Wow what an honor to watch the Goat and his mech work on the bike, which I am surprised weighs in at 39.5 lbs
@Montblanc19864 жыл бұрын
Congratulations Greg on the outstanding race in Portugal!
@АлексейСТАРИКОВ-ч2ш8н2 жыл бұрын
Супер профи мастер! 👍 Супер профи 🚲 Bike. Santa Cruz V-10 - - 🐴 конь всех времен и народов вселенной! Благодарю вас за видео и работу!
@fadzrulhelmi97183 жыл бұрын
Congratulations for the 2021
@oderfla33573 жыл бұрын
Excelente Ensamblaje, y muy buena preciso.
@worldofmtb3 жыл бұрын
Great you like it! :)
@kristozondagh Жыл бұрын
So therapeutic.
@oderfla33572 жыл бұрын
Un excelente mantenimiento.
@worldofmtb2 жыл бұрын
Great you like it! :)
@lazlo25114 жыл бұрын
Go Greg we love U!- all the best from South Africa.
@pclouw3 жыл бұрын
Whos sais us South Africans can't do anything right😎😎Carry on you Legend Greg Meneer.. I am also hapoy to be a 'KZN' boy !!!!!
@brojackchannel70473 жыл бұрын
BeautyFull DownHill Bike 👍😀🖒
@worldofmtb3 жыл бұрын
Made me lough loud! :D :D :D
@conorhanley90093 жыл бұрын
Beautiful bike ✌️🇮🇪✌️
@worldofmtb3 жыл бұрын
Great you like it! :)
@JamiedoesWildBikepacking2 жыл бұрын
Could watch Marshy for hours!
@eBikeUnikat4 жыл бұрын
Schönes Bike 👌👍
@gogovitch664 жыл бұрын
worldclass vid of a worldclass bike of a worldclass rider and his worldclass mechanic ;) Thx! I couldn't see which WD40 lube has been used for the bearings and some of the axles. Can anybody help me out? Thx 🤙
@marcod67734 жыл бұрын
I was asking me the same question. At 2:55 I think I see WD Bike wet lube
@gogovitch664 жыл бұрын
@@marcod6773 I also tried to recognise which lube it is. But wet and dry lube look the same. I couldn't read it properly.
@patriceprimus43864 жыл бұрын
Yes guys, its Bike *wet* Lube
@frozensfish38314 жыл бұрын
Nice work ...
@Schevron2 жыл бұрын
How often does he do this kind of rebuild? After every race weekend? How long is the total time it takes him to do all that?
@bibiranzi81144 жыл бұрын
GRANDE Greg !!!!! 👍👍👍
@Szyszku4 жыл бұрын
I thought every mechanic hates those high pressure washes
@santacruzbicycles28414 жыл бұрын
Typically something you would NOT want to do if you are just doing a standard bike wash, but if you are just about to do a complete clean and full rebuild it's fine. The concern would be in washing away the grease/lube from all the bearings (Pivots, hubs, headset, etc.) which you definitely do not want to do, but since Marshy is about to pull apart, clean, re-lube and re-grease every single moving part, it's all OK👍
@charlesjo44354 жыл бұрын
Shimano saint 😍👍
@noelvillarba98363 жыл бұрын
its so beautiful
@lennyfellmeth78924 жыл бұрын
Always wondering What's the thing underneath the screws of the rotor is, or at least why its there🙃
@gogovitch664 жыл бұрын
they are washers for two screws at a time, so they don't bind to the rotor by heat
@akosyjonathan3 жыл бұрын
@@gogovitch66 did he using 203mm front and rear?
@gogovitch663 жыл бұрын
@@akosyjonathan I guess so
@miatamx4 жыл бұрын
What kind of lube is that? The one that you were using for the hub bearings.
@wd-40bike794 жыл бұрын
It's the WD-40 Specialist® Bike Wet Chain Lube
@frenzgraph4 жыл бұрын
@@wd-40bike79 What's the benefit of using a chain lube instead of bearing grease? He's using chain lube for wheels' bearing and grease for headset bearing!
@MatTancock4 жыл бұрын
@@frenzgraph Chain lube makes the hub noisier, more friction. More grease = softer hub.
@Hapebikes3 жыл бұрын
Werden die Bikes ohne Drehmoment zusammen geschraubt ? Are the bikes screwed together without torque?
@Hapebikes3 жыл бұрын
Ab 16:54, werdendie Speichen ohne Tensiometer nach gezogen ? Und nicht in einem Zentrierständer ? Ab 17:03, wird so der Seitenschlag überprüft ? Da bin ich aber entäuscht, hätte ich nich gedacht vonso einem Team.
@archivestoryvlogs2 жыл бұрын
i hope my mtb dream bike may do come true...
@alberthfebry24873 жыл бұрын
Nice bike 🤩
@worldofmtb3 жыл бұрын
Great you like it! :)
@alberthfebry24873 жыл бұрын
I'll wait for the next bike 🤩
@rhettcorbett33462 жыл бұрын
But how do you remove plastic shock cover????
@Petrstuka3 жыл бұрын
what´s that air cap on fork? llli?
@CMadurga4 жыл бұрын
Nice Video!! God Job!!
@isntrael Жыл бұрын
Why did marsh leave or get replaced?
@renatovieira66832 жыл бұрын
🤟🤘👍
@mazuraanuar5243 жыл бұрын
I want to have one but in Malaysia the price is very expensive. 😔
@endeavour53163 жыл бұрын
Is that axs?
@worldofmtb3 жыл бұрын
Hey Endeavour. No, it's not Sram AXS but a Shimano Saint drivetrain ;).
@eas38144 жыл бұрын
isso que é bike topp
@Brave__heart.3 жыл бұрын
The bike is my dream. Master handsome. You guys are pretty. Are there any good people? Please give me a frame you can use an aluminum jet if you don't mind
@Montblanc19864 жыл бұрын
Wheres the Goldwing with the bike tools
@padureancalin80963 жыл бұрын
Please tell me the song??? I beg of you :))
@alexanderjendreck63564 жыл бұрын
What's the issue of using Metall and resin pad? I never saw this
@aminkhorasany_46764 жыл бұрын
No issue it’s preference - metallic it works better when it’s hot and heated up it lasts longer but wears the rotor more - resin works better cooler lasts less and doesn’t wear the rotors much
@alexanderjendreck63564 жыл бұрын
@@aminkhorasany_4676 yeah ok i know because I work in a bike shop so it's yust preferred
@WhatWouldNarutoDo06114 жыл бұрын
@@alexanderjendreck6356 why you asking then ...
@errorbrd90014 жыл бұрын
I learned one kr two thinks, thx
@vov4yk464 жыл бұрын
Alexander Jendreck Greg came from motocross. That’s what he used to do there. Every time he wasn’t able to decide which one to use Marshy would put a combination of metal and resin.
@allankrogh67074 жыл бұрын
what kind of tire pressure gauge is being used.
@promodsteve78824 жыл бұрын
looks like Topeak.
@brunocotadh33114 жыл бұрын
V10💘💞🔥💪✊✌
@justoeliasdiazherrera77394 жыл бұрын
Muy Linda.
@iamjecter3 жыл бұрын
what’s the front tyre pressure?
@worldofmtb3 жыл бұрын
They get inflated to 3 bar / 45PSI and let them sit with that pressure as long as possible. The final pressure is set right before the run.
@Hapebikes3 жыл бұрын
From 4:54, are the spokes retightened without a tensiometer? And not in a truing stand? From 17:03 onwards, is this how the lateral movement is checked? I'm disappointed, I wouldn't have thought this of such a team.
@vov4yk464 жыл бұрын
Still with Marshy☺️☺️☺️😞
@Grokayou4 жыл бұрын
1+ sub
@jeffreyccv4 жыл бұрын
He uses high pressure wash lol I use windex lolol
@sc0or3 жыл бұрын
Good bye bearings...
@guspam59822 жыл бұрын
Nah he opened and regreased them after, so it's all right
@JUANKOOR2 жыл бұрын
No le veo muy fino a este mecánico 😁 Y será un crack, pero hay detalles en el montaje que no son muy profesionales🤦🏻♂️