SCRATCH BUILD HALF SIZE RC CAUDRON TYPE N - MAIDEN FLIGHT

[@TimHackettAustralia]

I’ve watched RC modeling videos for years and this is my favorite to date. The engine alone is a masterpiece and it runs so reliably. Not too overpowered with a gentle realistic flight

[@devilsoffspring5519]

Is the engine scratch-built or is it a commercially available powerplant?

[@thomashockin4128]

Beautiful craft!! I can see lots of research and care!! Thank you for allowing us to see this!

[@devilsoffspring5519]

Some people's hobbies absolutely blow my mind. Never in a million years would I put the kind of care and effort into a JOB as this guy puts into his hobby. What an awesome project!

[@johnfarr1193]

Wow! A fantastic example of top-class model engineering. I am so happy that it only suffered minimal damage and hope to see it fly again. All best regards.

[@devilsoffspring5519]

The original full-size aircraft got beaten to hell and rebuilt all the time, so why not :)

[@taofledermaus]

What a realistic sounding plane. Great camera work! Did NOT expect the ending!

[@RCScaleAirplanes]

Thank you for your kind comment, Jeff. Non one of us expected this kind of ending, but luckily it "landed" in the cornfield, instead of the hard runway.

[@RCScaleAirplanes]

@freebeerfordworkers ... do you mean the B-25 ( kzbin.info/www/bejne/mnimZ4B_jt1pn5o ) If so. It was damaged in the front, and it has been rebuild this year.

[@RCScaleAirplanes]

@freebeerfordworkers O.K. Thanks for the reply !

[@mikemullay5622]

@@RCScaleAirplanes I am glad the damage wasn't worse than it was. Probably so accurate that the original design flaws of the actual plane were in the model as well. Not a lot of control surface authority. But a beautiful model. Well done.

[@Eatherbreather]

What a glorious machine.

[@stevenflattum156]

So awesome!

[@RCScaleAirplanes]

Thank you! Cheers!

[@devilsoffspring5519]

@@RCScaleAirplanes Lovely work man! Glad there wasn't too much damage. Remember that in RC flying, things like propellers, wings and tail surfaces are considered consumable :)

[@angelreading5098]

Beautiful,flown so well too and that draggy airframe to contend with too,a lack of elevator authority is a nightmare and glad that you can repair to fly again. For those who placed the thumbs down you just dont get it do you ? this is how pioneer aeroplanes flew with wing warping and rotary engines that sent them into a spiral dive.

[@iansummers6945]

Credit to the builder & pilot, beautiful model. Glad you came down on a reasonably soft area and repairable. Great video

[@RCScaleAirplanes]

_Thank you for your kind comment, which I really appreciate._ 😎🤙🏼

[@anibalsonera2376]

That was a great job. Building from scratch, maiden flight is part of the initial test, could fly or crash. The same happened in the old days. Model building and repairing is part of the hobby. Some improvements, and you get that masterpiece of history back in the air.. I build, fly crash, repair. Experimenting is a lot of fun. Hope you get it back soon, because I subscribed!

[@RCScaleAirplanes]

@@anibalsonera2376 *Thank you for your kind comment !!! * Since this model does not exist anywhere else, it was difficult to pinpoint the exact center of gravity. There were also two other factors that unfortunately caused the aircraft to sink quickly. 1. the slow response time of the engine 2 .. the insufficient deflection of the elevator. In the end, it was good that the model landed on the cornfield instead of the hard runway. _The model has been repaired and the necessary corrections were done. It's ready for a re-maiden now._ *thanks for the sub* 🤙😎

[@mattshellback9258]

My son and I literally gasped at the end!!! So glad there was only minimal damage, work of art!

[@paktoysreview8377]

you are a nice hard worker

[@karicoreth161]

the plane in combination with this engine is GREAT !

[@RCScaleAirplanes]

Thank you for your great comment !!!

[@gtssound1]

Amazing and very talented model building. This is what scale modelling is all about. I too did not expect the ending my heart sank...

[@raymond7880]

The most noteworthy is the fact its a rotary engine. That's real authenticity.

[@AndyFromBeaverton]

That much mass spinning always freaks me out. You would have thought a century ago there must have been a more efficient design.

[@voornaam3191]

Na klar. Natüüüüürlich hat er das. What else?!

[@voornaam3191]

@@AndyFromBeaverton Duh! TWO engines, the second one turning the OTHER way. Think in solutions, man. This is the obvious answer: compensate those horrible gyro effects. Too many planes have crashed by leaving the tarmac and destroying an expensive runway light. Why does the world accept those bad properties of airplanes?! Try selling cars that steer crooked, nobody will buy it. And planes? Weird side effects are considered normal. Why?!

[@raymond7880]

@@voornaam3191 the first mass produced aviation engines were of the rotary type.. Clerget, Gnome-Rhone etc.

[@tuberhead]

Don't you mean radial engine?

[@1witheagle]

The looks, the sound, the roll, the flight. MAGNIFICENT!! Such a gentle takeoff. Sad to see it buy rhe farm. But so glad of the minimal damage. Look forward to the maden landing. Hope you will upload that. Great work! It is people like you that make the sport what it is. Thanks for sharing.

[@gergw3141]

Hi, after a long time waiting for different reasons we had perfect conditions for the re-maiden last weekend. I am happy to tell you that I had two perfect flights with perfect landings. 600 g lead in the tail and more elevator solved the problem. Next time I will find somebody to make a short video to let you participate. Regards Gerhard

[@devilsoffspring5519]

Guys like you are unreal man. I could never dream of having anywhere near as much drive and energy for a JOB as you have for your hobby. You blow my mind. Thank you for sharing!

[@billknudson7895]

Well done! What a magnificent build! That engine is a remarkable piece of craftsmanship. The plane sounded like a full-size aircraft. Excellent piloting skills throughout. I’m glad the damage was minimal. Best wishes for many hours of perfect flights!

[@motorv8N]

So graceful. Love the sound and the pilot's scarf flying in the breeze!

[@mreid08]

Amazing model for a scratch build so he really had no idea of its flight characteristics but I'm very happy it's ok and will fly again!!

[@RCScaleAirplanes]

_Thank you for your kind comment !!!_ Since this model does not exist anywhere else, it was difficult to pinpoint the exact center of gravity. There were also two other factors that unfortunately caused the aircraft to sink quickly. 1. the slow response time of the engine 2 .. the insufficient deflection of the elevator. In the end, it was good that the model landed on the cornfield instead of the hard runway.

[@causwayspeedway]

I was thinking the same thing.. Whether you weighted the pilot or used sand bags to half of a pilots weight. Marvelous build you have there.

[@900stx7]

The corn saved it ! We flew over a large suger cane field in Louisiana. A many a plane crashed into the tall cane that survived with minimal damage.

[@keltudabigboss9716]

*ok*

[@devilsoffspring5519]

Wow, this puppy looks like more work than any job I ever had! I'd feel terrible if I crashed it but kudos to those who enjoy this kind of hobby. I would never, ever dream of putting this kind of time and effort into ANY job, never mind a hobby!

[@scottgorman7166]

Oh so very cool. What a beauty! Love the touch with the silk scarf. Man the pilots eyes must have been dried out the the prop wash and flying Buy that guy some goggles.😳

[@RCScaleAirplanes]

Thank you for your kind comment, Scott. The pilot will get goggles for the next flight, in order to hit the runway. 👍😂

[@golamkibria6833]

I agree with you.

[@VintageTechFan]

No worries, they were moisturized by plenty of castor oil from the engine. Of course a side effect were their pants being "moisturized", too.

[@adrianhsieh4276]

Great work that truly belongs in a museum someday...

[@gergw3141]

Thank you. But first it has to fly and fly and fly ......

[@devilsoffspring5519]

REALLY nice model aircraft are for flying, not staring at in a glass case!

[@gotchagoing4905]

An absolutely STUNNING model. And that scale rudder has it's work cut out for it with all that torque with a rotary engine, and a BIG prop. I'm glad the damage was minimal. Excellent build...wow.

[@patriciosilva1969]

Wow! Magnificent example of a working rotary engine (the motor rotates, the crankshaft is fixed to the fuselage structure).

[@RCScaleAirplanes]

Thank you very much!

[@masalumtayaona7386]

very proud my friend, I come from Tanzania.

[@RCScaleAirplanes]

Thank you very much !

[@masalumtayaona7386]

know the pain, how will you help me?

[@charlesmoore3321]

I've never heard a rotary idle down that smooth. Beautiful.

[@HiCapacityMags]

Truly a work of art. Thanks for sharing

[@RCScaleAirplanes]

Thank you for the compliment. Much appreciated !!!

[@michaelbarber2393]

Wow! Not only looks good but sounds right too. Congratulations.

[@michel-dw3vx]

A score out of 10 ; You get a 7 , absolutely well done . The flameout doesn,t make it less distinctive. Great video , the ending was a little bit of a surprise . Thank You

[@RCScaleAirplanes]

Thanks 👍

[@aeromodelisme45]

Bravo ! une belle réalisation, j'adore ce type de modèle et le moteur est magnifique, il a un bruit génial !

[@Pietro_Troschka]

This is wonderful! Great job! I've never seen rotating cilinders before! That's very clever, so the cilinders keep cooler!

[@roadsweeper1]

its actually how the original radials were built and operated in RL, as the engines got progressively larger, radials were further developed to stay stationary and turn the prop instead (no idea why this happened, maybe to do with the torque created by spinning ever increasingly larger engines)

[@Pietro_Troschka]

@@roadsweeper1 thank you! Very interesting, I didn't know that.

[@alejandromascitti541]

the real reason for being rotary is to eliminate the mass of the flywheel of the engine and build a lighter engine. in this case the cylinders will act as flywheel. The problem was created by the gyroscopic forces that made difficult to turn the plane to one side, this is was abandoned later.

[@alejandromascitti541]

@BrianJebe s28490.pcdn.co/wp-content/uploads/2019/05/ECi-370-cutaway.jpg

[@alejandromascitti541]

@BrianJebe check image I sent you will see the flywheel of one of most popular aircraft engine

[@harrowtiger]

Great model, no problems easy fix, just more elevator. Thankyou, excellent video 10/10 from me.

[@americanspirit8932]

What a great airplane very realistic the engine sounds fantastic, and your flying skills are the best. Lots of luck. Keep up the great work. I'm a big fan of vintage aircraft.

[@RCScaleAirplanes]

Thanks a lot for your kind comment. Glad you like it. 🤙😉

[@davidevans8826]

Excellent craftsmanship beautiful flight and no humans were hurt in this flight and everything is replaceable good job man

[@fargknob]

Outstanding craftsmanship.....well done Gerhard......so sorry that she broke.....I know you'll have her rebuilt, good as new.

[@RCScaleAirplanes]

_Thank you for your kind words, Barry. Sure it will fly much better after it is repaired. CG and elevator will be improved._

[@williamnye478]

When that beauty crashed, so did my heart! Glad she wasn't too badly hurt. Great job!

[@RCScaleAirplanes]

Thank you for your kind comment. Much appreciated !!!

[@arnhemseptember2009]

Pretty amazing in every imaginable aspect. Congratulations!!!

[@RCScaleAirplanes]

_Thank you for your kind comment. Much appreciated !!!_

[@silverfunnel6819]

Der Sound, das Aussehen, wie die Echten:-). Toll!

[@RCScaleAirplanes]

Vielen Dank für das Kompliment !!!

[@secularsunshine9036]

*Beautiful job* The flight was very scale like and probably very characteristic of the full-scale plane, I love it.

[@ianschroth6575]

Holy crap! That's a rotary engine! What a jewel that engine and airplane are!! Love it!!

[@thomasschmidt9281]

Geil, einfach nur geil, fliege auch solche Kisten daher weis ich was der Pilot da fühlt

[@RCScaleAirplanes]

Danke für deinen tollen Kommentar. Gerhard hatte Glück, dass die Schäden sehr gering blieben.

[@cristianoribeiro8077]

Beautiful plane, and beautiful flight!

[@RCScaleAirplanes]

Thank you !!!

[@Scairborne66]

I love this build, and share everyone's comments about the beauty of this aircraft. HOWEVER, am I the ONLY one who noticed that he did NOT have his model restrained before starting his engine?? That size propeller would have shaved him into pieces if it rolled forward. Restrain by a rope or have someone stand over the horizontal stab. Never stand in front of an engine without the aircraft restrained.. please!

[@gergw3141]

I fully agree with you, you never should start an engine if the plane it is not restrained. But please take a closer look, of course it is restrained. There is a rope around the tailspur.

[@RCScaleAirplanes]

@@gergw3141 _You have very good eyes_ 👁👁🦅 👍🏻😉 Yes ... the plane was restrained.

[@RCScaleAirplanes]

It was restrained with a rope. I was thinking of mentioning it in the video, but there was too much text already. 😉

[@Scairborne66]

Thank you both for the correction!

[@Teus01]

@@gergw3141 Maybe this year at the Dutch Dawn Patrol Gerhard 😃

[@halroofner4069]

An amazing build. I hope he repairs it soon with better trims. I would love to see it fly again. Great video!

[@RCScaleAirplanes]

Thank you for your kind comment. Yes. The plane is almost rebuilt and the trims and CG will be corrected.

[@ChrisB257]

What a beauty, and a rotary engine too! Thoroughly enjoyed the pre flight and start up - and just terrific to see it in the air. What a sweet take off. Looks as though it flies on just rudder/elevator - and just as I thought it was coming in for a landing it was in the crops. Very concerning but thank goodness it's not too badly damaged. Definite need for much larger elevator throw.

[@Zikatus]

you must be a granny if you enjoy this crap doing circles in the sky

[@bartnuckols6615]

@@Zikatus why don't you go out to your sandbox troll and get off this channel !

[@RCScaleAirplanes]

_Thank you for your kind comment, Chris !!! _ Since this model does not exist anywhere else, it was difficult to find the right setup. There were three factors that unfortunately caused the aircraft to sink quickly. 1. center of gravity (nose heavy) 2. the slow response time of the engine 3. the insufficient deflection of the elevator. In the end, it was good that the model landed on the cornfield instead of the hard runway. _Cheers, Horst_

[@RCScaleAirplanes]

@@bartnuckols6615 there are too many keyboard experts here ... @Zikatus is one of them 👍😂

[@Zikatus]

@@RCScaleAirplanes Yes I am a keyboard expert that's why flying fields are either full of grannies or desolated with less and less people. flying models without performing aerobatics is way too boring to me. sorry.

[@mikemullay5622]

I can't believe I am actually looking at a scale model rotary engine. Amazing. This one sounds like it actually has a throttle, instead of having to "blip" the ignition.

[@gergw3141]

Many thanks. Yes, it has a normal carburator, different to the original rotary engines.

[@ronitsingh85]

there is something magical about a rotary engine, it just looks amazing spinning like that and man this this engine can idle pretty low, there is nothing like something that is this close in appearance, construction and operation to the real thing! Bravo, hats off to you sir! Now I never flown or own an RC plane but do have a good amount of production open rocker engines, single cylinder etc on me and one day I want to build a plane that flies as slow as this powered by an OS FS 60 open rocker which I own 2 of. just lovely to watch this plane floating away like that in the air, you see it all in sort of like slow motion. Just wonderful!

[@ronitsingh85]

Oh Jesus! Did not see that coming!!!! :-( :-( :-( I am sorry, I hope you fix it all up good!

[@suasponte8363]

My hats off to these guys, absolutely remarkable!

[@RCScaleAirplanes]

Thank you for the compliment. Much appreciated !!!

[@vumba1331]

Wonderful efforts on all fronts, engine, building and flying! I think test flying it and finding there was insufficient up elevator control would have been stressful. Thanks for sharing.

[@MasboyRC]

It's look so simple, classic, but fun to fly. Awesome 👍

[@ridebecauseucan1944]

That is just an amazing model aircraft ! Well done !

[@RCScaleAirplanes]

Thank you very much !

[@billseay6399]

Hey Thanks absolutely great video and plane

[@RCScaleAirplanes]

Thanks. Glad you enjoyed it.

[@WALTERCARRIONTORRESValiCT]

Felicitaciones amigos, les deseo éxitos 🏁 Saludos desde Ecuador 🇪🇨

[@RCScaleAirplanes]

Gracias 🤙😎

[@walterbenson5275]

Absolutely wonderful,speechless!!!

[@RCScaleAirplanes]

Thank you for the compliment. Much appreciated !!!

[@Soulmate_1001]

Very realistic demonstration of a top model, great building performance, respect! Video is so realistically... like those magnificent men in their flying machines .... thx Horst, great 👍

[@enedenedubedene4811]

Herrlich!!!! Ist der Sternumlauf auch Eigenbau? Wahnsinn!!!👍👍👍😂😂😂😂 Viele Grüße aus Germany

[@RCScaleAirplanes]

Vielen Dank. Nein ... der Umlaufmotor ist von *Armin De Vries UML300cc 5 Zylinder 4 Takt* ... www.modellmotoren.eu

[@clarencegreen3071]

Great video! Very interesting. Love the sound. Most impressive is the rotary engine and how it responds to the throttle. I'm glad the model was not seriously damaged in the landing. I look forward to the next flight! (NC USA)

[@RCScaleAirplanes]

Thank you very much! Glad you enjoyed the video.

[@dano4572]

BEAUTIFUL NO MATTER WHAT HAPPENS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@drfeelgood3534]

@5:00 close your eyes and think it's a Knuckle Head. Bad Ass build! Sir thank you for sharing brother and Hafa Adai from Guam 🤙🤙

[@motionsic]

What a rare rotary engine beauty - she purrs! Love how you shot the intro with whimsical music. Very cinematic! Great job filming sir!

[@123sheepdip]

Beautiful. Many congratulations and thanks for sharing.

[@RCScaleAirplanes]

Thank you very much!

[@dagunni3201]

Was für ein tolles Modell und super Sound! Viel Glück und Erfolg für den zweiten Flug !

[@RCScaleAirplanes]

_Vielen Dank._ _Der nächste Flug wird bestimmt genauso gut und bestimmt auch mit einer gelungenen Landung._ 😎🤙🏼

[@eggofuhrmann7373]

Grosses Kino - Hut ab ! Der Motor ist der Hammer !!!!

[@RCScaleAirplanes]

_Vielen Dank !!!_

[@ginopunsalan]

Not what I expected. Looked like it flamed out. Beautiful plane. I am glad it is repairable.

[@wenepzoli]

Nice rc video recordings! Thanks sharing! 👍Like 👍

[@RCScaleAirplanes]

Thank you. Glad you enjoyed the video !!!

[@wenepzoli]

@@RCScaleAirplanes Nagyon szívesen! További sikeres videó felvételeket, alkotói munkákat és erõsségeket mindenkinek!

[@RCScaleAirplanes]

@@wenepzoli *_Köszönöm mégegyszer._* 🤙😎

[@wenepzoli]

@@RCScaleAirplanes Nagyon szívesen! További sikeres videó felvételeket alkotói munkát és erőt egésséget mindenkinek! 🌏📸👍🌞👆🎮🥽✈️📸🌏

[@RCScaleAirplanes]

@@wenepzoli Köszönöm a bókot. Jó egészséget neked is.

[@draczka14225]

Fantastic!! Especially the engine!

[@samvelsimonyan7375]

Спасибо !!!Я просто в восторге !!! Это - шедевр !!! Двигатель ...просто слов не нахожу ...БЕЗ СЛОВ !!! Жаль, но я даже не сомневаюсь - после ремонта все будет хорошо !!! Удачи !!!

[@fourmisvolantes]

Beautifull rc plane ,and fantastic motor sound ,very realistic in flight

[@RCScaleAirplanes]

Many thanks!!

[@aloisbraun]

mit Umlaufmotor, wow tolle Umsetzung! Respekt!

[@RCScaleAirplanes]

Vielen Dank Alois. Freut mich, dass dir das Video gefällt.

[@wolfgang4136]

That’s neat. My late father would have loved this👍👍🙏🙏

[@dalimilkoutek6360]

KRÁSA STARÝCH STROJŮ NEMÁ KONKURENCI. A TI ODVÁŽLIVCI CO S NIMI LÉTÁJÍ, NEMAJÍ TAKY KONKURENCI. Děkuji za zážitek. THE BEAUTY OF OLD MACHINES HAS NO COMPETITION. AND THE DAREHOUSES THAT FLY WITH THEM DO NOT HAVE COMPETITION. Thank you for the experience.

[@OnePilot12222]

It sounds like the real thing. I was at a museum and outside the airport hangar they started the engine up of a Caudron plane (it might have been a replica but I think they said it wasn’t). The pilot had to keep the engine going by revving it or putting more throttle in so it wouldn’t turn off. They said the engine was so loud it sounded like gunshots, I reckon it did! as the sound also echoed through the hangar next to it. By the way, great video and great job on the build of this RC airplane. 👍

[@DadsRCHangar]

Loving that radial Engine. 👍🏻

[@RCScaleAirplanes]

me too, but this is a rotary engine

[@DadsRCHangar]

@@RCScaleAirplanes Ah sorry mixed up the type. Still great 👍🏻

[@RCScaleAirplanes]

@@DadsRCHangar never mind. It looks same as a radial, but it rotates 😉🤙🏼

[@JZ-vg6ke]

Awesome video love the sound

[@RCScaleAirplanes]

_Thank you. Glad you enjoyed the video._

[@JZ-vg6ke]

@@RCScaleAirplanes I really do it's awesome keep up the good work

[@RCScaleAirplanes]

@@JZ-vg6ke _I'll do my very best !_ 🤙😎

[@JZ-vg6ke]

@@RCScaleAirplanes Excellent. Thank u and have a great day

[@jdmforever5583]

The sound of that engine is superb👍

[@RCScaleAirplanes]

Indeed it is! Thank you.

[@GulliJ]

If I've not been under hypnosis Ith such beautiful structure model, and engine , I could be worried about elevator unuse at taxying exercise, but I've not imagine the setup is wrong. Forget it, set it, and don't forget to film again for us. It's a so wonderful engine/model that it need to be shown. Well done and thank you Jerome From Frankreich

[@klausanger8121]

Armin de Vries, Gott Vater of Engines

[@modellmotoren]

Danke, ich fühle mich geehrt

[@RCScaleAirplanes]

Ja. Das ist ein außerordentliche schöner Motor !!!

[@6Sally5]

My heart sank when he went down! Thank goodness minimal damage!

[@RCScaleAirplanes]

Yes. It looked very scary but at the end, it wasn't damaged too much. It's repaired already.

[@TODRON]

Que fantástico....lo que me gusta todo esto....llevo 8 meses sin trabajo, imposible hacer nada en España

[@tophatter15]

Simply beautiful!! Well done and done well!! Cheers from Australia 🇦🇺

[@RCScaleAirplanes]

Thank you very much! Glad you enjoyed it. 🤙😎

[@garygullikson6349]

Extra credit for the rotary engine, great to see people try the unusual.

[@Eyes_On_Sky]

Superb model

[@RCScaleAirplanes]

thank you !

[@sassyrc1901]

Beautiful Modele Plane, Beautiful Spirit and Beautiful Hearts・・・♪

[@RCScaleAirplanes]

Thank you very much !!! 😉👍🏻

[@NicosProjects]

Ein echter Umlaufmotor 😍😍😍😍 Davon träume ich, seit ich 1999 Mikael Carlsons Bleriot auf der Hahnweide gesehen habe 🤤🤤🔥👍👍👍👍👍 Senstationell! Vielen Grüße Nico von Nico‘s Projects

[@RCScaleAirplanes]

_Vielen Dank für deinen tollen Kommentar. Freut mich, dass dir das Video gefällt !!!_

[@tomling9310]

Very very nice. I would always recommend to have a low/mid/high set on elevator rates. At least on high will 90-100% travel you could of pulled out. Superb engine, Very unique.

[@RCScaleAirplanes]

Thanks for the tips! Two factors came together which unfortunately could not prevent the rapid descent of the aircraft. 1st. the response time of the engine 2nd. the insufficient deflection of the elevator. In the end, it was good that the model landed in the corn field instead of on the hard landing strip.

[@PfalzD3]

@@RCScaleAirplanes Those Rotaries are a handful, but nothing beats their sound. I'm Glad there was only minimal damage.

[@RCScaleAirplanes]

@@PfalzD3 _Thank you for your kind words._ 👍🏻😉

[@manueljaime1771]

Super avion. Le petit personnage est courageux de voler dans un avion aussi vieux😃

[@RCScaleAirplanes]

Merci pour ton excellent commentaire.

[@paulbrouyere1735]

Congratulations with this very realistic build! Sounds really like a real one and also in flight it looks just like it is real. Luckily the corn field served as an air bag...

[@shelbyseelbach9568]

It is real.

[@florivaldopereirajunior5389]

ótimo vídeo....aeromodelo lindo!!!! agora é só recuperar e voar de novo!!!!!

[@Tomh821]

Ha! Love the music at the end. It will fly another day!

[@modshaman]

Holy CRAP ! That baby is Freekiing NICE !

[@juliocesardureaguilera5180]

No hay palabras para describir esa hermosura

[@francisfreyburger5095]

Magnifique SUPERBE Merci

[@PATLEMENUISIER]

Merci pour cette démonstration félicitation pour la construction. le crache malheureux enlève rien à votre mérite.merci encore pour ce filme. Vielen Dank für diese Demonstration. Herzlichen Glückwunsch zum Bau. Die unglückliche Spucke nimmt dir nichts von deinem Verdienst. Nochmals vielen Dank für diesen Film

[@fabiopiria8530]

Linda replica clássica parabéns belo voo pena que deu uma pane .faz parte do aeromodelismo.forte abraço a todos amantes do aeromodelismo

[@MGB1977Red]

This happened to me too with a big Stampe biplane. The lesson is to always have big high rates available, more than you think you could possibly need. Many times you wind up trimming the nose down for powered flight and then the glide dives beyond pitch control. You can lift the nose up with power but at some point you have to land. If you have time you can move the trim to full up elevator to help with the landing.

[@FloridaFlying]

INCREDIBLE! What an amazing engine and sound!

[@rightaviationchannel5968]

This is very amazing RC aircraft.

[@donaldreach760]

Ausgezeichtnicht! (Excellent) A great trainer. Power :: Altitude while Attitude :: Airspeed.

[@avipatable]

Absolutely stunning model :) Great seeing the ground runs, I bet you have to concentrate on the rudder with that engine and prop. And what an engine, beautiful :) Oh man I wrote my comment before the end! I am glad there wasn't much damage - very lucky that field was full of crops!

[@RCScaleAirplanes]

_Hello Sam. Thank you for your great comment !_ In the end, it was good that the model landed on the cornfield instead of the hard runway. The large propeller had shredded the corn, preventing major damage to the model. _Cheers, Horst_

[@minirccreation7568]

Beauitfull model . Big salute to your job .....🔥🔥🔥🔥

[@RCScaleAirplanes]

Thank you so much 😀

[@Nevertrustalawyer]

I just happy the pilot survived!

[@steves9130]

Wow! Excellent job-Your hard work paid off. Just a minor mishap-no need to worry :)