Scx10iii Rear Swaybar Changes EVERYTHING!!

[@turbomike71]

I am recently retired auto mechanic of 40 years. I have more time for RC, and bought 3 more trucks! Congrats and enjoy yourself, doing the things that you love to do

[@old-rcplane-phart]

& a lot of our specialized tool work on rc!

[@qrisemrc]

Oh, it certainly seems better to install a sway bar. Thanks to the video, I think it will be a lot of reference. thank you👍👍👍

[@mistermasada1829]

Nice job on that anti-sway bar. I just put the Fusion Pro in mine, along with high voltage capable servos, aluminum beadlocks, Squid’nserts,and G8 Hyrax tires. This anti-sway bar will finish it up. Thanks for the video.👍

[@rc-daily]

If you use the piano wire or something similar you cab take a file and make the rod a little bit smaller in the middle to make it a little bit softer too.

[@RDEnduro]

Great comparison it did work! Jumped the gap at 7:27 nice

[@frederickbehn5610]

Brilliant job man, I have been wanting to do this to my Traxxas TRXs. I am not that much of a rock crawler more of a trail truck guy, I cannot wait to develop sway bars for my trucks.

[@matrix9_116]

all i can say is that the park looks amazing sir

[@andrewwadas2180]

Huge gains with sway bar and the bungee will do even more on this rig. Awesome work sir. Oh and yeah the ProLine aluminum wheels would definitely add alil more weight down low.

[@CM-ig2pf]

I’m pretty impressed actually! Definitely good to know! Congratulations on your work retirement! I was very fortunate to retire at 55 and young enough to enjoy life the best I can!👍👍😁😎✌️

[@old-rcplane-phart]

After the 1st year of retirement, u gotta find stuff to DO! I retired at 49. (Army vet, destroyed back, L knee & neck helped🤪🤷‍♂️)

[@CM-ig2pf]

@@old-rcplane-phart first of all thanks for your service! I went into the air force right after high school! Had a lot of fun after boot camp! And yes you definitely have to keep busy! 👍😁😎✌️

[@All_RC_Fun]

Great to meet you at BTC. Helpful info. I’ll need to add the sway bar to the Search & Rescue Gladiator. Thanks for the tips.

[@timothybrown1189]

Going rc4wd deep dish wagon wheels on mine. They are 5 lug and kick the wheels out just enough to make it look more scale without having to lower it. I test fit the ones off my TRX4 '79 Bronco and they look perfect. Pretty sure the wider track will help with roll overs.

[@carlbModels]

I added a softer front arb and a firmer rear to my crawler, and it articulates massively still, but stays level on the power. Loved your video. DIG is better than i thought 👍🍺🇬🇧

[@CrawlersCampRc]

I got one of these on order! It's really a deal can't pass. Seems like the only problem is the 100mm shocks torque twist. Think I'll go 90mm shocks. Look like a decent way to solve also

[@boldrbangr9834]

Good review! I added a Reefs rear sway bar to my SCX10-III Gladiator & had the same great results

[@derekhell666]

OG wheels. Wish we had more classic looking options from companies.

[@RaccoonCity-ss1lb]

SSD RC makes beadlock slot mags in chrome, silver, and black. That’s what I run on mine with proline BFG Krawler T/A.

[@fishnrc294]

Need to find a way to mount those center wheel spinners on the metal beadlocks.

[@rcrockpiles9535]

Put a sway bar on a Vatterra Accender and the improvements were awesome.

[@BusyBeesGrading]

I got 2 of them at the $299 price. Love to see the install of the sway bar. I have 2 ordered.

[@CrazyQuadBrothersP3]

Hello Joe, what extra pieces do I need to mount this sway bar on. I have everything that came with it. I have Kevin fines mount. But I see you have some metal spacer spacer rods in between reefs bars and plastic mount. Where did you get those etc.

[@seanbristow6757]

Ive got to try this on my gen9 ,watched you vids on it as well ,my ecto does well with one ,ive tryed on my belly dragger ,not so good ,have the currie one ,will be building this week end to try out ,def think it help for body roll fer sure thanm u for all u do good sir ,happy trails

[@bbeckers24]

It's amazing how much of a difference that swaybar made.

[@rc-daily]

That's why we like them so much

[@vitalej00]

That was a huge improvement. Impressive

[@tynkertymerc1641]

You should come out to santo's vortex trail head. I'm trying to get a monthly night crawl going

[@RudyF6]

Dude, you just fixed the only complaint I have with this rig!! BTW, keep the original wheels. Are you familiar with Parnelli Jones and his "Big Oly" Baja 1000 racer in the early 70's? Google it and have a look - those are THE wheels! I have a turquoise one that will stay a crawler/trail truck, but I just ordered a white model to build a tribute Big Oly truck - that swaybar will be going on both of my Broncos eventually.

[@eddytoy9496]

I’ve been wanting to put a reefs swaybar kit on all of my rigs since you first used it on one of your rigs when they came out. Counting down the days to Beat the Creek, hope to see you up there!

[@ExocagedRC]

See you there!

[@WreckitRalphie]

I can’t wait to meet exocaged. I need a autograph

[@KurtsRCs]

I won this truck in a raffle and the guy I won it from cut the hood open and put hinges on it to show off the motor. Axial put all that scale work with the plastic under the hood put you can’t see it unless you cut open the hood

[@Jeeplee_rc]

I took the motor cover and made it into a center hood body mount for all my bronco body's I run four total on the scx10III platform.

[@reddsshaker3477]

Really nice setup! But you need a driver figure in the seat. 👌🏼

[@davidmedley5970]

I got two of these for my boys and they love them. I brought my Capra along with the two Broncos from Alabama to Utah to do some crawling. Amazing country for crawling. Capra is awesome. The Broncos are a lot of fun, but you have to choose your lines more carefully. I did notice the torque and the front end coming off the ground a lot. How much would you charge for all parts included sway bar kit?

[@DadsRCGaragePNW]

Are you close to WA State by chance? i would love to come visit and crawl at your RCcompound!!!

[@douglaselliott8298]

I eagerly expect mine delivered tomorrow. I will immediately pull the DIG servo's plug so it can't aggravate me to near violence as did my Capra before disconnecting it. I hope pre-loading the rear springs accomplishes much the same as the Reef's anti-sway bar. At 15+% of the principal cost of the truck, they sure aren't giving them away.

[@DadsRCGaragePNW]

so this is the one that will make me jump into the big ones. i thought i would save and get the clone chassis for the t word truck but after seeing this and having one come into the store to sell as i write this comment im trying to buy it with my next check, hahaha im going to need that sway bar information

[@grizzlyworksrc]

it's been so tempting to pick one of these up. I've been looking at a VS410 kit though. and I think it will be the better performer.

[@CornholioMcGeeRC]

3BRC G13 Pro for the servo Great for that and not a bank breaker

[@jdsrcs8061]

Mod made a huge difference!!! 🤘🤘🤘🤘

[@danwoodruff4323]

Will you be selling the 3D printed pice for the sway bar?

[@Darknynja2]

I know it's been a little while since you made this video, but I was wondering if you could tell me where I might find the file for the printed part you talked about? I would like to install these sway bars myself and would like to use the printed part too. Thanks.

[@4x4fabrication]

night runs are a go!

[@Jeeplee_rc]

Desperately need this for mine.

[@onsiterc5199]

If you bring one of those to beat the creek I'll buy one for my 10.3 bronco 😅

[@fiveomagic8844]

How can I get the mounts for the sway bar for my scx10iii bronco? Will you have any mounts at btc?

[@vizionct1]

Hey Joe. Awesome videos brother! Congrats on full time utube. Any way we can get your 3D printed mount and sway bar spacers? I ordered amazon one for my early bronco.

[@thomaswoolsey2602]

Bump. I too want a sway bar. Where can we buy the Mount and spacers?

[@humbertovaldez6116]

Sign me up too.

[@RCGents]

You are a genius my friend thats a good work 😉Can you imagine it work also with another swaybars then the Reefs RC one and are any parts 3d printed by you ? 👌Cheers

[@stompindakka3222]

do you have a review on the bronco been looking to get a new axial since the 2.2" wraith came out.

[@Bradon881]

I wonder if I can upgrade my Phoenix with these

[@3lefthands]

Looks pretty cool, how did you fixed the swaybar on the axle? Really nice i want one🤩

[@grizzlyrc8720]

Stock wheels look great

[@bengerber1521]

Hey man you have any idea what I can put together for a rear sway bar on the Vanquish Phoenix portal? Be damm glad to hear what I can get

[@markstopczynski5869]

Do you think something like this would be good for a comp crawler c2?

[@thejeepinrealtor5742]

I like the stock wheels :)

[@robertdidriksson2460]

I like the scale look,

[@Bluecuban71]

Hey Joe 👋 Loved the video and I'm impressed on how well it climbs now . I have a question, can that Reefs swaybar work with the Traxxas Hauler?

[@silentjde]

Is the file for the mount available anywhere?

[@bryanjames1376]

Has any one tried out the cheap amazon special? if so how did it work for you? Cheap out or save up for the Reefs?

[@rc-daily]

Reefs 800 lp!!!! Or a raw 500! Or the 3brc g13 pro!

[@justinhopkins2203]

What do you do for a day job exo just curious

[@ExocagedRC]

Well as of 3:30pm today. I do RC’s for a living. I was a Mechanic.

[@seedofjacob2236]

Put a Reeves 422 in there.

[@stephharney8964]

Nailed it 😂

[@BC-rc]

Just bought mine at 299, no way on the higher price.

[@jeremyhicks6324]

Pro line all day

[@cjv29er]

Reefs RC Raw500.

[@BulldogB101]

Stay stock on the rims!

[@chriskryder2994]

People scream rear link riser to keep the front end planted. By physics a link riser only works with high wheel speed. They say you can't run a sway bar on a crawler. Absolute proof most people are not qualified to design suspensions. Th

[@hobbyroom2126]

Stick with oe wheels

[@brandydarling1]

Gentlemen! …🙄

[@underarockandstuff]

Oh no!😂

[@3dman875]

I really like your KZbin channel until I was made fun of over my spelling

[@bsfunk44]

Classic Broncos never ran knock off hubs...run the Prolines