SC2 Pattern Cut Demonstration

[@kennethodonnell2068]

90! I cut on my sc2 at 25. I let the blade do the work which requires more adjustment to blade depth. But in my opinion, lower down force means less stress on the bearings, motor, and friction points. Good blades are seriously sharp. I cut glitter HTV which is the thickest material I have ever seen for this type of cutter.

[@laughingthrushmusic5269]

I'm about to get one for my screen printing shop. Is the SC2 enough, power wise or would it be worthwhile to get the Titan1 for more power?

[@snagod2nasty741]

Hey Ralph, can I put my pinch rollers anywhere along the ruff line on the plotter or only in the small sections that has the white markings above them

[@FlexFilmPlus]

Only two should make contact with film. One on each edge.

[@ThatFlyGuy98]

Can you make a video of you cutting a pattern and installing it on a fake door to show the accuracy of the machine and software?

[@omarmendez6844]

I bought the plotter, it works perfect and the patterns are very accurate

[@wrxjay309]

@@omarmendez6844 that’s awesome to hear which one did you go with?

[@omarmendez6844]

@@wrxjay309 I got the 53" SC2 cutter, So I can cut the rear windows and Windshield. Im already making money.

[@shaneshifflett7184]

@@omarmendez6844 hey omar I have the same plotter as you do but the software windows are not the same as the cars I am trying to do

[@omarmendez6844]

@@shaneshifflett7184 are you using the software From Film&vinyl Designs?

[@MiguelMartinez-mb3gz]

What sophware is that? I used it when I worked at a tint shop and the patterns are perfect but I'm buying a 53' sc2 just like that and only want to use that sophware because im familiar with it, so if anyone can let me know what it is

[@FlexFilmPlus]

It is our software. Flexcut 4.0

[@FlexFilmPlus]

Www.flexfilmplus.com

[@omarmendez6844]

Miguel Martinez me recomendarias esta plotter y el material. quisiera comprar ambos pero nunca he usado este material. es bueno?

[@AngelGomez-ot8oy]

@@FlexFilmPlus can you use this plotter with madico program

[@nigelkimble9207]

What's a good tint software to use with this plotter? Tint Tek doesn't have the plotter listed

[@Raul-uh8rx]

What size is the roll tint ?

[@RVingTheCountry]

It looks like a 24 inch roll.

[@KtuluLeaderRise]

Can you make a video making die cut stickers with this cutter please

[@ryankelly9931]

Why does my film walk when I do long cuts? I can cut single widows but any time I try and stack it walks the film to the left (when facing it) of the plotter. Please help

[@EJ3.16]

Excellent tutorial thank you,...

[@Lexaniortiz1986]

what happens if you cut on the release liner

[@oscarmoran4751]

Hi Ralph I have a problem with the software

[@thetintwizardsllc3128]

what size of blade are you using?

[@2004chelo]

I would suggest to get a 30 angle blade.

[@MrAiric81]

I am also wondering if he used the 45 or 60 blade in the kit. I have 30 on the way but wanted to give it a shot now

[@RubenTntz_]

@@MrAiric81 where did you buy the 30 degree angle blade ?

[@screenprintingnewyork9718]

This machine works whit MAC/sistem?

[@2004chelo]

Could you recommend me the best angle blade for this plotter... I'm having trouble get it to the right position.

[@2004chelo]

I would recommend a 30 angle blade, for me is the best blade so far.

[@alexphoenix6041]

i know I am quite randomly asking but does anybody know a good website to stream new series online ?

[@cairolandyn1611]

@Alex Phoenix Flixportal :D

[@alexphoenix6041]

@Cairo Landyn thanks, I went there and it seems like they got a lot of movies there :D Appreciate it!!

[@cairolandyn1611]

@Alex Phoenix no problem =)

[@jamirrabryant3695]

Best vinyl paper for tshirts

[@TheseBygones]

my needle isnt hitting the film help?

[@staffinggroup1448]

That machine should have been named MOZART