Save money

I install d2 spring on this 2020 honda accord sport 2.0 I think it’s a 2inch drop hope you like it
Owner ...
‼️Front strut specs: top 44bs
Pinch bolt 61lbs
Suspension link 30lbs
‼️Rear top of strut 30lbs
Sway bar link 35lbs
Bottom of shock 58lbs
Big Screw hold spring bucket or arm 51lbs
Socket wrench set  www.harborfrei...
Spring compressors www.amazon.com...
Hex www.harborfrei...
www.homedepot....
Socket www.harborfrei...
Jack stands www.harborfrei...
Cordless ratchet RIDA 3/8'' Cordless Ratchet... www.amazon.com...
Floor jack www.harborfrei...

[@modakaification]

Ooh wee yesser the D2 springs install is straight forward. I've been riding D2's on my 10thgen accord for over two years with no issues whatsoever. Great video Jrod

[@JRod.Cuztom]

Thanks Richard thanks for the feed back

[@modakaification]

@@JRod.Cuztom anytime brotha love your contents man keep doing what you do I enjoy every video you upload.

[@JRod.Cuztom]

@@modakaification I going to start work on others car now thanks for the support

[@nelsoncolon3692]

I have a question for both of u I put my d2 and now when I turn I can hear the spring on the passenger side only and is killing me! Any idea y is doing that

[@captblade4512]

richard are u using camber kit as well?

[@monstermind4286]

Wow. What a blessing. Thank you bro. I feel confident now doing mine. I really appreciate you doing this video! Also it the tires dont rub the fenders at all after dropping it? I'd like to get the same springs.. I havent checked the description on that but thank you 🙏🏼 Much love from Southern Cali

[@JRod.Cuztom]

Thank you bro appreciate you and thanks for the support

[@monstermind4286]

@@JRod.Cuztom 🙏🏻🙏🏻🙏🏻🙏🏻

[@Mistadontplay89]

Looks really good man. I contemplated lowering mine but I think I'll pass on the idea. Really don't want to deal with scraping the front end when going up driveways, over speed bumps or entering shopping centers, etc. Also those dreaded times the wife has to drive it, she will most likely hit every pot hole and probably rip off the bumper🤦🏾‍♂️. I just want to add some hub centric spacers and that's about it.

[@JRod.Cuztom]

Sounds good man

[@adventsociety5382]

Get air suspension so you can adjust height on the fly

[@adventsociety5382]

@Imagine That ! my air ride system on my accord airs up in like 2.5 seconds so not sure where you got that info

[@lowkeyhim556]

Sound like a lame

[@lowkeyhim556]

Sound like a lame

[@suelolowpez4542]

Nice Accord ! I just bought D2 springs but I’ve been debating if I want to install them… buttt after watching your video I’m convinced! I love how it sits and doesn’t have any wheel gap. How does the car ride on those D2 Springs ?

[@johnathongilyard1354]

What’s up bro. Question when you lowered it all you did was the lowering springs right. Didn’t have to add control arms or anything right. I took mine to a shop and they said if I lowered it I would have to get control arms and some other mess.

[@elvin289]

broo! that’s my same question i see people adding control arms and camber stuff idk i want to install them but i don’t want to mess my car up if i don’t do it right!

[@elvin289]

but what from what i know and heard and what he did is just installing springs and that’s it

[@JRod.Cuztom]

I mine the camber arms are only to correct the camber on wheel the angle of the wheel going in to the rear quarter panel . You don’t have to add. Your tire are just going to waste unevenly. And waste on the inside faster .. depending on how low you go.

[@rickcarrasco6716]

So does the car ride good with the springs vs coil overs.

[@GINOTAMAYOMFX]

Nice what’s best springs or coilovers to avoid wear and tear ?

[@ponyland9999]

Eibach sportline

[@ponyland9999]

After one week of driving they settle and feel almost stock. 1.6 drop in the front and 1.8 drop in the rear. They almost fill the gap.

[@ponyland9999]

You'll be at a negative 2.6 camber in the rear front will be almost 0. The 2.6 isn't that noticeable but they also have adjustable camber kits if the 2.6 is too much camber for your liking.

[@Michavelli1]

Swift Spec-R are the best springs out there. They're stronger and lighter.

[@Bats10]

How much you charge to install?

[@Makingwaves_123]

ohhh I like this. I was debating to go full coilovers or start with springs for now.

[@JRod.Cuztom]

I would go Coilover only because you have the option on rise the car when ever you feel like

[@Makingwaves_123]

@@JRod.Cuztom ah thanks. I was debating between the two as a start but yea ur right 🤔

[@JRod.Cuztom]

Your going to end up getting coilovers. But if it’s not in the budget gets springs . I start with spring but in the long run you end up spending more money because you are going to want coilover after lol

[@Makingwaves_123]

@@JRod.Cuztom thanks for the tip! Will start looking around

[@orlandogutierrez6908]

how was the ride bro ? no clancks or clunks any kind of noise ?

[@JRod.Cuztom]

After the test drive everything was fine have any complaints from owner

[@orlandogutierrez6908]

i have bc coil overs exstream low , nothing but problems clanking , clunking garbage

[@jaxnitsua1200]

That is the cleanest Accord I've ever seen

[@rickcarrasco6716]

Question I see your tires are 235/35/19 ? I have the same accord but with 235/40/19s do you think my tires will rub with the D2 springs 2inch drop ?

[@JRod.Cuztom]

No because the wheels are 19x 8.5 wide and they are in

[@rickcarrasco6716]

@@JRod.Cuztom what about the 245/4019 tires

[@JRod.Cuztom]

@@rickcarrasco6716 yes you’ll be fine because the wheels are not wide.. you putting on stock wheels right

[@JRod.Cuztom]

@@rickcarrasco6716 www.tacomaworld.com/tirecalc?tires=235-40r19-245-40r19

[@rickcarrasco6716]

@@JRod.Cuztom they are aftermarket rims with 245/40/19

[@xdrxgos5227]

Hey bro did it make like a clunk sound ? When you put them on like when you turn the Steering wheel ??

[@JRod.Cuztom]

No it’s probably the end link in the you did tight right I would suggest using impact gun for that screw because it will turn All together

[@xdrxgos5227]

@@JRod.Cuztom thank bro ❤️ and love the the way how your car looks by they way your my inspiration man lol some day I’ll get there 2 😂

[@JRod.Cuztom]

@@xdrxgos5227 welcome nro

[@pansongrim2306]

about to order mine . have u had any problems or has it cause any damage in the underside?

[@JRod.Cuztom]

Not my car but if you careful you’ll be fine

[@ManuelCamarena0725]

Do you get a check engine light after or is it just when you swap out the coil overs completely I have a 2018 touring model and I’m wondering if I’ll get a check engine light

[@JRod.Cuztom]

On a touring model, it’s different if you put spring your ok but if you get Coilovers you have to get ads module

[@JRod.Cuztom]

Check out the lemon factory channel on KZbin

[@sergiovargas9986]

Making me wish I lived in Cali “J” it always seems Sunny.

[@JRod.Cuztom]

It’s getting hot already lol

[@gosborne3248]

Great work Fam lovin it 👍

[@brandons1067]

Ur car looks nice dude... What exhaust system u got? It sounds good

[@JRod.Cuztom]

It not my car bro I just installed springs click on title of video for the owner info

[@MR_TEK_YUH_GAL]

Hey bro I have a 2021 honda accord I put d2 lower springs but I hearing a noise when I turn the wheel u think is because I didn’t cut the piece of the boot off and it bounce a lot

[@JRod.Cuztom]

Na it has to be the endlink I always use impact go to tighten.. if you didn’t cut the rubber it just going to bounce more

[@stephennevarez1549]

I need help , I lowered my accord like you showed on the video. Once done the wheels In the back stayed cambered what do you suggest to fix ?

[@JRod.Cuztom]

That going to happen when you lower a car ., what springs did you use ?

[@JRod.Cuztom]

Camber arms

[@stephennevarez1549]

D2 springs

[@juniorreillo264]

Can u star on the rear putting the springs or is hard . Or is better the front them rear

[@JRod.Cuztom]

Don’t Matter where you start

[@rickcarrasco6716]

What is the name of that black thing on the real little window ?

[@JRod.Cuztom]

Louvers

[@bj10jgo]

whats the reason of cutting the bump stops? Isnt that for to prevent from springs rebounding too much or reaching full compression?

[@JRod.Cuztom]

It limits the shock travel

[@JRod.Cuztom]

With short springs you don’t have to. Google it

[@jorgeortega911]

So I have the same springs on my 21 accord 2.0t. Do you ever hear any clicking coming from the front and rear?

[@JRod.Cuztom]

It’s probably the end link From sway bar to strut

[@rico_visionsmorales6401]

Just installed them today and I’m hearing clicking sounds like passenger side I’ll wait for springs to settle to see if that fixes it if not I’ll have to take a look at them again

[@JRod.Cuztom]

@@rico_visionsmorales6401 check the sway bar endlink in rear and front

[@edgarnolasco8182]

Did you have to remove rear seats or touch them at all to install the back?

[@JRod.Cuztom]

No

[@MAC-qw9lx]

Hello, how much of a drop in the rear end expected when adding these coils?

[@JRod.Cuztom]

2 inchs

[@minfilipino]

Do you need a camber kit ?

[@JRod.Cuztom]

Not to lower

[@BigDaddyJGG]

How's the ride after 11 months. Nice stance. Looks sharp!

[@JRod.Cuztom]

It’s not my car . The own has told me any updates

[@imranfarooqi1770]

Is cutting the top hat of the rubber piece necessary?

[@JRod.Cuztom]

Yea if not hard and bouncy Ride

[@imranfarooqi1770]

@@JRod.Cuztom any other recommendations, going to install my springs soon

[@JRod.Cuztom]

@@imranfarooqi1770 no

[@Drewskiio]

Hey bro can you please help me ASAP and how do I find that pinch bolt online? I’ve found some that look like it but I need one and I’m sure you know what you are looking for

[@JRod.Cuztom]

The front one

[@Drewskiio]

@@JRod.Cuztom yeah on the front strut that connects the knuckle to the strut

[@JRod.Cuztom]

It’s this one www.hondapartsnow.com/genuine/honda~bolt~flange~12x64~90120-t2a-a00.html

[@JRod.Cuztom]

Go to dealership with part number

[@Drewskiio]

If you live in LA area dude do you think you can help my friend with putting on the front springs because we couldn’t do it.

[@xdrxgos5227]

Where can I get them springs ? Got a 10th gen to I would like to see mines sits on those springs🔥🔥🔥😎

[@JRod.Cuztom]

www.maperformance.com/products/d2-racing-lowering-springs-2018-2020-honda-accord-d-sp-hn-25-5?gclid=CjwKCAjwrfCRBhAXEiwAnkmKmWF9_RUkzSbommU5ACNvsoCYj4cCBD0r1oG1lQbm9R3lH71o5SyJlBoC3fsQAvD_BwE check different site for price

[@xdrxgos5227]

@@JRod.Cuztom thanks bro love you’re bids watch all of them since the first ☝️ with the modern steel metallic honda I love the color of the new one 🥵🔥🔥🔥

[@JRod.Cuztom]

@@xdrxgos5227 thanks bro appreciate the support. Car want low 2” drop all around

[@xdrxgos5227]

@@JRod.Cuztom ey bro if you don’t mind me asking where you get the modern steel metallic lip I been having problems wit that first one I oder wrong color 2 I oder to big it didn’t fit please help water to much money 😂

[@JRod.Cuztom]

@@xdrxgos5227 what year?

[@mcmurph101]

Nice looking 10th gen. Suweeeeet! Lol

[@louisverduzco3552]

I HAVE A 2022 HYBRID SPORT, WOULD THEY BE THE SAME SPRINGS?

[@JRod.Cuztom]

I would say yes but I never seen the suspension on a hybrid ask in a Honda forum like driveaccord.com or accordxclub.com

[@louisverduzco3552]

@@JRod.Cuztom Thx Bro! keep up the great videos helps so much!

[@JRod.Cuztom]

@@louisverduzco3552 thanks for the support

[@LburgVAGuy]

Looks sick! Hope they didn't settle very much after you lowered it

[@JRod.Cuztom]

Contact owner on ig his ig is on the description thanks

[@richardvigil3485]

Your going to but the rear camber kit on the back ?

[@JRod.Cuztom]

I don’t think so. this is not my car I just installed the springs owner info is in the description thanks for watching

[@juniorreillo264]

How lower is ur spring n why u need to cutt the robber

[@JRod.Cuztom]

Read all comments plz

[@Jinks96]

I got a question, does your front lowering spring make noise when you start cruising?

[@JRod.Cuztom]

It’s not my car but the owner never told of any problems

[@franciscoaragon9441]

Have you gotten any sort of mild popping or clunking sounds from the front springs when doing slow turns or just turning left or right out of driveways or corners? Mine do a little bit and dont know why, already checked everything and its tight and placed right. Might have an idea of why it makes those popping noises bro?

[@JRod.Cuztom]

I just did the install but the own haven’t told me if any clunking .. maybe you can try adjustable end links .. I head a lot of this problem with noises , I’ve done 10 installs and I never had any complaints coilovers and springs

[@franciscoaragon9441]

@@JRod.Cuztom oh ok bro for sures ima check out the adjustable end links and hopefully that should solve the problem, cuz i had H&R lowering springs before these and i had no issues or noises from those but these idk what happened. But ima give that a try, thanks for that bro 🙏🏼

[@JRod.Cuztom]

@@franciscoaragon9441 kzbin.info/www/bejne/gZ7YlWSNmceIr9U

[@franciscoaragon9441]

@@JRod.Cuztom nice bro thank you ima look for them and order them 👍

[@franciscoaragon9441]

@@JRod.Cuztom hey bro quick question since u already have experience lowering ur accord. Do i need a camber kit for mine after getting it on the 2inch drop front n back springs?

[@victormelendez4669]

If you want to save Money bring it to J he is a pro!! Nice job!! Looks perfect

[@JRod.Cuztom]

😂

[@jrjr8738]

Looks sick bro I’m having problems with mine and I only have 60k miles on it I change spark plugs coil packs but that didn’t fix the problem I’m looking at A Head gasket like everyone else

[@JRod.Cuztom]

Suck bro sorry to hear that

[@jrjr8738]

@@JRod.Cuztom Yeah it’s my fault though I should expected that from a turbo charged engine from what it looks like on KZbin lots of Honda Accord‘s are getting a blown head gasket‘s

[@pikicustoms4628]

1.5 or 2.0

[@juniorreillo264]

Why? Does it need to be cut 20mm the ring rubber wat is that for ..

[@JRod.Cuztom]

Because the shock is being compressor more because of smaller spring

[@JRod.Cuztom]

If you hit a bump on road it going to hit rubber and bounc up

[@JRod.Cuztom]

Bouncy ride

[@JRod.Cuztom]

Bouncy ride

[@baltazarbermudez4232]

Does the front springs makes noise when you turn?

[@JRod.Cuztom]

Not when I install it was fine

[@baltazarbermudez4232]

Is your car 1.5 or 2.0? I have the 2.0

[@baltazarbermudez4232]

I also put the front springs the other way around and still makes noise

[@hamie63_m]

Nice Now 1" spacers on the rear! Unless you got some wheels lined up already

[@JRod.Cuztom]

I think he has them

[@juniorreillo264]

Thanks brother . Just did my camber yesterday n that is a bitch .. finish them in 3 hrs damm .

[@markrustia6768]

What exhaust does he use?

[@JRod.Cuztom]

Not my car bro just did install

[@Nolimitj22]

Just installed mines a day ago and it doesnt look as low as i thought it would be😔

[@JRod.Cuztom]

Give it some time for the spring to settle

[@DenzelBoosted]

I want to buy them but im a bit afraid the drop is amazing and it’s only $170 compared to all the other ones only dropping 1.5-1.7 and costing over $230

[@pesochrisss]

did you end up buying them?

[@ItzViprr]

I’s it hard to chnage wheels when you have bags?

[@JRod.Cuztom]

With bags you just lift car up and charge tire easy

[@Champagneaustin]

Can you send me the link to a 2022 1.5 accord bro TIA!

[@JRod.Cuztom]

For what everything is the same brother 2018-2022 what In specific

[@Champagneaustin]

So the ones you have in you description boxs are the ones for the 22 as well? No issues?

[@JRod.Cuztom]

@@Champagneaustin yea they fit 2022 .. its not my car I just did the install

[@ramosgarcia3827]

❤❤❤❤

[@adamtx214]

I wish it was 350 for install for me I got quoted 800-1200 just for install😅

[@ponyland9999]

That's too much. The rear is simple takes less than an hour for both sides. And 45 minutes for each front. When I did eibach sportline springs I payed $300 for labor and $225 for the springs.

[@adamtx214]

@@ponyland9999 it is too much I told them I'm just asking for a regular lowering kit install not bags. Gives me more of a reason to do it myself though

[@ponyland9999]

@@adamtx214 I was just lazy to do it but its not hard at all. The rear is real quick and easy. I got it done for $300 and to me that was on the high side. Especially since I payed $800 to have an airlift management system and struts installed.

[@poticool]

i paid 230 $ CAD

[@blkcrappyescorts]

Ever heard of star pattern on the lugs 👎🏿

[@JRod.Cuztom]

😂😂😂😂 they where already tight Mr good wrench