Santisima Trinidad - part 53 (phase 1) Making The Bowsprit

  Рет қаралды 7,399

John Aliprantis

John Aliprantis

Күн бұрын

Пікірлер: 35
@hans8608
@hans8608 5 жыл бұрын
Finally someone who can explain it clearly, thanks John.
@JohnsWoodenShips
@JohnsWoodenShips 5 жыл бұрын
I am glad that you found it useful!!!
@AthanasiosAth
@AthanasiosAth 5 жыл бұрын
John, you are the best manufacturer of ship models ever!!! Bravo!!!!!
@JohnsWoodenShips
@JohnsWoodenShips 5 жыл бұрын
Thank you very much for your kind words Thanasis!!!
@Wizard010357
@Wizard010357 5 жыл бұрын
Thank you so much for sharing your build. You are the only one I've seen that explains each step. The others either just blow through the process in a couple of minutes or only show the finished build. Keep up the great work !
@JohnsWoodenShips
@JohnsWoodenShips 5 жыл бұрын
Thank you very much for your kind words!!! I wanted to make a complete guide of the build. I knew it will take months but i wanted to make something different.
@Georgeolddrones
@Georgeolddrones 5 жыл бұрын
Thanks John it’s looking excellent 👍🐕🐕
@JohnsWoodenShips
@JohnsWoodenShips 5 жыл бұрын
Thank you very much George!!!
@4englishlies875
@4englishlies875 5 жыл бұрын
And who says ingenuity is lost on the world today. Using the drawback words on the bowspirit absolutely genius it's better than doing it by hand with a file great job
@JohnsWoodenShips
@JohnsWoodenShips 5 жыл бұрын
Thank you very much my friend!!!
@cjstein2000
@cjstein2000 5 жыл бұрын
Hi John. I drill out a large block to hold the bowsprit while I add the wrapping, blocks etc. Busy today on the gun ports, error on plan as they don’t line up with the decks.
@JohnsWoodenShips
@JohnsWoodenShips 5 жыл бұрын
Hi Jim! Yes this could help a lot on the wrapping! I had the same prob;em with the gun ports at the San Juan model, it's is a pain in the a... to make it right.
@cjstein2000
@cjstein2000 5 жыл бұрын
Just realised it is not called wrapping, gammons
@JohnsWoodenShips
@JohnsWoodenShips 5 жыл бұрын
@@cjstein2000 Don't worry, i am not familiar with all the nautical terms either! :)
@johnbrock1602
@johnbrock1602 5 жыл бұрын
Is your drill turning backwards? I enjoy your channel
@JohnsWoodenShips
@JohnsWoodenShips 5 жыл бұрын
Thank you very much John!!! Yes, i put it in reverse so i wouldn't break the walnut joint. It is a very fragile piece.
@alfredopalaciosferrer7606
@alfredopalaciosferrer7606 5 жыл бұрын
Bravo mister John
@JohnsWoodenShips
@JohnsWoodenShips 5 жыл бұрын
Thank you very much Alfredo!!!
@alfredopalaciosferrer7606
@alfredopalaciosferrer7606 5 жыл бұрын
@@JohnsWoodenShips Feliz 2020
@JohnsWoodenShips
@JohnsWoodenShips 5 жыл бұрын
@@alfredopalaciosferrer7606 Happy new year Alfredo!!!
@vito8472
@vito8472 5 жыл бұрын
Hello I am new ship model maker (hobby) I just buy H.M.S. Beagle - OcCre and ordered the tools. But still have no idea what paints and sealer varnish and etc. to use (brands and property’s they mast have) And I think maybe you can help me to choose what I will need for my firs ship making H.M.S. Beagle ? Thx and I really like your videos and work.
@JohnsWoodenShips
@JohnsWoodenShips 5 жыл бұрын
Hello my friend, welcome to the wooden ship modelers! For the colors i prefer Humbrol colors. They have a big variation of colors in Matt and Gloss, also in metallic. You just have to pick the right color shade for your model according to the pictures. Now for the wood sealer i use Nitro wood sealer No 1419 and Nitro thinner. Also i use varnish for Yachts (i prefer gloss) and white spirit as the thinner for varnish and colors. I do not like acrylic colors and varnish, i use them only if i do not have an alternative. You are going to need 2 types of glue. You will need white glue for wood (the quick type ,it takes 5 hours to dry) and cyanoacrylic glue (i use the thin one). For brands you can choose anything you wish except for the colors. I buy my colors and some other staff from here : www.super-hobby.co.uk/catalog/Enamels-15186720.html
@luukderie8344
@luukderie8344 4 жыл бұрын
Hi vytautas, it will sort of up to you to try what you like most. I see that John likes Humbrol, which is imo not acrylic. Personally i only use acrylic since years. The advantage is these are water based and don,t have an odor. I use vallejo, they have different colour schemes and choices of more than honderd colours (mostly tank and aircraft oriented - stil more than enough for wood colouring - i have done more than 10 ships with them). For the hull and mast i combine them with DIY coloured varnish, for the deck, pencil dust can do wonders to weather it. Good luck
@Mwhite18231
@Mwhite18231 5 жыл бұрын
Do you have plans to make a video that goes over the materials and tools that you use or reccomend for your projects? I want to get into the hobby and it's a bit overwhelming to figure out.
@JohnsWoodenShips
@JohnsWoodenShips 5 жыл бұрын
Hi Mark! I have made already a video like this. It was one of my first videos, it is not as good as the ones in this series but you can get your information you need. Here it is : kzbin.info/www/bejne/b4LYZKWOZZyCidU
@Mwhite18231
@Mwhite18231 5 жыл бұрын
@@JohnsWoodenShips Thank you very much! Exactly what I was looking for.
@JohnsWoodenShips
@JohnsWoodenShips 5 жыл бұрын
@@Mwhite18231 Thank you very much Mark!
@koskar3242
@koskar3242 4 жыл бұрын
I've had the same problem with attaching that small piece with the right leaning (at 16:00 of the video) and i've found that the solution is to use a rounded rasp to trim the holes to the desired measurements!
@JohnsWoodenShips
@JohnsWoodenShips 4 жыл бұрын
Yes this way can work too, it will only take longer but it will be more precise.
@aminamin6457
@aminamin6457 5 жыл бұрын
جميل
@JohnsWoodenShips
@JohnsWoodenShips 5 жыл бұрын
Thank you very much!!!
@joylyn26wong98
@joylyn26wong98 5 жыл бұрын
I watch your vidoes i really like it i wish you will give it to me becuase i like many of your vidoes and subcrise
@JohnsWoodenShips
@JohnsWoodenShips 5 жыл бұрын
Thank you very much! What is it that you wish for me to give you?
Santisima Trinidad - part 54 (phase 2) Making The Bowsprit
20:27
John Aliprantis
Рет қаралды 6 М.
Santisima Trinidad - part 56 (phase 1) Making The Masts
22:22
John Aliprantis
Рет қаралды 9 М.
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 158 МЛН
San Felipe - part 42 Making The Lanterns
35:17
John Aliprantis
Рет қаралды 905
Building A Bowsprit: Part 1 - Ep. 26 [ Sailing Ixion ]
13:19
Sailing Ixion
Рет қаралды 4,8 М.
Building the BOWSPRIT [E95]
20:07
The Duracell Project
Рет қаралды 97 М.
model ship building/Bowsprit【GRANADO_45】victorymodels 1/64
17:02
Santisima Trinidad - part 55 (phase 3) Making The Bowsprit
29:54
John Aliprantis
Рет қаралды 9 М.
Santisima Trinidad - part 58 (phase 3) Making The Masts
25:14
John Aliprantis
Рет қаралды 7 М.
Santisima Trinidad cross section (OcCre) - #2
14:16
Martijn Onderwater
Рет қаралды 182
Santisima Trinidad - part 67 (phase 1) Making The Yards
30:34
John Aliprantis
Рет қаралды 9 М.
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН