People have been asking for this for a while. Sorry about the sound. Visit VOLTPPE.CO.UK Use Discount Code SHARK at the checkout for 10% off EVERYTHING!!!
Пікірлер: 65
@gregbouchard41420 күн бұрын
U do a rally good job on here and am a big supporter of u do a rally good job on here and u do a rally good job on are own u do there job done on are own
@ryno85472 ай бұрын
@shark scaffold I have so much respect for you scaffolders now I put my first one up for my self same size as video I am fairly strong but it was hard work you make it look easy
@alexcarter59446 ай бұрын
That’s how I used to do it as well. Nice vid
@garymugford32732 ай бұрын
No baseplates? No problem 😂
@fr1endsies2 ай бұрын
Jobs a full board out on the 10th lift? No problem! Just jump on it until it fits
@user-hi4wf6mh1o6 ай бұрын
Your some grafter mate not many of yous left. 👍
@SharkScaffold6 ай бұрын
👍🏻
@ianwaller50366 ай бұрын
nice demo youre doin a great👍👍
@fatscaff36706 ай бұрын
If I’m on my own I’ll put me sprags straight on swivels so me taker is straight in
@whostroubled6 ай бұрын
Been waiting on this one ! My guy 💪🏼. PLEASE BUY A NEW TAPE😂😂😂😂😂
@lloydwright36616 ай бұрын
I was taught a completely diffent way to base out, maybe your way is easier when youre on your own but it seems to add steps and cause issues we dont come across...
@user-bd6nm7du2j6 ай бұрын
As some one who did 10 years on the spanners from age 25-35 ....now 59 , i love watching you work ! Just one question though please.....why no base/sole plates ? keep up the great work and be safe up there. Ps , if i lived closer , i would offer my services as a yard boy. Ps , i just googled your level ......how much !?!?!😲
@turf-13046 ай бұрын
Quality mate nice one for sharing this
@mattdrake20656 ай бұрын
Nice one Sharky. I’d do it exactly the same.
@chrisdonner29106 ай бұрын
Thank you for sharing!
@FromScratch2thetop3 ай бұрын
Can you just use 10ft standards bolted together to make them 20ft as my van is not big enough for 20ft poles
@WorldCommander5 ай бұрын
I have frame and brace scaffolding but need to cantilever out 48". Can you combine components of the tube and clamp with the S-style frames to do it?
@cliffordphillips83902 ай бұрын
Heres my two cents. measure the bottom, then rather than measuring yer pinch rod and sticking it in at waist height, stick it in at ledger level (either as an aberdeen or transom) and then level your standard (from the point your measured out at the bottom). Diagnal and upright temps in then bosh... faster and yer bend doesn't twist up everywhere when ya start tying things off not straight
@StevenDarvill-nv4ezАй бұрын
Base plates ??
@threatassessment2166 ай бұрын
Thank you sir ❤️
@dhewitt25145 ай бұрын
I know nothing about scaffolding and this was really interesting. Quick question- what height should you tie it into the building?
@shiroism80392 ай бұрын
Once every 4M ( Vertically) is AUS/NZ standard not sure about UK
@ivankainz83476 ай бұрын
Keep it up son More chimney work felgemacher Masonry and chimney
@PresidentSquigglyMiggly2 ай бұрын
Is there a handy way to start a bay on your own without something to lean it up against?
@StevenDarvill-nv4ez27 күн бұрын
@@PresidentSquigglyMiggly kicker lift
@Manifest_station3695 ай бұрын
I gave up scaffolding 1 year ago. Yourcmaking me wana hump back on the spanner 😂.
@Lucidchronicles3 ай бұрын
What would you do if it was for a rendering job and need a gap between the wall and scaffold?
@SharkScaffold3 ай бұрын
No inside board. And nothing touching the wall
@user-xm5lf4dv5s6 ай бұрын
You never put any tie tubes in on doubles .. ever ? Litterslly jus a few braces holding it all together ?
@myrocrad72296 ай бұрын
Would be careful uploading videos of yourself without harness and helmet. Other than that. 👍🏻
@kf9926Ай бұрын
He’s the cameraman
@strictlybangers6 ай бұрын
i see a lot of scaffolders using fittings/pins that are very rusty. what do you use to keep it from rusting together and seizing up?
@SharkScaffold6 ай бұрын
Your meant to use some kind of lubricant, but constant use keeps them from seizing 👍🏻
@strictlybangers6 ай бұрын
Great, thank you @@SharkScaffold
@jofasable6 ай бұрын
From Donegal , Ireland 😎👍
@WilliamBone-f3rАй бұрын
Why do you not have a safety hat on at all times a done scaffolding for 13 years and couldn't be on site without one love watching your videos right enough but safety first bud
@ryno85473 ай бұрын
@shark scaffold what should measurements between ledgers be
@SharkScaffold3 ай бұрын
Depends how many boards wide. 3 boards wide (24 inchs inside to centre). 4 boards wide (33 inchs inside to centre). With those measurements the toeboard would sit on top of the boards.
@SharkScaffold3 ай бұрын
5 boards wide (42 inches inside to centre) if you want toeboards to sit on the transoms just add 1.5 inches to those measurements.
@ryno85473 ай бұрын
@@SharkScaffold I mean upwards like first one how height off floor and then measurement to next one
@SharkScaffold3 ай бұрын
@ryno8547 it can be what ever you want. Normally it’s 2m
@ryno85473 ай бұрын
@@SharkScaffold thank you
@GK-fq3cy6 ай бұрын
Whats the typical height between lifts
@SharkScaffold6 ай бұрын
About 6ft (1.8m)
@GK-fq3cy6 ай бұрын
@@SharkScaffold so that's ok for say plasters working, etc
@ashleyt45656 ай бұрын
@GK-fq3cy 2M is standard lift height
@alexsinclair85656 ай бұрын
You should use dog bones easier on ya own
@cvids9996 ай бұрын
Less measuring less fittings win win and easier too base out he could do so well with bones and a labourer
@Love-ty8wn6 ай бұрын
Can you make a video about RUX scaffolding?
@SharkScaffold6 ай бұрын
What’s that?
@Love-ty8wn6 ай бұрын
@@SharkScaffold i work in Poland and our firm uses scafom-rux type of scaffolding
@minderkid2016 ай бұрын
@@Love-ty8wn well we ain't in Poland are we!!!! Some one from the E.U gonna have to show you son!
@LiClan6 ай бұрын
@@minderkid201Poland runs the U.K.
@minderkid2016 ай бұрын
@@LiClan nah the Romanians run the construction game now after we fucked off from the e.u to get away from you guys!!!!!!
@rob204526 ай бұрын
Those fittings will snap soon if not oiled,.
@jamesleeeuwendaal59916 ай бұрын
👋👋👌👌👌👌
@NorthEastMick6 ай бұрын
Is that in Lesbury mate?
@SharkScaffold6 ай бұрын
No it was miles away, in a place called Fontburn👍🏻
@NorthEastMick6 ай бұрын
@@SharkScaffold I’m sure I’ve been there when I was a kid fishing. If I’m not mistaken there’s a reservoir there that you can catch trout in. Good video as always mate and get your fittings sorted, they look like you’ve picked them off the bottom of the Tyne lol