Tree Stumps Got me Feeling Risky | Sawmill Shed Build Ep.4

There's one thing I don't like doing besides running out of sludge, that is removing stumps. In a perfect world I would have an endless supply of tools in order to maintain my woodlot property. The reality is that sometimes I don't have the perfect tool for the job and so the perfect tool ends up being the one I have. A PTO-drive stump grinder would make quick work of my red pine stumps underneath my newly-built sawmill shed but unfortunately I don't own one. Thus, I"m using my poor chainsaw to dig out the stump as best I can in hopes of hauling it out of the ground with my mighty Wallenstein FX85 skidding winch. Although I'm a relatively optimistic person, this entire setup is not leaving me with much hope. Tune in today's episode to see how this ends up. Glad you're all here and here we go!
Tractor shown in this video: Kioti DK40se HST
Winch shown in this video: Wallenstein FX85
Sawmill shown in this video: Woodland Mills HM130max Woodlander
Chainsaw shown in this video: Husqvarna 435

[@rcote1234]

Next on your equipment list: Stump. Grinder from Woodland Mills. It’ll change your life. 😂. You sure get a lot accomplished, logging, milling, and constructing. You’re inspiring the rest of us to “get out there”. Thanks for the videos.

[@sawingwithsandy]

Just get some of that thick sludge in me and I move like the wind haha

[@TheMakersMarkTSF]

Left-handed and upside down; your ability to swing a hammer makes me jealous.

[@sawingwithsandy]

Just lots of practice I"ve had, that's all

[@xdude2x]

I bit the bullet and bought a stump grinder this spring. It was expensive but, worth every penny. Thanks for the video

[@sawingwithsandy]

I’m jealous….actually though

[@xdude2x]

@@sawingwithsandy too bad we aren’t neighbors, you could borrow it in exchange for your chipper lol

[@chuckmcgary4302]

You really should get a woodland mill stumpgrinder. It will be very handy especially after the thining project.

[@sawingwithsandy]

Seems like a good fit for sure

[@johnsobj]

Re: stump removal: cutting the roots a foot or two away from stump with reciprocating saw has worked well for me. Give it a shot and I’m happy to elaborate if you’d like. Thx again and keep it up. FYI: I get my sawmill end of March. 😁

[@sawingwithsandy]

Thanks for that John. You’ll be hooked on sawing from the first cut for sure

[@carlmclelland7624]

It's time to add a mini-excavator to your lineup of tools. Not only can you dig out those stumps, BUT, have a ball doing it! Operating my nephew's Kubota KX057-4 is even more fun than flying a helicopter.

[@sawingwithsandy]

I agree with ya there Carl. I’ve been thinking about them over the last while. Cost is the big hold up right now

[@09FLTRMM77]

MM77 Approved 👍🏼👍🏼………….let’s look into the future……….. I see a Woodland Mills tractor mounted STUMP GRINDER!!! YES!!! I know they make them, I’ve looked at them for my tractor ( I just don’t know if my tractor has enough OOMPH to run it) , and let’s face it you have TWO ( 2 ) Woodland Mills sawmills. It would only be natural. Your tractor DEFINITELY has enough OOMPH to run one! Hope to see it soon. LOL!

[@sawingwithsandy]

My fingers are crossed that I can pick one up before long. Sure would be useful around here. I probably have 200 stumps currently I would tackle with one

[@chrisarsenault120]

Nice hat! Great videos too!

[@sawingwithsandy]

Thanks Chris! I actually just washed it for once haha

[@79PoisonBreaker]

a tip to pull stumps is use a chain and wrap the end of the chain around the stump 2-3 times so when you pull it twists the stump. you can pull much larger stumps with same force this way.

[@sawingwithsandy]

I"ll have to give that a try. Thanks for that

[@morgansword]

Like yourself Sandy, I was taught about the value of money and whether or not to spend or to hold. A porkchop may seem in order but mush saved money and tomorrow ... last nights dinner is behind you and forgotten. The log extension is probably the very most important thing on your wishlist... please just go for it and either build or buy one as its going to give back in spades, you know this well. Backhoes, or other tractor tools will come should you find it necessary for them. I try to determine just which way the wind is coming from to determine just how the root system is on the trees and find their weakest side if trying to dig one side an pull one over. I can only guess but kind of think that the soil there lends well for excellent growth for the tree system meaning it is on all sides about the same. You know, blind squirrels even find some acorns so maybe you will enjoy some of that squirrels luck and get some to go over with the winch line and a couple blocks on other trees to give that additional strength to yard some of them out of the ground. I shall keep my smart ideas to myself as much as possible, I just wish I were there to help... dad said that two heads are better than one, even if one head is a cabbage head... not sure where that fits here but if you think of it, tell me your thought on it. I do really care about your success an only have kind thoughts of this grand endeavor!! Wishing you well, the days are already showing signs of getting shorter, so the midnight oil shall again, force us to dig out the synthetic underware... pure wool does make me itch like a fiberglass insulation will, when working under the house putting it under the floor.. and having to wear it the rest of the day.

[@sawingwithsandy]

Thanks for the support Morgan. Hope you’re doing well

[@toddforette3919]

Sandy thanks for all the information you provided I just put my hm122 together can wait to run it

[@sawingwithsandy]

That's great to hear Todd. Will be a great addition to your place I'm sure. Have fun!

[@kenbowers8423]

Good morning Sandy! I've dug, chopped, chain-sawed and hacked out many a stump over the years and I agree with you it's not fun. Unfortunately if you need a relatively flat and clear surface, staring at the problem won't get her done. Brute force and ignorance always seems to be the way. Love the extended shed and the mill fits in real nice. Cheers from Peterborough.

[@sawingwithsandy]

I hear ya there Ken. Sure are a job getting those suckers out

[@brianellis4964]

Put the cable around the root farthes away from the tractor, andpass the cable over the stump, actually pulling it sideways upward.

[@sawingwithsandy]

That could be the ticket right there

[@jameslarson6555]

I’ve pulled some pretty big stumps with a chain attached to my truck, a sharp spade and a recip saw with pruning blades. The pruning blades don’t dull up when you contact soil like chainsaw chains. Cut the obvious surface roots as far from the stump as you can, put some tension on the chain with the truck and you’ll see which root needs to be cut next. Stumps eventually pops out.

[@sawingwithsandy]

Those recip saws would wirk well I bet

[@melee7719]

i have seen folks use a 6-7' timber brace to change the angle of the cable to an almost vertical pull on the stump, as it pulls the timber lays down to 45 then 90 as it finishes, gives you a mechanical advantage that might be worth trying

[@sawingwithsandy]

May have to try that. Thanks for that

[@melee7719]

@@sawingwithsandy similar to this one, but have seen used with equipment instead of hand crank, its a "tee" timber kzbin.info/www/bejne/Z2fMfGaIbMiYlZI

[@dougstewart6288]

Sandy: use a steel drum on it's side next to the stump. Run your cable over the top and it creates a vertical uplift force. Works great with fence posts also.

[@forestMog]

A vertical pull ‘should’ be far better mechanical advantage for removing stumps than a horizontal pull particularly when placed under a major root. Even a small vertical movement ‘should’ loosen most roots. A pair of posts X’d together near the top and placed at 15 degrees off vertical ‘should’ be about right mechanically.

[@peewee.3138]

I was going to suggest the same thing but these guys beat me to it. Great minds think alike!

[@johnwoody4905]

stumps are a real pain oak and hardwoods are even worse than pine. woodland makes a stump grinder but it still takes time to grind them out. i watched video's on the hard wood it took a long time to grind one out. good video take care, be safe and well.

[@sawingwithsandy]

I can imagine the hardwoods are a huge pain if this pine is even a headache

[@pearsc5d]

I think you need another sawmill. Mach them up with that snow mobile collection you have .

[@sawingwithsandy]

Stay tuned haha

[@saintaugustine1715]

Sandy good afternoon there is no easy way for stump even with all kind and size equipment you hand up with extra work to do so I cut as low as I can even to ground level and let nature take over it take around 5 to 6 years for the size stump you got and it is just about all gone things are looking great you have a swell day now watch for not to over heat yourself has we get older the heat seam worse on us

[@sawingwithsandy]

Think that's the best way without having to spend too much money or effort. Luckily we don't have the heat wave that it sounds like others do. Fingers crossed

[@michaelhodges3841]

I have an idea, turn the saw carrage 180° on the tracks. It should work out for you.

[@tomsommer54]

Hi Sandy. If you ever want a chance to pull something that difficult, you need to put a snatch bock on the heavy item. Then put you cable through the block and the cable end back to your wench. Find a good spot on it. You will have double the pull power. It’s still wouldn’t help you on that stump though. It is always best to use a snatch block to avoid breaking your cable. It will happen on day. Good luck Sandy. Great content. By the way, your wench blade should have dug into the dirt to hold the tractor steady. Did you have the 3 point all the way down?

[@sawingwithsandy]

Hey Tom! Great tips. I didn’t quite have the blade angled correctly to dig into the soil o believe

[@jimputnam2044]

Get a bunch of stumps ready to go and rent a grinder for a day, some places have weekend rates . That way 2 days will remove a lot of stumps.

[@sawingwithsandy]

I’ve probably got 200 stumps id like to do and so may end up buying just because that number will keep growing

[@marvindiamonjr.9631]

Stumps! They're a pain no matter what tools you have.

[@sawingwithsandy]

I hear that

[@SuperHurdman]

You could consider burning the stumps out lots of video's on how to do it!

[@sawingwithsandy]

That would work as well. Just have to be careful with all the dry ground

[@runsolo7418]

My choice for removing stumps is a metal 5gal pail with the bottom cut out. Stuff the pail over the stump and start a fire. The pail acts as a chimney and keeps the heat in the stump, which dries out and burns quickly. Just an FYI if you mount (weld) a hitch tube between the front forks, you could easily drive forward with the trailer hitched in front of you. No more wondering what's the trailer doing.

[@sawingwithsandy]

Great idea about the hitch. I’m a bit hesitant to have fire in the red pine forest though as it’s quite dry but I’d just have to pick the right time

[@SeanSteggs]

Why don’t you put a small elevated deck down? Keeps your mill off the moist ground. Could mark where the leveling outriggers go and reenforce below for permanently solid feet instead of digging holes. This also allows you to blow down the area to keep the sawdust down. Hides the stumps to. You could also put some small bump stops down to the trailer wheels go into an easily know position. Luving the Vlogs Sean, Sydney-Australia.

[@sawingwithsandy]

May end up trying that out. Will see how it goes but this could work like you say

[@Z-Bart]

I should think Woodland Mills would work with you on a 'good' price for one of their stump grinders.

[@sawingwithsandy]

I sure wouldn’t mind but then again I’m happy to be a customer

[@gusswenson7811]

Good morning Sandy. Progress is looking great.. When I got my tractor I could have got a backhoe but said I will never use it.. Boy was I wrong 😢😢 Now I wish I had one for the times I need it.. Oh well.. Live and learn.. Keep up the great videos my friend… Stay safe and always be kind. Cheers

[@sawingwithsandy]

I hear ya Gus. I’m thinking I could sure use one as wel

[@scottjonker9921]

I know it would be a lot of work but you could turn the log bunks around so the stops were to your benefit and situation? Maybe do one at a time so measurements and squareness are not affected. Log clamps would have to be turned around also. Just a thought.

[@sawingwithsandy]

That would be a good option for sure.

[@dannyhackworth4158]

Hey Sandy I've watched most of your videos saw you install the lap siding attachment but haven't seen you cut some and install some lap siding I just purchased a lap siding attachment would like to see you install some thanks for the video and keep cutting logs

[@sawingwithsandy]

Thanks for watching that video Danny. I"ll keep in mind the lap siding for the future

[@jeffhuffman5433]

I really like the way you have your sawmill shed set up. I think to it will be better for the saw dust to go to the outside to be easier to clean up. And I recently been fighting with three big stumps Myself and it's not at all fun and have been thinking very serious about the Woodland Mills stump grinder. Great video Sandy

[@sawingwithsandy]

Thanks Jeff ! Think it will work out well. Time will tell

[@lpeterman]

Also, I would like to "second" the motion put forward by Dora T. -- with all that clean, open roof space; install 3 or 4 solar (pv) panels up there and run them through an inverter to a deep cell battery pack. That way you'll never be without a charged battery for your impact driver! I return now to 'lurk' mode...

[@sawingwithsandy]

Think that would be handy out here for sure. Thanks for that

[@allenandmain]

If we just find a good use for stumps we have it made, thanks for video,I’ll be looking for one with grinder

[@sawingwithsandy]

I hear that. I bet I"ve got 200 stumps waiting to be ground down if I ever get around to it

[@leslubiesdetienne]

The winch did make the stump move a tiny bit! I've been digging out stumps lately with the backhoe of my 25hp tractor and it's doing a decent job. It's annoying because you really need to go around it to get rid of all the roots. It rarely just pulls it out. A stump grinder is nice (I think, I've never tried one) as long as you don't intend to replant something in that spot. Love to see the progress on your project and your thoughts on workflow! Thanks and keep at it!

[@sawingwithsandy]

That backhoe would be a nice tool to have around for sure. Yeah those roots sure do hold tight. Glad you're liking the progress.

[@forestMog]

My dad used to hand grub big stumps in the 50’s, a very patient and determined man! I recently acquired a little Kubota B6000 with a 3 inch wide ditch digger. It cuts roots fairly well down to 2 feet. I have not tried it on removing stumps or trees yet. I am curious how close to the tree stump is close enough to make a difference and if three or four straight line passes around the stump would be enough. The other thing is steps in pulling down a tree. I expect leaving roots to the sides as a hinge would make the process much safer.

[@bryansaunter4124]

Have burned the stumps drilled holes in it, put used oil or diesel in, light on fire. It was on lake lot so stump campfires

[@sawingwithsandy]

That would work for sure

[@engineeringconsulting5534]

Sandy, Use your ATV and pull the trailer in, so the log stops will be on the side next to your lumber shed. You should have plenty of run to ride the ATV out between the shed and you log stand. Faithfully, James

[@sawingwithsandy]

I agree with ya there James. I think that will be the best setup for sure

[@ramoretrapper]

Good video to hopefully get WM to send you a stump grinder also!

[@sawingwithsandy]

Sure are nice units!

[@john_the_miller]

Sandy, you need to invest in some TimberLOK screws for securing your 4x / 6x lumber together. Those are the big screws the log home builders use to fasten logs together.

[@sawingwithsandy]

I agree with ya there. I’m not too familiar with them but think I’ll see about getting some

[@brianwestveer9532]

The way you have the mill setting makes since,you won't be walking around the mill to put lumber in the lumber shed,I would though put maybe crushed stone down first,so you wouldn't be walking in wet dirt.

[@sawingwithsandy]

I agree Brian. That's what I'm thinking

[@AndrewBrowner]

a cordless sawzall with a pruning blade works wonders on stumps, ive pulled ones out 6ft across with just the sawzall and my jeep equiped with a 10k winch, used a couple snatchblocks to increase the winches pull, and some 2" straps and 3/8" chain to anchor the blocks to the stump and the jeep to another tree, ive had the jeep floating in mid air with enough tension on the chains and straps you could walk on them across a 30ft span and they wouldnt move a millimeter i wonder what happens when your pto driven winch reaches its max pull, does it slip a clutch or will it pull until a shear pin lets go

[@sawingwithsandy]

I"ll have to see about getting one of those cordless recip saws. Certainly sounds like they are the ticket!

[@earthandbloom]

I seen your 130 on Kijiji this morning, they should advertise that sawing with sandy owned it 😉

[@sawingwithsandy]

Yeah a friend of mine is selling it for me. Think the time has come

[@earthandbloom]

@@sawingwithsandy I thought it looked like your saw shed. We are not to far from you. It won't take long to sell, fair price.

[@sawingwithsandy]

Thanks, friend of mine actually is handling everything over at his place so hopefully it goes well. I think he's got it priced fairly.

[@billhauck7872]

When cutting trees down leave 1.5 meters of tree in the ground for better leverage when pulling the stump.

[@sawingwithsandy]

My only trouble is I try to maximize limber from the log

[@forestMog]

I have cut some trees pretty high (20 feet up) to avoid the tops hitting buildings. A 30’ extension fire ladder secured to the tree plus a pull line 10’ above the cut made it easy and pretty safe to fell in the direction I wanted. To my surprise the black oaks coppiced beautifully so I didn’t fall the bottom part. But I still have that option.

[@roberto.peterson9917]

Suggestion might try wincing trees over and possibly get stumps out with trees or tree break?

[@sawingwithsandy]

I believe the trees will break off before the stump comes out

[@lpeterman]

Sandy! Why bother taking out the stumps? Cut them as low to the ground as possible, then position your new mill over those now ground-level stumps; the new mill should roll right over them when necessary. Do the same for the new log deck over the no-longer-in-the-way-stumps. I try and take all my Ponderosa pine stumps off at ground level so as to deny the Ips beetles enough material to start another generation and I find I can walk/work right over them with no tripping hazard/impediments. Just my dos centavos, from an Ex-pat Canuck now in the Willamette valley.

[@sawingwithsandy]

Good point. I find the stumps end up getting soil up their base a little bit as they grow and so it becomes a bit of a task to clear the dirt away before running the saw.

[@willbass2869]

I was kinda hoping to seeing a demonstration of mortise & tenon on those braces....😞. Save those stumps....you can make nitrocellulose ( boom-boom stuff)

[@sawingwithsandy]

Maybe next time around I’ll do a bit more detailed joinery

[@jakegrubb7630]

Backhoe for the back of your tractor

[@sawingwithsandy]

That would work!

[@bearrootshomestead7210]

I thought you would use dynamite or black powder for sure. I’m going to have to flip my mill around. Right now the saw dust goes into my loading area so I’m constantly shoveling it out of the way. Great vid as always.

[@sawingwithsandy]

That sure would’ve been faster

[@erwinaddison2030]

Nails and screws? Is that like wearing a belt and suspenders!😊

[@sawingwithsandy]

Sounds like they go together to me

[@terrymott9282]

Sandy I want to build a new sawmill SHACK for my hm126 I don't have my trailer yet how high do I need my SHACK so my mill will raise all the way when it's on the trailer.Love watching your videos always interesting keep up the good work.

[@sawingwithsandy]

I want to say atleast 7’ but I’ll try to measure next time I’m out at the mill. Hope the wait isn’t too long for ya

[@wallacefrey6247]

Check out some of the stump removal videos on You-Tube if you haven't already, maybe you can get some ideas there.

[@sawingwithsandy]

Think you're right there Wallace. Will have to check them out

[@tonygrimes13]

A Like & A Comment For The Algorithm.

[@kymillingandfirewoodservic2054]

Turn log bunks around to other side they are universal the can go either way

[@sawingwithsandy]

Only trouble would be that the blade would no longer push the wood against the log stops

[@kymillingandfirewoodservic2054]

Unless you moved it also

[@jeffpeters1014]

Weld/bolt log stops on the off side.

[@sawingwithsandy]

That would certainly solve things

[@flowerstone]

I use screws more than nails these days. I can go back and snug them up as wood shrinks. Also nice when I have to change something. Which happens a lot. 🙂

[@twestgard2]

I’ve used screws a lot in the last years but I’m going back to nails for a lot of things because screws snap whereas nails will bend or stretch more and sometimes that’s better. Depends on the project

[@sawingwithsandy]

I like that idea. Think I may have to look into structural screws and transition over to that.

[@willbass2869]

@@twestgard2 what brand of screws did you use? I've found the usual nails & screws from BigBox stores are just Chinesium crap. I've switched to using Maze brand. US made. A *LOT* less bending on nails. The Big Boxes sometimes carry limited amounts of Maze so you might have to go to an authentic hardware store/lumber store. Disclaimer: I'm not affiliated with Maze....just a very happy user

[@twestgard2]

@@willbass2869 I use all kinds. I have cases with hundreds of kinds of screw and nail. It really depends on the project. I will say that Spax and GRK are stronger but you pay for that quality and it’s not necessarily required in every situation

[@flowerstone]

@@sawingwithsandy That’s what I use. They are the Strong Tie brand. They can be bent 45 degrees and come back straight.

[@dylanhockaday9878]

Thay make a small stump grinder that goes on a chan saw

[@sawingwithsandy]

I may have to check that out. Thank you

[@TheFlatlander440]

When I'm out in the bush felling and bucking timber, I always have 2 or 3 extra sharpened chains for the chain saw. It takes less than 5 minutes to change them out when they become dull. Also, a snatch block may have helped with pulling that stump out along with some elbow grease using a spade (not a coal shovel like you were using) and a sharp ax. Good luck. Cheers!

[@sawingwithsandy]

Yeah those things would help for sure. I forgot my extra chains back at the ahop

[@jimputnam2044]

A double pulley hook up and you tripple your pulling power. In this suituition a chain to a tree at the front of the tractor would make a big difference.

[@TheFlatlander440]

@@jimputnam2044 I concur.

[@billhauck7872]

Calculate how much time you would use a stump grinder. It is always work out to be cheaper to rent one.

[@sawingwithsandy]

With all the trees I’ve got cut down think I may make it worth the purchase

[@benzie692]

I suspect they are in very different cost categories....but from the perspective of versatility, and long-term value; a backhoe attachment for your tractor would be way better than a stump grinder imo. Many guys I speak with who have tractors always say they couldn't justify the cost because they wouldn't use the backhoe enough. I can see how they would think that, as I once did myself. It seems logical, but what I have come to realize with two tractor purchases now is that when you have a backhoe at your finger tips, you suddenly find all kinds of uses for it and one of the biggest and most common ones is removing stumps. The biggest limitation is the ability to swing the bucket when digging holes etc. I like the backhoe so much that when I renew my tractor in the future I may invest in a mini-excavator instead of the one for the tractor. Anyway - food for thought on your tool/toy wish list!

[@sawingwithsandy]

I have seriously considered a back hoe before for the tractor and just like the points you mentioned I figured stump removal would be a big use for one. I do like however mini excavators for their ability to move easily over rough terrain and the versatility of them. Only trouble is they are very expensive as I"m sure you are aware

[@benzie692]

yes sir...mini excavator would definitely be far superior.....360 rotation for digging/dumping would be a game changer and the push blade would be awesome too!

[@Grizz270]

Sandy when rolling the logs on ...to prevent them from rolling to far can you rig up the log clamps in a upright position to prevent the logs from rolling to far?

[@sawingwithsandy]

That's a great idea. Simple but it would certainly work I"d imagine.

[@yunussuleman9690]

Hy Sandy are to not going to make a dack to walk ? or you have plane to take out show mill time to time in a wood ?

[@sawingwithsandy]

I think I may just use the dirt floor for now to see how it goes

[@funnywolffarm]

Can you bolt/weld another ball hitch receiver to the other side?

[@sawingwithsandy]

That’s a great idea. I don’t see why not

[@dalekentjr.2431]

just wondering cant you just turn the log bunks around so the stops are on the other side

[@sawingwithsandy]

I can the only problem is the blade will then not be pushing against the log stops

[@MrBrewner]

Are you going to be able to get your tractor under your addition to get your lumber out of the lumber shed? Looks to low on camera.

[@sawingwithsandy]

The main beam is tall enough by about 1.5’. The side braces are right close though

[@melee7719]

can the dogs and stops be reinstalled to face the opposite direction? I was hoping so, don't have a mill yet but wanted a setup where the logs were loaded on the same side the sawdust gets kicked to, in all videos i never have seen a Woodland Mills configured the opposite way, would like to know if doable...thanks

[@sawingwithsandy]

The log bunks can be turned the other way just the challenge with that is the saw blade direction will then not be pushing against the log stops. I still think it would be ok though in most cases. Other issue would be the guard would not be able to prevent the blade from hitting the log stops if they were left up by mistake

[@nahikuscott]

Sandy, do you know about 6" GRK screws. They work well for securing angle bracing.

[@sawingwithsandy]

Hi Scott, thanks for passing that along. I’ve seen them before but haven’t tried them. I’ll look into them for sure

[@twestgard2]

GRK has screws in many sizes and the lag screws are a lot easier than the usual hex head kind. Unfortunately they will break the bank so you can’t use them everywhere

[@hardracer]

It really seems like your chain is not sharp...I've noticed in the last couple vids

[@sawingwithsandy]

It was sharp for a few minutes but then the residual dirt on the side of the stump knocked it down

[@pearsc5d]

Oh I'm sure you will be adding a stump grinder to that list .

[@sawingwithsandy]

I think so. I've been wanting one for years and think it's about time

[@lonewolfFirearms]

I just received my woodland mills stump grinder and that thing is amazing. I took out 4 rather large stumps in my yard with it so far and it only took me about an hour to get rid of all 4 of them. I have about another 25 to do.

[@sawingwithsandy]

Now you're almost convincing me haha

[@adriandavid970]

Hi everyone, just a question from an unexperienced here: that construction adhesive is stronger/ better than regular wood glue? As far as I know (again, close to 0 experience) if you glue 2 pieces of wood with wood glue, that bond is stronger than the wood itself...Thanks for whoever will reply to me :)

[@Andrew_From_NB]

Great job Sandy! Love the result of the build! To bad the olde DK didn’t get that olde stump pulled out for ya but either way glad you were able to get it trimmed off with the saw! Enjoyed dropping by as always to see you! Cheers! Andrew from NB :)

[@justdora440]

You're great at sawing with a chain saw, but ever thought of looking into getting a solar powered charging station ? Prime has the ones by Ecoflow on sale right now. They're: portable, good for power outages, charging things like cell phones & screwdrivers & circular saws (screws vs nails). Your new saw port (kinda like a carport) is looking good ! Darn stumps !!!! 😄

[@sawingwithsandy]

I haven’t looked too much into it but now you got me thinking

[@justdora440]

The possibilities are endless !!!

[@terrymacleod6882]

that stump cutting also stretches the chain. i did about 6 stumps before i couldn't tighten the chain anymore

[@sawingwithsandy]

Good to know. I did notice my chain getting loose and now that you mention it can understand why. Thanks for sharing that

[@scotterickson7296]

Hi Sandy, I got out to the saw mill and got some pictures of the bucket and saw dust deflector I'm running. do you have an email address that I can send the pictures to?

[@sawingwithsandy]

Sure Scott. [e-mail]

[@buddyreed2623]

Hi Sandy. Do they make an excavator bucket attachment for your tractor? As you said earlier in the video, you have a lot of stumps. Have good days!

[@sawingwithsandy]

They do make back hoes for my tractor. That would be a big help in this case for sure. Just costly for a back hoe attachment

[@barrystrachan6340]

Next time try using a farm all jack (if you have one). Once you have a couple of the bigger tap roots cut the jack should be able to pull it right out.

[@sawingwithsandy]

Thanks for sharing that Barry

[@roberto.peterson9917]

Does that location get enough sun to charge a small solar generator for like charging batteries fir cordless and possibly some solar work lights for cloudy days

[@sawingwithsandy]

I think it would work now. May have to do just that. Thanks Robert

[@andrewgalbraith2372]

I'm betting they might rent stump-grinders near by my friend :)

[@sawingwithsandy]

I just have to spray down WD 40 to break the rust that’s formed on my wallet haha

[@brianellis4964]

Man! You're a good whammer with that hammer!

[@sawingwithsandy]

Thanks Brian. Had a bit of practice over the years behind the scenes

[@jimmaskell7537]

Any day in the bush is a good day. Be careful and be safe 👊

[@sawingwithsandy]

Absolutely!

[@davidhattenburg2609]

Use an old tire, it lifts up, much safer

[@sawingwithsandy]

I'm going to have to try this. Sounds like a good idea

[@RavensRidgeNC]

It took me all of one day clearing for a driveway on 7 acres of untouched land to pull the trigger on the WG24 - just no way to work around all the stumps, large, and small - I consider it an investment in my quality of life. ;-) Thanks for the vids!

[@sawingwithsandy]

I'm pretty much at that point as well. Just a task that needs some heavy machinery

[@edwardheid3392]

Go and rent a stump grinder

[@sawingwithsandy]

Pricy units worth it for ahrw

[@andyperrine9987]

Awesome vid as always my man.

[@sawingwithsandy]

Thanks Andy!

[@engineeringconsulting5534]

OK. You already thought of pulling it in. Keep the episodes coming. Faithfully, James

[@sawingwithsandy]

Thanks James! Hope all is well with you

[@chrisstone6548]

I have a woodland mills stump grinder and used it last weekend for the first time.It worked well. It's not fast but does a great job. I am trying to get a 130 max set up, that I've had since last October and stumps were my menace. Land is now clear. Can't wait to get milling. Thanks for the great content. It has helped me on my journey to start milling.

[@sawingwithsandy]

Now I’m just about sold on the stump grinder!

[@critical-thought]

Yeah, pulling a short stump like that isn’t going to happen. Even with 5 feet of stem, the winch likely won’t pull it. The woodland Mills stump grinder is on my to-get list.

[@sawingwithsandy]

I hear ya there. After putting a little tension on the cable it was quickly apparent that only the tractor was going to move.

[@exotictones1054]

Another use for the excavator. Or two,loading logs so you don't need a log deck n digging out stumps.that's why I leave stumps 3' high.I'll be shocked if that winch can pull that out.

[@sawingwithsandy]

I sure would like one. The price tag is scaring me

[@exotictones1054]

@Sawing with Sandy I got mine for 30.used of course but I've seen other brands cheaper for sure.

[@woodintheblood4104]

If I'm not mistaken I think pine trees have a tap root that goes straight down and is it's main root.

[@sawingwithsandy]

I think you're right actually

[@davidduvall4655]

Unfortunately in my life I've dug out way too many stumps. Best way I've found is a reciprocating saw with Ling blade . I dig around outside and cut roots out then find the least roots side and dig down and reach under and cut roots. A lot of work but it gets it done. Largest I've done is a 38 inch maple. Had to use a truck to drag it out of the hole. Recip blades are fairly cheap and the lasted a long time. Good luck and I hope you get your stump grinder.

[@sawingwithsandy]

I like that idea. I just have to find an electric recip saw as that would work real well.

[@forestMog]

Milwaukee makes a 12” blade just for that purpose.

[@lloydconner3034]

Use your grapple to load logs much easier.

[@sawingwithsandy]

Definitely would be

[@danpar1184]

Great job backing the mill into place.

[@sawingwithsandy]

Thanks Danny