Schneider RTU PLC Programming, Configuration & Simulation Using SOMachine Basic Software Tutorial 2

This Software use for Twido PLC & M221 PLC (V1.6)

[@jorgea.palacios8834]

Me ayudó tu video a entender como sacar los valores de las variables del PLC M221. Muchas gracias.

[@industrialautomationguide2886]

Jorge A. Palacios I didn’t understand. Please repeat the question in English?

[@redjdalarezki4869]

thanks for the step by step explanation!!!

[@mdsajjadalam6858]

thank you so much !!! very nice video keep uploading such a helpful video

[@industrialautomationguide2886]

sure

[@nalindissanayake3763]

We have a problem with the start previous state of the PLC program after the power has been off.

[@industrialautomationguide2886]

Battery issue

[@wadib3eed7]

Why M241 is not included in logic controllers list ? i want to use Smachine basic with M241 but only i see M221 , how to add it ?

[@industrialautomationguide2886]

Hi, please try EcoStruxure Machine Expert for M241 PLC programming

[@kader2315]

I'm new to plc programming. I'm trying to scale a PT-100 sensor in somachine basic V1.6 (Schneider PLC TM221M16R) to obtain a temperature range between 0 to 150 deg Celcius. The sensor is connected to an analog module with temperature input capabilities (TM3TI4G). I've configured the input as shown below. View attachment 268 Can someone explain how to do the programming?

[@industrialautomationguide2886]

I will check and update shorty.

[@kader2315]

@@industrialautomationguide2886 I don't understand how i do it, can you help me or I have to wait when you make another video?

[@lovehopefaithlohfmissions3600]

Where is the sound in the above videos? How do I get it?

[@industrialautomationguide2886]

LoveHopeFaith LOHF MISSIONS audio has muted. All steps display by notes

[@rahmatharahap2945]

I have a problem with somachine basic ... I have 2 plc tm221 1 as a master and 1 as a slave, I want to read% mw100 on the slave and transfer it to% mw10 on the master using tcp / ip, I learned to read_var but still can't ... Need help for example video

[@industrialautomationguide2886]

Ya sure I will share link for this... Now I have projects. So in free time I will prepare for query

[@rahmatharahap2945]

I'm waiting your video thanks,, 😇

[@rajeshwarrao9051]

Ho to open or Upload M221 controllerin program using somachine. We are not using memory card also, I try to connect online. And I am getting pasword protected controller and uploading option not highlating. How can I upload this program.

[@industrialautomationguide2886]

Memory Card mostly must for program uploading

[@adarshmp8942]

what if i want to scale to (-1 to 1.5), i tried same way but decimal values is not possible here! Please help!

[@alab1111]

I will share the FB for scaling download link in we transfer. I will try to share latest videos

[@mareadaouar1377]

S’il vous plaît, d’où avoir les adresses ?

[@industrialautomationguide2886]

English pls my dear friend

[@lionfelidae7698]

How do I acquire data from Sepam Units?

[@industrialautomationguide2886]

Means what? Data Collection

[@pumppanel3100]

mov, add ,div, mul ....where? , i don't see

[@industrialautomationguide2886]

Hai Dinh, 1. In So Machine Basic Software don't have MOVE, ADD, SUB, MUL Blocks. 2. After 17.50 duration used one operation block. Use that then use below following steps. i) Move - %MW0:=%MW1 (Means MW1 Value move to MW0) ii) Add, Sub, Mul, Div - %MW0:=%MW1+%MW2 (Use any + - * / ) 3. After 17.00 duration used one comparator block. Use that then use below following steps. i) Output - %MW0 < %MW1 (Use any combination of this < > = )

[@pumppanel3100]

THANK YOU