I also must say: I wish that I had found this tutorial first. Very concise!
@hebrewlessons23483 жыл бұрын
I am an IT professional, but i am a newbie at coding. this vid taught me more in 11 minutes than i have learned in 10 hours of searches and tutorials!!! thanks a ton for this!
@equmed4 жыл бұрын
Wow this is probably the easiest approach for Micropython. Thanks for such a good and concise explanation.
@Pramod-wq7ef3 жыл бұрын
I faced issues in flasing my esp32 initially, but thanks to Saravanan sir for helping me out! You explained every step clearly, thank you so much sir :-)
@flaviodasilva34162 жыл бұрын
This was the best tutorial to get me started on the ESP32. (I've watched several that only let me confused) Thank you!
@ZookeeperJohnG3 жыл бұрын
I wish that I had found your tutorial first! This is AWESOME and thank you for sharing your knowledge.
@christopherpfeifer97723 жыл бұрын
watched six different videos before finding yours, which actually worked on the ESP32 dev board I have.
@williammiller41434 жыл бұрын
That was an EXCELLENT video!!! Thanks for producing it.
@jitheshkk84472 жыл бұрын
Really nice and a very good tutorial for beginner to start with ESP32 and micropython. Very well explained with simple examples
@jitheshkk84472 жыл бұрын
Dear Saravanan, Thanks for such a simple and nice explanation. Also, I have been trying to control servos using PCA9685. So far no luck. Existing firmware/codes are not supporting. When you get a chance could you please throw some light on it please (ESP32, PCA9685 & Micropython). Thanks Again
@saltycatagenda4 жыл бұрын
Very helpful. Easier and more general than the command line approach in my opinion. I have my python and anaconda installed across different drives, so using pip was a bit of a nightmare with esptools. Your approach worked with no problems, and was super simple.
@tomgburklin11124 жыл бұрын
Good install instructions. One error for me was current Thornny 3.2.7 menu was changed a little. No big deal any one should see the difference. Good job, direct to the point.
@michaelm27043 жыл бұрын
thank you, really helpful! It is such a great feeling to make it work and blink this led
@gustavoarluna37974 жыл бұрын
This is a very helpful and well explained tutorial. Thank you very much!
@DMIINC20134 жыл бұрын
Most useful video in regards to micropython for us noobs on the KZbin. Thank you.
@aristonjumagbas3 жыл бұрын
Thank you sir Saravanan for a brief yet concise tutorial, it really works for a beginner like me.
@yoonsookim16593 жыл бұрын
Thank you for nice and informative video. It replaces tons of web searching to install micropython on ESP32.
@rejectedcircuit2 жыл бұрын
Sir, you are the man! Thank you. Did not know how to send my scripts to the device...
@JoseFernandez-yz1sf4 жыл бұрын
Very good video, thank you Saravanan, concise and complete to get started with uPy in an ESP32 uC.
@MihirShahLNM4 жыл бұрын
Very useful. Thonny is very very user friendly.
@mohamedfarid74992 жыл бұрын
thank you very much Mr. Saravanan , i use complex method on one website to flash the TTGO ESP32 using anacoda promot CMD and make file name (esptool-master2) and some modification on text file to change COM to right one i have , but your method is very easy
@tomgburklin11123 жыл бұрын
good setup Thorny python changed some minor with in 30 min up and running. Thank you.
@basugango3 жыл бұрын
best tutorial to install micropython on ESP32. I have used the same on esp8266.
@drTERRRORRR2 жыл бұрын
Nice,clean and detailed. Good tutorial,man!
@NoumanAli4 жыл бұрын
I must say I don't usually like videos on KZbin, but Sir this was one nicely explained tutorial. I very much appreciate this video of yours. 😊
@yojithkr17 Жыл бұрын
Sir as soon as I minimise the Thonny IDE the ESP32 will stop execution of the code What to do?
@sameerk129823 жыл бұрын
Thank you very much Sir for this easy to understand and very helpful tutorial....Working great...succesfully setup my ESP8266 Nodemcu board.
@bennguyen13132 жыл бұрын
When you flash the REPL interpreter, where in flash does it put it... Versus, when you flash main py? Could the main script be uploaded outside of Thonny (just using a hyperterm)?
@MrTalhakamran20064 жыл бұрын
Thank you for making such a good video tutorial.
@maheshmurugan55273 жыл бұрын
You are really great for making this video
@joswarbellidorosas39563 жыл бұрын
Thank you! Awesome video!
@era.k61613 жыл бұрын
This is a very helpful and well-explained tutorial. Thank you very much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@HomeGrowEngineering2 жыл бұрын
works well. thank you
@sumanthumma27493 жыл бұрын
great work , please add more videos
@noiseoid3 жыл бұрын
Everything worked, thanks!
@mohamedaitmouali8953 жыл бұрын
thank you so mutch indien is the best of the best we are nothing without indien
@abdelrahmanswefy80782 жыл бұрын
Thanks for your effort I have a problem I tried to install machine library but I did not manage to so how can I fix it or any other solution
@electronicsshop11352 жыл бұрын
Thank you ,very helpful!, very good information.
@tonykempson43314 жыл бұрын
Thank you, this is very useful.
@Ralleigh3 жыл бұрын
Excellent video, thank you very much.
@kamalibrahim73222 жыл бұрын
Thank you for the informative video. Unfortunately, I get this error "invalid header: 0xffffffff" :( Any idea how to fix this??
@stuffy294 жыл бұрын
Nice listening to you teach. It's Firmware & not fimware. You've done a very good job & you speak so well. Keep it up. Are you in Chennai or elsewhere.
@vai.jagadeesan4 жыл бұрын
U r from?
@rajup.abraham92673 жыл бұрын
In Thonny 3.3.1 there is no Device Menu , then how to upload code to ESP32
@mehdikarimpoor94012 жыл бұрын
Hello Ahmed with respect I created a device control program for thonyide for esp32 devkit using station and access point modes. I send commands using the udp connection from the mobile application and I also control the devices every three seconds of the application using an api. I'm worried that after making it, when the device is used, there will be a problem in the program and it will not work properly. Is it possible to trust esp32 and micropython language and build a product with many customers?
@aas_shortforsmthin2 жыл бұрын
love your tutorial
@pierodeplano52034 жыл бұрын
Ottimo tutorial. Grazie mille... 😉👍
@that_one_who_knows2 жыл бұрын
sir, after doing that, will i be able to program the esp32 in c++ again?
@quintencabo2 жыл бұрын
Thanks Very helpful!
@cyrus_12kw4 жыл бұрын
Loved the Video and the explanation, very helpful
@mikepaine1628 Жыл бұрын
Where does the driver come for the esp32?
@signupisannoying4 жыл бұрын
Thank you very much, it works. So simple and so clear. I benefit from this.
@sebastianherreragil44913 жыл бұрын
Thank you very much!!!
@РЕЖУШТЕРНА3 жыл бұрын
This is cool!!
@your.free.electrons2 жыл бұрын
PLEASE also make a video on how to Remove the MicroPython and restore original firmware of the ESP-32 (so that it can be used with arduino IDE again).
@electronic79794 жыл бұрын
Very helpful
@sikandark78193 жыл бұрын
Excellent Vidoe. Can you please upload one tutorial for setting up the BLE over ESP-32 in Python?.
@jumbo9996143 жыл бұрын
Once you installed micropython on esp32, you no longer able to program in c/c++ using Arduino IDE right?
@imranaalam4 жыл бұрын
thanks. very helpful.saved hours.
@wilmacchrismo17594 жыл бұрын
Thank you for this video tutorial.
@doid1003 жыл бұрын
Amazing, thanks man!
@xilioxilione14784 жыл бұрын
Ottimo tutorial. 😊👌
@pareshmhatre40192 жыл бұрын
thanks for this information
@chandruarul79414 жыл бұрын
Very nice to understand sir... thank you very much
@DharmeshTechZone4 жыл бұрын
nice explanation thank you,it is very helpful
@jm10oct4 жыл бұрын
THANK YOU
@danieltrivino29353 жыл бұрын
Many thanks for the video, Do you happen to know how to install ESP NOW using MidroPython? Thanks in advance for your help Daniel
@bryanst.martin71344 жыл бұрын
Is MicroPython useful on ESP32 CAM? Plus, I understand that there is proprietary info that should not be disturbed, so erasing the Flash seems risky. Nice video!
@johndripper4 жыл бұрын
flashing micropython is same as uploading an Arduino sketch. If u upload Arduino sketch after flashing micropython then u will have to flash micropython again simple. :)
@kanui36184 жыл бұрын
Hi, I' wanna ask to you how to turn on Bluetooth serial in esp32 use micropython
@rverm10003 жыл бұрын
nice im going to try this
@DharmeshTechZone3 жыл бұрын
Sir can you webscrapping on esp32 thonny micropython
@shukhratdad98913 жыл бұрын
i ve got such command, what is it?-%Run -c $EDITOR_CONTENT import machine led = machine.Pin(2, machine.Pin.OUT) led.on led.off or while True: led_pin.high() time.sleep(1) led_pin.low() time.sleep(1) AttributeError: 'Pin' object has no attribute 'high'-how to solve?
@mamadoualimoudiallo45944 жыл бұрын
Hi everyone, thanks for the video. i got a question, is it possible to run an api on the ESP32??? just like django rest api for example!
@prabhacar4 жыл бұрын
welldone!
@abhisheksnair8254 жыл бұрын
Thank you ..
@dje53003 жыл бұрын
thanks
@TOMTOM-nh3nl Жыл бұрын
Thank YOu
@นูรคอยรีเจะเตะ-ฃ3ญ4 жыл бұрын
can you help me? I want code traffic light on esp 32 by thonny