How On Load Tap Changer Works

Want to continue learning about engineering with videos like this one? Then visit:
courses.savree...
Want to teach/instruct with the 3D models shown in this video? Then visit:
savree.com/en
******************************************************************
This video explains how an On Load Tap Changer (OLTC) works. On Load Tap Changers are used in liquid immersed electrical transformers in the power engineering industry. The purpose of the tap changer is to regulate the number of secondary windings within the circuit. By changing the amount of conductor (windings) within the changing magnetic field, the induced voltage output can be regulated.
Like this video? Then check out our other videos!
🚢 Marine Diesel Two Stroke Engine - How it Works! - • Marine Diesel Two Stro...
🚢 Ship Parts and Terminology Explained! - • Ship Parts and Termino...
⚙️How Deaerators Work! - • How Deaerators Work (E...
⚙️How Shell and Tube Heat Exchangers Work! - • How Shell and Tube Hea...
⚙️How Power Grids Work! - • The Electrical Grid an...
⚙️How Watertube Boilers Work! - • The Electrical Grid an...
⚙️How Dams Work (Hydro Dams)! - • How Dams Work (Hydro D...
💡Control Valve Types (Gate Valve, Globe Valve etc.)! - • How Shell and Tube Hea...
💡Transformer Parts and Functions! - • Transformer Parts and ...
💡Plate Heat Exchangers Explained! - • Video
📚Want to learn more about engineering?
Then join saVRee to access over 45 hours of engineering video courses! New courses every month!
courses.savree...
Hope to see you on a course soon! 👋
🏫Want to use the 3D model in this video to present, instruct, or teach? Simply join saVRee! We have over 400 engineering models that will make your life a lot easier!
savree.com/
📱Check out our socials!
linktr.ee/savree
📖You can learn more about engineering in our technical encyclopedia: savree.com/en/...
▶️Transformers with more windings on the secondary side compared to the primary side will increase the voltage output (step-up transformer), whilst the opposite occurs when there are less windings on the secondary side (step-down transformer).
There are two main designs of tap changer, resistive and reactive. The OLTC (sometimes called LTC) is designed to open and close the electrical circuit whilst the circuit is live. As the circuit is live during tap changer operation, resultant electrical arcs occur across the contacts. Tap changer maintenance intervals are usually dictated by the number of taps (number of open and close operations), or, by the period of time in operation e.g. 12 months.
Tap changers are usually placed in a separate tank to the main transformer, or, within their own compartment neighbouring or within the main transformer tank. The most common tap changer insulating medium is mineral oil.
The terms ‘turn ratio’ and ‘voltage ratio’ are mentioned during this video.
#saVRee #PowerEngineering #IndustrialEngineering

[@savree-3d]

Want to continue learning about engineering with videos like this one? Then visit: courses.savree.com/ Want to teach/instruct with the 3D models shown in this video? Then visit: savree.com/en

[@that90sguy77]

Thank you

[@georgehumphrey7178]

This is more "what a tap changer does", but well put together video 👍

[@bass_lander]

0.58 to 1.12 - the tap changer usually regulates the number of primary turns on the transformer to ensure a stable output on the secondary side. KB

[@lotsofcases6522]

Depends on the voltage and winding configuration because OLTCs are voltage limited.

[@wageryale]

Yes,usually it is at primary side.to ensure small current.

[@kanagarajg6822]

What if it is a step up transformer???

[@klam77]

Fascinating. Very well explained.

[@rtdlaboratories]

Nice explanation, I was kinda expecting to see how the actual switching operation works tho.

[@tiaansea3319]

Thank you!

[@wakelyy332]

Awesome explanation. We have just had a tap changer fail In a 375,000v generator transformer. Has done alot of damage.

[@kylelee787]

Thanks so much for great lesson

[@fosarvian]

great video. Watch at 1.5 playback speed.

[@andrewgrant1030]

The OLTC is normally on the primary (HV) winding becuase the current is lower.

[@eng.omareyadaljorani9954]

Excuse me Sir, can we install reverse type (w) instead of Coarse type (G) in power transformer? With my best regards

[@Foreveradeel]

Oltc centering to MDU plz

[@mousaalmanasif8872]

Nice video. The voltages on the secondary of Transformers are fixed to one voltage and not regulating. On The other hand the voltages on the primary is not fixed due to looses on a transmission line or there is a voltage drop or over voltage from the source or what ever reason so here the OLTC will cut or add primary windings to compensate for the voltage to be fixed on the secondary.

[@ohgoditsjames94]

I have never seen an OLTC on the secondary side over here in England, I guess this is a practice in the US?

[@alexstevensen4292]

It only has a few percent of range I suppose?

[@gopajirambhupal6506]

How to change tap position

[@mrmalone28]

You can manually change taps but only when the transformer is not under load.

[@fabulousmehandiandart6152]

👍👍👍