Scalding HOT EVIL Filter of DEATH! SEVERE Smoking! Jeep 4.0 Cherokee / Wrangler

Cut Condenser Video: Customer States...WAIT, look at this! Can't make this stuff up! • Customer States...WAIT...
Visit my Second Channel on KZbin, RainmanRay Off Duty / rainmanrayoutoftheshop
Follow on Twitter: @RainmanRay4Real
TikTok: www.tiktok.com/@rainman_rays_repairs
Check out my Merchandise (because I don't say MERCH) for Men's and Women's Apparel, MUGS and Stickers! rainmanraysrep...
Support the channel on Patreon: / rainmanraysrepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage for now
Amazon List, must have for any toolbox!
1: Astro Tools 52SL 500x2 Lumen Wirelessly Rechargeable Folding Double-Sided LED Slim Light, & 52SLC 500x2 Lumen Folding Double-Sided LED Slim Light W/Wireless Charging Pad amzn.to/3Jd2h6t
2: Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
3: NOCO E404 12.25 Oz Battery Terminal Cleaner Spray and Corrosion Cleaner with Acid Detector amzn.to/3ILbdjv
My Camera Gear:
Gopro Hero 10 amzn.to/3AaxELe
Hero 9&10 Dual Battery Charger MUST HAVE! amzn.to/3g5KdAT
Flexible Camera Mount amzn.to/3Jywrk5
#brakecleanmafia #wifeunit #rainman #comnissionearned #mechanic #technician #dealer #independent #autorepair
As an Amazon Associate I earn from qualifying purchases.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
”Intro Music by Karl Casey @ White Bat Audio”
Thanks to Jesse for making the intro and graphic for us to enjoy!!!
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”
Customer Customer States Mechanic Fails Engine Transmission Gas Diesel off road race 4x4 street car daily driver scam dealership dealer technician how to

[@nbrowser]

This channel has only gotten so much better since Ray opened his own shop, seriously man you're so much more fun to watch lately and I find it refreshing.

[@Treeves30]

I couldn't quite put my finger on why Ray's channel has seem to be more improved..........but you said it perfectly! He has something called "Freedom" to do what he wants and be who he is now with his own shop!

[@rickm1255]

Ray doing what I get called out for all of the time while training new techs. "Ok, raise the truck and get a sample. Move, let me push the button, give me that wrench, give me that cup, etc. Why are you just standing there"? 😂 Thanks for putting up with us, young fellas.

[@mred8002]

That’s what I pointed out in a previous post, when he started teaching Wife Unit, that he didn’t try to micromanage her,yet gave her enough information to make decisions. Sign of a good teacher!

[@Taylormade2350]

You sound like a douchebag

[@taborgreat]

after enough time, you find that you live both sides. having someone to boss you around and steal all your earnings is nice in a way.

[@takedeadaim8671]

One box of stainless wire brushes from McMaster is about what one can of brake cleaner and will remove more sludge faster than half dozen cans of aerosol poison. Just saying.

[@mikenyc1589]

Congrats to Troy for keeping shop clean and organized...looking good!!

[@46bovine]

Troy needs to visit my garage and do the same. So sayith Bob the Slob. I can’t keep the durn place neat.

[@mikenyc1589]

@@46bovine LOL...probably most shops are messy

[@gaiustacitus4242]

@@46bovine My shop used to generate 12 x 55 gallon barrels of metal shavings a day. Part of the job was for every machinist or machine operator to clean the machine tools, all work surfaces, and the floor during the last 30 minutes at the end of every shift. If you let a mess get ahead of you, then it becomes a really big job.

[@rick980]

@@mikenyc1589 garage I go to nowadays he paints every few years, in there almost every Saturday cleaning the floors. Tools are all hanging up and each one has its place. Puts then back after reading each job as does his son.. The more I think about it if you are happy working in a mess good for you. I just think that as a customer you want to think the job was done complete and not half assed. If you don't have time to put tools away then can you get the job done right

[@bob.bobbington]

Troy is looking like a brilliant addition to Rey's skills. He's a lucky kid and will learn a crap ton of stuff from Rey, who seams a great teacher and they both seem really chill to work alongside.

[@george8873]

Was honestly surprised how much cleaner the valves and stuff looked the final time you took the valve cover off after running the cleaner through the engine. Seems to have cleared up the smoking problem. Also, seems like Troy genuinely enjoys learning. I can see why you hired him. Plus his personality meshes with yours perfectly, lol.

[@forgetfulme1719]

the cold start burned off lots of oil that dripped into cylinders from worn valve .stems seals, he needs to restart jeep tomorrow cold to see smoke issue was cured by BG

[@capnpugwash5403]

Got to admit, pleasantly surprised by the result. Pity you didn't do a compression test prior and post treatment. also an opinion of the power pre and post.

[@kevinhill5596]

Great idea! 👍

[@UseAndGo]

Im totally blasted by this super stuff effects.. since I was sure that this shit doesnt work... so next in line.. get the same stuff and do it on my jeep =P... can we get product links =P

[@UseAndGo]

@@worldsend69 busy ppls .. come here to north Finland and try that again... I bet some sort aneurysm while trying it

[@levisvarela3735]

take for a spin, if it run good, there you go, but on a engine that old, i would go 10w40, my 318 seen to like it more than the 10w30

[@capnpugwash5403]

@@IR-nq4qv the second option is seat of the pants, and really just guesswork, the first option would be factual observation. Nothing self contradictory about it.

[@wolfgangweber9924]

My day begins with watching a Rainman Ray's Repair video. This habit is starting to pay off. Yesterday I did an oil change in the driveway and it was the cleanest ever: no oil dry required. This video was an oil change to the n-th degree!

[@briandasno1714]

I'm a home repair specialist and I still start my day everyday with watching Ray. That was not meant to rhyme it just happened

[@wolfgangweber9924]

@@briandasno1714 "It might work-it might not. But it's definitely worth a shot." -- accidental poem by Rainman Ray

[@mmes307ify]

Did you say click a few times lol

[@JoshuaJonah]

@@mmes307ify That's an old one, even for us millenials, AvE was the steward of that term.

[@marcmendes6961]

Loved seeing Troy throw his official shirt on once he knew the camera was coming for him... and Ray, you showed much restraint in not mentioning the garden hose hack until the end 🤣

[@KekeeBlack]

I liked the garden hose 😂 reminds me of stuff Pole Barn Garage would do

[@marcmendes6961]

@Keelin Blackburn I appreciated the ingenuity of it... you gotta do whatcha gotta do. At the same time, it stuck out like a sore thumb and would have been an easy target for Ray to make a "Jeep thang" comment. 🤣

[@ThomasLeonardSr]

I've got to comment on your ability to make me and obviously 10's of thousands of others tune in daily to the Ray hands-on mechanic show. You are a natural born walking, talking, and working showman, utterly amazing. You are blessed and a blessing, as it should be.

[@JoshuaJonah]

I think you mean "one-hand mechanic"

[@superb60ce]

Great video of the process. But the gasket you used (Fel-Pro VS 50458) is for the 96 and later with a steel valve cover. The part number for the aluminum valve cover is VS 50522...I learned that the hard way.

[@tiredoldmechanic1791]

Back in my dirt track racing days, we used to pull engines out of junk cars that were dirtier than that. We ran straight 40 Valvoline racing oil in them and after a few races, they were clean inside. We ran it because the Super America stations would have a sale on it in the spring. We bought cases of 24 cans for $7 a case in the 70s. The 40 weight kept the oil pressure up and the engines didn't smoke as much. In Florida, you could run 40 or even 50 weight oil. No need for multi-grade oils if it doesn't get cold.

[@babaganoosh555]

Love that BG process! Always impresses customers when you can show them before and after pictures of the valvetrain and the bottom end (if the sump is easy to remove) and when it saves them an engine rebuild it's even better!

[@nicholassammauro4941]

The Top 2 Engine Restorations on the planet, BG EPR and BG Dynamic Engine Restoration….Excellent demonstration Ray and Troy

[@jeremybearce8233]

Just as a tip, the shop I work at uses old electric floor cleaning pads in the oil drains to prevent oil splatter and it catches the drain plain and crap - approximately 24 inches across / circular

[@DocJeep1]

My favorite!! Love my 94' and 95' Cherokee 4.0!! Thanks Ray!!

[@erikpreston1805]

One of the most interesting oil changes I’ve seen.

[@imagseer]

It would appear that those snake oil cleaners really do work; I hope Ray gets around to showing us what the filters caught.

[@edifyguy]

@@imagseer It depends on which ones. Some are definitely better than others.

[@eaglerider1826]

Anyone else notice that Ray left the oil drain plug magnet on the bottom of the lift arm . I think Troy grabbed it .

[@AquaPeet]

Yes I saw the dangly bits!

[@sarahshipman413]

Yeah I noticed that too lol

[@richardalexander7089]

At least attached to the lift arm, he knows it will stay in the shop. 😊

[@kennpeters1973]

I've realized why I like Ray having Troy in the shop. Ray gets to banter with someone like he occasionally did in the other shop. Didn't realize I missed seeing/hearing that. It's a good dynamic for him. Also good to see Ray teaching.

[@theundergroundlairofthesqu9261]

Yep, when I first round Ray he had Peter working in the next bay.

[@StrongDreamsWaitHere]

I’d probably change the oil after 500 miles or so. Might also drop the pan and check the pickup tube.

[@c_red-derb]

Ray has given me the inspiration to get back to automotive work. I did miss it.

[@johnmarino4085]

I’ve found that pouring oil with the opening at the top instead of the bottom allows air to displace the oil eliminating the glug glug effect

[@NoWr2Run]

I hold the jug sideways.

[@thomas7770]

I prefer a funnel.

[@NoWr2Run]

@@thomas7770 ? We're talking about How you pour the oil not what you pour it into.

[@thomas7770]

@@NoWr2Run oh, in that case I go with a 47 degree tilt of the oil jug.

[@goose32373]

Back in the day when we had oil cans, you would make a hole in opposite sides on the top. One for pouring and one for air. That's got nothing to do with this conversation but it reminded me of that.

[@davebaker489]

I did a engine flush ONCE before. (also on a jeep) It cleaned the engine so well that oil started leaking from each and every place possible. Like I said once!

[@handbananaistherapist642]

Years ago, a buddy of mine had an old Ford truck with a 300 in line 6. It had a brazillion miles on it and it ran ROUGH! He was ready to ditch it, but I had an idea. We drained all of the oil and filled it with 5 qts of ATF and ran it for 30 mins. Drained it (all kinds of weird gloop and glop came out) filled it with 20w50 and it ran like a champ!

[@john7017]

If you keep the oil changed regularly, that engine will go 500,000 miles no problem.

[@jsh6952]

Those old Ford 300 I6 motors can last a million miles. They were originally tractor engines in the Ford and Fordson tractors from the 1950s. Low compression long stroke engines, you could almost run them on any liquid that would burn....

[@SqueakyChase]

That young man is getting an invaluable education. Good job Ray.

[@robertsturtevant6185]

I love when Ray is bantering and at the same time teasing Troy…….it’s like Ray has gone back in time and is doing it to his younger self 😂😂😂

[@johntarver5684]

Troy gets teased about not wearing shirts, he should get Ray on wearing shorts 🤣

[@Rekuzan]

The kid still needs to learn how to dodge a wrench because, yaknow, gravity! I can't count the number of times I've accidentally tattooed myself on the forehead like that... 🤣🤣🤣

[@pcspecialistpdx]

It's like going back in hisTroyRay

[@bryanfiftycal]

67 year old mechanic. Back in the day we would put a quart or two of Ford ATF in the crankcase. It did a wonderful job cleaning push rods and eliminating sticky hydraulic lifters. I bought a used 76 Blazer in Alaska. When I got it the engine would clack at 50F for about 15 or twenty minutes. That's how bad the sludge was. After two oil changes with 2 quarts of ATF and Mobil One synthetic the engine would not make a sound at -40F. ATF is designed for tremendous pressure and long life so if you aren't racing during the cleaning cycle it does a really great job. Love your channel and your integrity.

[@bryanfiftycal]

That was supposed to read "not make a sound at -40F

[@pebosk]

I saw the drain plug magnet hanging on the bottom of the rack when it was going down, hopefully it didn't crush the handle.

[@SpankyCool-ib3pc]

Please never stop throwing those spray cans. True wrench man class. Your #1

[@JimmyMakingitwork]

I’ve had a couple of these that you could rock the valves 1/16 after pulling the head apart. But the bottom end was ok. Crankcase flush and Decarbon helps a lot of them also. But it seems hot and miss. Nice work.

[@grahamheath3799]

Hot stuff eh??

[@hateforall4012]

I love the XJs!! I have a 92 and its a beast!

[@ChurchOfTheHolyMho]

re: that gasket... I wonder where that super scraper tool went... I have no need for such a tool, but it has been on my "like to have" tool list since Ray showed it some time ago. lol.

[@thomas7770]

You referring to the carbide edge gasket scraper? Good tool, two thumbs up 👍🏻👍🏻

[@legionofanon]

I bought one because of ray. I havent used it on my truck yet but I did use to to remove some silicone gunk from around my sink drain, its super nice

[@ronaldsmith6745]

That is what I was wondering.

[@scpballer2171]

When Troy got splashed by the hot oil.... That scream tho.

[@jcnikoley]

I learned the hard way not to poke my finger through the foil cover under the cap. Without realizing it, a piece of foil broke off, and when I poured the fluid, a piece of foil went in. Now, I cut and peel the foil.

[@jhonditch4269]

it is ok those who like to engine repairs or replacement say do not change your ways

[@gregoryheim9781]

And what happened? What monumental disaster befell that engine from that itty-bitty piece of foil? (Ya know, not every piece of debris that gets into an engine is the end of the world.)

[@DustinDoesStuff]

@@gregoryheim9781 If it's a small piece, it will get sucked into the oil pump, it may or may not damage the oil pump on it's way to the oil filter. If it's a big enough piece, it'll get caught by the pick up screen and starve the oil pump of oil. Either way, it's never good for foreign debris to fall into the crank case.

[@calvinevans8305]

It's one of those things that bug me when I open those bottles. I poke them open and peel back the foil and plastic before pouring it.

[@MrSpartanicus]

I just got a funnel that has a piercer and a filter screen.

[@DennisDodd-ke7bd]

It is a great pleasure to watch a "Professional" mechanic and a truly gifted vehicle technician at work. Ray is worth every penny he makes and then some!!

[@gibsonj5035]

I to was interested in how well the 2 gals of cleaner would perform. I appreciated you removing the valve cover twice so we could actually see the job the cleaner had done. Hope you film the opening of the filters to see what is in them. Excellent video!

[@titaniumman_22]

Since you guys are now XJ mechanics, I’m bringing mine in from Colorado!

[@bryantench1178]

You should tell Troy when pouring things to turn the spout so that it is top most and the handle of the jug is at the bottom. The liquid will flow nicely without the glug glug effect. Just a suggestion.

[@ferrumignis]

It makes it hard to start pouring accurately with the spout at the top as you are that much further from the oil filler or funnel. Holding the jugs sideways is a good compromise IMO.

[@COBRO98]

I was thinking he should teach him when & what gloves to wear not to mention safety glasses.. these chemicals are toxic & many are linked to cancer. You make money with your hands & eyes, always protect them.. I’ve personally witnessed a tech lose eyesight in an eye

[@mikec3955]

if you hold the bottle so the handle is horizontal (sideways), the fluid won't block the hole (Which is what causes the glug-glug)

[@ryans413]

Or you can turn the jug sideways that works too

[@dotar9586]

Was that Troy's first "on air" pouring things?

[@sparksalot4950]

Gosh Ray, red rags galore and a bonus fender cover, now that's 1st class !!!!!

[@jtjones4727]

I think that's the most love that old Jeep has had in many moons.

[@DocJeep1]

The gray vacuum line goes on the top of the heater valve. 👍😉

[@Be__Brave]

Hello everybody good day to you ❤

[@mikehunt908]

Back at you 👌😎

[@thomas7770]

Hello people, please excuse me while I add a quart of oil to my truck, it’s a piece of $hit.

[@AquaPeet]

Hey hey! Good day to you too!

[@LouieG777]

@ 38:12 Ray couldn’t fight the urge, he just had to get in on that Brake Cleaner action. He couldn’t let T-Dog have all the fun. 😂😂😂

[@redzed40]

I bought a car off a workmate once who told me he had for some reason it had a oil change but he had paid a bit more for engine flush too..driving it about a few weeks I had the oil light flick on a few times..looking into this i checked oil which was fine so put it down to dodgy connectors on the sender unit..so I cleaned all the contacts and the problem seemed to have be have cured..next day I was driving to the airport with the family in the car and driving on the motorway at 5am at 70mph the oil light flickered ten 10 seconds next 300 meters it came on solid before i could pull over the engine blew up and threw two crank rods though the engine block also resulting in a fire..lucky i had a fire extinguisher..turns out after stripping the engine down the oil pickup strainer was blocked with carbon that the engine flush had dislodged and starved the oil supply resulting in engine seizing, a very expensive oil change

[@Parknest]

Some oil flushes will dislodge the deposits but leave them elsewhere in the enigne. This is why you do an oil flush just before you drain the engine oil to get rid of the depsoits before they end up elsewhere in the enigne. The BG products get round this problem by keeping the deposits suspended in the oil so that they will all come out when the oil is drained. I suspect that whoever did the oil flush just added it after the oil was changed. Anyway, I swear by BG products myself and I absolutely trust them.

[@thebulltoo2875]

Can never stop the 4 liter from leaking oil, just slow it down a bit. Impressed with the cleaner.

[@Hankie56]

I always loved to see the learning curve of my trainees. The more eager they are the faster they learn. Good job Troy 💪

[@dginia]

I love watching you! And while I did not think I would see this again, at 40:00 you again showed us you are out to launch!

[@ronsloan7662]

Hey Ray and Troy, that was a great video! That Jeep sounded just awful when you pilled it in and after the engine treatment it sounded like it should with no smoke. That stuff really works. Cheers!

[@ianmcleod8898]

Castor Troy needs to develop his own long pouring technique. So Castor Troy and Rainman Ray can have a long pour challenge.

[@domfer2540]

Just think, we did not have those expensive additives when growing up, we used kerosene.

[@derekhobbs1102]

Kerosene is now really expensive in Australia.

[@pcspecialistpdx]

a lot of us used ATF and #2 diesel (though #1 would have been better).

[@colinm1325]

Hey Dom, does that work in Diesel engines also? Thanks

[@Casmige]

B12 chemtool….by the gallon.

[@creekdweller9662]

Any a owner of automobiles, I can’t stress this enough. Change your oil every 3,000 miles. Oil filters do not trap carbon. The percentage of carbon only rises as the miles tick off. And where do they land and cook off but around the piston and oil control rings. Every 3,00 miles keeps the carbon to a minimum as it winds its way through the system. Car makers tell you that every ten thousand Miles is recommended, but keep in mind, they are in the business of selling cars. The cleaner you keep your oil the longer the engine lasts.

[@mikeh6876]

Interesting video. Lots of work. Hope the "burns" heal quickly. Quick note: if you had sprayed the inside of the valve cover with Purple Power and let it set for a while, all of the grime/grit would have come out much easier.

[@shamanosarcasm9800]

I've used Purple Power full strength on a Subaru and Nissan valve cover and it got off all but the worst baked on varnished oil. I even used it on a rag to wipe the internals under the cover to remove baked on oil residue

[@mikeh6876]

@@shamanosarcasm9800 I have a K&N Air Filter and clean it about twice a year. I soak it in the PP and it lifts off all of the dirt and oil. Then I rinse and soak in a mild Dawn and water solution then rinse, dry and reapply K&N oil. Always looks almost like new.

[@hellenahandbasquet]

thoroughly enjoyed this video. good to see you and Troy together working on a vehicle. Can't wait for more. Keep it up!!

[@SkorpyoTFC]

I've been using those BG kits at work to clear up badly neglected engines and get a conclusive answer on whether or not oil neglect killed them. Seeing the actual results is a real treat.

[@mikep3509]

A pedestal-mounted bench grinder with a wire wheel installed makes quick work of the cork gasket. It’s also great for cleaning up the threads on crusty bolts.

[@ranger178]

i use my bench grinder wire wheel constantly it is great for rust removal

[@davidcraven277]

Try using a quart of atf its all thin oil and detergent run for a few days and change out works pretty good

[@nickinflorida777]

I am waiting for the day when Ray throws the brake clean car across the shop floor and it lands in the upright and proper manner. That will be a very very good day. Let’s go!

[@AliasTekTV]

I almost initiated the Pepsi cleaning process on my screen with the deer gif LOL

[@rafirafilandzki8354]

in my country it was done with kerosene and it worked, I wonder what the difference is in the effectiveness of the new will to the old solutions.

[@eaglerider1826]

You are correct . 30 years ago we also used kerosene here .

[@steventsunami9506]

I love your channel, but I especially love the Jeep XJ videos. I've been wanting to try this with my 88 Wagoneer XJ. Thanks for showing the way!

[@ryans413]

Troy not knowing Face Off or who Jon Travolta was just made my day lol

[@hestheMaster]

Awesome seeing you and Troy your Padawan, working together a little more on camera. Not a Jedi yet he is.

[@chillvids4009]

You need a parts washer . A small brush and solvent does way better job than brake cleaner and is way more cost effective . Great video

[@forgetfulme1719]

that is Oscar winning acting moment, throwing farther each time, now he can have a Brakeclean contest with Troy, who is the first to empty a can.

[@kasmanien]

Obviously,but then he wouldn't be able to see you get all anxed about it and post these comments. LOL

[@CodycoWeb]

He has one in the corner but doesn’t use it

[@forgetfulme1719]

@@CodycoWeb sorry for Troy who will pay dearly to breathe in the BK solvent daily. He tried to cover mouth with a cloth.

[@kell8603]

My dad taught me to use a sharpened metal putty knife for scraping off gaskets. Works pretty well!

[@AB-jk7tw]

Great video Ray! Really enjoyed watching the process and how effective the cleaners were.

[@kennethgrimes5494]

Ray you are a genius for real,you make it all look so easy.

[@kevincurry4735]

Happy Tuesday Ray. Very excited to see this service as that Jeep is a smoker.

[@Sir_Uncle_Ned]

Tandem brake clean. It’s a wonderful sight. You are training Troy well.

[@samduty554]

That was definitely a great video.❤

[@chevyboy.0448]

Garden house fix in the beginning got me 😂

[@44hawk28]

Put about a half a quart of transmission fluid in that thing and it will do wonders for the valve guide seals and the pan gasket probably. And it will do the final cleaning of most everything in there. Marvel Mystery Oil works great about a week before an oil change especially in that older style engine. It even works good in the new engines especially things like a 5.4 L Ford that has those small oil passages which operate the cam phaser. As well as the 4.7 and 3.6 others that have the hydraulic valve lash Adjusters.

[@Cherokee93]

Great video and when you got the cables installed you called the cruise control cable the kickdown cable, kickdown cable has that button on it to adjust it

[@robertlacob8831]

Nice results Ray! Sometimes that works only temporary and sometimes it last a long time. That engine surely wasn't taken care over the years.

[@JW-xn9fj]

An old lad in the workshop I started out in many years ago used to dribble brake fluid down the carburettor air intake to “free stuck piston rings” and clean out “all the ****”!!!

[@jc3745]

While I love the brake cleaner jobs, wouldn't a proper parts washer be more economical for things like valve covers and oil pans?

[@mws3779]

That old AMC derived inline 6 has been a workhorse for decades, and i6's are naturally balanced.👍

[@chinbin2006]

Ray, why do you not have a parts washer? It must be more cost-effective than using brake cleaner, plus using the brush will mechanically help remove the gunge.

[@rickgalla3377]

Great question

[@sparksalot4950]

He does, name's Troy !😊

[@desotosky1372]

Has one. He commented before it failed. Question is..... did he or is he going to fix it.

[@robertpayne6960]

I've been internally screaming this to myself almost every video... a little actual rubbing with a rag/ carts cleaner brush goes a long way with the final clean up rinse with brake clean. I know Ray has his "Stich" with the whole "shiny" but it really aint all that clean just blasting a whole can at it in one go.

[@christopheranderson8275]

Great explanation of what typically happens to newer engines in your intro! That’s the information I’m looking for right there. Having a better understanding of what commonly fails really helps narrow down things for me. Thanks!

[@ThePewski]

Its always great to see mechanics using impact guns to make sure they over torque and potentially strip threads.

[@chaddelong6795]

This is only the beginning of the adventures of castor Troy and ray and I like it 💪🏻

[@xltoth]

Good job. You saved the program. Good for another 100k.

[@billymcloughlin]

Ray, we need a review of the amsoil brake clean. From one dealer to another, it's for science! Haha

[@jtjones4727]

I personally always just buy whatever the cheapest brake parts cleaner I can find. At Walmart you can get the cheap stuff for like $2.99 a can. Since it's going to get used a can at a time pretty fast, it's a tiny bit cheaper. Also, some blends of parts cleaner are not flammable, while most are. Just something else to note if you ever use it as a substitute for starting fluid.

[@tonybarkdull1199]

I had a '87 Jeep Comanche that I neglected when I didn't have much money. To clean the engine, I used the Slick50 product and it DID break up the sludge, so much so that the pick up tube was getting blocked. I dropped the pan and is was full of sludge. But the underside of the engine was a beautiful AND clean amber color. Cleaned out the sludge and it ran beautiful after that.

[@justicecenter]

That straight 6 was one bear of an engine. Wicked good low end torque.

[@ChrisCov79]

Caster Troy’s oil in the face scream could be a sound bite for when you touch something HOT!

[@MikhailScottKy]

If it continues to smoke you might want to check the stem seals. It seems that the 4.0l engine will be a little smoky if those get hardened.

[@mikec3955]

Putty knives work great for Cork Gasket Removal... they're thinner than a screwdriver, and flexible enough to get under the cork.

[@OGYettie]

Gotta love BG products seem to do a really good job.

[@kevinmurphy3464]

Proof that you should service your oil and filter every 5,000 miles since it’s just such cheap insurance for your motor. The guy is lucky it’s a 4.0 boat anchor which are hard to kill even when neglected. Reminds me of the 7.3 Powerstroke. I have never even heard of this type of cleaning system that Ray used. I’m interested to see the oil filters on the next video.

[@michaeljohnson4578]

The smoke looked white not blue, is that just because of the camera? Keep up the good work!!

[@ferrumignis]

When it's oil smoke you only see the blue tint clearly when it disperses out into the air away from the tail pipe.

[@ragingbull5883]

'grab me 1/4 extension. That's 3/8 drive'.' Been on both ends of that convo, you're an AMAZING teacher! Glad to see you running your own show like a champ

[@legionofanon]

Ah yes I love a good scientific process engine cleaning. thanks ray I cant wait to see the results

[@kennethknight9911]

Don't forget the zip tie on the trans cable!!

[@joemuncie9187]

Nice video Ray, as usual. How do you feel about pre-filling vertical oil filters? WRENCHING WITH KENNY and I think that any reduction in "dry run" time is a good thing. I can't imagine any negative side effects, but please weigh in. Thanks.

[@neilharvey94]

It was very satisfying to see that procedure actually reduce exhaust significantly.

[@rayshutsa6690]

Congrats to Troy for keeping the shop clean. Both of you are making a great team.

[@garnersgaming9290]

Your videos are great watched you for years always entertaining

[@kassemadam3005]

Im a regular here, but this video will prove to be super useful to me as I likely have sludged up piston rings that is causing a lot of oil smoke to be emitted from my exhaust in my 240sx. Thanks so much for making this! I have already replaced my valve stem seals while rebuilding my engine head (have not touched my core engine internals yet), and ever since the blue smoke issue persisted, I was planning on pulling the engine out and doing a full rebuild. I am wondering if it would be worth to attempt this first. If I have excessive oil burning, how likely is it that it is due to piston rings being really sludged up versus them being too worn (along with cyl walls)? The engine sat for 6 years before I bought the car. Since the bp kit you used is $~300, I am weighing my options.

[@voxexquis]

Pull your spark plugs and check for oil residue in the chamber. Get a compression test done and record your numbers. Consider picking up an engine bore scope if you'd like a view inside the block before you tear down your core for a rebuild. If you're working with a ka24de like I think you are and you've rebuilt the head, rings may be gone and looks like you're in for rebuilding the internals with an overhaul kit and having your block tested/machined. A BG service like this will no doubt clean up your rotating assembly but I'm skeptical on whether it'd repair an internal seal by cleaning out buildup and debris. Best of luck to you

[@cappscustoms]

I am absolutely loving the garden hose pipe repair job on the pcv valve. Impressed!😂

[@untc419]

Love watching your videos, hopefully when you get your third lift fitted. Looking forward to seeing more of the wife unit doing more training on repair. And looking forward to Troy interacting more.

[@petersomma4407]

What happened to your fancy oil filter removal tool?

[@opendstudio7141]

New is the keyword. Old habits die hard.

[@PlymouthVT]

I like the bungee cord on the hose trick. Thats an up...I'm going to use that one thanks.