SCX10 Steering Link Mod With a Cheap Link Set

[@Epicleptix]

I have the same axles on my 2 speed injora chassis with those axles and had problems with the steering locking in because you just could get the full steering angle with that standard bar in the front. Spent hour with playing around with it and also thought about purchasing these links. Now I’m gonna order them and do it just like you did. Thanks for the great advice 👍🏻

[@RCMechanicGarage]

Excellent! Glad that you found the video helpful. Stick around for more. New content coming up February 14.

[@DirtDobberRC]

Can you make a video on the upper and lower linkage setup. I need to know which link goes where. I have looked everywhere online and i cant find a video.

[@RCMechanicGarage]

I can do that. thank you for watching.

[@DirtDobberRC]

​​@@RCMechanicGarageheck yeah brother your a life saver!

[@adrianwilliams3521]

Good video very helpful

[@RCMechanicGarage]

Thank you

[@donaldhenke2750]

what shocks are you using?

[@RCMechanicGarage]

The shock on this one are actually a no name brand. They came with the scx10 rolling chassis kit. I bought the rolling chassis off of ebay. I believe Touchan hobby has it

[@DirtDobberRC]

I really need help with the upper and lower chassis setup

[@RCMechanicGarage]

What are you building?

[@DirtDobberRC]

@@RCMechanicGarage I bought a axial chassis off Amazon. The wheelbase is 313mm. I bought the silver linkages with the red spacer on each end made for axial SCX 10. They are 3 different sizes out of the 8 links I bought. One measures at 124mm end to end the 2nd link measures at 132mm end to end and the 3rd link measures at 139mm from end to end. I just need to figure out which link goes where so I can end up with 12.3in or 313mm.

[@RCMechanicGarage]

@@DirtDobberRC The longer links go bottom of the axle and the shorter at the top.

[@RCMechanicGarage]

The longest 2 go at the rear bottom of the axle. Usually

[@DirtDobberRC]

@@RCMechanicGarage ok I will try that. If I run into any issues I'll message here. Thank you for the help I really appreciate it.👍👍

[@gma9121]

Price 🤔🤔

[@RCMechanicGarage]

I believe the links where under 30.00 when I filmed this. Thank you for checking out the video.