SCARED of Heights This Boat Job Isn't For YOU!!

[@WillFixThat]

What are your experiences with Starlink Internet .... we'd like to install one but your house is 3 stories high Karriann is definitely scared of heights!

[@christopherloughlin6790]

I’ve done 5 installs and they have preformed as expected. Fast. The only time I’ve seen them slow is on older smart tvs that can’t perform as fast

[@WillFixThat]

@@christopherloughlin6790 We need eed one installed on our roof so then we are limited to sucky Comcast!

[@Makoonga]

I'm surprised how much I enjoy watching you fix stuff on boats..

[@WillFixThat]

What are you enjoying?

[@paulkersey2179]

I love white interior. That Starlink set up has been a real boon for RVers who work from the road, very reliable, but not cheap.

[@WillFixThat]

Paul you need to wear white gloves to not get anything dirt 🤣 when Matt researched if for the house the price seemed comparable to what we pay for Comcast!

[@richardtruesdell8289]

Just curious, why don't you use an impact driver for all of those screws? That's a lot of work for a screwdriver.

[@WillFixThat]

I’ve been looking for a good power screwdriver, just haven’t found it yet. Thanks for watching.🙏

[@jetlag4754]

Wow I sure feel bad for you buddy that broke his hip. I just had a hip replacement revision and that was bad enough. Hope he recovers quickly.

[@WillFixThat]

Yes a broken hip & surgery… all takes time to recover.

[@KO-pk7df]

I was wondering if you ever have to use the "connection enhancer" grease on some small low voltage connectors in place of the dielectric grease? The "connection enhancer" grease is considerably more expensive but sometimes that's what it takes to keep those kinds of connections working and dry.

[@WillFixThat]

No we don’t use it.

[@Zortak1]

Love the videos! Keep ‘em coming.

[@WillFixThat]

More to come! How long have you been watching?

[@mikesd19doe62]

Great videos. I’m glad I came across your channel… I’ve been a boater on Lake Erie for fifty years ( I’m 64 lol ) like I said your videos are great and your knowledge is amazing !! Easy to see you all are very good people. Thanks , Mike …PS I currently have a 1986 Glastron CVX 16 like new ! , 22’ Four Winns horizon , and a 370 Sea Ray Sundancer ….

[@WillFixThat]

You rock Mike thanks for the feedback! Lake Erie … wow a long time you boated there. I (Karriann) grew up in upstate NY in Rochester.

[@Sojourning_]

lift him up in prayer, I'm Vietnam combat engineer, with decorations, 67 to 69, dealing with appears to be agent orange cancer, Col Glenn Williams was in charge of all medevac for one year, agent orange took him, they would fly off to the side hang back, but of course, they were saturated, His remains were placed in Arlington. something 15 years ago, we were pales. his home was SD CA. I have other friends who were with Riveron, and so on. brothers in the Lord, men of the faith.

[@WillFixThat]

Sorry to hear about your cancer appreciate your service… we are both Navy Veterans!

[@scottmaz4063]

I can't wait to get back to Florida. It's been cloudy foggy and cold.

[@WillFixThat]

I just heard that same thing from a guy in Buffalo!

[@patricksteliga4252]

I enjoy watching the repair work. It is refreshing seeing someone do the job the right way and go the extra mile. Owning boats and having to deal with repair people has not been fun. Even the large "dealers" service groups can be questionable. Your content jumps around and can be hard to follow. It would be nice to see the boats you are working on (without disclosing vessel names).

[@WillFixThat]

Yes we try not to disclose vessel name if we are working on it! You mentioned our videos were hard to follow…. Because of what? Can you fill me in? I’d love feedback!

[@Sojourning_]

MORE ZINK........... We / I had it in the coolers, where there was coolers it had a zink plugs installed along with having it in the water coolant filters, every little bit helped. as for all the salt, don't know how well that would work

[@WillFixThat]

Add some more 🤣

[@ThoughtfulWander]

Great episode! Thanks for sharing! 👍👍

[@WillFixThat]

Thanks for the encouragement and 👍👍

[@ThoughtfulWander]

@@WillFixThat 👍👍

[@fatcat-hc4pj]

👍👍 the joys of boat repair

[@WillFixThat]

Don’t you love it 🤣 our chaos!

[@fatcat-hc4pj]

@WillFixThat yes I do. I've worked on some boats I know it isn't easy

[@WillFixThat]

@@fatcat-hc4pjty hanks for watching & sharing!

[@Lighthouse6b]

Your radar antenna may be too close to the Starlink antenna when active.

[@WillFixThat]

Yup tested it before mounting no issues…. Actually in an upcoming video Matt does a quality assurance visit to the customer & they are loving their system!

[@christopherloughlin6790]

Thought about that ahead of time and the main issue is when people used the RV style antenna. Also the radar is higher than the antenna so it will be transmitting over it. If the radar causes issues then the back up plan was mount it to the right or left even lower.

[@craig162]

Great Video.

[@WillFixThat]

Thanks Craig you like heights 😃

[@rustywrench2119]

Just curious, how do you charge out a top off with refrigerant? We use to have to weigh it out and charge by the pound for the 20 pounders.

[@WillFixThat]

Yes Matt weighs or close guesstimate!

[@Christopherbarb-t9c]

great Job // you guys fix more leaks than a plumber

[@WillFixThat]

We do our fair share of leaks

[@honeybunbandit1]

Starlink that's fancy internet hahaha 😆 and I'm good with Heights up to a certain point 😅 and I can't do all white interior I'm afraid anything I touch will leave a dirt mark 😂

[@WillFixThat]

Yes you can’t touch anything unless you’re wearing white gloves! 🤣

[@honeybunbandit1]

@WillFixThat lol no kidding I feel like I have to wear a hazmat suit when walking through a all white boat

[@WillFixThat]

@@honeybunbandit1probably recommended 🤣

[@honeybunbandit1]

@@WillFixThat you should see how much plastic sticky wrap I use on a boat and boxes of boot covers I go through lol

[@WillFixThat]

@@honeybunbandit1I believe it …. It saves you time later on not as much clean up! Hope to get to the post office soon …. Trying to let the craziness die done with all the people wanting to do returns!

[@dustoff1472]

Why would you not use the heavy duty plastic fittings on everything so the salt water would not rust? Tks.

[@scottmaz4063]

Don't you use a sealant for the freon? If there's a leak.

[@WillFixThat]

Yes sometimes we inject epoxy into the system.

[@alholliday1808]

AC panel display didn’t come though on the video

[@WillFixThat]

Hmm not sure what you’re trying to tell us? What minute are you referring too?

[@alholliday1808]

Your last panel check you were reading out the different setting and conditions All we saw was a blank screen Don't no if it was camera angle or display type the camera couldn't capture It's all good.

[@WillFixThat]

@@alholliday1808thanks for the heads up GOT to love technology 😂

[@JimHeggins-on8mv]

Please fix the audio. Love your channel but hard ass $&@“ to understand what is being said.

[@WillFixThat]

Was it the wind? It’s been very difficult on vids! Sorry 😢 appreciate you mentioning it!

[@fishingfool2644]

I like to see the process. Don't edit so much if you can.

[@WillFixThat]

@@fishingfool2644yes we may move that way a little bit more but sometimes things take hours not minutes to get to where we are… 😮 some jobs take weeks! Are previous video as example … a ton of time & still not done!

[@djcordes4352]

That boat is a disaster. I’ve walked on boats before and felt a soft floor. I’d never touch it or spend any money on it!

[@WillFixThat]

Yup it happens to us sometimes too! People have no idea their boat is falling apart!