DTF Hack: Unbelievable Sublimation Tips That Will "Blow Your Mind!

[@YouCanTotallyMakeThat]

Have you tried the DTF Hack?

[@UpTillDawnCrafting]

Not yet! I'm saving up for that Sawgrass 💰💰

[@YouCanTotallyMakeThat]

@@UpTillDawnCrafting Sending positive vibes to your Sawgrass savings fund 💰💰

[@April-rs8gz]

I have all the supplies but still haven’t tried it yet!

[@YouCanTotallyMakeThat]

@@April-rs8gz You will love it and be hooked once you do

[@jackie-dbdstitchart4969]

No, I dont have room for another printer. For now i am using the DTV.

[@masterlee178]

Yes Crystal I Would Like To See You Do The DTF Sublimation Hack On A Black T-Shirt,Thanks!

[@yurathablake9649]

today I was was wanted to sublimate on a stretched canvas from Walmart. I used my griddle to set the ink powder on the DTF film. While my griddle was still hot at 358 degrees I taped the picture to the canvas and turned it upside down on the griddle and wieghed it down for 40 secs. the results was fabulous. When it cooled I pulled off the DTF sheet and the print was perfect.

[@YouCanTotallyMakeThat]

That is awesome 👏 I need to try this thank you for sharing

[@MakingwithMarilyn]

I'm happy to see you back on CrystalAnn😀 I was watching you here back three to four years ago. You have had an amazing journey!!!

[@YouCanTotallyMakeThat]

Thank you so much ❤️ 😀

[@DesignBundles]

You're a rockstar CrystalAnn! We can't wait to watch the premier.

[@YouCanTotallyMakeThat]

Thank you! Yay see you tomorrow ❤

[@MaryBeth1972]

I just found your personal channel -- seen you on the DB channel before. You were under another video I was watching this afternoon and I wanted to see what you had for the DTF on regular printer ink. Glad to be here!! ♥

[@leoniepreece1784]

Hi, Crystal Ann. 15:49 I am from Cambridge New Zealand .you for letting me be with you. I am very entertained 😊❤

[@YouCanTotallyMakeThat]

Happy to hear that Thank you for watching

[@JasmineMitchell]

Welcome back! YT just suggested your channel to me but I’ve been watching you on DB foreverrrrr now!

[@YouCanTotallyMakeThat]

Thank you so much I'm so glad you found me here ❤️

[@EmmaC553]

So many useful information！Wonderful Video CrystalAnn!

[@YouCanTotallyMakeThat]

So glad you like it thank you so much ❤️

[@AndrewDiaz]

Another thing I found online about DTF powders is: It is recommended to always use proper protection, including gloves, eye protection, and the proper mask or breathing apparatus when working with DTF powders, as they can become airborne in the coating process. Businesses should not risk inhalation of the powder or extended skin exposure. Additionally, make sure that excess powder does not spread and contaminate other items during the powdering process.

[@YouCanTotallyMakeThat]

It’s just like using embossing power for scrapbooking and cards ❤️ always work in a well ventilated area

[@markiestephens8741]

I wondered about this. My cats were in my office when I was doing this and I noticed when I poured, some powder hung in the air for a second or was left on my table, which they walk on. Not taking chances after this! PPE , cats closed off from coming in & thorough clean-up! Thank you for sharing!

[@Mandy34841]

Love love love your videos, sooo much info and way better than other videos where you do the hacks tutorials and show the results all in one video rather than stretching over 2 or 3 videos. Thank you you’re awesome!!

[@bestlifechanges]

Thanks for your wonderful hacks! You make everything so easy to understand! Glad you're back again!

[@masterlee178]

Every Video I've Watch From You I Get Something From It,Thanks A Lot Young Lady!

[@YouCanTotallyMakeThat]

I'm so glad to hear that ❤️

[@tinatillman2814]

Hi, I just jumped over from the Design Bundles youtube page. I just bought dtf powder, blanks and even a swingaway heat press. Now I need to learn how to use them! Thank you for the great tutorials!

[@TamiT3]

I have watched you for so long! When I have trouble or in a rut I can always turn you on and watch to be inspired! I'm so thankful for you! I was a design bundles member for about a year. I just couldn't afford a monthly payment and pay for designs. I miss it so much. So many great designs! I personally think your site has the best images etc. I encourage anyone who can to join. I love canva as well! You are a great instructor.

[@YouCanTotallyMakeThat]

Thank you so much this means so much ❤️

[@kjhagey8176]

That's why you check out the Mega bundles!!!! So much for so little.❤

[@Schellinz3]

I am a DB member but it irritates me. It always says, you don't have that type of membership! But I have hundreds of dollars on my account! 😣

[@Shelly35able]

Hi Chrystal! So exciting to see you again.

[@YouCanTotallyMakeThat]

Hey there! Thank you so much

[@adntigger71015]

I coat "twice", once a few times back and forth sideways (horizontally), and once a few times up and down (vertically). This has really helped me not have any missed spots.

[@YouCanTotallyMakeThat]

❤️ thanks for sharing 😀

[@Princess_karen]

I am 67 years old and just found your channel. I just bought a printer, heat press and sublimation supplies. I will be adding these items to my order. My granddaughter and are going to try and start a home business. Thank you for these wonderful hacks.

[@pixelbat]

This video is really irresponsible by not using any PPE. You should use some latex or nitrile gloves when touching the powder, and a dust/painters mask, and goggles. The fine particulates are dangerous when airborne, and if you breath them in, congrats, you now have plastic in your body forever. The powder also off gases when heating up. She has no fume extraction at all. Those VOCs are in the air, not safe to be breathing for long periods of time. Look up Brother Earnest if you want to know more about the dangers of dtf powder. Sadly, he is currently battling cancer that has been confirmed to be caused by years of being exposed to the dtf powder and not using safety measures. He showed his endoscope video and he had powder caked on his esophagus. Not trying to scare you, just be safe.

[@EB.80]

@@pixelbat What are you talking about? She has a silent vent system in her craft area. And as she told you the DTF powder that she is using is made for low vent areas

[@pixelbat]

@@EB.80 like 99% of dtf powders being used are marketed as TPU, which just means thermoplastic urethane, it's fine in it's sold cured state. What they don't tell you is it's made from a polyester resin, which when heated up can release small amounts of styrene monomer which is not safe to breathe, especially over a long period of time. If she is using a ventilation system it won't help since you need to extract at the source, and I didn't see a fume extractor there. They literally make fume extractors specific to dtf printing now. And the powder is even more dangerous in it's airborne particle state, not gas. When you're coating your transfer and moving the powder around, some of it gets kicked up. This is why you need a dust mask. If you breathe the powder in as a particulate that is micro plastic that will never leave your body. Can choose to be ignorant, or be safe. Up to you 🤷‍♀️

[@reneenelson7089]

Only new you from design bundles and somehow found this channel and trying to find your blog for starting your business, glad you're back

[@YouCanTotallyMakeThat]

Yay! glad you found me and thank you

[@lavernecalhountalkstheteao2765]

Wow Wow wow !!!!! thank you for being so detailed with how to create an offset and the Dark color DTF hack lmbo!!!! Im dancing with excitement

[@YouCanTotallyMakeThat]

You are so welcome! 🤗 Glad you liked it

[@UpTillDawnCrafting]

Loving that you're back! Can't wait to watch and learn with you!

[@YouCanTotallyMakeThat]

Thank you so much for your support! I'm so excited to be back 🎉❤

[@MsTes777]

I’ve been around but wasn’t sure if when I got in DB if ur was your original now I know what happened! 😂. Welcome back! #loveyocraft

[@YouCanTotallyMakeThat]

Thank you so much! so glad your here

[@Kai0nTheMoon]

This channel is wonderful. I stumbled onto it while searching for sublimation videos because I am going to try to restart a clothing business I had started back in 2008 but had to scrap for various reasons. Back then the sublimation printer was brand new and super expensive and I didn't know you couldn't use it on 100% cotton and I had already bought hundreds of blank cotton shirts and..... just a whole mess. But seeing all these cool hacks and what not, plus the fair pricing of materials, it all seems possible again. I love your printing tips and your energy, and I feel like you and that entire room smell like cotton candy lol. Keep up the good work!

[@YouCanTotallyMakeThat]

Thank you so much. I'm so happy to hear you're getting your business going again I wish you nothing but success. happy crafting and I love the cotton candy made me lol

[@AgataPawlak]

Omg can’t wait! So glad you are back Crystal ❤️

[@YouCanTotallyMakeThat]

Thank you so much Agata! I'm so excited to be back ❤

[@UshasRides]

I tried a wash and tumble dry test of sublimation DTF on white cotton... I noticed that 30C wash inside out was absolutely fine - no issues. However a tumble dry even on a low setting left the print dry, and cracking. So I think I'll add "wash inside out with similar colours - max 30C - Hang dry only - do not tumble dry" - Would be great to see what results you get with washing and drying :)

[@sassykins13]

Definitely need to see how it holds up after washing several times.

[@gati2017]

Yaaaay so happy you are back! Looking forward to it!

[@YouCanTotallyMakeThat]

Thank you so much Gati! 🎉❤

[@HitTheRoadTenerife]

So happy to see you back Crystal! So looking forward to this woohooo 🎉

[@YouCanTotallyMakeThat]

Yay!! Thank you so much ❤ Loving your channel as well

[@redw.2452]

I really like u you are a breath of fresh air especially with the social media platform having so much crazy content on them u make my day so thank you

[@YouCanTotallyMakeThat]

Awww thank you so much

[@marilynperez-martinez6769]

I was subscribed to you but didn't really watch. Then I saw you more on DB & fell in 💕 with your content so I'm just following you back to your channel & actually watching this time.

[@YouCanTotallyMakeThat]

Sweet thank you so much Marilyn for your support ❤️

[@lisabrown2113]

Hey Crystal Ann loved you on Design Bundles channel glad I found you again!

[@YouCanTotallyMakeThat]

Yay! Thank you! so glad you found me ❤️ So thankful your here

[@mariaharlen4377]

Hi! I am from SC. Glad that you are back, because I am so confused about DTF hacks and need more information on what printer to purchase in order to complete the DTF hack. I really want to print larger images.

[@YouCanTotallyMakeThat]

I highly recommend sublimation for the DTF hack for the best results! I love the DTF hack lots more video to come

[@Dee_B23]

Will be watching this one! Thank you CrystalAnn!!!

[@YouCanTotallyMakeThat]

Thank you so much Dee ❤

[@vikki92411]

I tried using the hot plate for drying the adhesive and it works so well! Thank you😊

[@YouCanTotallyMakeThat]

Yay! so happy to hear this

[@prptink]

Yaayy Crystal ❤glad you’re back. Yes I’ve been both waiting for you to come back but I also love watching you on design bundles 😊 another amazing tutorial as always. Stay blessed love 🥰

[@YouCanTotallyMakeThat]

Thank you so much for your support :)

[@masterlee178]

I Really Like What Your Doing Keep Up The Good Work Crystal Your Really Showing Me A Lot!

[@YouCanTotallyMakeThat]

Thank you so much! 😊 I appreciate this

[@brittanydechert4332]

Ohhh I’m so excited! 🎉❤

[@YouCanTotallyMakeThat]

Yay!! Me to Brittany hope to see you tomorrow ❤

[@mcnamaramomma]

Hey! So glad you're back! Been waiting 😂

[@YouCanTotallyMakeThat]

Thank you so much ❤️ I appreciate you 😁

[@debihunt4659]

So happy to see you back Crystal ❤

[@YouCanTotallyMakeThat]

Thank you so much Debi ❤️ it feels good to be back

[@JackilynChristine]

I was just watching several of your videos yesterday so I’m happy to see this notification today

[@YouCanTotallyMakeThat]

Yay!! Thank you for watching I truly appreciate it ❤️

[@robineubank9402]

Happy to see you here a well❤❤❤

[@YouCanTotallyMakeThat]

Thank you for your support ❤️

[@monachavarria4514]

So glad you are back.

[@YouCanTotallyMakeThat]

Me to Mona :)

[@cpr9860]

Hi there, I just found you, and WOW 🤩 I’m loving everything you say! Thank you so much, I’ll keep listening.

[@suekropik796]

CrystaAnn, I have watched all of your videos multiple times. I love the way you explain things. I will be following you on both pages. Thanks for all you do!!

[@YouCanTotallyMakeThat]

Thank you so much I appreciate all your support ❤

[@markellecaldwell9236]

so glad you are back

[@YouCanTotallyMakeThat]

Thank you so much 😊 ❤️

[@JColt]

Hi! Please, can you help me? Can I use an old print or does it need to be fresh in order to apply the powder? Thank you!

[@YouCanTotallyMakeThat]

It needs to be fresh while the ink is wet

[@maryannclayson9223]

Yay so happy to see you back on your channel❤️

[@YouCanTotallyMakeThat]

Thank you MaryAnn ❤️

[@ddeweypink]

Can you tell me the times and temps for curing and pressing using htvront heat press, I love your videos…..

[@YouCanTotallyMakeThat]

cure at 385 press at 300F for 20 seconds Thank you so much

[@arlenepeternella2902]

Griddle hack was awesome. I tried it. Thank you very much Crystal.

[@YouCanTotallyMakeThat]

Right? I love it and your so welcome glad I could help 😃

[@donnaf422]

I came from Design Bundles. I WAS missing you but I didn't know where to find you until I recognized you at the Silhouette new machine announcement this week! You looked great!! I was missing your sweatshirt so it took me a while to figure out where I knew you from. Hey, I'm old...I knew I should know you BUT... 🙂

[@YouCanTotallyMakeThat]

Yay!! So glad you found me 😀❤️

[@hennyncok31]

Ive tried this over a dozen times and i got this to work great on light colors but with black on a cut an offset on white HTV im still getting a smug look on my designs and idk why...its soo frustration. Thank you for all your videos it does help a lot of us newbies.

[@YouCanTotallyMakeThat]

You're so welcome thank you for your support. I think with the HTV thats comes along with with I to have a slight bleed or blurred edges not 100% crisp I wonder if we used another substrate print setting so it prints less ink ? I need to test this more

[@michelezipke3102]

Thank you so much! I followed your instructions and my shirt is better than I imagined!

[@YouCanTotallyMakeThat]

Great job! So happy to hear this ❤️

[@grannytruck2307]

watched you on the design bundles stubbled onto this video so you will be going into my favorites

[@YouCanTotallyMakeThat]

Yay! so happy to hear this thank you so much

[@nickimarch5205]

Good Morning Crystal. Getting ready to do the sublimation on a black apron using the faux screen print ink bleach spot. 🤞🏻

[@YouCanTotallyMakeThat]

Good morning ☀️ that’s awesome happy crafting ❤️

[@JerseyCreations]

I love this hack! Ordering everythinf i need now. How many washes does this take before cracking or pealing off or getting dingy looking.

[@YouCanTotallyMakeThat]

Yay!! your going to love it I have had shirts with over 20 plus washes with no issues still

[@daniellesteward7861]

Hello from Terrell TX. Ordered my griddle Dtf paper and powder!!! Can’t wait to try it!!!!

[@YouCanTotallyMakeThat]

Yay I’m so excited lots more fun DTF hacks coming soon ❤️

[@RayOrsini]

Thanks for the great video. I rewatched a few times but can't find if you gave a temp to use for curing on the griddle and sublimation oven. Do you have those available?

[@adelaidanilo3362]

What Printer settings would I use if I have an Epson 7720. Should I use High Quality Paper, High Quality, High Speed, etc...? What do you recommend or what does anyone recommend I use. Thank you

[@YouCanTotallyMakeThat]

Try these settings kzbin.info/www/bejne/pn_UemVnmLdraLc

[@RosesCreations224]

So I would not meet the Mayte sublimation HTV for black? Only white HTV? Thank you so much I appreciate you🎉

[@YouCanTotallyMakeThat]

Yes white HTV 😀

[@Sike0726]

Crystal thanks for the videos what I like about you is that your honest and straight to the point! Looking forward to more videos. Thank you for all you do.

[@YouCanTotallyMakeThat]

Thank you so much for this ❤️🥰 Thank you for your support

[@jessicahale7264]

I’ve been watching you on design bundles and this page was on my recommended page! Subscribed

[@YouCanTotallyMakeThat]

Yay!! so glad you found me thank you for the sub 💜

[@cindymangum3100]

Using the griddle hack is it necessary to have it up to 385 degrees to cure the ink or is it sufficient to watch to see if it fully changes colors at a lower temperature? I find that at 385 it burns at about 20 seconds.

[@YouCanTotallyMakeThat]

yes can do this at a lower temp it just takes longer I have tested this

[@74sleen]

Thank you for all the great videos!!! ❤️❤️

[@YouCanTotallyMakeThat]

Thanks for watching!

[@albertamyers3594]

When you printed on the dtf film what setting did you use for printing the design

[@YouCanTotallyMakeThat]

For my sawgrass its polyester and truepix classic for the paper on vivid color settings

[@mlovelace7223]

Hi Crystal I am new to this sublimation tshirt making hack, so I have a question? on the sublimation design space, if we buy a a sublimation design. do we need a sublimation printer or can we use the hack that you should us. 🙃🤨

[@Sophisticatedwt]

Will this work on any HTV vinyl

[@lindalowery6153]

this has been very educational. thank you, Crystal

[@YouCanTotallyMakeThat]

Thank you so much Linda so happy to hear that

[@soniacastro7944]

I love to watch you. Sonetine you got to fast for me,, but you explain pretty well. I need a little help. I need how to do the mirrored from my laptop when I want to print it in my inkjet printer. My laptop is an Asuss brand and my printer is a hp. Please help

[@YouCanTotallyMakeThat]

I will show this in tomorrows video and if you need to slow down my videos you can on the bottom right hand of the video click on the gear to Lower the speed

[@tracyhubbard4733]

Hi, love the hack! Does this hack work with ceramic mugs, too?

[@raisingnana]

Great to see you Crystal! You've taught me so much- Ty for your tutorials!

[@YouCanTotallyMakeThat]

Thank you so happy to hear this ❤️ your so welcome Thank you for watching 😁

[@carolhall19]

My first time watching you. Love it! Awesome video!

[@YouCanTotallyMakeThat]

Thanks for watching! So glad your here

[@kennywatzke1416]

Great video. Can I use my current Sublimation ink printer or do I have to use DTF ink in to do this?

[@YouCanTotallyMakeThat]

Yes, absolutely use your current printer

[@kennywatzke1416]

Thanks @@YouCanTotallyMakeThat

[@kellymong5265]

Just ordered the powder and paper you use. So excited!!!!

[@YouCanTotallyMakeThat]

Yay! Hope you like it! let me know how it goes :)

[@kellymong5265]

Paper arrived Sat, powder should be here today. 😄

[@nicolefragale2070]

Missed seeing you!! So glad your back!!

[@desirees89]

Hello! What if I just have a Cricut press and no griddle? Could I heat it with that some how?

[@YouCanTotallyMakeThat]

Yes you can flip it upside down and use just be super careful and cover the platen with parchment paper

[@kelenmartins1455]

I tried my 1st dtf hack a few days ago on a dark cotton shirt over a white htv vinyl. I wasn’t happy with the results. The end product came out grainy. I did heat up the print after I coated it on the griddle for 60 seconds on 385 if I remember well the temp. I basically wrote down what you had used on another project (pencil). Do you have any recommendations of how to fix this issue. I will try it again on some scraps but any help would be appreciated. TIA

[@YouCanTotallyMakeThat]

I think what we need is pigment ink I did not know they make all pigment inkjet printers

[@bonafidekreationz]

What temp do you put your griddle on? BTW good video

[@YouCanTotallyMakeThat]

Thank you its at 385F

[@JudyStrickland-c7e]

Im new to ths and I can understand your directions thank you

[@YouCanTotallyMakeThat]

So happy to hear this Judy - happy crafting

[@rondasheive4280]

If you have a 9 x 9 easy press can you still use it since it is not big enough for the design and you will have to do twice. Thank you

[@YouCanTotallyMakeThat]

yes you can and your welcome

[@designsbydawn976]

Tfs all your hacks, CrystalAnn! I clicked on the link for the DTF paper but it's different from the 9ne you show.❤

[@YouCanTotallyMakeThat]

I will look into this sometimes the seller does that or if I can't find the original anymore I share another one I recommend

[@pennybarr]

I followed all the instructions and purchased everything that you recommended. Part of my design lifted off. What did I do wrong?

[@YouCanTotallyMakeThat]

Did you peel cold? if you did add more pressure

[@belyndamcmullen5583]

CrystalAnn Thank you for all of your videos, I tried using my Epson 2760 and the DTF Film would not pick up the film no matter the way I tried it. So what did I do but buy a sawgrass 500 printer, set it up today and printed the image and it came out beautiful!!! I am so excited to continue making my projects. Thanks again!

[@YouCanTotallyMakeThat]

YAY!! That is so exciting congratulations on the sawgrass your going to love it Happy Crafting

[@christinacady2802]

Yes came from design bundles love watching you

[@YouCanTotallyMakeThat]

Yay!! so glad your here ❤️

[@Jemmyjo]

This was all a lot of great information! I love my Sawgrass Printer and I learned several new things from you today. I very much enjoy the way you do your videos and look forward to watching more. I did find you on Design Bundles.

[@YouCanTotallyMakeThat]

Yay! so glad your here and your have a sawgrass printer stay tuned there a big updates coming to sawgrass next week eeeekkk also I have a fun sublimation video with 3 projects next week

[@Jemmyjo]

@@YouCanTotallyMakeThat Oh! I am so excited! I am already thinking of replacing my Sawgrass 500 for the SG 1000, for the size!

[@YouCanTotallyMakeThat]

@@Jemmyjo 👏 Yay!! it will be worth the investment and last you years to come imagine all the possibilities woot woot

[@juliegayson7947]

Thank you so much. Great information. Would this be good on glass and wood? Thanks

[@whitneybeverley2132]

Love watching you. Can't wait for more content😊 your ideas, tips and tricks have been so helpful.😋❣️

[@YouCanTotallyMakeThat]

So happy you find them helpful ❤️😀

[@Beautygal117]

So I put the exactly more less temperature to cure the dtf and it curled like completely. Don't understand since I put the same amount of temperature you did😢 I also put parchment paper underneath

[@YouCanTotallyMakeThat]

I bet your griddle is getting hotter then it says someone else had this same issue

[@AnnetteStearman]

So I do tie dye on higher cotton or natural fiber fabric, do you think this would work on them?

[@bonniescreativeplace]

When I mirror my image on the subpaper. I also mirror my image on the dtf transfer film. They do not match up after I weed it. I'm not sure what i'm doing wrong? The only way I can get it work is not Marine. The easy subly and then Peeling the design off the plastice and and adding it to the shirt. I hope you understand what I'm saying. Any help would be great.

[@YouCanTotallyMakeThat]

I know exactly what you're talking about I have done this before. if you're talking about sublimation paper and HTV vinyl yes mirror both. as for DTF film mirror but you don't need to print on paper just the DTF film

[@aliciagorden4882]

I just ordered the griddle will let you know how this turn out. Thank you so much❤

[@YouCanTotallyMakeThat]

Hope you enjoy

[@Sophisticatedwt]

Crystal, will this work on any white htv ?

[@auchlisa2000]

Would you recommend sublimating with the sublimation Htv hack or the Dtf hack?

[@YouCanTotallyMakeThat]

DTF hack

[@TobbaAlberts]

I'm a newbie from Iceland 😁 Already ordered my sub supplies and watched a lot of videos but have not done a project yet 🫣 This video is amazing and I'm sure I will get the dtf powder and film to try these hacks later on ❤️ Thank you so much for your great tips 😘

[@YouCanTotallyMakeThat]

Yay! 😀 so happy to hear this happy crafting you got this

[@janet5666]

Hi Crystal, I am new to your channel and I truly love how you do test on these items. Helps us all alot, thank you for your wonderful videos. I think we are all looking for the best alernative to dark shirts. Sure, helps and hey I read on the spray you were using with Dyepress and apparently they came out with a new one that only is one spray bottle without using two sources. It's called Dypress poly T Plus, or I think pro. You might want to check that out. Less work! Lol.

[@kimtaft619]

I didn’t know you had this channel. I just know you from Design Bundles. Excited to watch previous videos.

[@YouCanTotallyMakeThat]

So glad you found me Kim :)

[@dayz2023]

Which printer setting do you use. I have an Epson eco Tank 8550, and my prints are very smeared from up to down. 😢

[@YouCanTotallyMakeThat]

I don't think it will work with an eco tank because its dye ink. I'm seeing lots of issues with this one 🥹

[@dayz2023]

@@YouCanTotallyMakeThat i use subli ink. But i found the Problem after 3 hours. One Tank, the grey one, it is brocken. Now its time to Retoure this printer and get A New one. Tanks for you comment.

[@beverlybogues9608]

When you use the griddle, can you use it for food after

[@YouCanTotallyMakeThat]

I would not I would keep it separate from food just to be safe

[@buddysmith7080]

If you use this process directly on to a shirt (no vinyl) does it feel like sublimation or does it still have a 'hand'? Also can you use this on a dark shirt without using vinyl? Will the colours show up (red, yellow, green etc), or will they not show up similar to sublimating on a dark shirt? If you can, I would love to see this. Excellent video.

[@YouCanTotallyMakeThat]

it feels like a think HTV. you can not do it on dark the colors disappear 🫠 but you can do it on light colors

[@pjcreates]

I never had any success until using a griddle. I notice that the color comes out different on say a gray tee. Is that normal. I appreciate you videos.

[@YouCanTotallyMakeThat]

yay! I'm so glad it worked out for you ❤️ you are so welcome

[@ashleygray3730]

Hi CrystalAnn, which ink do you use in the Sawgrass? The UHD or chromablast?

[@YouCanTotallyMakeThat]

I use the UHD ❤️

[@sharonm6172]

I converted my Epson ecotank to sublimation. Will the colors wash out when I use this printer?

[@YouCanTotallyMakeThat]

as long as its sublimation ink your good to go