can you add led lights behind the tv with these flush mounts ?

[@Uuuung]

@The TV Dan Can i use this wallmount also on the QN90B? You did not use this on the QN90B video you have with the 85 inch, even if this wall mount should support 85 models.

[@SteveMassart]

Thanks v useful. Going to attempt this afternoon 👍🏼

[@TellyDan]

Thanks Steve, I think you'll be pleased with the results

[@steviekek]

I am thinking about making a wall feature, can you tell us where your nice heavy duty mdf board is from please

[@asck4790]

Is it possible to do a 25 mm gap? Or do you just got these 2 options with 7.5 mm and 15 mm?

[@Uuuung]

Thank you so much for this video, so helpful :)

[@TellyDan]

You're so welcome!

[@MaSe224]

Hi, you didn't use the Parts N1 and N2, is there a reason for that or are they simply not necessary for this model? Thanks!

[@aaronk1129]

Does it have to click back to the magnets? Cables behind tv don’t really allow for it. Wondering if it’s rating is only when magnet is engaged.

[@Kr-ytb]

Can i use the middle two hole two install in these brackets? I have got s95c as a replacement of s95b so my frame is aligned as per previous model ?

[@esav7055]

Hello, can we move it left and right after hanging it on the wall?

[@Robin-Visser]

How will this this affect the sound from the speakers?

[@lutenus9627]

Thanks for the Video!

[@2loco]

Brilliant. Thank you good sir.

[@iftachholander9965]

I have a Samsung QN95B and I did not receive such a device. Where do I buy it? product in the food is currently unavailable. thenks you

[@paulfwsjones]

Brill vid thanks bud!

[@MrTupeloFlash]

Perfect tutorial , Thank you. When you wall Mount this TV, is the rear speaker performance affected at all ? , please advise , thank you

[@knn3th]

I can't imagine the sound getting any worse than it already is. If you want to enjoy your tv, I advise to always use a soundbar or home cinema system. These flat tv's sound awful.

[@AcenFr]

I used this guide for the 65S95C, pretty much the same thing tho it’s not written S95C in the guide. We stick their template on the wall to make it easier, and we used our own screws.

[@tommoit6082]

Thank you so much for your comment. I watched this video hoping it would confirm this set up would work with my 65” S95C. You’re a life saver as I’d already bought it before checking! Doh! 😂

[@Mr-zu4bv]

​​​@@tommoit6082So there is no difference between this wall mount (WMN-A50EB/XC) from year 2021 and the new (WMN- B50EB/XC) from 2022 😭 ? I noticed it that the product pictures are the same, but still bought the expansiver B50EB/XC because I wasn't 100% sure and couldn't find infos about this. According to the description, in the video we see the 2021 version.

[@BigQuarterK7044]

I’ve noticed that the one connect cord pushes the bottom of the tv away from the wall. How did you circumvent that?

[@Mr-zu4bv]

@@BigQuarterK7044 I mounted it and didn't noticed a problem. The minimum distance is 7.5mm anyway. You mean the cable or the thing which is plugged into TV?

[@BigQuarterK7044]

@@Mr-zu4bvthe cable. When I push the tv into the wall to click it in the cable forces the bottom half of the tv forward

[@dreameroscar]

Will this work with 85” Samsung Neo QLED TV 8K QN900C QN85QN900CFXZA? Thank you

[@skhandkar3240]

Will this mount work for Samsung QN90C 75" TV (20230?

[@raymondrodrigues8351]

Will the slim fit wall mount work with the QN900C?

[@shush97]

Hi, would this be compatible with the Samsung s95c?

[@bystrzakk]

Whats the bolt size for vesa mount?

[@tookph]

Can you put this on a Qe75q65b please? Thanks a lot

[@matthoment3090]

Hi, thanks for the video - are you able to confirm whether there is enough room between the wall and the screen to mount the one connect box?

[@knn3th]

The One Connect Box isn't meant to be mounted between the wall and the screen. You can mount it on the stand, or place it anywhere you want within the reach of the One Connect Cable (a longer cable is delivered as standard with every TV that has the One Connect Box).

[@nevercontact]

Can this be used for 85” QLED TVs?

[@Nasahatapimapetilan]

Thanks Samsungs description about compatibility is so confusing. Is the sound still working good so near to the wall? asking because of the backfiring speakers.

[@TellyDan]

Yes the sound works well

[@johnrambo1294]

Can install normal bracket

[@yodrw1885]

is this okay for plaster wall?

[@chris2vallen729]

77-in S95C next slim-fit TV mount hide cable behind wall exit 1'-2' ft from the floor

[@valfikhter]

Thanks a lot.

[@TellyDan]

Thankyou

[@box4aza]

Thanks!

[@paulkhavkine8075]

Can you show the same mount with S95B?

[@freecableguy]

Hey, did you manage to find out if it works for the S95B?

[@RaudiRaul]

I’m wondering this also. As there are no mounts on the upper part of the tv and only on the bottom center part where the speakers and such are.

[@roeeturgeman6398]

It fit on qn90b ?

[@edwardcroote9588]

Hi Dan - Just unpacked my bracket and the square plastic pieces that the screws go through into the TV are not loose. They are fitted to the TV side bracket and clipped into place. The instructions seem to show just leaving them there and screwing through whereas your video has them loose. Should they be clipped in with the small arm clips or should they be free. Just wondered if this affects how the TV adjusts once in place? Thanks for a great video.

[@TellyDan]

Hi Edward, if you have the dimensions already you can leave the spacers as they are, if you don't have the dimensions do what I did with them loose so you can measure correctly. When you mount the tv the spacers will go loose to their natural position. Hope this helps.

[@jaroslawurbanek]

great job 👍👍👍👍

[@usrfin3192]

May I know how many cm between the tv and the wall, im afraid that it is too slim for the power plug and wires. Thanks

[@knn3th]

7mm

[@mhoum3163]

Does this fit the 65qn95a?

[@grask10]

I have QN95B (2022 year model) and you can just use the included template for 65" TV and put it on the wall, no need to do all these measurents on the wall

[@BigQuarterK7044]

How do you run the one connect cable to the slot without pushing the tv away from the wall? Do you have to place a hole in the wall directly on that spot?

[@knn3th]

This mount leaves a 7mm gap between the wall and the tv which should be more than enough for the One Connect Cable.

[@iftachholander9965]

Vere good explanation

[@TellyDan]

Thank you

[@BienvenueEnChampignonie]

Hello.thanx Why don't you use the hole inside the tv since on the manual paper we can see that for qn95a (so qn95b too?) we have to use the inside hole ? Why are you measuring everything and report to the wall the measures , since there is normally a template in the box that we can put temporary on the wall to see immediately where to make the holes in the wall ? It should be much easier thant measure and write everything on the wall Thanx for your anser

[@susielund1030]

@@Stasegin Ty for the reply. The reason i had to ask was that The TV DAN say in the video you can use both middle and wide. So you can use the middle, but should use the wide?

[@susielund1030]

@@StaseginAh, I understand. My old TV had a wall mount in the center, so I had to set up an additional plate on the wall to ensure that the drywall could support the weight. I was hoping to use the same plate by using the center mounts on the QN95B 75-inch TV, to avoid having to install in the corners. However, the Slim Fit wall mount here is not really designed for our TV, so it might not be wise to gamble with the center mounts in that case.

[@susielund1030]

@@Stasegin So there is a possibility that the TV might not fit flush against the wall and could be slightly crooked if there are small gaps between the TV cover and the frame. However, I'm planning to try mounting it using the middle holes and I hope it doesn't crack and fall to the floor, haha. Thank you so much for taking the time to answer my questions, I really appreciate it :)

[@fabiankress672]

Would you rather recommend the middle or the wide holes?

[@alexanderv4609]

Please advise, if you use slim fit mount, does this in any way impact the sound quality?

[@richdxb4012]

Hi Dan, would it be possible to add an extra 2-3mm spacer - so that it gives a gap of at least 17mm for Philips Hue Light strip?

[@bartspruit2449]

I’m curious as well!

[@TellyDan]

You should be able too

[@richdxb4012]

I did so and it worked great!

[@jlhw0619]

Do you think this mount would would with tvs from other brands like LG or Sony?

[@Eepsheep]

I also was wondering if I could use with other tvs - like the LG Ai thinQ, for example.

[@JasonKhehra]

Does this only work with TV's that have the One Connect Cable? I have a 2021 QN90A 85". Is there enough room to plug all the cables in? Seems like it would be really tricky...

[@TellyDan]

Hi Jason, yes you can do this on the qn90a and set a 15mm gap for your cables

[@krummstadt]

is this slim fit mount compatible with Samsung S95C 65 ' ?

[@TellyDan]

Yes it is

[@samnichols]

What hieght down are the mount holes for the 75 in model?

[@bigmaggone7875]

i have the same question.. does it also works with 75"

[@WOLFBRONSKY]

Any idea why it’s not staying when I try to adjust it after installation? It’s not quite level but when I adjust it to be level it doesn’t stay.

[@JSG517]

I just installed this mount with my 77S95C and it too won’t stay put when making slight adjustments. It wants to drop back into its default position.

[@susielund1030]

Can someone please confirm. He attack the brackets wide to the outside in this video. Is it possible to attach the brackets to the middle vesa mounts? I have the 75 inch.

[@TellyDan]

Hi suspension, it is possible to attach them to the inner vesa mounts, if your tv has them on the outer though attach them there. The weight spread may be better.

[@susielund1030]

@@TellyDan But is there a risk using the midde vesa mounts for the QN95B 75 in your opinion? In the video you say you can use both I think. My old TV had a wall mount in the center, so I had to set up an additional plate on the wall to ensure that the drywall could support the weight. I was hoping to use the same plate by using the center mounts on the QN95B 75-inch TV, to avoid having to install in the corners. However, the Slim Fit wall mount here is not really designed for our TV, so it might not be wise to gamble with the center mounts in that case.

[@filipvavra6177]

isn't there a problem with the sound when the TV is right next to the wall?

[@Atishaya_Jain]

I am also looking an answer for that

[@PUUKAHOONTTASS]

Hey, do You guys hear like a mosquito Sound When the tv is of from the one Connect box ??

[@MoebiuZ]

Mine does every few seconds.

[@scentsei8201]

How come this qn95b only has 6 speakers on the back? In Denmark it has 8.

[@countreeso]

This is 55”. 65” has 8 speakers.

[@Mayhemz.95]

Is this suitable for the 77 s90c? Also how safe is it and is there any alternative wall mounts that are easier to install?

[@zenshakujo8070]

Did you mount your s90c with this system?

[@Mayhemz.95]

@@zenshakujo8070 no I haven't got around to walk mounting yet ha

[@rubayth]

@@Mayhemz.95any update? I’m buying the same tv and wondering if this mount is compatible.

[@karengs3941]

Hi, were you able to install it on the wall? I can't find any compatible support

[@jessesaylor4641]

Is this pretty much the same install for a 65" QN800B?

[@TellyDan]

Yep, pretty much

[@giainhailoan679]

Is it included with the TV or do I have to buy it separately?

[@knn3th]

Buy seperately

[@toshyt]

Hi Dan, seeing as Samsung do not ship one with a 2022 QN95B in the box, is there a part number for this bracket so I can have a look elsewhere?

[@chevli]

I believe it is WMN-A50EB/XC.

[@toshyt]

@@chevli cheers ☺️

[@NoWayJose0_0]

The only tv that comes with the wall mount is the frame but yes you can buy it separately

[@toshyt]

@@NoWayJose0_0 cheers ☺️

[@rjejames28]

They really don't include a paper template???? Do they hate there customers?

[@charliewright1009]

Ive just received my samsung s95c 65 inch and want to put my own third party table top stand on it as i dont like the pedestal stand it comes with. What size screws do i need ive been looking for ages but cant find a solution?

[@velvetteloverr]

When a astronaut space engineer biological chemical scientist building archaeological architect puts up a video on how to install a simple wall mounted TV 😂😂😂😂😂😂😂😂😂😂😂😂😂😂

[@TellyDan]

I was a mechanical engineer as a time served apprentice while helping with tvs as a side job

[@kuldipsingh366]

How far does the TV sit from the wall?

[@knn3th]

7mm

[@PonsaravananKPN]

How attach the one connect box for a wall mount???we can attach or seperate ???plz expalin anyone plz

[@langemike]

Of course the one connect box will be placed below your tv, hidden away in your furniture. There is no room the mount it at the back of your tv. Of course, this is the benefit of having the one connect box. You get a short and long cable for the one connect box. The short is used when you attach the one connect box to the TV stand it gets shipped with. The longer one is used if you use this wall mount. It's somewhere around 1 meter at least in length i believe.

[@PonsaravananKPN]

@@langemike thanks for the solution

[@O.t]

Will this work for the QN800B 75”?

[@TellyDan]

Yep same principle

[@user-sx7il5ev7v]

N7314=4

[@DrMJJr]

Will this work on the S95C??

[@davidroberts5832]

I have just ordered the S95C from Samsung and double checked with a sales person at Samsung and they recommended WMN-A50EB/XC It costs £149.00 directly from Samsung

[@chris2vallen729]

We use feet and inches standard measurements 1' 1/2"

[@ong55663]

WMN-B50EB?

[@Uuuung]

take a look at his wall mount for QN95B video, it has the name in the video

[@user-ei4hb8uv1x]

고객집 벽에 저렇게하면 난리나요

[@bbaaspencer1]

Every couple minutes, I got a 1 minute ad! I left 😡

[@EverGone03]

its crazy that it has PLASTIC spacers

[@abdullah_7assan]

This is not 95B This is 75B Because it looks small compared to your hand

[@TellyDan]

Yes it is, QE55QN95B

[@danender5555]

QN95B is a model range, not the screen size

[@tordb]

Good lord. What a nightmare.

[@DrMJJr]

Weird seeing an Asian guy with a British accent lolol

[@michaelbula9579]

Can I use this bracket on the NEO QLED QN95B 85” ?

[@TellyDan]

It's a larger version for that tv