Scrapping Aluminum Crutches For Extra Value. I scrap these crutches to show you how & some extra value. Thanks For Watching.
Пікірлер: 63
@jessicadavis77462 жыл бұрын
I think its totally worth it to break them down!!! Great job Phil!
@garyjohnston21412 жыл бұрын
Safety glasses, Great 👍 Tip CTH.
@robertbedard29622 жыл бұрын
every crutch is extra money in our pockets great video.
@michaelschuenemann35052 жыл бұрын
So Glad You showed us again - Yes - Stripping and Cleaning will give You much more Money ! Its worth it for sure ! Thanks for another Brilliant Video - loving it ! Cheers from us in Australia !!!!
@mikeparker52002 жыл бұрын
Staying up late editing videos. Thank you. Very informative.
@ashtonsseries69682 жыл бұрын
Its amazing how many people don't know them little clip ends are brass.there definitely worth collecting when you get the amount you get.👍♻️
@nelsonroy50652 жыл бұрын
well, depends how much time he spends trying to salvage a 5¢ piece a brass...... And he spends so much time to salvage insignificant quantities of metal.
@ashtonsseries69682 жыл бұрын
@@nelsonroy5065 if your going to take them out in the first place to get clean aluminium then its not difficult or time consuming to just put them in a pot.and im not telling anyone to do anything totally up to the individual what they do.👍
@fredaelliott7235 Жыл бұрын
Where did you get the scale?
@sharoneaston92152 жыл бұрын
Great video.
@kenord34372 жыл бұрын
My yard took alloy tubing as extruded, wonder if I was just lucky, I say it is worth the effort, thank Phil.
@brendamiller81402 жыл бұрын
Great video, God Bless. ⭐️⭐️⭐️⭐️⭐️💜🤗🥰🙏🙏
@lizmcconnell22682 жыл бұрын
Great video 🍀🍀🍀
@christophebertaux89892 жыл бұрын
Nice video, thanks!
@robertlivingstone39472 жыл бұрын
Very interesting video
@wghead2 жыл бұрын
Good video.
@CanadianTreasureHunter2 жыл бұрын
Thanks!
@markavargosr362 жыл бұрын
the best way to get the push buttons out is to use needle nose pliers. Push in buttons on boath sides reach in hole and pull out. also a good tool for a punch is the axle off of the paint sprayer to use to get into pipes and tubes,
@bergbryce2 жыл бұрын
I have drilled out the rivets on crutches before, they come out quickly. My scrapyard has a 95% clean aluminum category if I don't remove the tiny rivets too, which is nice. Much better price than dirty aluminum.
@CanadianTreasureHunter2 жыл бұрын
These rivets are alloy not steel
@ludovdb49072 жыл бұрын
thanks phil grt belgium
@maggiecousineau18772 жыл бұрын
Definitely added value when you clean them up. It looked so easy even I could do this.
@jamesross3822 жыл бұрын
Hi Phil. Very interesting vid.Enjoyed it. thx
@CanadianTreasureHunter2 жыл бұрын
Thanks 👍
@kluafoz2 жыл бұрын
My yard pays less than shred price for dirty aluminum... I used to keep it separate and take in dirty aluminum. After seeing sooo many pieces of dirty aluminum in the shred pile I just decided to say fuck it and toss all my dirty in the shred pile...
@kluafoz2 жыл бұрын
Also if they're in good shape in my town there's a couple different places to donate used medical equipment for low income people...
@scrappingadventures2902 жыл бұрын
I would definitely do the same, as my yard does not buy dirty aluminum, so I kinda have to 😅👍
@CanadianTreasureHunter2 жыл бұрын
Its worth it if they pay very little
@alialsubaie61552 жыл бұрын
👍
@dalecrary87382 жыл бұрын
I think its worth it. Nice video
@CanadianTreasureHunter2 жыл бұрын
I enjoy scrapping them
@marthashipman90102 жыл бұрын
Interesting.
@josephcormier59742 жыл бұрын
I agree stripping them is better you see them every wear and the wing nut is often cast and don't forget the brass thank you my friend five stars
@ireneingram11742 жыл бұрын
All good x
@muriaticacid70042 жыл бұрын
Thumbs UP
@snoopbob34972 жыл бұрын
a lot of yards in the uk just take then as aliminium as they are without stripping them
@ramblingman89922 жыл бұрын
UK crutches are way different to the ones you have. They have an arm clip at the top. The handle sticks out at 90 degrees from the handle and the whole thing consists of 2 tubes unlike the 3 yours has.
@tomlim44062 жыл бұрын
👍👍👍
@y.lelivelt26192 жыл бұрын
It's more fun for me to see you're struggling with a piece of scrap Phil. And I think for others too.( sorry).Do you have to buy those cruches when you need them in Canada? We can just use them and give them back for the next person. In Holland the things are different.
@CanadianTreasureHunter2 жыл бұрын
I don't know, I find them all the time
@CovidConQuitTheCensorship2 жыл бұрын
@@CanadianTreasureHunter same here in Australia. I thought you would return after use but they are quite often found in the rubbish so maybe not. I tried selling them with no interest. Maybe the hospitals just write them off
@ikessul14292 жыл бұрын
Great video buddy and definitely worth stripping
@viorelchiriac5712 жыл бұрын
Respect for wath you doing Would you mind for scrap mettal prices list ?
@CanadianTreasureHunter2 жыл бұрын
Prices here change all the time & my yard don't advertise prices
@timtenbrinke81302 жыл бұрын
Are the rivets ever aluminum?
@CanadianTreasureHunter2 жыл бұрын
Yes
@markavargosr362 жыл бұрын
make sure all materil is less than 4 foot long, anything over they pay u less money.
@weefreedavielittle2 жыл бұрын
ALOOMINIM LOL .It is Aluminium .. hehe 😉 xx
@weefreedavielittle2 жыл бұрын
Its $ £ lol
@christopherjacobs27462 жыл бұрын
Didn't you say dirty they were $1.24 and clean was $1.40 if that's right you are making 16 cents by cleaning them you aren't doubling your money.
@CanadianTreasureHunter2 жыл бұрын
Its about 40 Cents with our high prices, But most scrap yards pay 10 to 15 Cents only & at one time they where saying put it into the shred, Its not a money maker but depends on what they pay for dirty
@bgaabo32 жыл бұрын
@@CanadianTreasureHunter We only get 9 cents for dirty and $1.15 for clean sheet, but stuff like siding and extrusion is closer to $2 so not horrible
@chrisgoodrich89872 жыл бұрын
To me 40 cents in 5 minutes doesn't make sense but I only get paid 35 cents per clean pound of aluminum
@gang35trevino422 жыл бұрын
Police gang
@nelsonroy50652 жыл бұрын
Why do you always say "brass" twice in a row?
@CovidConQuitTheCensorship2 жыл бұрын
Come on, for a few bucks an hour? Great video btw I personally never waste time cleaning aluminium, it doesn't weigh enough + where I live in Australia, that gain per set would be about 40c. Definitely not worth wasting time on. Time is money
@CanadianTreasureHunter2 жыл бұрын
If they only pay sherd price, Its worth it. I gut the plastic insert off with a cable cutter & can strip very fast
@CovidConQuitTheCensorship2 жыл бұрын
@@CanadianTreasureHunter yeah I'm sure you'd be way faster than I would be. It's always faster too if you clean up a lot of same items at once isn't it? Once you fiddle around figuring out the first one, then you can whip through the rest really fast
@nachostuff2 жыл бұрын
Not really worth the effort for me - it is .30 cents dirty or 45 clean since it is considered sheet. If it was extruded then it would be worth it. Nice info though
@gang35trevino422 жыл бұрын
Scrap metal
@jodikinson57552 жыл бұрын
Honestly Iwould clean them up and donate then there are some that need but can't afford them thats my opinion do you really need that extra money sorry again Donate
@CanadianTreasureHunter2 жыл бұрын
It's easy to say donate, I have a used moldy mattress do you want it? No I wouldn't