SCCY CPX-1 CPX-2 32 Round Sleeve Option? Short Answer. No

[@smokkydakidd]

Does these fit a sccy cpx2 gen 3

[@bloodywheels]

We cannot confirm fitment on the gen3. Hopefully someone else can chime in who has tried them in a Gen 3.

[@Antihero-13]

Did you try?

[@smokkydakidd]

@@Antihero-13no I haven’t yet

[@Antihero-13]

@@smokkydakidd I got it so ill keep you updated 🤞🤞🤞

[@smokkydakidd]

@@Antihero-13 thanks lmk if it jams

[@anthonygonzalez6690]

I just bought two sleeves and a loader with a pen. After watching this. Thank you for creating and manufacturing aftermarket accessories for this platform

[@l.reaves4392]

Hey Bloody Wheels just wanted to tell you I just got my two sleeves for my 15 round mag for my SCCY CPX 1 and what a excellent quality product purchase! I am a customer for live and have left my son and friends know of you great products! Once again thank you!

[@bloodywheels]

Thank you so much! I truly appreciate your business!

[@thomasj.harris5630]

I bought a sleeve from you for my SCCY and I love it!

[@bloodywheels]

Thank you so much! I appreciate your business

[@kevongreen8610]

Just received mine and it fits perfectly no sliding thanks again

[@bloodywheels]

That’s great to hear! I appreciate your business.

[@BAD4U22]

Have ordered from bloody wheels, fast delivery! Got all my stuff for my g 2 c and love it

[@BAD4U22]

Not paid to say that

[@timhayes5156]

hey bloodywheels,you can add a wedge with a flush screw to clamp down on the 32 (back side) this will use Dynamic tension to hold the sleeve in place and with the wedge on the inside If It Moves down on the sleeve it will only get tighter I think that would be a cheaper solution you can still use the same sleeves with a slight alteration for the wedge the only thing you have to figure out is how big of a wedge to put in it your prototype can start off without the screw and a screw once you find The Sweet Spot the process is used to hold wood blocks the size of trees in place it should work on a MAG sleeve this works make a video and I'm not looking for any monetary compensation just a shout-out

[@adrielburned6924]

I got a sleeve from ya last year. Epoxy on 15rd mag. Absolutely love it!!!

[@C.Brown5150]

Good call on the tape. . The 15 round is nice.

[@TheCastleKeeper]

The CPX1&2/DVG1 mags are exactly the same as the Keltec P-11&40 mags, which are exactly the same as the 3rd gen S&W mags. The ONLY difference is the magazine catch notch on the SCCY is 1 cm higher than on the Keltec/S&W. You can take a drummel or small grinder to the Keltec/S&W mage and cut a notch 2 mm above the existing notch the same size as the existing notch, and they will work in the SCCY. SCCY did this because they wanted the mag release button to be higher and easier to reach for smaller hands. The Keltec 32 rounder has the nubs like the Taurus does.

[@adrielburned6924]

This is true! I have a cpx2 and keltec p11. I swap mags all the time after I ground the notch out.

[@rycherdon2352]

A drip of jb weld on each side bro that should definitely do it it can also be filed and sanded down

[@michaelkuhle9866]

Used electrical tape myself once to snug up a 226 .40 extended promag to seat in a p30 lol, worked great though. Will be checking these out soon!

[@TheSeaLark]

Well, it would be work but I think if one were to drill holes for, then melt thread inserts into it for sharpened set screws. One could also put tiny itty bitty tack welds on the mag as stops.

[@bloodywheels]

I tried the screw option. I had 4 provisions for screws and it still moved. I could weld tabs on mine, but most of my customers do not have access to welders. So I was trying to come up with something easier for the consumer.

[@xion1021]

Just ordered 3. Look forward to adding to my Sccy

[@juggdre2040]

How do I order

[@buzzlightyear3767]

Try putting a little Blue Loc-tight on the in side of the slide, position is, and clean the body of the mag and see how that works. Just a thought. God bless, and have a great day.

[@Glockpewpew9mm]

Just got my sleeve it’s awesome and it ship pretty fast 💨

[@6luealreadydead]

Well I guess I'm just lucky because the the 2 videos I've watched are for products for 2 of handguns I own that I'm looking to get some aftermarket stuff for

[@peebeme1506]

Exactly- this and my G3c

[@donovancolon363]

Great product ordering mine once I receive my pro mag!

[@bloodywheels]

Nice! I appreciate your business!

[@BRAGGERSLUXURY]

bloodywheels Please don't take any offense to this at all because it sounds like you're great at what you do. I'm wondering if maybe putting some sort of polymer shim on the front and back side of the magazine would work? Then you don't have to wrap the entire thing you just have a piece of polymer that's skinnier at the top end and gets a little fatter at the bottom on the anterior and posterior side of the magazine. Thank you for making things better I just checked this firearm out in a store and knew nothing about them until last week. The only thing that I did not like was the capacity of rounds. 15 sounds great I think the 30 is a little bit ridiculous might be fun to pop off 30 at a time out of that little pistol but I'm sure accuracy goes way down.

[@bottycarmods]

id just glue it on lol. good job on the sleeves by the way!

[@bloodywheels]

Thank you!

[@1hellrazor713]

JB weld

[@MurdaManKaron]

Or use a rubber band under the sleeve🤷🏾‍♂️

[@stusasser5947]

I have the 15 round ProMag and I purchased your sleeve for it it certainly feels better in the hand but the magazine itself is terrible the follower is poorly designed and it is nearly impossible to manually load the 15 round magazine without a loading tool.

[@Shhways]

I just bought one of these and they are awesome I know this video is old but any possibility are going to restock your inventory you are out of every color but black?

[@paulclemons4447]

Not sure if the sleeve is material that can be welded to but if so weld nubs on the sides of the magazine in the proper place and then it will be like the taurus.

[@leekogocrazy2374]

Dose it work for the gen 3

[@GoonLife___]

I got a sleeve frm u it’s so good

[@bloodywheels]

That’s awesome! Great to hear that. We appreciate your business!

[@kmcgz]

All your website shows is the black..i need s neon green one like. Ow...lol...any coning soon?

[@joshuaspencer5822]

make a standard size spacer piece like break the length down where you can make one standard size spacer where it would take 3 of them to fill the length on the 32 round clip or even at a size where it take 4 more spacers it would be smaller and more cost effective

[@ronaldpeterson5598]

What Other MAGS will fit the NEW - DVG-1, ? (S&W model 59 mags?) Would like a 15 round Mag for this SCCY DVG model.. And a Sleeve to take up the Gap.....?

[@ThatVatoKingDirk]

A possible solution if tape isnt something someone wants to use could a steel cable tie. It would create a stop for the sleeve and a tab the sleeve can bump down to. Just an idea.

[@MikeDMADLabs]

Love your products. Great job

[@bloodywheels]

Thanks Mike!

[@xboxbapejii2532]

Very good videos !

[@bloodywheels]

Thank you so much!

[@jerstolp1]

The priceing makes sense

[@skulledmonte84]

Grind the top ends of those sleeves flat so they sit flush up against each other,Do that for how ever many will fit on the mag. Use one that's not grinded flat for the top sleeve on the mag.Maybe even Jb weld all them together.If you use my idea some day hit me up please.

[@bloodywheels]

The printing time and cost for all those sleeves would not be very economical for the consumer. Hopefully I can cone up with something in the future That will work and be cost effective.

[@michealscofeild3360]

Can you please bring back the Taurus g2c 32 round mag sleeve

[@bloodywheels]

That sleeve is still available. It was never discontinued.

[@juanvaldez5422]

Just ordered 3 sleeves. 2 red(lower on the one i ordered from palmetto is red, so) and one black. so the sleeve for 15 will work on a 30 rounder? I'll share my experience once i get everything in and get to play for a minute. I also subd! Thanks for putting these out there

[@bloodywheels]

Nice! I appreciate your business

[@juanvaldez5422]

@@bloodywheels I look forward to it. I also noticed you have AR wall hangers? I may be checking those out to

[@jaredwright9215]

Pretty easy fix. Any kind of rubber band or electrical tape

[@deenoneya169]

Does the 32 round mag work good on this gun thanks I been debating on buying one

[@bloodywheels]

Hopefully someone can chime in. I have not shot this 32 rounder. But my experience with other promag mags is not good.

[@wockfilms1073]

could you drop the 32 mag sleeve print?

[@Yungghostin]

My sccy nine holds 11 standard mag + 1 so I don’t get why they say it only hold 10

[@xboxbapejii2532]

Do you think the 15 round mag for this gun is better then the 10 round the 10 round has trouble feeding sometimes and it’s brand new

[@bloodywheels]

About the same. I had better luck after disassembling the magazine and cleaning, then lightly lubricating it.

[@CgghhFtgh]

Im going to make my own nub thing for the mag

[@ronaldpeterson5598]

Could your sleeve be glued on the 32 round magazine?

[@michaelpalmer4150]

Ok how much for the full sleeve it don't matter the cost

[@ronaldpeterson5598]

Us OWNERS OF the DVG1 9mm, need to know if this 15 round magazine will work in the DVG1 pistol? If so ,you Will BE getting a ORDER for one from me and all other DVG1 owners.. please let us know if this magazine from promag will work, please.

[@guerom1367]

Looking for a mag sleeve for a canik tp9sc. It has a wierd gap in the back was wondering if u made one that would fill that gap in?

[@bloodywheels]

I make those sleeves now. My so for the late response.

[@s.akinribido5894]

Mr. BloodyWheels Went to your website didn’t find G2S 10 rd promag. You do carry it though correct?

[@bloodywheels]

Hi there! The only products we offer for a G2S is a mag loader for the 9mm mags. We do not however sell any magazines at all for any pistols. So sorry.

[@chrissmith4181]

What 32 Rd mag are you using for the sccy? Also the 15 Rd mag I can't find them

[@bloodywheels]

Hi Chris. They are the 32 round and 15 round magazines made by Promag specifically for the SCCY CPX-1 and CPX-2.

[@freda1078]

@@bloodywheels I got the 15 and 32 from Midway arms.

[@JayJay-zb9wy]

Any ideas on after market magazines for the TH9?

[@bloodywheels]

Not sure on the full size TH9 Jay. So sorry.

[@JayJay-zb9wy]

@@bloodywheels no problem!! Thank you for your help!!

[@mfgmookdogg]

Or you can weld a piece of metal where u would put the tape to hold the piece snug

[@ronaldpeterson5598]

Does anyone make larger capacity magazine's for the DVG1?? I would like a 15, 17, round. With a sleeve to make it look good.

[@parkersilvia9594]

any idea when you will be able to make more blue ones ? just checked and noticed they were not an option at checkout

[@bloodywheels]

I am waiting on a shipment on blue filament to print with. So it may be a bit before I can restock unfortunately. I do not have a current timeframe.

[@parkersilvia9594]

@@bloodywheels will wait thanks for reply

[@icet861]

Sleeves for 15 rd are badass

[@zionhill6552]

Kool how can I order the 15 round clip

[@joeyount3864]

If you're printing them , of course that's not cost effective. Have you considered injection molding ?

[@bloodywheels]

Hi Joe! I do not have any injection molding equipment. And outsourcing would take costs up considerably. Printing is very cost effective, but a sleeve of the size explained in the video would tie up my printer for too long. I would have to charge a lot for one sleeve.

[@natedoglara]

Come up with a price for what it would cost for yours to be made and see if customers would bite on it. You may get customers to pay more if they really want it

[@alexperkins8361]

How is the reliability of tht 32 round sccy magazine??? Does it run as good as the pt111 32 rounder???

[@devinsuckerfish6444]

I have one for mine its ok after broken in the spring is tight at first

[@blvxkgxldimperialinc]

Can you make a sleeve for a s&w 659 9mm

[@bloodywheels]

I cannot. So sorry.

[@louisbuchanan5712]

Good day Sir I will love to have the link for your product thank you far 2 kind...

[@bloodywheels]

Hi there! The link to my website is in the video description.

[@torieray8864]

Do you have any sleeves in stock?

[@boogiegmuzikofficial7209]

What would be the best 32 round option for the cpx-2 ?

[@bloodywheels]

The only 32 round magazine I know of is the promag magazine.

[@XeroDegreeX]

Any extended mags for Cpx-2 9mm?

[@bloodywheels]

We do not sell any magazines at all. Only mag sleeves. So sorry.

[@Loveglocks01]

Where can I order a 32?

[@swavey_0008]

I got a question i got the sccy cpx-3 and ion find any Promag for da gun somebody can told me if i can use the extended clip of the cpx-1 and cpx-2 in cpx-3

[@justinrobertson5672]

Does anyone know where I can order a 15rd pro mag for my cpx2 they are out of stock everywhere any help would be greatly appreciated

[@freda1078]

Got mine a Midway Arms got the sleeve from Boodywheels and it is great.

[@ACE21LHC]

Does the g2c mag fit the sccy?

[@bloodywheels]

No. They will not work.

[@ACE21LHC]

@@bloodywheels bet that

[@ACE21LHC]

@@bloodywheels so close but yea no fit

[@yahushuaisking338]

no tape will make it ugly just do what the other mag has with the nubs

[@bloodywheels]

The mag for the CPX has no nubs. That is the issue.

[@yahushuaisking338]

@@bloodywheels oh i know i was just saying that anyone can tac weld some nubs on there or something better than tape lol but me i wouldnt care id just let it slide and deal with it

[@yahushuaisking338]

i was going to order some of your sleeves but seems all places are out of stock of the 15 rd and 32 rd promag so as soon as i find a site to order the 15 and 32 rd promag ill be buying 2 sleeves and a mag loader because i just bought the sccy cpx-2 red dot a week ago

[@bloodywheels]

@@yahushuaisking338 yea. The buying craze is happening again. Everything has went up in price too. At least, the things I am looking at.

[@yahushuaisking338]

@@bloodywheels i got your site saved so ill be ordering some stuff from you hopefully soon

[@michaelpalmer4150]

I will pay for the full sheet for the 32 round the price don't matter

[@Seminolerick]

I can't believe we cannot put a bead of hot glue around it... build up if needed... anyone try this ?

[@rawgaentertainment]

Where are you based out of?

[@bloodywheels]

Wv

[@rawgaentertainment]

@@bloodywheels ok.. so I got u online

[@Eduardo-es8gg]

Yo quisiera uno de esos cargadores en mi país costa rica conseguí el arma por 520$ pero accessorios para ella nosé consiguen

[@Anthony-xr6qj]

Canik tp9 sc 18 round sleeve please

[@bloodywheels]

Just released them today. Go check them out on my website.

[@jerstolp1]

Make em. Long enough

[@an_what]

People if you have a 3-D printer make you a sleeve that’s what he’s doing

[@an_what]

Here’s your solution how many to keep it from sliding down make it the entire length of the damn magazine that is not a hard fix that is a commonsense solution

[@junebug9626]

It's a 11 10 +1

[@karreemgrant1205]

ima tell all my homeboys boutcha website jus keep makin stuff

[@bloodywheels]

I appreciate that!

[@VerdunCecum]

Robinson Maria Harris Gary Brown Laura

[@MacBill-t5h]

8309 Leannon Crossroad

[@bmillersince92]

How is this gun? I’ve been seeing them in my local pawn shop going for 210.

[@natedoglara]

I have had issues with feeding and stovepipe. Random all types of different ammo

[@natedoglara]

But I am carrying it still, I have many guns I like it due to the size and weight. My glock 19 sits at home and my 1911

[@freda1078]

@@natedoglara I have put over 500 rounds in mine, not one problem.

[@natedoglara]

@@freda1078 lucky you. I shot it the other day shot one bullet and stove pipe, pisses me off

[@andyoliver9717]

How do i get a sleeve for the 15 round

[@bloodywheels]

Hi Andrew! The link to my website is in the video description

[@Luh5veMusic]

Try an penny or an nickle

[@4gmsckiez770]

I’m new to owning a cpx2 could I would like to get a extended magazine for my cpx2 could I use anyone 9mm or ??

[@bloodywheels]

No. You must use a magazine designed for the firearm. 9mm is just the caliber. Dimensions are totally different between magazines designed for other 9mm pistols.

[@4gmsckiez770]

@@bloodywheels you know where I could get one for my cpx-2?

[@bloodywheels]

@@4gmsckiez770 I found my mag at grabagun I believe.

[@robaldridge6505]

just sell a 5 pack and let customer stack them..

[@robaldridge6505]

OR use the grub screw idea with a HOLE drilled in the mag

[@johhnybins6037]

Super glue 😅

[@drt6680]

just glue them on lol

[@brianoakman717]

Young Sandra White Elizabeth Taylor Sandra

[@centailbell3945]

I have a simple idea that will probly help it stay in place hit me up ill tell u

[@varietasVeritas]

A little duct tape will fix it. 🤓

[@bloodywheels]

Very true!

[@barrykrajeski5598]

@@bloodywheels No no no you wanna use a bit of JB weld. Make some JB weld nubs on it.

[@jerstolp1]

Be silly but

[@crwnguy]

The want a mag condom.

[@bloodywheels]

Hahaha. Too funny.

[@andystoyarmy9890]

Weld nubs

[@bloodywheels]

True, I can do that. But I am trying to come up with a solution to offer to my customers. Many do not have access to a welder or experience welding

[@andystoyarmy9890]

@@bloodywheels true. I’ll be ordering a few very soon. If I happen to weld nubs on the 32 I’ll send a link. Thanks

[@TheSevenboy127]

I'd like 1 for a 15 rd and also I'm willing to pay for the sleeve for the 32rd lmk ur price on both pls 🙏🏼