Scotsman Prodigy Manual Purge and Clean Cycle

[@EdHernandez-pr7mz]

I don't know if you'll get this but I trying to help a friend fix it. It had a solid number too. I cleaned all the parts and did things like several things I saw that you had talked about and now it's flashing and it won't start. Also the sanitizer yellow light is on and staying on

[@ketchup4486]

What is the mixure of your descaling solution???

[@atouchofa.d.d.5852]

The Scotsman's I work on you'll be scrubbing the whole cycle or more manually...you need to clean the thickness sensor and water bath sensor as well. Never see this shown. Soak them in your cleaning solution/delimer

[@atouchofa.d.d.5852]

Also remove the water diffuser on top of the evaporator. Always filled with calcium and worse.

[@gabrielvillalvazo3337]

What happens if for accident u pour the cleaner and descales on the ice tub

[@shawntramble1822]

Very helpful, thank you for doing this.

[@stevenlougee7460]

Great instructions but out of 54 ice machines only 3 yellow lights reset after cleaning.

[@rap4]

Hello. I have a Scotsman C0322 machine that has a damaged compressor. The current compressor model aka9438zxd works in a temperature range -20ºC to +10Cº... However, this compressor is not available in Brazil... Can I replace one that works in the temperature range -40ºC to -10ºC?

[@jwells5535]

New maintenance tech here. Excuse my ignorance in advance... Does the ice need to be emptied before the cleaning process?

[@jeffbjenk]

I’m cleaning one now and I emptied all the ice out because the some of the sanitizing solution spills on to the ice while cleaning. But u can flatten the ice out with the scoop and place a plastic trash bag on top to catch any chemical solution from landing on the ice too if u don’t want to take all the ice out

[@donnaduvall8185]

Yes you have to empty all the ice

[@kara_monster]

How do you reset a b530s model? It doesn't have the blue button.

[@davejohnsonnola2758]

Good tip on waiting before adding your descale solution. I've dumped more than a few ounces thru the purge cycle too soon!!

[@anthonypapa8676]

When you start the clean cycle the sump will empty and fill three times. On the last empty the add light on the display will come on it's telling you to add the descaler. The system will add the extra water until the sensor senses its full and will run clean cycle

[@amorobert0303]

The scotsman works but no ice making

[@nufelmohamed2158]

What u ad liquid for cleaning

[@marioballard8550]

On The CO322 If The Reservoir Is Not Emptying Out After The Purge/ Cleaning What Reason Could That Be ?

[@skilledblack4175]

Pump?

[@tweety85v]

Can someone tell me where sw1 switch is located. On c0530ma

[@Pichi1844]

If the circulate water pump stop in / on freeze cycle for a few seconds..... what is the problem ????

[@sandeepsekhon735]

i have a similar issue. i think its its the control board because power comes straight from the board. and the board doesn't show any error codes.

[@Chris_Goulet]

That's normal. The service manual calls it "anti-slush".

[@partsfe]

Impressed by the Scotsman Prodigy's manual purge and clean cycle! We provide genuine Scotsman Cleaning products.

[@donnaduvall8185]

I need a video on error codes and how to fix them. Anyone have one like that. As soon as I clear 1 another one pops up. stressed out, help

[@romandowebb8927]

I changed the ice thinner sensor on mine and now the full bin light won't go off and it won't make ice anymore should I get a new machine

[@BartSimpson-nr1dy]

You forgot the instructions on eliminating the amber light

[@seanspring2292]

Amber light won’t clear something not adding up between the purge and clean, I don’t know about these instructions

[@Konrow]

Question, my machine after the first press of the clean button flashes both C and the yellow sanitize light, but after some time, both turn solid and a second Clean button press does nothing. Looks like this model, but perhaps it is different. Any idea what I'm doing wrong?

[@bigal724]

Pat Anthony....check you manual because your functions may be different if not the same model

[@atouchofa.d.d.5852]

Need to be patient. Second press of C make it flush system with water

[@yamahondazuki95]

Great video man thank you, new sub 👍

[@williamcronin908]

Why do i keep getting code 8.

[@BartSimpson-nr1dy]

Because you have a short freeze cycle

[@anthonypapa8676]

I like the bottle of water / sanitizer

[@safeelsiddiqui1237]

Sir I have scotman EC106 easy - fit machine It has a problem it's not making ice and after 5 minute Top Hi low cond light blinking and compressor off

[@yoyofd]

Safeel Siddiqui 123 just guessing with what you gave us but did you checked your fan motor , is the pump Running?

[@sonnynguyen8012]

Great video. Thank you

[@heribertoastacio5087]

My machine don't make ice ,the sanitizer light is on

[@nedmead6346]

Nothing about sanitizing

[@JesusAdriano-lc1ps]

Español

[@russn4933]

This guy talks a lot without really informing.

[@Vishal512]

Io9