sandblast engraving stone sign

  Рет қаралды 40,105

Slangin FBA

Slangin FBA

Күн бұрын

Пікірлер: 70
@melmorris134
@melmorris134 2 жыл бұрын
I love that Morph joins us towards the end of the video 🥰
@wendiwoods1594
@wendiwoods1594 5 жыл бұрын
This is the most informative video I have found on the process! Thanks
@slanginfba3117
@slanginfba3117 5 жыл бұрын
Thanks!
@muletowndumpsters
@muletowndumpsters 3 жыл бұрын
I concur! I have all of this equipment for 3 years and haven't did anything. Now I need to understand more about printing. I paid 3 grand for this SCM cutter!
@SN-dy4rp
@SN-dy4rp 2 жыл бұрын
The link you have provided for the vinyl plotter is no longer available. Would you be able to refer us to a new one that would be capable of this?
@Axel103Axel
@Axel103Axel Жыл бұрын
@@SN-dy4rp any luck?
@rickchaidez1062
@rickchaidez1062 5 жыл бұрын
Probably the best video I've seen on this, thank you
@slanginfba3117
@slanginfba3117 5 жыл бұрын
Thanks
@yourunclesam6780
@yourunclesam6780 Ай бұрын
wonderful job
@randygoforth
@randygoforth 6 ай бұрын
I tried using elmers glue about 20 years ago, kept having trouble with the stencil not sticking very well (as shown in your video). Since then, I have been using Anchor 211 stencil filler on the rocks and bricks. Cleans off with mineral spirits. Don't like taking chances with the stencil coming up. And, with the stencil I use, I always weed first, then apply to the stone. Good video though.
@stacylefler86
@stacylefler86 4 жыл бұрын
Oh ya I forgot, awesome work your sigh turned out great.
@kabzak
@kabzak 4 жыл бұрын
Nice work! Great instructional video! Thank you for sharing.
@mayyouprosper8140
@mayyouprosper8140 5 жыл бұрын
What mill is the sand blast vinyl. Which should I buy
@kinannisan
@kinannisan Жыл бұрын
Abrasive alloy, terlihat sangat tajam, 70 psi sudah bisa melubangi dengan cepat, sangat bagus.
@VSW2020
@VSW2020 3 жыл бұрын
It's always good to heat the stone evenly with a heat lamp in cold weather before you lay the rubber down to prevent lifting but great video! One question why the glue first?
@396fab
@396fab 5 жыл бұрын
Thanks for this, very helpful!
@fredguess7702
@fredguess7702 4 жыл бұрын
I love it it turned out nice. I think you forgot the EST 1972.
@charleygrossnicklaus4278
@charleygrossnicklaus4278 5 жыл бұрын
awesome video been wanting to do some of this I have done yettis and bottles and regular vynil worked fine but didn't work on stone very good video tank you
@slanginfba3117
@slanginfba3117 5 жыл бұрын
Yeah, when I started I tried regular vinyl with terrible results! Sandblast stencil is so much thicker and rubbery, but much more expensive!
@ClintEvans
@ClintEvans 10 ай бұрын
Thank You.
@Squ965
@Squ965 3 жыл бұрын
Great video! Just wondering what sandblaster from Harbor Freight did you use? And or which one do you reccomend? Thanks in advance...and than you kindly.
@sors1599
@sors1599 4 жыл бұрын
I’m sure you heard this once before but you forgot the EST.1972 🤫
@Zuki4x4x
@Zuki4x4x 4 жыл бұрын
Hello and thanks for sharing the video, your link to the plotter appears broken. Can you please provide what plotter you used? Thanks!
@bretwayman330
@bretwayman330 3 жыл бұрын
What type of paper did you use
@AlabanzasyAdoración7
@AlabanzasyAdoración7 2 жыл бұрын
is the glue just to make it look shine and clear?
@mojidoesthings4072
@mojidoesthings4072 5 жыл бұрын
I have never seen anything even vaguely related to this, nor do i know what it is but i get the basics. What is the water glue mixture for?
@slanginfba3117
@slanginfba3117 5 жыл бұрын
The glue mix is for easy removal of paint that bleeds through the stencil. It will wash off with water and give a perfect crisp line! Thanks for watching
@curtnelson3282
@curtnelson3282 4 жыл бұрын
what type of transfer design mat/paper Do you recommend?
@ihelpdogs
@ihelpdogs 5 жыл бұрын
Question: If you're going to paint the cut out area, why sandblast it first, why not just spray paint it?
@fred.alfred
@fred.alfred 5 жыл бұрын
you can see the difference at 8:00 in the vid.
@vitalijalikov2413
@vitalijalikov2413 5 жыл бұрын
Hello, please write what compressor do you use? and how many atmospheres do you put? thank
@johndecowski9352
@johndecowski9352 5 жыл бұрын
You forgot the est 1972 other than that great video
@pratapgupta6650
@pratapgupta6650 2 жыл бұрын
Great technology
@curtisriffey5157
@curtisriffey5157 5 жыл бұрын
What program do you use to design your mask ? What’s your favorite font to use ? Great work I love that.
@joeydelrio
@joeydelrio 3 жыл бұрын
i want one, how much would something like this cost me?
@soyebravat8903
@soyebravat8903 2 жыл бұрын
what psi would you use for granite?
@brianmedeiros417
@brianmedeiros417 5 жыл бұрын
I like that you didn’t blast the established date. Would’ve been too crowded.
@fred.alfred
@fred.alfred 5 жыл бұрын
Rust-Oleum High Performance Paint. Oil-based Enamel. No first coat or sealer...
@kenpatterson5330
@kenpatterson5330 5 жыл бұрын
what mask do you use? do you have a link for the supplier?
@slanginfba3117
@slanginfba3117 5 жыл бұрын
amzn.to/2EVGW1y
@thewoodpecka1252
@thewoodpecka1252 2 жыл бұрын
The link is down. Can you share another link or tell us the type of mask?
@stephaniesazama-schneck1010
@stephaniesazama-schneck1010 3 жыл бұрын
If I needed to fix the paint on a neighborhood rock sign, what paint do you recommend? Also is there a sealer I could put on to protect the paint. We live in the midwest. The rock sign was installed in December and 6 months later the paint is already chipping off. Thanks
@slanginfba3117
@slanginfba3117 3 жыл бұрын
I would use one of those little bottles of testors enamel paint and a brush for something like that... what kind of rock is it? I would avoid sealing it regardless of type. I'm In iowa, and have had no problems with paint. Maybe it was a poor Quality paint to begin with. Best of luck!
@stephaniesazama-schneck1010
@stephaniesazama-schneck1010 3 жыл бұрын
@@slanginfba3117 Thank you so much for getting back to me. I believe it's Lannon Stone. It's from a quarry just up the road. Do you suggest brushing off the current paint and starting fresh or just painting over what's there? Again, thank you so much!
@slanginfba3117
@slanginfba3117 3 жыл бұрын
@@stephaniesazama-schneck1010 use an abrasive brush or pick to get any existing flakes off, make sure its clean and paint away!
@suboriahinton9999
@suboriahinton9999 3 жыл бұрын
What kind of paper are you using to cut your stencil out
@israelgonzalez171
@israelgonzalez171 2 жыл бұрын
Any part number or link on the sandblaster
@paulwheeler4551
@paulwheeler4551 5 жыл бұрын
Great video . What is the glue you use at the beginning is it pva glue?
@slanginfba3117
@slanginfba3117 5 жыл бұрын
Yes, it is watered down
@craftsmanchris7
@craftsmanchris7 2 жыл бұрын
What type of paper you used?
@BackYardFiles
@BackYardFiles 5 жыл бұрын
Thank you for the video! How does the sandblaster not tare through the stencil?
@slanginfba3117
@slanginfba3117 5 жыл бұрын
It is a rubber type of material. The sand bounces off
@BackYardFiles
@BackYardFiles 5 жыл бұрын
Oh wow, that's cool. Thank you for sharing and replying so quickly. Where do you purchase it at?
@BackYardFiles
@BackYardFiles 5 жыл бұрын
Sorry, I see it now in your description. Thank you
@muletowndumpsters
@muletowndumpsters 3 жыл бұрын
Where can I find those stones?
@nanoblasting
@nanoblasting 4 жыл бұрын
nice
@hfhfhwiwii5462
@hfhfhwiwii5462 3 жыл бұрын
Where do you get the stone from?
@g00dstuff101
@g00dstuff101 5 жыл бұрын
What sand blaster do you use?
@slanginfba3117
@slanginfba3117 5 жыл бұрын
It is a glastar pressure blaster. I started with a harbor freight sandblaster and upgraded only because I got a great deal on the glastar.
@cesarflores8561
@cesarflores8561 5 жыл бұрын
Are you doing sandblasting? Let me know this is an old video.
@mitchellhigley8809
@mitchellhigley8809 5 жыл бұрын
Where do you buy the stone??
@Axel103Axel
@Axel103Axel Жыл бұрын
Can someone tell me waht kind of sandblaster i need
@slanginfba3117
@slanginfba3117 Жыл бұрын
Any type will work. I would go with the tank style sold at harbor freight, or any hardware store
@Axel103Axel
@Axel103Axel Жыл бұрын
@@slanginfba3117 thank you for the reply any recommendations on what brand .kind .tipe of sand to use
@slanginfba3117
@slanginfba3117 Жыл бұрын
I use Black blasting sand. It's like $12 for a 50# bag. Found at harbor freight and menards near me.
@zekereardon2074
@zekereardon2074 5 жыл бұрын
Great job. You do amazing work. What type of media are you using?
@slanginfba3117
@slanginfba3117 5 жыл бұрын
Thanks, The media is Black diamond, Its coal slag. But fine Mason sand or sifting regular sand will work also..
@srobins05
@srobins05 5 жыл бұрын
@@slanginfba3117 how much did you end up using for a project this size? Thanks! :)
@MrGetBad4u
@MrGetBad4u 4 жыл бұрын
What kind of vinyl is that you are cutting? 60 degree blades normally are for "special" types of vinyl. Is that just a normal calendar vinyl? Or something else?
@stacylefler86
@stacylefler86 4 жыл бұрын
What type of paper did you use that would stand up to sandblasting?
Mike’s Makers: Engraving with a sandblaster
9:50
East Idaho News
Рет қаралды 6 М.
У вас там какие таланты ?😂
00:19
Карина Хафизова
Рет қаралды 13 МЛН
How to Use Every Dremel Bit
20:02
Log's Carving Club
Рет қаралды 762 М.
Sandblasted Sign
8:19
Inside My Shop
Рет қаралды 46 М.
Blast Cabinets & How To Select Blasting Media
21:00
Pete's Garage
Рет қаралды 296 М.
Sandblast Halftone Photo onto granite
17:14
Sandcarving
Рет қаралды 1,1 МЛН
Sandblasting Stencil shootout ANCHOR VS HARTCO VS UBLAST
15:14
-TheGravestonePros- North Country Memorials
Рет қаралды 860
I Carve A Landscaping Rock (and other shenanigans)
9:16
Bobby Duke Arts
Рет қаралды 12 МЛН
Detailed Concrete Sandblast Stencils!
5:40
Deco-Crete TV
Рет қаралды 10 М.
У вас там какие таланты ?😂
00:19
Карина Хафизова
Рет қаралды 13 МЛН