Saramonic Blink 500 B2+ Quick Start | Fast & Easy Guide to Your Wireless Microphone System

[@genesissok8374]

I would like to ask about the phone app about the mic, I don’t know which one is the best set up for normal voice recording, such as sample rate, Low cut, Bit depth, can you tell me more about it?

[@SaramonicUSA]

When using the Saramonic app for recording, I tend to not use a low-cut filter unless the background noise is significant. I can always apply a low-cut in my editing software if needed. 24-bit / 48kHz is the standard I also use for recording (with any app) this will give you a high-quality hi-res recording, without taking up too much memory. You might be using another app, like the camera app or a voice recorder app. The system will put out a 24-bit / 48kHz recording to those apps automatically, so you can be sure to get a good recording without having to worry about the settings. For me, I just plugged the system in launch my camera app and start recording. I will use the noise canceling feature if it's a very noisy environment and I will rarely use the low-cut filter on the receiver only if it is extremely noisy where I'm recording. I hope that helps.

[@NHF22]

The mic and receiver is connected but wen i record with my phone i dont here my voice wen i play back the video why is that ? Wat am i doin wrong?

[@SaramonicUSA]

Make sure that you have speaker enable on the receiver set up in order to hear playback when the receiver is connected to your phone. See this to show you how: pulse.ly/3u0gemlpop Also, you want to connnect the receiver to your mobile device BEFORE you launch the video or audio recording app. This way your app knows you are using an external mic.

[@Lintang_Kayangan]

Me too 😢

[@AmeNahar]

Almost same issue but my situation different, when I go live .only use phone microphone .not the mic itself ? ​@@SaramonicUSA

[@AliFarhan-f1]

Disconnect the mic when you play back the video so that you will hear

[@AliFarhan-f1]

​@@AmeNaharmake sure that the adapter is well placed and push it to the last end

[@Bahodir_Jon]

Can I use with Smooth 5S Combo Stabiliziation? iPhone 14 Pro Max

[@SaramonicUSA]

Yes, in vertical mode it should, but in horizontal mode it doesn’t look like there is enough clearance unless the arm extends. When mounted on an iPhone it will extend about 2.5cm below the bottom of the phone. There may be a way to accommodate that, but you’d have to check with Zhiyun tech support.

[@جسار-ك2ح]

Hi, I bought one yesterday, but it seems that I have bad luck. I see the positive comments, but it was not with me. There is a hissing sound when recording, even when the microphone is turned off. I tried to record sound on the laptop and the microphone is off. Although the microphone is off, there is still a hissing or buzzing sound. And when I record a video, this sound affects the recording. I tried all the settings and it did not work. When I try to connect it to the phone, the phone takes my voice from the phone itself and not from the microphone. I tried to connect the microphone to the camera. It gives me a very annoying hissing sound, as if it were an electrical vibration. I do not want to return the microphone. I want to find a solution. If I do not find a solution, I will try to replace it.

[@SaramonicUSA]

Hello, This seems very odd and is likely a defect. Sorry that happened to you, but unfortunately, it does happen from time to time. Please exchange it at your retailer, as soon as you can for a new one. That's usually the quickest fix, but if you'd like us to take care of it, please email [e-mail] and we will send you out a new one fast. Thank you.,

[@AshFreestyle]

I have this mic, it seems to work with my partners iPhone but not with my Samsung which is what I need it for - is it compatible with Samsung phones?

[@SaramonicUSA]

Yes, it is. BUT some Samsung phones come with video apps that do not have good audio functionality. Thankfully there are a number of free video apps that have great audio facilities, like Camera MX. Also, you might have to set up USB On the Go (OTG) on your Samsung phone 1st to use external USB-C devices. Here is a great how to to see if your USB OTG is enabled. fixing-mostly.com/pro-howto/enable-otg-any-option-mode/#:~:text=Search%20for%20%E2%80%9COTG%E2%80%9D%20in%20the,USB%20device%20to%20your%20smartphone.

[@bernardmanarin1662]

Having issues. Accidentally unpaired the mics to the receiver but receiver seems nonfunctional all of a sudden as M and power buttons aren't working when held down or pressed. Mics are blinking but receiver won't turn off

[@SaramonicUSA]

Please contact our support team and we will help you fast. [e-mail] if in the US. [e-mail] if outside the US.

[@bernardmanarin1662]

@@SaramonicUSA Sounds good. Will do now. Thanks guys

[@PuddleJumpRay]

I am having the same issue, how did you fix it

[@andreferdiansyah1634]

How to fix it, receiver won't turn off

[@bernardmanarin1662]

@PuddleJumpRay I literally discharged the full unit. Then, I recharged it, and it basically cycled itself to work again. Try that and see what happens.

[@FabioJackson]

can i use these with headphones ?

[@SaramonicUSA]

Yes. You can plug wired headphones into the receiver and monitor in real-time.

[@umutmumay]

Merhaba bende saramonic 500 pro var ara kabloyla iphome 15 pro maxe bağlıyorum fakat kulaklık olarak görüyor. Sebebi nedir yardımcı olabilir misiniz çözemedim.

[@SaramonicUSA]

Bu doğru. Adaptör kablosunu kullanarak iPhone'a harici bir mikrofon bağladığınızda, harici mikrofon özelliklerini kullanmak için onu bir kulaklık olarak görecektir. Alıcının mono modda olduğundan emin olun ve iPhone'da kulaklığı seçerek kayıt yapabilirsiniz.

[@AliFarhan-f1]

My phone is type c and the mic doesn't work,why?

[@SaramonicUSA]

Our support team can help troubleshoot. [e-mail]

[@denzyljanneker4520]

When I hit the power button twice, I can't get the "A" channel. I can only get to "B" and no "M" what am I doing wrong?

[@SaramonicUSA]

Make sure you have both transmitters on, and out of the case. Otherwise, it won't allow you to change the volume on the other transmitter. If you were trying to get to mono, stereo, and saftey modes, that is not accessed by the power button, but instead the M button and it is the 1st menu page when you hit the M button.

[@SaramonicUSA]

See the video here for the level control: kzbin.info/www/bejne/bn-Yepl7g5WNbZosi=NbmsLY9u2y5J6XX8&t=140 And see the video here for the mono, stereo, and saftey mode functions: kzbin.info/www/bejne/bn-Yepl7g5WNbZosi=G4X6A4XvP7mJFj34 Please let me know if you need any futher help, and I'd be happy to go further.

[@muratmrt7690]

Merhaba, yemek yeme içerikleri oluşturacağım. Hangi ayarları kullanırsam çok net ve yüksek kaliteli sesleri nasıl alabilirim ? Ayarları sırası ile belirtebilir misiniz ?

[@SaramonicUSA]

Videoda önerilen ayarları takip edeceğim. Muhtemelen içeriğiniz için ideal olacaklardır. Bir test kaydı yapın ve yeterli çıktı alamıyorsanız vericilerin seviyelerini 1 ila 2 adım daha yükseğe yükseltin. Videoda bunun nasıl yapılacağı anlatılacak: kzbin.info/www/bejne/bn-Yepl7g5WNbZosi=8pLeAkmAZYePzQoV&t=166

[@muratmrt7690]

@@SaramonicUSA Merhaba, su an alıcı +9 da ve mono şeklinde ayarlı ayrıca low cut kaç olmalı ?

[@SaramonicUSA]

Arka planda çok fazla gürültü olmadığı sürece normalde Low-Cut filtresini kullanmıyorum. Arka planda çok fazla gürültü varsa bunu 75Hz'e ayarlayın, bu en iyi seçenektir.

[@barbiefigueroa]

The Left Bluelight on the Transmitter is still blinking and the output is in Mono, not stereo. I'm using it with my Iphone IOS 17.5.1. I can't figure out how to fix it. Thx in Advance!

[@SaramonicUSA]

The blue light on the receiver will blink if the transmitter is not on or not paired. So if you are only using one transmitter and have the other off or in the case, this is normal. You can turn on, or remove the transmitter from the case and the light will go solid. If you have both transmitters out of the case and on and the left side is still blinking, you need to re-pair the system. If you need to re-pair, watch the video linked here, it is cued up for you: pulse.ly/et8cxhumkx

[@BeforeandAfterTennis]

How do i adjust the input gain on these microphones? The volume is too low when recorded. I have searched through the instructions PDF (which is also not CMD + F searchable) and I couldn't find it. Please help.

[@SaramonicUSA]

Please watch the video here: pulse.ly/zlqm86vwrv It will show you how to adjust the levels.

[@workslave-y9o]

I received my B2 mic a week ago, set the dual mics to mono for a live zoom webinar interview and OMG this is an amazing product and at a silly fair price. I can only speak for how I use the product and my results but LOVE LOVE LOVE.

[@punknpretty5329]

It doesn't work. I set it as you teach but when I complete my work and trying listen my voice its just my phone microphone. Please help me

[@SaramonicUSA]

Please contact our support, [e-mail] if in the US, or [e-mail] if outside the US. We will help you fast.

[@GameKaps]

I'm having an issue, it's probably a simple fix. When I record on my iphone 10 with 1 receiver, the video playback is only producing sound in my right ear, nothing in the left. If i turn on both receivers I hear sound in both ears but I obviously don't want to hang two receivers on my shirt during recording. Can you contact me here with a fix if you know of one please.

[@nguyenbahung3602]

You go to the setting in the receiver, select Mono in Output mode and it works.

[@SaramonicUSA]

You are in stereo mode, that puts 1 mic to left and 1 mic to the right. Which is ideal for mixing later in post-production. If you are recording 1 person, or just want 2 people mixed to both left and right you want mono mode. It is easy to change, please see this part of the video to show you how: kzbin.info/www/bejne/bn-Yepl7g5WNbZosi=8BaI-ccAH9bt4ki8&t=212

[@GameKaps]

@@SaramonicUSA I ended up figuring that out but I really appreciate the quick response. If I have any other questions I’ll let you know. Thank you again.

[@mylifeisbroken34]

Can I connect the Saramonic Blink500 B2+ microphone to the DJI Action 4 action camera?

[@SaramonicUSA]

YES! Just use the USB-C adapter of the system.

[@workslave-y9o]

I noticed the video does not delve into using this slick product with a laptop (Mac M1 presently). My actual question is will these mics work as a wireless option for Zoom. We have a concave ceiling in the studio and until it gets sound treated we need a wireless option for our webinars (using zoom). Thanks for a reply.

[@SaramonicUSA]

Absolutely it will work for Zoom, as well as Teams, Skype, and more. On computers, as well as mobile devices, because of its Device Speaker Enable function. You can connect the reciever to you Mac laptop via USB-C, and in Zoom's audio settings choose the Blink 500 B2+ as you microphone source, while keeping the Mac's speakers as the speaker output. Please make sure you have the reciever in Mono mode for best results, and if you have a noisey HVAC system you can use Zoom's noise suppression or the B2+'s noise cancelling. Let me knw know if you have any other questions.

[@workslave-y9o]

@@SaramonicUSA Thank you very much for the quick reply. I ended up buying your product and am excited to play with it. If I encounter any issues I will reach out. Thank you for your tips and again your quick reply. Cheers.

[@DianRegina99]

Is the sound produced from B2 + as same as the B2 version? I saw some reviews between B2 vs Q20 which in my opinion B2, somehow, sounds better. Thanks

[@SaramonicUSA]

If you are asking about the original Blink 500 B2 system that we released in 2018, the B2+'s internal mic definitely sounds better in my opinion. If you are comparing it to the Blink 500 ProX B2, I would say the ProX's internal mic sounds better, but that is almost twice the price and has lavaliers. The B2+ does have a killer microphone and when compared to some popular wireless systems' internal mics that are $250 and even $350, many reviewers had mentioned that the B2+'s mics cound better, and I agree. I also prefer the B2+'s mic sound to the Q20. It is a great system for the money.

[@DianRegina99]

@@SaramonicUSA Thanks for your reply. I used to use B2 old version. I make vlog outside and I need a noise canceling mode mic. I think I'll go get myself the B2+ since the ProX is still out of my budget 😄

[@chinesewithMuni]

can you write best adjustment levels for one person recording on quite room ? because in video is a little hard which is the best adjustment

[@SaramonicUSA]

There is no perfect setting for everyone because it will vary by recording device. I like to start with +4 for the microphones, and level 5 for the receiver output. This works great for my iPhone 14 in a quite room, and on the street. It will work similarly on an Android phone with USB-C. When connecting to camera I would use the same settings and adjust the camera's gain so I am averaging about -12dB on the camera's meter. If you have a particularly noisy camera preamp, I'd go to +5 on the microphones and maybe 6 on the receiver, this way I can turn the camera's gain down a bit to get the cleanest signal. I hope that helps. 😀

[@liubinskydelaese869]

help! Me compre unos y el recepto se ha quedado congelado, no me permite hacer ninguna función, alguien le paso igual?

[@SaramonicUSA]

Si el receptor está congelado, intente conectarlo a una alimentación USB-C y apagarlo. Luego, vuelva a encenderlo y vea si el receptor todavía está atascado. De lo contrario, realice una restauración a los valores predeterminados. Si esto no funciona, contáctenos y le conseguiremos un sistema de reemplazo rápidamente. [e-mail] si está en los EE. UU., o [e-mail] si está fuera de los EE. UU.

[@newheights4782]

Hey guys, I was really enjoying using this microphone with my phone. Unfortunately it's not working at the moment, so I tried connecting the microphones to my camera (sony a7iii) instead, but the receiver will not connect to the camera. I wasn't having any issues when connecting the receiver to iphone, but it won't work with my camera, is there anything you'd reccomend?

[@newheights4782]

to clarify, my iphone isn't working, and my transmitter which was working with iphone isn't connecting to my camera

[@SaramonicUSA]

Please contact us at support and we will help you fast. [e-mail] if in the US. [e-mail] if you are outside the US. Looking forward to hearing from you.

[@SaramonicUSA]

Please contact us at support and we will help you fast. [e-mail] if in the US. [e-mail] if you are outside the US. Looking forward to hearing from you.

[@wthilmi]

Can the receiver pass thru charge to my phone while using it?

[@SaramonicUSA]

Absolutely. That is one great feature that allows you to film for hours.

[@rangerbaynworkshop]

I want to use stereo mode to record stereo space, like background sounds or a car driving by left to right. Is the stereo mode true stereo do this or is it just dual mono?

[@SaramonicUSA]

You could use these for stereo, but your set-up and placement has to be precise. Please see "Setups for stereo: AB" in this article: pulse.ly/nlpb2ucf4iYou could also construct a mannequin head that would hold the transmitter in the ears of the head. This might be more complicated that you want. Primarily, the stereo setting is to be used for dual mono, recording one subject to the left, and the other subject to the right. For a stereo recording, it is much easier to use a stereo recorder or mic with an XY microphone pattern, a stereo binaural microphone or head mic, or 2x cardioid lavalier mics (positioned correctly) into a wireless system. For simplicties sake, I suggest a good recorder with a stereo XY mic, they can be had for $79 and above. I hope that helps.

[@rangerbaynworkshop]

@@SaramonicUSA It's not hard to record in stereo space if you have a true stereo recorder. I've done it easily many times with my condensers and tascam DR mkiii. I also used the first DJI Mic, 30 ft apart in my yard, as well as holding them in my hands and got a stereo image. I've since sold them looking for a new mic set. Sadly, this set sounds like it's simply dual mono which is not what I'm looking for. Thanks for clarifying, though!

[@tbm_81]

Can I use it with dji pocket 3 ?

[@SaramonicUSA]

Yes. Just use the USB-C adapter from the Blink 500 B2+ and that will connect with the DJI Osmo Pocket 3's USB-C input.

[@SimonTechwalk]

While recording my video, voice volume is getting lower as moving away from a receiver. what setting do I have to adjust? it is a phone setting or Blink setting?

[@SaramonicUSA]

Hello, what likely happening is you do not have the receiver, plugged in with the mics on BEFORE you start the camera app. Most camera apps, including the ones that are bundled with the iPhone or Android phones do not have audio settings. So, what you need to do is plug in the receiver with the microphones on and then launch the camera or recording app, this way the camera app knows you're using an external microphone. If you have the camera app on before you plug in the microphone, it does not automatically change to external microphone when you plug that in. Please give that a try and let us know if you have any other problems. I would bet this is your issue and that would fix your problem.

[@SimonTechwalk]

@@SaramonicUSA Still not working, voice recording is working. but only video voice is not working on my two smart phones. It may be a Camera Setting? I tried all of them, but not working. What else can I try?

[@SaramonicUSA]

Please contact our support team via email and we will help you fast. [e-mail]

[@SimonTechwalk]

@@SaramonicUSA I figured out. I should have used Saramonic APP. I thought I could use a phone camera. No issue.

[@ProPakistani777]

Can i use this with Go Pro 10 camera

[@SaramonicUSA]

Yes, but you wll need either the GoPro Mic Adapter or the MediaMod. No 3rd party mic can be used with a GoPro without either of these adapters.

[@SovaTamag]

Does it have bluetooth conection features?

[@SaramonicUSA]

This does not connect via Bluetooth. Bluetooth would have a much lower audio resolution than the digital connections this system has via USB-C or Lightning. This system has a digital resolution of 24-Bit/48kHz, while Bluetooth would be much much lower.

[@SovaTamag]

Insted of iphone lighting give us 3.5mm jack.