Scimitar Mini (and an evening stroll)

  Рет қаралды 3,175

Olivier FPV

Olivier FPV

Күн бұрын

Пікірлер: 24
@derelictfpv
@derelictfpv 3 ай бұрын
Hello Oliver I'm 'fullspectrum" on RCgroups and on your 3d printed plane thread there, so far I've printed the Sabre 2 and I'm printing the Scimitar 2 currently. The mini Scimitar looks incredible as well! Excellent work and I I'm loving the beautiful scenery and editing in this video!🍺🍺👍👍👌👌
@grzegorzbrzeczyszczykiewic1793
@grzegorzbrzeczyszczykiewic1793 3 ай бұрын
Этот самолет, что печатаешь сейчас, ты разобьешь 3 раза. У него сильный реактивный момент и самолет закручивает
@terracoon9882
@terracoon9882 3 ай бұрын
That is another beautiful fixed wing you designed! I have completely wrecked my previous printed plane this morning by launching it poorly, so your new design comes in very handy. The original scimitar worked good for me, so I am looking forward to see how this one flies. Thanks!
@sylvainponchelet4188
@sylvainponchelet4188 3 ай бұрын
Super sympathique cette petite conception . Et oui plus c'est petit plus le centrage est compliqué c'est pour ça que je descend pas en dessous de 2.5m d'envergure 🤣🤣 . A chaque fois que je regarde un de vos vols je me surprend à incliner du buste et de la tête pour suivre l'avion 🤪🤪 . Dans mon coin ( pointe Bretonne ) j’attends le retours du beau temps pour reprendre les vols Je vous souhaite un beau ciel bleu les gars
@piconano
@piconano 3 ай бұрын
Another work of art to be printed this week 😃 What is the most efficient (quietest) motor/prop combo for the Scimitar (not mini) for cursing long waypoints? What is the cheapest small flight controller that would run Ardupilot? My models are shells for display as you know, but I like to make one fly. Unfortunately, although I have a private pilot's license, I can't fly RC planes without crashing them.
@handsome_andrew
@handsome_andrew 3 ай бұрын
Hello, thank you very much for your work, it is really very cool) I have one question, what is the best way to fix the "wing lock" inside the wing? Just glue or screws?
@Olivier-C
@Olivier-C 3 ай бұрын
Hi, Between wing lock and wing 2, just few drops of CA are enough
@handsome_andrew
@handsome_andrew 3 ай бұрын
@@Olivier-C Thanks)
@federicojbenitez
@federicojbenitez 21 сағат бұрын
Part 3 of the wing, is very heavy in my printed part, i dont know what i must be doing wrong, assuming that according to what the excel says it weighs 19 gr, mine is weighning close to 50gr. Pla is lw
@dirtydogfpv6905
@dirtydogfpv6905 27 күн бұрын
hi where is the cg on the SCIMITAR Mini just printed one but cant see where the cg is thanks
@tubamanandy2
@tubamanandy2 3 ай бұрын
Excellent video & lovely designed Wings - did you settle on a best C of G for the Scimitar & the Mini ?
@LovesGames113
@LovesGames113 3 ай бұрын
Thank you for having English caption on your video.
@derelictfpv
@derelictfpv 3 ай бұрын
Yes! Thank you as well Oliver!🍻🍻
@jimross898
@jimross898 3 ай бұрын
Do you do 3D design for a living? Watching you work on the design of your planes makes my head spin. I feel like an amateur.
@peterboy209
@peterboy209 3 ай бұрын
Learning by doing i think
@u_fpv
@u_fpv 3 ай бұрын
salut, tu recommandes quelle batterie/moteur pour cette version? la meme chose que pour le classique?
@Olivier-C
@Olivier-C 3 ай бұрын
@@u_fpv salut, 4S entre 1200 et 1500mAh
@u_fpv
@u_fpv 3 ай бұрын
@@Olivier-C d'accord, merci beaucoup
@chrispowell4501
@chrispowell4501 3 ай бұрын
Hi Oliver, I see you are now using a Bambu Lab printer. What settings are you using.
@Olivier-C
@Olivier-C 3 ай бұрын
its basically the factory settings for Esun PLA+, didn't change much
@themastercoder
@themastercoder 3 ай бұрын
Do you think it is possible to modify the project to allow printing on the A1 mini?
@derelictfpv
@derelictfpv 3 ай бұрын
You can scale it down but I'm not sure how a plane smaller than this will fly?
@themastercoder
@themastercoder 3 ай бұрын
@@derelictfpv The only parts won't fit on the plate are the aileron (fits when printed horizontally) and wing 2. Maybe @Olivier-C has some clever idea on splitting these in two parts 🤔
@terracoon9882
@terracoon9882 3 ай бұрын
@@themastercoder You can split those ailerons and wings in 2 parts yourself in the slicer if you want. Just glue them together! The ailerons are quite tall to be printed in one go anyway in my opinion.
3 Dolphins
12:46
Olivier FPV
Рет қаралды 1,9 М.
Ultra Slow Mo Propeller Smoke Vortex - The Slow Mo Guys @tested
14:36
The Slow Mo Guys
Рет қаралды 477 М.
😜 #aminkavitaminka #aminokka #аминкавитаминка
00:14
Аминка Витаминка
Рет қаралды 2,3 МЛН
ПРЯМОЙ ЭФИР. Золотой мяч France Football 2024
4:41:06
小蚂蚁会选到什么呢!#火影忍者 #佐助 #家庭
00:47
火影忍者一家
Рет қаралды 126 МЛН
$192 Micro Long Range Build - 4 inch budget long range fpv drone
20:48
TESTING INSANELY STRANGE FIREWORKS…
54:31
CodyBPyrotechnics
Рет қаралды 7 МЛН
100 Hours of FPV Simulator vs. First Real Life Flight
8:59
andyescapes
Рет қаралды 317 М.
$44 - BREAK THE LONG RANGE BARRIER - NOMAD ELRS
15:50
UAVfutures
Рет қаралды 5 М.
Stiletto light weight, gimbaled O3, and radars
27:21
Olivier FPV
Рет қаралды 3,2 М.