Finally somebody puts these little motors to good use and actual RC car not just a running stand this is awesome build
@A_Slice_of_Gheese4 ай бұрын
i literally just discovered your channel pretty cool stuff.
@scaleaddiction4 ай бұрын
Thanks, welcome on board, glad you like my work
@UnreasonablyIrrelevant-gv8xx4 ай бұрын
Don't stress having problems with the engine. Trust me, its not your fault. These things always have issues Edit: I think we're all thinking the same thing for when this is done. Body kit 😏
@scaleaddiction4 ай бұрын
Thanks man, for sure 🙏🙏🙏
@UnreasonablyIrrelevant-gv8xx4 ай бұрын
No problem
@NBC_NCO4 ай бұрын
Recommendation... After you are done building the body, I would make a silicone mold of it. Then, I would fill the silicone mold with plaster of Paris to make a "solid block form" of your car. The solid block will now become a mold for vacuum forming a lightweight lexan body that you could sell to people like me and others.
@7badtothebone4 ай бұрын
I’ve always wanted to go forth with this but I am unfamiliar with forming lexan/vacuum form. Is it a simpler than I think
@NBC_NCO2 ай бұрын
@7badtothebone I'm not sure it's something I wanted to try myself. I've watched a bunch of videos on it, and it doesn't look too difficult.
@7badtothebone2 ай бұрын
@@NBC_NCO I’ll have to watch a video too!
@ViperScaleModels2 ай бұрын
Nice job! I just bought the kit. I'm super excited to use my semto engine for something other than a display! Thanks!
@scaleaddiction2 ай бұрын
That's awesome, Shear your progress on scale addiction facebook group, I will definitely shout you out 🙏🙏
@ViperScaleModels2 ай бұрын
@scaleaddiction thanks for the shout out, I will share my progress! I also cut up the chassis into smaller pieces to help with size restraints.
@heuerspitstop4 ай бұрын
Nice 3D Print man, I subscribe 🙂
@scaleaddiction4 ай бұрын
Thanks for the sub!
@Smonjirez3 ай бұрын
I am so in love with this project. I'm just really concerned about the angle of the driveshaft to the gearbox though.
@bjhbjhbjhweeee4 ай бұрын
This is the most advanced and physically close to reality project with scale engines. I'm looking forward to the day of the shakedown. To be honest, it would be cool to run on a track long enough.
@MrOpresley2 ай бұрын
GREAT BUILD!! I WISH I COULD DO THIS!!
@scaleaddictionАй бұрын
You can do it!
@jellyman1404 ай бұрын
Always get so excited by these videos! Can't wait to see this thing driving! Roughly how much do you expect it to cost when it's done?
@scaleaddiction4 ай бұрын
I really don't know for now, maybe after I finish everything, I think it will be under $1000 with all the wasted test prints
@jellyman1404 ай бұрын
@@scaleaddiction wow, that's really not bad at all, considering those engines cost a few hundred! Once it's done I may have to make one myself, love it!
@GeorgeChukwu-om2pe4 ай бұрын
Nice work bro
@scaleaddiction4 ай бұрын
Thanks 🔥
@curtisnewton8954 ай бұрын
nice I also want to add that engine in my RC car
@scaleaddiction4 ай бұрын
It's really fun
@wutangclams99364 ай бұрын
HELL YEAH
@scaleaddiction4 ай бұрын
Thanks
@Theboyz-sh5ui4 ай бұрын
Nice
@scaleaddiction4 ай бұрын
Thanks
@neidivan12954 ай бұрын
Legal top de mais 😲😃😍🤩😍👏🏼👏🏼👏🏼👏🏼👍🏾👏🏼
@scaleaddiction4 ай бұрын
🙏🙏
@ArdavanIzadiyar-w9l3 ай бұрын
Is there any part 14 coming out?
@lisalohand47534 ай бұрын
👍👍
@scaleaddiction4 ай бұрын
🙏
@Moi-rz2lw2 ай бұрын
Would it be possivle to the engine to get so hot that the 3d printed parts starts melting
@scaleaddictionАй бұрын
Sure it will, but I will 3d printed it with different material after I know everything works good
@mirandahotspring40194 ай бұрын
Those engines can be a problem, they flood really easily.
@fungalcoffee4 ай бұрын
Is their any concern over the heat produced by the engine? I can't imagine 3D prints being happy near it
@anonrider88704 ай бұрын
that's why I duilt this electric, and it already runs
@scaleaddiction4 ай бұрын
Of course it won't hold that heat, bit I have carbon fiber filament and print the chassis, otherwise I will send it to pcbway which is sponsored for this project to print me with heat resistant material, but till I make everything sure then I send them the file
@ajahniepemberton18604 ай бұрын
ali can you please update the cults3d links for the supra Its been months since its been touched so the links are inaccurate and also not up to date please fix this like acutally fix it and not just say "Sure, I will look at them today" and blow me off
@scaleaddiction4 ай бұрын
I did last time and all where working. Accept the caliper were out of stock, which link not working for you ?
@ajahniepemberton18604 ай бұрын
@@scaleaddiction the link for the Arduino is still in there, even though it was never utilized the link for the beans was wrong. I got the size of rice greens and the link for the three speed gearbox is not there among other things. The links have not been updated in two months, so it’s no longer up-to-date with the videos which is my main issue
@anonrider88702 ай бұрын
will the project be continued?
@scaleaddictionАй бұрын
Yes, here, new driving video kzbin.info/www/bejne/fIi4qnqbZ76nack
@huguesJojo4 ай бұрын
Make it twin turbo
@scaleaddiction4 ай бұрын
That's great idea bro 😅
@bonganihalimani95724 ай бұрын
3rd comment yay
@scaleaddiction4 ай бұрын
🙏
@frechesfredchen4 ай бұрын
First comment yay
@scaleaddiction4 ай бұрын
🙏🙏
@I_Like_White4 ай бұрын
Second comment yay
@scaleaddiction4 ай бұрын
🙏🙏
@faaadlee4 ай бұрын
bang mentahan part 14 bang. kirim ke wa aja
@Jandrix11YT4 ай бұрын
literally, all the video was just for build the trunk bro, make more longer videos
@Bianedden4 ай бұрын
Looks like you don't know how much work process goes in when you make something from scratch, it always looks easier when you see edited video, but he doesn't show all the failed prints, tests, measuring, designing
@Jandrix11YT4 ай бұрын
@@Bianedden ok, fine, but i'm just saying that i prefer wait some days and watch a longer video with more content