How to Scrap Motors Fast for Awesome Profit

In this video I show how to quickly scrap a copper motor by cutting it in half with a machete. With this method it makes it faster and cleaner to scrap a motor to recover the copper.
I recovered $18.56 in copper and another $4 from all the other materials and I did this all in around 10 minutes.
Here is a video showing 4 different ways to scrap copper transformers.
• How to Scrap Transformers
If you enjoyed this video please like/share/leave a comment. If you would like to learn more about scrapping please consider subscribing to my channel. You can use this link here and it will take you directly to my channel homepage where you can click the subscribe button and check out my other videos. / @scrapitall200
Hi, my name is James and I'm a hobby scrapper who loves taking things apart to separate the various metal to make some extra money!
In my video I hope to show you how to scrap things, I also hope to show you the fun in scrapping different items that we all can find easily.
Come join me on my scrapping adventures where I share how I scrap items for easy money.
Please have a look at my scrapping videos and I hope you'll consider subscribing to my channel.
If you'd like to mail me anything you can email at [e-mail] and I'll give you my mailing address.
Thank you for stopping by and God bless y'all.
Become a member for less than a dollar a month. Your financial support will go to shop supplies, tools and anything else I need to scrap metals and make these videos.
I thank you very much for all of your support!
/ @scrapitall200
#makingmoney #hobby #copper #brass #motor #scrapping #fun #money #junk #scrapmetal #recycle #steel #aluminum #wire #scrapper #howto

[@scrapitall200]

I greatly apologize for not including the values of the metals, I was fairly new to making videos and I failed at this video 😂 I’m sorry! The copper came out to $18.56 and the rest of the materials came out around $4 and I scrapped that motor in about 10 minutes. Thank you for watching!

[@democracyforall]

Well, I would have bought that faulty motor from you for 15 dollars, so did it worth doing all that job for extra few dollars?? And also you will have to take it to the shop to sell it so the amount of time plus travel will bring down your profit to 15 dollars thus if you would sell this kind of motors to someone like me without doing a minute job on it for 15 dollars is much better however, I live in UK so need to open my business in USA I suppose...

[@scrapitall200]

@@democracyforall I had a lot of fun scrapping that motor and to me, I can’t put a price on fun. Thank you for watching.

[@democracyforall]

@@scrapitall200 OK I do understand that too, I Cut TREES and grass in my forests houses in eastren EU and I feel like i just made a billion Euroes so yes I do understand that...

[@scrapitall200]

@@democracyforall nice! Which part of Europe?

[@democracyforall]

@@scrapitall200 Lithuania

[@mwanttruth4602]

I like when you thank God for what you do i m in metal fabrication for 43 years and i thank God too for everything i accomplish i wouldn t do it without him

[@scrapitall200]

Amen to that! God bless you and thank you for watching!

[@benhumphregys3087]

Amen in the name of Jesus Christ 🙏🙏🙏🙏❤️❤️❤️❤️

[@amgeezy_2709]

I find annoying and pitifully sad

[@kevansmotherman1201]

Shared myths are everywhere!

[@jjdajune]

God damn it, these cult people I tell ya. Yikes!!!

[@gregrussell7704]

I feel the same way about scrapping. The most frustrating yet rewarding and relaxing hobby.

[@scrapitall200]

Absolutely! Thank you for watching.

[@__Ryan_]

Just subscribed. I’m an electrician/ life safety technician and I have scrapped copper wire and motors for 20 years. Mostly wire because it’s just really easy. I don’t strip the #12 THHN but I take the jacket off romex and 14-2 FLRP wire. The 500 MCM I always strip because it’s easy and worth the extra money at the scrap yard. Cool video man. Have a good weekend.

[@scrapitall200]

Thank you so much for subscribing, I appreciate that. I still haven’t found any 500 mcm, but that stuff looks sweet to strip. Thank you again and have a great day!

[@WhatDoify]

I don't know what is more impressive: the scrap value or the absolute unit of a machete.

[@scrapitall200]

I’m going to say the machete lol. Thank you for watching.

[@Horzzo]

Holy hell, I thought it was a joke when he put it on the motor but then he sliced through it like a watermelon. WOW

[@paulmitchell2857]

Amen. I love that you give thanks to God. It's very refreshing to see on KZbin. Thank you

[@scrapitall200]

You’re welcome! I’m so happy you enjoyed the prayer. Thank you for watching!

[@simonjones7785]

quick tip for you from a fellow scrapper with electric motors if you find something brushless / aka digital motors /aka induction drive motors often found in dyson cleaners power wheelchairs/ mobility scooters as well these motors are double wound twice as much copper as a normal motor

[@scrapitall200]

I have found some of those and they can be great. I appreciate your comment and for watching.

[@raulsanchez8307]

Thanx for the tip!!!

[@coryj1811]

Much appreciated for adjusting the volume when you used the grinder. That's a rare thing but never goes unnoticed. 👏 I don't have a machete but I do have the blade from a push mower I scrapped out.

[@scrapitall200]

You are very welcome, I know it can be really loud, especially for those wearing earbuds. I’ve been thinking about trying a mower blade, been looking for the right one to try. Thank you for watching and for your comment.

[@Amy_McFarland]

I like the mower blade idea but you may find that the metal is too thick to go through. The plates are pretty tight with little to no give to accommodate the thickness of the mower blade.

[@coryj1811]

​@Amy_McFarland the thickness wasn't really a problem, aslong as it's sharpened before use each time. The issue I did run into though is the slight curve it has. So it never went down straight/even which was a pain in the butt. But now I have "the proper" tools for the job so I don't have to struggle... as much 😂

[@bonnieclyde3615]

I used to find tons of those motors on roofs all the time back when I was cleaning grease exhaust systems. I always took them home with me to scrap but I was never able to get the copper windings out like you did. I found 1 one time that was on a hospital roof that weighed probably 50 lbs. Needless to say that was good payday. Lol And before anyone says i was stealing them, I wasn't. They were all bad and left behind by lazy contractors that didn't want to carry a heavy motor down a ladder after they replaced them. So they left them there. Thanks for the helpful content. Just subscribed bc of your prayer. All glory to our loving God! Amen

[@scrapitall200]

I believe you, lots of people can’t be bothered carrying those heavy motors and they just abandon them. Thank you so much and God bless you! God is great!

[@2000sborton]

I have never seen that trick with the machete before. It truly surprised me. I didn't realize that the metal was that soft. Thank you for teaching this old dog a new trick.

[@scrapitall200]

I was really surprised the first time myself, it works so well. Thank you for watching

[@davidmay2294]

​@@scrapitall200so what type of metal is it that you split with machete?

[@scrapitall200]

@@davidmay2294 it’s copper!

[@davidmay2294]

@@scrapitall200 I ment the silver outer metal holding the copper windings. Lead? Or really copper?

[@scrapitall200]

@@davidmay2294 those are layers of steel holding all the copper together. So the machete goes in between the layers so it’s just copper that’s getting cut.

[@diamondmetalworks13]

Dang. I wish I could have showed this to my Grandpa. He was scrapping motors into 93. He never cut them in half and he would cut off the “curled” part and made drifts to pound out the inside part. Your way is so much faster and easy. Thank you for sharing.

[@scrapitall200]

Wow that’s really cool! Thank you for watching.

[@johnafagerquist8235]

I've got about 25 motors, from 1/4 hp to 10 hp, but I don't have a machete. I'm going to look for a substitute, post haste! That was the fastest motor process I've seen. Thank you for the video. I'm not dreading processing the motors any more!

[@scrapitall200]

I love my machete so much and by cutting the stator in half, it also makes it easier to pull the copper out. Thank you for watching.

[@PhantomOfThePsy-Opera]

Lawn mower blade

[@johnafagerquist8235]

@@PhantomOfThePsy-Opera Great idea! I have a million of them hanging around. 👍

[@electric8668]

Harbor Freight has plenty of machetes.

[@MadLadCustoms]

Use an SDS with a chisel attachment, hammer off the ends with it and you'll be able to pull out the copper as well!

[@thehappyscrappy5681]

In all my years I’ve scrapped never seen it done with a machete that’s awesome must try it .. god bless and thank you for the videos

[@scrapitall200]

It’s such an awesome way to do it. Works on transformers too. God bless and thank you for watching.

[@thehappyscrappy5681]

@@scrapitall200 was ganna say would work awesome on transformers to def ganna have to try it cos I normally do the cut one end and bash the copper through and that’s noisy takes for ever and you get worn out quick where this looks actually quite fun.. I am only fairly new to your channel but I have followed and will continue to watch

[@scrapitall200]

Thank you, I appreciate it. A hatchet also works really well on transformers.

[@dustinmurray7080]

Instead of cutting the windings in half, then pulling them out, I find it easier to cut the loops on one end with a set of bolt cutters, then pry them out the other end. Works better on some than others, the ones with a ton of shalliac seem to be a little more finicky.

[@scrapitall200]

Interesting method, I’ll have to get a pair a bolt cutters and give that a try. Thank you for watching.

[@mattyal9347]

By far this is the most efficient way to extract the copper windings from a stator. There is no wire dust to sweep up. In fact. Debris is a minimal.

[@scrapitall200]

Thank you! I definitely don’t like all the dust, and plus no breathing in that dangerous dust. Thank you for watching.

[@rodolfocamacho5258]

I love the method you break down the motor. I'm going to buy a machete, large vice and large screwdriver. I've started my Hobby of scrapping cause it really is fun for me. Taking apart anything that has copper is very therapeutic for myself. Thank you for all your amazing videos my friend and thank you for praying my friend. Keep pushing your videos cause here you have a Christian friend. God bless my friend.

[@scrapitall200]

Thank you so much, your comment means a lot to me! Thank you and God bless you too, my new friend!

[@rodolfocamacho5258]

@scrapitall200 always brother.

[@scrapitall200]

@@rodolfocamacho5258 so happy to have you here!

[@elitecystuning]

U won’t make nothing now adays Scrapping used to be the easy lazy way to make big money but not no more ..

[@igorpotocnik7231]

Here in Europe the only people who have fun scrapping metals (especially copper) are the gypsies. And btw they are quite outspoken christians.

[@nightscrapperuk13]

That was a brilliant break down from start to finish and very well explained my scrapping friend, you got a good amount of copper from that moter god bless my friend

[@scrapitall200]

I was really happy with how much copper I recovered. Thanks for watching my friend and God bless you too!

[@shazuurakrixxis2036]

He is the Bob Ross of scraping, lol

[@scrapitall200]

I think you’re the second one to tell me that lol Thank you for watching

[@lowpulse8729]

Get yer ‘fro in order and some bob ross background music

[@justaservant-5888]

Never took one apart that easy but always willing to learn.ill get back with the results

[@scrapitall200]

Definitely let me know how it went for you. Thank you for watching.

[@kircolebangz509]

My machete literally split in half length wise after about 10 min of giving it some much needed forplay with a 3lb hand sledge

[@scrapitall200]

@@kircolebangz509 wow! That’s the first time I’ve heard of that happening! Was it already damaged? New or older?

[@aznative_]

​@@kircolebangz509harbor freight?

[@santosakowski9846]

That was a genius way to cut the motor in half! So simple and yet, I would have never thought of that! When I saw that machete, I thought: "NO WAY!" It worked great.

[@scrapitall200]

It works so good! Thank you for watching, I appreciate it.

[@scrapperbrad]

I just bought a machete for cutting open electric motors and transformers based on your videos. Thanks for posting another great video!

[@scrapitall200]

Awesome bud, let me know how it works for you! Thank you, I appreciate it.

[@willpanter209]

You can tell it’s your first time doing this😂 very efficient. Appreciate the video and inside to speed up my work thank you !!!

[@scrapitall200]

You’re welcome and thank you for watching

[@Oldgrumpyvet67]

I was struggling to get a motor opened earlier then I remembered this method and it worked it was slicker than snot on marble lol thank you I hope you had an awesome day today 😊

[@scrapitall200]

That is so awesome, thank you for sharing this. Thank you, you too my friend.

[@Supercheeseburger666]

You're lucky the copper came out that easy. I've scrapped motors where there was so much lacquer that I had to soak it in Vinegar to loosen it up a bit before using a prybar! Thanks for sharing.

[@scrapitall200]

I think having it in two pieces help, but I know what you mean, I’ve had some that were a real bear. I’ve never heard of soaking them in vinegar before, I’ll have have to give that a try, thanks!

[@saltyzero1295]

Thank you very much for the shout out! God bless!

[@scrapitall200]

You’re welcome buddy and God bless you too!

[@scrappingonthefly77]

Nice teardown!! Great tutorial. Thanks for sharing!!

[@scrapitall200]

Thank you buddy, thanks for stopping by and giving a watch.

[@scrappingonthefly77]

@@scrapitall200 always!!

[@bobobulinski7121]

That’s a pretty slick way to quickly get those opened up! Will definitely be doing them this way from now on.

[@scrapitall200]

Awesome! It really does work great. On transformers too. Thank you for watching.

[@joserosado8633]

I like your Contant very educational and professional. Thank you for sharing with us. Stay blessed.

[@scrapitall200]

Thank you very much, I appreciate that a lot! Thank you for watching and God bless you.

[@user-yz3oe1il9d]

I like your attitude towards scraping it's a fun way to make some spare money from home , and the good Lord opens up all these avenues for us to do so.

[@scrapitall200]

Amen to that! Thank you for watching and God bless you!

[@bradkroboth5490]

I haul scrap part time and do my teardown work at night, little side hustle to cover some expenses and learn how different things operate, I'd rather makle $$ while relaxing instead of passing it up, microscrapping saves $$ by not driving around looking for items but maximizing your return per each

[@Bamamike223]

Holy Scrap! I now have a new hobby. Thank you.

[@scrapitall200]

It’s a great hobby and I love it. Thank you so much for watching.

[@hardrock6r]

Thanks for leaving the prayer in the video. Sincerely. Machete! I can't believe I never thought of that. I use a machete for everything. Im a small scale farmer and my wife can attest to the fact that I usually have a machete in my hand and a couple dogs in tow. When we hike trails in the state park I carry my machete🤣. I use one in the garden to coppice or to harvest vegetables. I use it to slice those vegetables when Im feeding them to the pigs or other livestock. I find a hundred other uses all the time. Its basically my 5 in 1. So before my little love letter to machetes gets even weirder I'll just say thanks for the great idea!

[@scrapitall200]

😂 I enjoyed reading about your love of your machete. It’s an awesome tool. I’m so happy you enjoyed the prayer, God bless! Thank you for watching.

[@gizmo5586]

This is one of the first jobs I ever had . We didn't scrap ! We rewound ! Cheaper than buying a new one !

[@gizmo5586]

Even an easier way !

[@scrapitall200]

I’ve seen some videos of that being done and it’s pretty cool. Thank you for watching.

[@nachostuff]

That was great yield. I have seen more like 9% average and you were getting closer to 15%. Way to go

[@scrapitall200]

I think this one was the best one yet I’ve done! Came from my local grocery store from one of the refrigerant systems, I think. Thanks for stopping by buddy.

[@ihaulscrap]

WOOOW, that is cool. I've been just tossing motors bc they are usually too hard n time consuming. Definitely going to try this.

[@scrapitall200]

The machete really does make it quick, plus no mess from copper dust from the angle grinder. $22 for all metal and it took me 10 minutes to scrap. Thank you so much for watching.

[@sharonfarris1691]

I am new at scraping. I never thought about cutting it in half. 😂Thanks for the video.

[@sharonfarris1691]

What was the moter off of.

[@scrapitall200]

It works really well and with transformers as well. I got two of these motors from my local grocery store. I believe they were part of their cooler system for where the stocked the beer. Thank you for watching.

[@zerocool7772]

Great video, mate. Good to see your machete is still going strong. I recently watched a great video on a channel called VisconVee and he uses a plough blade cut into the shape of an axe blade with a slight bevel on the edge, worked a treat.

[@scrapitall200]

Thank you so much! Oh wow, that’s cool. I’ll have to check out that channel, thank you.

[@countrysidelife5768]

I just wanted to say thank you too 🙏 You just earned a new subscriber!!! First time that I saw the knife slice method and I loved it AWESOME 👏 Fast💨 Clean 🧽 Easy 😊

[@scrapitall200]

Thank you so very much, I really appreciate it! God bless you!

[@derekhaywood1844]

Sir ; you are awesome. Give God his praise. I love it. Thank you so much for the video. You are a great man.

[@scrapitall200]

You are welcome and God bless you! God is great and I’m nothing without Him! Thank you for watching.

[@ShahKhan-hi7gr]

Nice video good ❤🎉

[@scrapitall200]

Thank you buddy!

[@weaponizedmath4369]

Just did a 1st one myself and certainly did the hard way, thanks for the info

[@scrapitall200]

Thank you for watching. Hope it works well for you.

[@bearspiritjpz]

i loved your closing prayer!

[@scrapitall200]

Oh good! Thank you for watching and God bless you!

[@brandt-heiss]

Wow, so much copper in that little motor. Nice one... Even to cut it with a Machete is so fast. I didnt believe that. Hope i can get one here in my country. So on, keep scrapping. Bye and greetings from Germany brandt-heiss

[@scrapitall200]

I was very pleased with the amount and yes, the machete works wonders. Thank you for watching all the way from Germany!

[@davea5150]

A question for you. I often wonder when I get stand alone floor fans and also pedestal fans. Some of the casings are cast aluminum and some steel . I usually sell them as is. Do you think it's worth taking the copper windings out? Thank you 👍👍

[@scrapitall200]

Those ones are really easy but in my experience they are mostly aluminum windings instead of copper. Thank you for watching.

[@Followerofchrist878]

Watched again. That machete is really nice!

[@scrapitall200]

Thank you! It really is!

[@Followerofchrist878]

@@scrapitall200you’re welcome!

[@chaseanonymous9327]

Great video! The prayer at the end was awesome

[@scrapitall200]

Thank you so much! I’m happy you enjoyed the prayer. God bless!

[@richardchee2454]

God bless you. Love your video. ❤ What a joyful scrapper you are!

[@scrapitall200]

Thank you so much. God bless you and thank you for watching, I appreciate it.

[@user-pi1xo3nk5r]

I work for a university campus and they have motors that range from 5lbs - 500lb+ let alone all the other metals and Cooper piping etc. I think most of the time they just trash it all.

[@scrapitall200]

500 pounds!! Wow! You should ask them if you can have them. Thank you for watching.

[@RS-ls7mm]

Yes, convert an apparently clean motor worth at least $200 into $18 worth of metal. Brilliant plan.

[@scrapitall200]

You really think it still worked?

[@RS-ls7mm]

@@scrapitall200 No, but I have seen enough repair videos and fixed enough of my own to know its generally pretty easy.

[@scrapitall200]

I don’t disagree with that but I live in a small town and no one wanted it even for free so scrap it is.

[@steveherr450]

@@scrapitall200 I agree I get more in than I can resell so most get cut up.

[@scrapitall200]

@@steveherr450 I find it hard to resell items, so many want to lowball on the price and the frustration and time is usually not worth it, but too each their own, right?

[@anthonycolangeli4133]

I totally agree with you. I use the machete method and it seems other scrappers have picked up on your method. I do not like all that dust from the copper when using an angle grinder among other things. God Bless!

[@scrapitall200]

Me too my friend, I really don’t like that dust all over everything, plus it’s really dangerous to breathe in. Yeah I’ve been amazed at how popular the machete has become. Thank you for watching and God bless you too!

[@gregz4249]

Could you fashion a machete out of old lawn mower blade?

[@scrapitall200]

@@gregz4249 yes, I’ve heard of others doing that. I haven’t made one myself yet.

[@007josiah]

You're like the Bob Ross of scrapping.

[@scrapitall200]

Thank you, that’s one of the nicest comments I’ve ever got. Thank you for watching.

[@steveherr450]

I do it almost the same way. Instead of an angle grinder I use my plasma cutter to open the casing. Then I use similar pliers usually 1 of my 2 bigger ones and instead of using the screwdriver I just flip my pliers upside down after getting it loose and roll the plier neck on the steel edge for leverage or on the vice sticking the one end under the copper like you did the screwdriver and out pops the copper usually pretty easy. Doesn't pop out then I grab my bigger pliers. my yard wants the strings removed too.

[@scrapitall200]

I should try using my pliers just like you described, thank you for the tip! Thank you for watching and leaving a comment, I appreciate it.

[@BushDogScrapper]

That machete of yours is some tough it went though that faster the grinding the cap pretty much with like you say no copper dust wasted! CheeRs ScrapItAll ♻️🤘🏻

[@scrapitall200]

I love my machete. Yeah I hate the dust, plus it’s dangerous to breathe in. Thanks for watching my friend!

[@darvinreed2314]

I owned a scrap yard back in the 80s the good Ole air chisel was my best friend

[@scrapitall200]

Absolutely! I’d use one if I had one lol Thank you for watching.

[@golabrecykling]

Thats a new method for me. I'm trying to do my best with it recently. 😊 Have a good day bro 😊

[@scrapitall200]

I love the machete, been using it for quite awhile now. Thank you, you too brother.

[@JohnJoe-pf8of]

Great video

[@scrapitall200]

Thank you so much

[@JohnJoe-pf8of]

You're welcome

[@RailfanRowan]

Dude, this is my first video of yours!! Looking into doing this myself. Thanks for the prayer at the end, brother! In Jesus' name, AMEN!

[@scrapitall200]

Amen! Thank you so much for watching, I appreciate it. God bless you, brother!

[@jayjaynella4539]

I enjoyed this and learn something new after doing this for 40 years.

[@scrapitall200]

That’s great! Thank you so much for watching.

[@robertordewald8678]

You had some good ideas, Thanks new subscriber, Bob from Virginia USA

[@scrapitall200]

Thank you, Bob, I appreciate that!

[@dalemills8052]

That motor is as clean as a new one...makes for good "clean" copper too. Great informative video and God bless you.

[@scrapitall200]

Thank you buddy, I appreciate it. God bless you too!

[@dyer2cycle]

Yes, good clean copper, but still #2 copper, not #1, because it is so "fine"..most yards use the diameter or a pencil lead as the cutoff diameter between #1 and #2 copper..so, the shiny doesn't really help you.

[@redrum2612]

Wow. That's a first. Crazy awesome! Thanks for sharing. 🤝

[@scrapitall200]

Thank you so much I appreciate it. Just subbed to your channel.

[@redrum2612]

@@scrapitall200 You're welcome! I appreciate that. My kinda Scrapper. "It's not about the money"

[@scrapitall200]

You’re welcome! The money is nice, but I just love being in my shop working and listening to music and taking stuff apart.

[@redrum2612]

@@scrapitall200 Absolutely. It's great therapy.

[@scrapitall200]

It really is!

[@user-yl6yy2yj3n]

Thats a new and improved method for me Thanks 😊

[@scrapitall200]

You’re welcome. I love the machete method. I think I’ve done 20 of them so far and also lots of small transformers. Thank you for watching.

[@rossbrumby1957]

On behalf of 90% of the people of earth, thanks for taking the time to add the metric weights. It's nice to finally see a copper scrapper who, after all the effort of doing a video and setting up a channel, actually has a vice mounted on a bench! I've seen videos where they have no vice, have one sitting on the floor not bolted to anything, and one with a vice bolted to a short piece of 9" diameter tree trunk sitting on the shed floor! They just can't be bothered setting things up to make work easy. Your machete seems to work, but I dunno about bashing the back side of it- the wrong tool for the job normally gets mangled. I just cut one end off with the 1mm thin disc and pin punch it out as I don't frequently get motors. Planning a pnuematic claw puller after seeing a homemade hydraulic puller that strips motors of wire in 15 seconds.

[@scrapitall200]

I don’t understand either why some don’t properly mount their vise. I’ve been using the machete for quite some time and it’s holding up really well. I like it because my shop is a shelter logic tent and I don’t use the angle grinder inside of fear the hot metal dust or sparks will put holes in my tent. I also like it, because when the stator is in two pieces the copper comes out much easier, especially with the ones that are incredibly tight. That would be a really cool thing to have, I’ve seen videos of those and they are sweet. Thank you for watching. P.S. in my newer videos I add more information for users of the metric system along with the values of the metals in Euros, British pounds, Canadian dollars and Australian dollars.

[@rossbrumby1957]

​@@scrapitall200I finally got around to trying a nice sharp bench axe on a longer stator- it cut through easy enough, but the copper wedged into the gaps and was a bugger to punch out. It may also have been an especially tight wound motor too though. I dont own a machete or would've tried that- i realise the axe being thicker may not give as good a cut.

[@scrapitall200]

@@rossbrumby1957 I tried a hatchet on a stator and had the same experience. I’m thinking it’s the thickness and not as sharp as a machete that makes that happen. That’s a bummer it didn’t work for you.

[@Followerofchrist878]

Wow, that was cool using the machete

[@scrapitall200]

It works so well. No dusty mess and super quick.

[@Followerofchrist878]

I agree!

[@Followerofchrist878]

@@scrapitall200thank you for the video. God bless you

[@scrapitall200]

You’re welcome. Thank you for watching. God bless you too.

[@Followerofchrist878]

Hope you had a Merry Christmas!

[@davidhaughton961]

HI there! I subscribed because I like your prayer. God bless you.

[@scrapitall200]

Thank you so much! That’s really wonderful and God bless you too!

[@vanman724]

Great use of the machete! Works perfect.

[@scrapitall200]

It sure does! Thank you for watching

[@ScrapMan69]

great video my friend always good to tear them big motor compressor apart to get all that copper!!

[@scrapitall200]

Thank you! Yeah I love these big motors, so much good copper! Thanks for stopping by.

[@ScrapMan69]

@@scrapitall200 your welcome buddy hope you have a good day!

[@scrapitall200]

Thank you and you too have a wonderful day!

[@jimfurr81]

Videos on the process please: Where do you get your scrap to start with. Right now copper is worth approx. $3.59 per pound. How much of that would the scrap dealer give YOU per pound?

[@scrapitall200]

I got this motor from the grocery store maintenance guy. I also let as many people I know I scrap so I’ll get texts or calls saying they have a pile ready. Street scrapping and dumpster diving. Some scrappers are getting roughly $3.50 a pound per copper. Some are getting much less, all depends where you live.

[@ariesmariano4592]

Awesome ideas

[@scrapitall200]

Thank you, I appreciate it!

[@crddrones3457]

Just subscribe !! bad ass way to save that money. God bless take care stay safe. And of course I rang the bell as well.

[@scrapitall200]

Thank you so very much, I appreciate that and God bless you too.

[@ScrappingIrish]

well done sir nice teardown, must remember never to pee you off after seeing your machete lol, nearly 3kg of copper lot better than i taught

[@scrapitall200]

Thank you buddy, I appreciate it. Well thankfully I’m a peaceful guy 😂 It was better than I thought, was so much fun scrapping. Thanks for watching, I appreciate it.

[@off-gridsurvivalmike8120]

Wow that was amazing how you chopped that motor in half with a machete. I actually thought you were joking at first. I have worked with metal for 40 years and would never have thought of that wild idea. Great video new subscriber here.

[@scrapitall200]

Thank you, I was amazed myself when I first gave it a try. Thank you for watching and subscribing. I just subbed to your channel.

[@Bob_Loblaw]

​@scrapitall200 what a lovely exchange. 😊

[@scrapitall200]

@@Bob_Loblaw thank you! Thank you for watching.

[@PNWGarden-ci8dg]

I thought the same thing. Great video!! This is inspiring

[@scrapitall200]

@@PNWGarden-ci8dg glad you enjoyed it. Thank you for watching.

[@user-sj8uq5sk7p]

Great content !

[@scrapitall200]

Thank you so much!

[@bigcountryscrapper6885]

Great video bro....I love doing these motors

[@scrapitall200]

So much fun and a lot of copper!

[@BahaaFahmy-ch2lg]

A thumbs up for thanking God

[@scrapitall200]

Amen! Thank you for watching and God bless.

[@Followerofchrist878]

Amen!

[@scrapitall200]

God bless you both!

[@Zappy1210]

Gave it a try on a 60hp motor a few years ago. Man has to know his limitations 😂. Spent a full Saturday getting the copper out, was about 65 lbs. So roughly $200 for a full days work, very hard work. Its a shame it isn't easier because I have access to about twenty or so 30hp to 350hp motors a year.

[@scrapitall200]

Those huge motors are definitely a lot tougher but for me as a hobby scrapper, it’s definitely worth it. Wish I had a few 350hp motors lol. Thank you for watching.

[@MsSugercrisp]

@@scrapitall200 $27 Dollar worth of copper you got for that one motor now I say it took you about ahhh 45 min to 1 hour to do all that work then you need to bring to scrap yard that will take you other say 30 min so you need to bring a lot just pay for time and say so in a day if you had 8 that come up to $216.00 now $16 will for new took and gas and lunch so you make 200.00 a day now that all good the only problem you need endless motor now that had part and to be that kind of motor or better was fun to watch you do that was the motor any good? because it would be worth way more then $27 I say about used $60 or double that $120 new

[@Breadbored.]

​@@MsSugercrispThat's something scappers overlook all the time. I've seen so much perfectly good stuff get chopped up and sold for scrap at 1/10 the price they could have gotten for it. People will even buy broken stuff if it's repairable or if you can repair it yourself, even better.

[@allenrussell6135]

​@@Breadbored.I owned a small engine shop for 12 years and made friends with a dozen scrappers. I said anything with a gas engine I'll take for more than scrap. The equipment they found blew my mind. Old Dr brush hogs , snowblowers , rare horizontal engines from the 70s. It was an amazing business relationship. Thanks to covid and a bad business partner with addiction issues I had to close. I definitely miss it, it's an in demand dying industry. The amount of money you can make in April and may alone is unbelievable. (That's just from mowers, mainly old riders)

[@Breadbored.]

@@allenrussell6135 My favorite time of year. I used to love driving around with my father looking for treasure. One time I got a $2000 commercial laser printer on my way home from work. Nothing wrong with it at all, it just needed a new toner cartridge. God bless the rich people that don't know what anything is worth, lol.

[@paulrodriguez4879]

"I'm just gonna pound on this shaft" 😂 thats what she's said

[@scrapitall200]

Thank you for watching

[@power1961able]

These are helpful ideas

[@scrapitall200]

Awesome! Thank you for watching.

[@jrb6969]

Agreed! The machete was impressive and a really great time saving tip. I ha e one I found buried and now I know exactly what to do with it! Again, impressive friend!😮

[@scrapitall200]

Thank you! First time I tried the machete I was quite surprised at how well it works. Thank you for watching, I appreciate it.

[@albertgallegos9938]

Loved the prayer!!! ❤❤❤🙏🙏🙏✝️✝️✝️

[@scrapitall200]

Awesome! God bless you and thank you so much for watching.

[@stevenbryant9097]

I've been a dumpster diver/ scrapper for over 33 years and I've broken down exactly 113 motors exactly like this one and I can tell you that they have never weighed 6 pounds. 2 to 5 pounds maybe 😮.

[@scrapitall200]

I’ve had quite a few that were right around 6 pounds of copper, guess I’ve just been lucky. Thank you for watching.

[@BigBuckGetter]

You saw the scales. Are you saying he's a liar??

[@stevenbryant9097]

@@BigBuckGetter yup

[@shanghunter7697]

@@stevenbryant9097 You've been hating and angry for many decades now ! I have 41 yrs experience and his weight WAS right on. STOP the hating and jealousy, stop using those two wasted emotions ! Now the real anger WILL show.......GO !!

[@georgeesquivel2517]

That’s old saying comes into play somebody’s scrap is somebody’s gold 😎👍

[@scrapitall200]

I’ve never heard that before! Thank you for watching.

[@scrapnjunk81]

That some nice copper. Great video

[@scrapitall200]

Awesome amount of copper! Thank you for watching.

[@jimmoravec1326]

Excellent video, Especially thanking Jesus 👍

[@scrapitall200]

Thank you so much. I love Jesus with all my heart and I’m nothing without Him. God bless!

[@jeffpowell2864]

Motor could have been rebuilt and sold for a lot more money. Most time all that's wrong is a stuck or worn out brushes. If it spins freely, has continuity in the fields, with no shorts to the housing = good sellable motor for the price of a pair of brushes

[@scrapitall200]

I’ll keep that in mind, thanks.

[@AndersAylward]

People always say this stuff as if there's always people wanting to buy an old motor out there

[@scrapitall200]

@@AndersAylward in my area motors are being offered for free and no one takes them. I’d rather have fun scrapping a motor than try and find that one person willing to buy it.

[@jeffpowell2864]

@@scrapitall200 not criticizing the scrapping. The point being person having broken motor repaired instead of replacing it. The original equipment needed a moter like this.

[@johneckert1365]

As a salvage yard owner, it also bothers me when good stuff gets destroyed.

[@maritimescrapper]

Still lovin the machette hack! AWESOME video as usual!!!

[@scrapitall200]

I love my machete so much lol.

[@sarahcarlson993]

Definitely a good video

[@scrapitall200]

Thank you so much, I really appreciate that!

[@robertceccopieri4150]

The problem is that 90 percent of motors today don't have copper windings they have aluminum

[@scrapitall200]

I have really good luck with motors being copper, except for washer and dryers, they always seem to be aluminum. Thank you for watching.

[@eljokerjce]

Just tried my luck with my first microwave everything in there was aluminum (copper coated) even the stuff in the capacitor

[@scrapitall200]

@@eljokerjce wow, that is awful. I scrapped a General Electric microwave the other day and everything was copper, I was pleasantly surprised, then I scrapped another one and it was all aluminum. I have great luck with electric motors though. Thank you for watching.

[@MissCanadian]

Nice chunk of copper in that motor

[@scrapitall200]

Wish I had a hundred of them lol. Thanks for stopping by friend.

[@MissCanadian]

@@scrapitall200 I have couple that size and bigger

[@scrapitall200]

@@MissCanadian that is awesome! And with your prices that’ll be a good payday.

[@ohiograssman1564]

I used to cut up and break down every piece of hvac equipment- furnaces etc. Fun times

[@scrapitall200]

I sure do have fun scrapping. Thank you for watching.

[@JW212manhattan]

You make that look so easy

[@scrapitall200]

It’s not hard at all, but I have done a lot of motors lol. Thank you for watching.

[@wannabescrapper72]

I had to wipe the drool off my chin when I saw the first loaf of copper

[@scrapitall200]

😂 man I wish I had loads of these motors. Thanks for watching my friend.

[@fletcherjacobs3688]

You wanna drool. I have been going ham in an abandoned factory day and night all summer. Just dropped off 35 lbs. Yesterday 85 lbs day before. Endless Co ppr.

[@scrapitall200]

@@fletcherjacobs3688 sounds awesome!

[@fletcherjacobs3688]

@@scrapitall200 yeah unfortunately demolition starts next week so I gotta finish up and move one. Also mad friends w a stray cat so I gotta find her a home. If ya wanna see the place my friend flys drones. His name is Apachefpv. He calls this place the hanger. Enjoy lmk what ya think

[@chuckcook2468]

​😂@@fletcherjacobs3688Lynn

[@piecesofpete5921]

🤙🤙👍

[@scrapitall200]

Thanks buddy!

[@EelingStudios]

Great! I learnt something there as I would have used an angle grinder where you used the machete that made perfect sense! Keep up the good work 🙂

[@scrapitall200]

I love using the machete, works so well, plus no mess from copper dust lol. Thank you for watching.

[@CruiserMac]

That was a nice big chunky motor !

[@scrapitall200]

I love it lol Thanks for watching buddy

[@chrisao1987]

About $25 worth of copper.

[@scrapitall200]

Depending on the price. At the time of making this video the average price was around $3 a pound. Some folks are getting close to $3.50 a pound right now. Thank you for watching.

[@charm2348]

And doing good for the planet.

[@johnzimmerman6516]

Bright copper wire is roughly $3 per lb as of 10-11-23. You just spent a half hour taking this apart for $18. Now factor in the time and gas you spent looking for the motor and then cashing in the scrap. Almost a waste of time.

[@scrapitall200]

All metal is worth $22 and it took me 10 minute to scrap. I didn’t have to drive around for it. I tell people I scrap and this was brought to my shop.

[@ardoario4990]

Maybe a waste of time for you since you may have a great paying job, maybe you are just plain rich. No everyone is a blessed or lucky as you, others have to hustle and make money in an honest way. Also, for some people is a hobby and the plus side is they are still making extra cash. For others that are either doing this kind of work/hobby or even watching this video maybe doing it for learning and it is a good stress reliever…you are now resolving your problems, some of them emotional or financial and you are making a little of that extra cash to patch those issues. Nothing wrong with that. Thank you for the video.

[@gcode3653]

that wouldn't be the one or thing you'd turn in that day. It'd be well worth it.

[@johnduffy6546]

That was pretty informative

[@scrapitall200]

Thank you! I appreciate you watching.

[@waltw8230]

I do hvac so I scrap copper a lot, never thought about breaking down the motors, I’m not sure that’s worth my time but interesting video learned something new, maybe when copper goes to 5$ per pound lol

[@scrapitall200]

I do it as a hobby but if you have different things you’d rather spend your time doing I can see it not being worth it for you. I’d love it if copper got that high lol. Thank you for watching.

[@dyer2cycle]

Yeah, me too...I have been getting market 25 cents-35 cents lb. for electric motors..I just am skeptical that it is worth the extra time to crack them apart and remove the copper...and, most of the yards will accept the motors from the outside condensers with the fan still attached...adds to the weight(not the squirrel cage motors still in the housing though). I sell the sealed units intact for the same reason, not worth the time involved for the return to take them apart...I do get everything I can out of the hvac stuff, though, I clip out all the #2 INS wire, take out all the relays and anything else that has a small amount of copper, brass, or aluminum in it and toss it in the Breakage bin..usually 21 cents/lb...I shear the ends off the copper/alumn. radiators, shear them off with the sawzall blade right flush with the steel ends, and you can easily and quickly pick the copper out of the ends for #2 copper. If you are sloppy with it and leave a bunch of aluminum on the ends, you are usually better off selling the radiator ends as is, as the copper is very difficult to remove that way. For me, it's a balancing act of return versus investment of time, as my time is worth something, too. And when enough volume of a given material is saved up for a run, I call around 3-4 yards and get prices...seldom does any one yard have have the best prices on everything, so I often take different items to different yards. Just make sure you have saved up enough for your trip. Unfortunately, there are no yards that are extremely close to me, so I have to be strategic about my trips. Another consideration is which yard is pickier or more lenient about grading on a specific material...

[@red2965]

Yes very interesting, the moment you just took apart a $400+ motor to get maybe $40 worth of scrap copper 😢

[@scrapitall200]

Motor was no good though!

[@KoltAura]

Copper right now is about $5/lbs That is about $30. Streel is $0.07/lbs Throw in another $1. You made $31 in 10 minutes. Not making $100k doing that.

[@scrapitall200]

@@KoltAura where you at getting $5 a pound for copper. I never said $100,000

[@elpasoerickp]

That looks like fun

[@scrapitall200]

@@elpasoerickp it’s a lot of fun! Thank you for watching.

[@bryanjason_]

Big money? That’s like $20 worth of Copper. It’s maybe $3.50/lb and you got a little over 6lbs. What am I missing here?

[@scrapitall200]

$22 in 10 minutes of work, not too bad for a hobby.