Scrolling a name

[@medicmark9683]

Just picked up my saw last night can’t wait to get started

[@regularguy6501]

Mark yes on the Olson blades. #5 reverse tooth will do most of your work. Order a gross from the Olson website

[@alisaleh6100]

I enjoyed your video.

[@regularguy6501]

Thanks. Any questions?

[@philipdavison4066sawdust]

Wow that's awesome and so is your moustache mate Thank you from England 👍👌👏

[@regularguy6501]

Thanks. I appreciate that.

[@davidbales8053]

New scroller, very helpful, thanks!!

[@regularguy6501]

Sure. The biggest thing I see is the blades. Olson or flying dutchma

[@davidbales8053]

Thank you sir! Ordered!!

[@Goofy_gober123]

Thanks so much I needed to know how to cut in the hole thank you so much

[@regularguy6501]

Sure. I have some 1/8" wood stencils I can send you if you are interested.

[@Goofy_gober123]

@ sure

[@regularguy6501]

Email me an address to send them to. And, of course, send pics of your projects.

[@Goofy_gober123]

@@regularguy6501 what is your email address

[@regularguy6501]

[e-mail]

[@richardhart7652]

Good video, fantastic moustache

[@regularguy6501]

LMFAO !! Thanks.

[@mikeanderson7493]

Brilliant im saving for a scroll saw cant wait .top tash too boss

[@regularguy6501]

Thanks Mr. Anderson. I try to do the best I can. Just keep at it and never be afraid to add detail.

[@DIYwithlindaMae]

So informative I love how you explained everything thank you so much 😮

[@regularguy6501]

I try to be complete in my descriptions. As always, I am happy to answer any questions.

[@mariofriggieri1629]

Very nice video, I like it.

[@regularguy6501]

Thanks. I will try and do some more.

[@raulaguirre71]

Woao!!! Very quickly! Amazing. Nice job man.

[@regularguy6501]

Thanks. Been doing it for a minute.

[@billsavage22mag]

Nice job! I like the way you keep it short and simple. Liked how you told what type of blades you were using.

[@regularguy6501]

Thank you Mr. Boylan. I've been doing it for so long that it's all muscle memory.

[@regularguy6501]

Thank you Mr. Boylan. I've been doing it for so long it's all muscle memory.

[@Amy_McFarland]

It's a shame you don't do more scrolling videos!

[@regularguy6501]

Ask and you shall receive.

[@Amy_McFarland]

@@regularguy6501 😇👍😇

[@dsigetich]

Thanks for this video. Was clear and to the point. Two things: I wish you had mentioned the size of the blade you were using. And I set up the name I am going to carve in MS Word or Powerpoint, then print that on a full-page sticky label. I then apply blue tape to my wood and stick the label to it. The label + tape then comes off easily after scrolling, and leaves no residue to clean off. The blue tape also adds a little lubrication to the process. This way you have unlimited fonts without cutting and maintaining stencils. Oh. Third thing: I make sure the bottom edge of my project is straight and smooth (table saw here) and place the label about 1/4” from that edge. This leaves a base for the letters to stand on. Ok, fourth thing: sand both sides of the wood before scrolling.

[@regularguy6501]

Good tips. I bought a gross of blades about 20 years ago, I think they were #5. I just got more Olson blades, #9 skiptooth. Not too dond of the skiptooth. They don't last as long

[@yasinros426]

Awesome...can you make more videos like this?

[@regularguy6501]

I try to find the animals although I'm not always successfull. Please watch my previous videos. I have been doing them for 2+ years and have captured many animals on video. Thanks for watching and I value your input. Please continue to comment and steer my channel in the right direction.

[@timewithdee9025]

Nice scrolling there Regular Guy !! 🙋🏽💞☺

[@regularguy6501]

Thanks Time

[@24tothetopg]

What would yo sell it for { how much }? What is the font? Thank you!!

[@regularguy6501]

I ask $2 per letter. The upper case are 2" tall and I found a font on my computer 20 years ago and modified it for my use.

[@DavidCampbell-p2y]

Hey Regular Guy. Great vid, very informative. Really like your Dremel scroll saw- tension arm is upfront - nice!. Could you please tell what year/model# it is and where it can be found online? Thank you.

[@regularguy6501]

I bought this guy about 15 years ago, maybe more. A year ago I simply wore it out and looked on FB marketplace tonget another one. I swapped out the table since I honed it down and now try to keep it oiled.

[@jmadadak]

I'm a newbie so I'll leave it to you to pick what and how. How do I know if I've got the right tension on the blade? Is there a list for this blade for this kinda wood, etc,,.

[@regularguy6501]

The blade description will tell you what it's applications are. And for tension, when cutting the stock, if the blade bends more than 1/8" you need to tighten it. For the soft wood I reccomend a #9, but not a skiptooth. They are good at removing sawdust but because they only have half as many teeth, they don't last as long. Olson or Flying Dutchman are the brands I suggest.

[@tomshafer4205]

Hi... can I buy those stencils you have their.... or where I can get them... please please reply...Tom in Florida

[@regularguy6501]

Hi Tom. Please email me at [e-mail]

[@younghavoc92]

Simple, never thought to just find a stencil and go for it! I over complicate things!

[@regularguy6501]

I looked on my computer and found a font I liked. I did have to modify it a bit but I made it work. Then made my own.

[@darrylsfarm]

I like that font! Is it Cooper Black Italic? Nice work.

[@regularguy6501]

Not sure. I chose it out of my computer decades ago and modified it.

[@bijan4727]

Hi very nice job. I love your mustache. I want to buy my scroll saw. What brand do you recommend? How long does it take to make what you made ? How did you make your stencils? Can I buy them on Amazon? I appreciate your input.

[@regularguy6501]

Thanks. I appreciate the input. I find a font on my pc that I like and use that. I do have an extra set I can sell you. Send me and email to [e-mail] and put stencils in the subject, I can give you more info there.

[@murtdowling]

Starting out

[@regularguy6501]

Keep at it. And don't worry about nicking your finger, you will.

[@murtdowling]

Where do you get your patterns

[@darrylsfarm]

Great work! How do you place letters that drop under the line like g, y, j, or p? Do you have to use all caps?

[@regularguy6501]

Great question. I simply stand them up on the line.

[@wendyjuede2263]

Would you be willing to make and sell a set of your name templates cut out of acrylic?

[@regularguy6501]

I would. I have some very thin .04" of an inch clear. A set of upper and lower case letters and numbers zero thru nine and asking $100 with free shipping. I can also make it out of 1/8" doorskin plywood for the same price.

[@alangeorgebarstow]

Good video. By the way did you know that, in the UK, if a man describes himself as 'regular', it means his bowel habits are consistent. 😉

[@regularguy6501]

LOL !! Then my name fits. 🤣👍Thanks for watching.

[@E-BikingAdventures]

Regular guys don't have a mustach like that and wear a witch's hat.

[@regularguy6501]

A witches hat!?? LMFAO !!! Agreed on the mustache but the fedora has never been associated with witches. Gangsters maybe . . .

[@chuckharrington4184]

Where can I find that type of letters

[@regularguy6501]

I found a font on my pc a dozen years ago and had to modify it to be able to connect them seemlessly. Then I settled on the size and cut my own templates. Over the years they go kinda broke up so I just cut a new set a few months ago.

[@regularguy6501]

Sorry 2 dozen years ago.

[@shaineriches4369]

That is a mustache an half

[@regularguy6501]

Thanks. I appreciate that.

[@davidmoses4285]

What is the font of the letters that you are using. Did you cut them out yourself? If so what kind of acrylic did you use?

[@regularguy6501]

I did cut them myself. I used a thin acrylic from amazon. Not sure of the thickness. But don't use clear, if you drop one or set it down it's hard to see when you need it again.

[@tabibhossain9726]

What is the type of wood

[@regularguy6501]

I usually use pine/fir.

[@MikeyDonna]

Back ground music to loud, couldn’t see what you were cutting , what’s the point if you can’t see ?

[@regularguy6501]

Sorry about those things. Still trying to figure it all out.

[@desertheavens]

I could see what he was cutting. Slow down the video speed if you need to. It's really hard to do a task that requires both hands and material and video it where you can see everything clearly, just not possible.

[@KGNAHDEE-a.k.a.PeanutsnCorn]

IS YOUR MUSTACHE REAL?

[@regularguy6501]

Indeed it is. Murray's bees wax helps me keep it under control.

[@serendipitynz]

really don't like the background soundtrack - unnecessary and intrusive.

[@regularguy6501]

Agreed. Years later and I am still playing with the limits of the formats.

[@p.macdermott2490]

What type blade do you use, (number of teeth for that thickness of wood).?

[@rainbowbudgies1129]

Thanks for the video. Will give it a try I thought the music was fine. Some folks just live to complain.