Wing Gundam Zero EW Ver. Ka | MG | Gundam Build | ASMR | Gundam ASMR | Gunpla ASMR Build

[@SDHOBBY]

※조립 & 도색의뢰 문의 : 네이버 [e-mail] 또는 인스타 DM으로 보내주세요~!※

[@xxnike0629xx]

16 년 만에 ... 드디어 반다이가 이 MG를 업데이트했습니다. 빨리 사고 싶다~! 반다이가 MG XXXG-01W 윙 건담 EW "Ver. Ka" 도 만들 것 같나요? 그런 다면 한정판이라고 생각합니다. 1:50 가슴 조립 2:53 머리 조립 3:53 팔 조립 5:17 어깨 조립 6:42 다리 조립 8:01 허리 조립 9:05 백팩 조립 10:21 버스터 라이플, 빔 사벨, 방패 조립 10:48 최종 조립 11:05 360° 회전

[@수호신보보-p4k]

보통 MG 트윈 버스터 라이플 손에 끼면 그 무게 땜시 내려갔어는데

[@정영민-k8e]

윙 건담 EW Ver.ka 있지 않음?

[@SDHOBBY]

@@수호신보보-p4k 윙제로버카는 관절이 넘나 짱짱해져서 ㅎㅎ

[@ozzygodisgod]

I just did the RG version of this Gundam and really enjoyed it. It was my first RG. I hope to do the MG one day.

[@SDHOBBY]

The RG kit is really good, too. The details are amazing, right? I want to try RG and MG again. :)

[@infectedfry]

this video should get more attention since he is the first one to do an asmr build on this kit

[@SDHOBBY]

I hope so. For this ASMR, I worked all night without eating 4 meals. lol :)

[@infectedfry]

@@SDHOBBY your dedication man i respect that keep it up

[@SDHOBBY]

@@infectedfry That's too much praise for me. I'm happy to have someone who gives me strength like you. I'll have more fun in the future :)

[@chrollolucillfer]

This the reason why I bought RG Wing Gundam Zero EW and I never regret it

[@SDHOBBY]

I don't regret it either. lol

[@dylans6658]

Read the title

[@eronronix5718]

This version of MG gundam wing EW is lit..hope that in the future there be exia 2.0 or exia ver.ka

[@SDHOBBY]

I wish the version of ver.ka would be released again :)

[@KunaiKrazy]

I wish more could have done with the wings like what they did with the upcoming RG Wing Gundam.

[@devzeppelin1911]

I'm betting that since mg Virtue is coming in 2021 we'll get an Exia 2.0 in 2022

[@SDHOBBY]

@@devzeppelin1911 That makes two of us.

[@SDHOBBY]

@@KunaiKrazy There are a lot of people who like wings, so I think it's going to happen

[@reigaming8611]

I'm about to receive my first ver.ka just like this and this is the video I'm most satisfied to serve as a guide. Keep it up!

[@SDHOBBY]

Congratulations. You'll be very satisfied. And thank you. I'll continue to enjoy myself :)

[@martinb6065]

This video needs more attention. Amazing stuff man can’t wait for this channel to blow up

[@SDHOBBY]

Wow. Your words really make me happy, I need to work harder. :D

[@healingpla]

으~~ ASMR 빌드 편집... 그 수고스러움 잘 알죠... 너무 고생많이 하셨습니다. 영상 너무 깔끔하고 재밌게 잘 봤습니다.

[@SDHOBBY]

감사합니다 힐링프라님 'ㅁ'ㅋ 언제까지나 즐겁게 유튜브 합시다 +_+ㅋㅋ 올 한해 수고많으셨어요!

[@SwingCritic141]

Why did I just watch this whole video, I spent 40 hours on this kit 😂 nice video man!

[@SDHOBBY]

Wow! That's really cool. Thank you :)

[@SwingCritic141]

@@SDHOBBY I have to be honest, when I got to the end of this video I thought “damn... he won’t even panel line or put on decals?” Little did I know you are actually a Gunpla pro and made an epic custom Wing Zero!! You’re one of my favorite channels now

[@SDHOBBY]

@@SwingCritic141 Hahaha. I see. Originally, I wanted to include all the assemblies and customizations in one video. But my friends didn't want it. Therefore, we are separating the assembly and custom and uploading the work video. And I'm not a professional. I am enjoying my hobby while learning through KZbin. Thank you for watching my channel well and for your interest. It's really touching for me. Let's continue to have fun hobbies together. Have a nice day. Thank you :D

[@SDHOBBY]

I also bought both kits. It's a really stylish and cool kit:)

[@pt.arvindokaryautamaarvind4410]

keren banget robot gundam nya hebat bisa bikinfilem dari maina

[@ExtraIceSugar]

Bet he did more editing than building the kit itself. Nice video for sure!

[@SDHOBBY]

It certainly takes longer to make a video than to make a kit. Thank you. :)

[@Gunpla-build]

영상 언제봐도 멋있네요 수고하셨습니다

[@SDHOBBY]

감사합니다~!

[@xxnike0629xx]

Hello Mr. Jason!

[@BenjaminMizic]

Hi so I’ve encountered two few problems with this kit. 1. The two lower small blue parts that slide into one keep coming loose 2. The armor on its arms seems not to want to stay together along with the fin that goes inside it. Also I can’t attach the shield that attaches to its arm because those parts keep falling off. 3. I ran into problem with the one lower wing socket feather being cracked. So I had summited it. Then fixed the ball the feather piece that sniped off without realizing it. Now it’s really loose. How should I go about fixing these issues?

[@johanesjohnson479]

I like your video and i like how you build gundam 👏👏👏👏👏👏💖👍👍

[@SDHOBBY]

Thank you so much. I'm encouraged. :D

[@GUNDAMRECIPE]

오! 벌써 만드셨네요 :) 이 영상의 치명적인 함정은....앞으로 저의 고생길이 보인다는게....ㅠㅠ 고생하셨어용 ㅎㅎ 이제는 날씨가 많이 쌀쌀합니다ㅠㅜ 감기조심하세요

[@SDHOBBY]

어제 점심이후로 먹지않고 자지않고 만들고 편집한결과!!! 건우님의 고생길에 치어스!!

[@davekemerer2566]

Great vid, love the way it was filmed. Helped me to make a decision on which kit to buy

[@SDHOBBY]

I'm so happy to be of help to you :)

[@PDS24]

You found a way to combine two things that seemed soo different. Gundam and ASMR. The way you cut and attach pieces has really good ASMR sounds. Unbelievable. 💯💯 The ASMR gets better when you cut closer to the mic. Love those bassy pop sounds. 👌👌

[@SDHOBBY]

Thank you. If I get a new microphone, I'll try to do that:)

[@guntaku]

역시 윙건담 미남이다

[@SDHOBBY]

구판과 PG는 명함도 못내미는..ㅋ

[@oatmealraisincookiesaregar2548]

Great video, i want this kit even more now lol

[@SDHOBBY]

Thank you. Let's continue to make fun Gunpla kits together. :)

[@jasgundam88]

nice mannn... keep build them up!

[@SDHOBBY]

OK. All right. Thank you~! :)

[@shanewright344]

This doesn't trigger my ASMR, but that doesn't matter. I could watch you build gunpla all day anyway. 🤙

[@SDHOBBY]

Thank you. I always enjoy building. :)

[@kremit768]

Hi, I'm trying to build my first Gundam, and you're video really helped me understand the process taken for it. I would just like to ask what tools you used in this video. Keep up the great content!

[@SDHOBBY]

Hello, friend. Nice to meet you. The tool I'm using is... NT-KNIFE plamodel nipper China ST_A Nipper I'm using it like this. :)

[@CHUMovieOfficial]

Since the Builds TV stopped making video, I have been watching your channel since then, I hope you will use this chance to develop your channel

[@SDHOBBY]

I also enjoyed watching Builds TV. I hope he will come back someday. Your reply is quite exciting to me. Thank you. I'll do my best :)

[@DarkROSkull013]

I see you've added more tricks up your sleeve yet again. Haha I like this. You definitely improve with each video. Good job man. :)

[@SDHOBBY]

Repeated patterns are somehow boring, so I always try to try new things. Thank you. :D

[@지민-t4b]

영상 잘봤어요~^^

[@SDHOBBY]

감사합니다~

[@seungjanglee9783]

잘 보고 갑니다~^^

[@SDHOBBY]

네~ 감사합니다 :)

[@GunplaNewbie]

This is actually very relaxing to watch. Chill vibe videos are my jam. Maybe I'll try making one on my channel :D

[@SDHOBBY]

Wow~ I'm looking forward to it :)

[@sepdioenriquez702]

is the chest clear part kinda loose? what did you do for it to stick in place

[@SDHOBBY]

I took it out on purpose for painting. :) kzbin.info/www/bejne/sHaqdnRrl5qcZ5o

[@ga_me0421]

음! 기다리고 있쉈숴

[@SDHOBBY]

감사합니다~!

[@PapaHardStank]

So is there a mess up on the upper shoulder blades going over the disk right below it?

[@SDHOBBY]

I'm sorry. I translated your writing and it's a little hard to understand. Can you explain it again?

[@kidultchannel]

지온기체가 아니라 관심이 없었는데 오래간만에 나온 버카 mg라 구경왔습니다. 영상 퀄리티 너무 좋아요! RG지옹그 나오면 ASMR영상 올려주시는거죠? 😁

[@SDHOBBY]

버카는 역시 버카다..라는 생각이 들더라구요 ㅎ RG지옹도 출시되면 달려볼생각입니다. 감사합니다~!

[@정영현-w7t]

asmr 듣기 좋고 영상도 재밌네요 ㅋㅋ 잠깐 가조립 한거라 상관 없겠지만 맨앞에 날개 깃털 3쌍이 반대로 조립되있는거 같아요!

[@SDHOBBY]

감사합니다 :) 그리고 반대로 조립한게 맞습니다. 나중에 도색할때 이렇게 위치잡고 하면 어떨까? 생각하면서 한다는게 저대로 해버렸더라구요;;

[@정영현-w7t]

@@SDHOBBY 아하ㅋㅋ 프라를 자주 사질 못해서 항상 눈으로 대신 호강중입니다^^

[@SDHOBBY]

@@정영현-w7t 앞으로도 열심히 눈호강 드리겠습니다 +_+ㅋ

[@aethansantos8989]

Nice

[@SDHOBBY]

Thank you :)

[@뽀동커플]

대리만족 하고갑니다..👍🏻👍🏻 구독하고가요!!

[@SDHOBBY]

감사합니다~!

[@뽀동커플]

@@SDHOBBY 근데 확실히 외날니퍼쓰면 나중에 케이트제고 할필요없이 깔끔하나요? 가격이 좀있어서 고민중이라 ㅠㅠ

[@SDHOBBY]

@@뽀동커플 음.. 어떤 니퍼를 쓰던지 게이트를 완전히 제거할수는 없다고생각해요. (궁극니퍼도 마찬가지) 하지만 그렇다고 외날 니퍼가 안좋다는 뜻은 아닙니다. 가성비를 따지자면 저는 모식완조 외날니퍼를 추천드리고싶네요. 1차로 소위 말하는 막니퍼로 한번 게이트를 멀리 쳐준뒤에 2차로 외날니퍼로 절삭하면 그나마 깔끔하게 자국을 최소화하면서 만들수있어요. 도색을 하지않는다는 가정하에 마지막으로 '게이트 피니쉬' 등의 유리사포로 남아있는 게이트를 정리해주면 꽤 깔끔하게 만드실것같습니다.

[@뽀동커플]

@@SDHOBBY 좋은팁 감사합니다!!!🤗

[@geniustv2016]

오❗👍👍👍 저 이렇게 하는 영상 너무좋아서 몇번 봤는데 SD 하비님 채널인줄 몰랐어요🤩ㅋ 재미있는 컷영상 대박입니다👍 저희도 한카톤 입고시켰습니다 ~ 구독하고 갑니다~

[@SDHOBBY]

아이고 저도 지니입니닼ㅋㅋㅋㅋ 교수님들?화이팅입니다~!

[@geniustv2016]

@@SDHOBBY 한번 모시고 싶은데, 시간한번 내주세요~^^ (진심 궁서체)

[@SDHOBBY]

그정도 클라스가 아니라서요 ㅋㅋㅋㅋㅋㅋㅋ 말씀만이라도 감사합니닼ㅋㅋㅋㅋㅋㅋ

[@kevintanjaya308]

0:58 what is the name of that wooden thing?

[@SDHOBBY]

Aha! This tree is a plate holder. Hahaha. I'm using it as a runner holder. :)

[@조종일-w9z]

역시 빠르군요

[@SDHOBBY]

딱딱딱ㄷ가닥딱딱딱~

[@noorimanhaqeem6095]

Please never give up. I hope one day you can be big. Love from Malaysia man

[@SDHOBBY]

Thank you, bro! I really enjoy Gunpla. I've never given up. lol :)

[@Strikertigerabm]

Hi, what's the difference between the green and red nipper? Thanks

[@SDHOBBY]

The green nipper is hard instead of dull. Therefore, it is used to the part in the first runner. The red nipper is sharp and weak. So remove the gate of the part that was from the runner.

[@사형수00]

이거 초6 때 멋있어서 산 다음에 만들었는데 그 당시에는 그냥 건담에 대해서 아무것도 모를 시절이라 데칼은 쓸 줄 몰라서 버렸고 그 이후에 가지고 놀다가 부순기억이....

[@SDHOBBY]

에구 아쉽네요! 그래도 추억이겠네요 ;ㅅ;

[@아무로레이의건담리뷰]

오~ 빠르십니다~^^

[@SDHOBBY]

끼니 모조리 거르고 밤샜네요ㅋ;

[@thumbthingshobby667]

어제 풀린걸 오늘 올리셨다니 ㄷ ㄷ 세계최초이신거 아니에요? 고생많으셨습니다 😁 제건 아직 물류창고에서 움직이질.....😭

[@SDHOBBY]

(크흑 ㅠㅠ 기사님들 일해주십쇼!!) 밤새서 힙드네요 ㅋ; 감사합니다!

[@thumbthingshobby667]

@@SDHOBBY 밤새우셨다니 😭 오늘은 푹 쉬셔요, 다음 영상도 기대하겠습니다~

[@SDHOBBY]

감사합니다~! ㅎ 텀브씽님 영상도 기다립니다 +_+ㅋ

[@thumbthingshobby667]

@@SDHOBBY 전 이제 퇴근 후 편집하러 숙소로 출근하네요 ㅋㅋㅋ 코로나 조심하시구요~ 😄

[@RubenPaintsMinis]

Did you sand down any nub marks?

[@SDHOBBY]

kzbin.info/www/bejne/sHaqdnRrl5qcZ5o The nub mark is being completely removed when customizing. Asmr build represents the assembly process only :)

[@ONLYPLA]

우횻~저도 이거 사긴했는데 언제 올지...ㅎㄷㄷ 빨리 만들고싶네용

[@SDHOBBY]

효진님만의 커스텀과 구판 신판 비교 리뷰 보고싶습니닷ㅋ

[@jason2876]

손톱은 첨부터 끝꺼지 나오는데 건담 손톱 네일 갑시다. 구독자 더 늘듯 ~♡

[@SDHOBBY]

시켜주실 제이슨 정님 구함

[@PsyChromed]

Nice video men u just earned a sub

[@SDHOBBY]

Wow~ Thank you :)

[@ping141]

Hi, when was this kit released? Also are they going to re-release it or make an updated one?

[@SDHOBBY]

This kit was released last November. I understand that you are selling it steadily :)

[@ping141]

@@SDHOBBY thank you!

[@이-y6s3f]

언리쉬드도 기대할게여

[@SDHOBBY]

언리쉬드라.. 될까모르겠네요 ㅋ 가능하면 준비해보겠습니다

[@s197rome9]

Wanted to know where the H6 should go

[@Dkshinigamithecollector6711]

Nice build. I wonder how long you edit your videos. Mad respect

[@SDHOBBY]

It takes eight hours to assemble and shoot and, I think it took about eight hours to edit the video :)

[@keeto428]

How difficult do you think this is for an intermediate builder?

[@xxnike0629xx]

No kit is inherently difficult to build. The actual building process is the same. Just take it 1 step at a time. 💯

[@SDHOBBY]

Assembly isn't that difficult. :)

[@SwingCritic141]

@@xxnike0629xx elbows on the master grade 3.0 RX-78 beg to differ lol

[@perfectkkangdagu4085]

오~~~~윙이다

[@SDHOBBY]

네이~!

[@QuanTa.73]

Does the lower arm not have an inner frame or I'm trippin'?

[@SDHOBBY]

Wing Gundam ver.ka had a unique three-part arm. Each frame exists. :)

[@ronaldreaganrimjobs4670]

The water slides took me 3 days of dedication to complete for me.

[@SDHOBBY]

Great job! Fighting!

[@destiny5145]

캬~! 윙건담 멋있네요 시동님 혹시 헐거운부분 있나요?

[@SDHOBBY]

감사합니다~! 제가 만들었을때 윙제로버카에 헐거운부분은 없습니다. 다만 너무 뻑뻑해서 문제인 부분은 있어요 손목이라던지.. 손목 부분이라던지.. 아니면 손목이요..

[@destiny5145]

@@SDHOBBY 좋은정보 감사합니다~

[@setsunafseiei4480]

you built the feathers the other way around its supposed to curve outward not inward but only the front feathers tho

[@SDHOBBY]

You saw it exactly. I purposely assembled it the other way around with the painting in mind. :)

[@mykelibid]

Hello, Im new to your channel, may i ask what nippers do you use for the primary and what do you use for finish? Thanks a lot and more power to your channel... Just keep building...

[@SDHOBBY]

Hello, my friend. The last nipper I use is ST_A in China. :) Thank you.

[@mykelibid]

@@SDHOBBY thank you very much

[@SDHOBBY]

@@mykelibid You're welcome :)

[@jourgejoestar2768]

what type of mics to people use to do these kinds of videos?

[@SDHOBBY]

I don't use another microphone. It's only a cell phone. :)

[@BalthierGR]

You need extra tools or you can do it without tools ???

[@SDHOBBY]

Model nipper is enough :)

[@kaisertech]

Those feathers in the front seems odd, was it assembled incorrectly?

[@SDHOBBY]

It's the opposite of the manual. I am going to customize painting like this :)

[@PsyChromed]

its assembled correctly

[@oscarmalerva352]

I got one question I’ve seen a lot of videos where the person just cuts the parts like you did, like one after another, and my question is “do you guys memorize all the parts and know which pice goes with the other or what because I barely star building gundam and I have to use the manual all the time, hope to get an answer by the way GOOD VIDEO👍🏼

[@SDHOBBY]

Hello, thank you for your opinion. Other people don't know how to work, but I have a habit of recording the part number in the excel file before cutting the part. i work in order, so im not mistaken. :) Thank you for enjoying my video.

[@kyunginbyun3699]

와... 이번 영상 퀄리티 좋네요 (특히 부품 통에 담아서 왼쪽으로 밀었을때 부품이 딱 정리되는부분이욧!!! 이제 먹선이랑 300개 되는 습식데칼 ㄱㄱㄱ!!!)

[@SDHOBBY]

ㅎㅎ 감사합니다. 먹선이랑 데칼뿐만아니라 도색도 할거에요~

[@emperorkiva8063]

The actual-bird-wings Wing now has a Bird Mode

[@SDHOBBY]

I didn't like the new mode, so I just uploaded it. :)

[@emperorkiva8063]

@@SDHOBBY I really like it actually. That mix of "natural" wings and mechanic body looks like something that came out from a fantasy world

[@SDHOBBY]

@@emperorkiva8063 That's right. When I was 15, I was shocked to see Wingundam's wings because they were so cool.LOL :)

[@emperorkiva8063]

@@SDHOBBY My favourite version is the Wing ver. ka tho... The one from the RG

[@SDHOBBY]

@@emperorkiva8063 I love the RG version, too. So I'm done making it. :D.

[@teejayar]

Hi! Can i ask what microphone did you use?

[@SDHOBBY]

Hello, I'm shooting with iPhone 6. :)

[@teejayar]

Oh, you're not using external microphone?

[@SDHOBBY]

@@teejayar Yes, I don't use it. :)

[@teejayar]

Nice! Thanks!

[@SDHOBBY]

@@teejayar You're welcome :)

[@1610mephisto]

게이트 자국... 아트나이프로 정리해주고 싶다...

[@SDHOBBY]

다음영상에서 제거되서 나올거에요 ㅋ

[@gpaintedsenyo3184]

Hey, cool vid, do you plan to do reviews in the future?

[@SDHOBBY]

I'm thinking of custom painting the next video. :)

[@yunbongking]

구형보다 관절이 강하겠죠? 피니시 니퍼는 뭔가요? 영상 잘 봤습니다.

[@SDHOBBY]

감사합니다. 구형에비해 비교할수 없을정도의 관절 강도를 보입니다. (손목같은경우는 너무 짱짱해서 부러질수도..;;) 피니쉬니퍼는 가성비가 넘나 뛰어나 대륙의 실수라고 불리는;; ST_A 니퍼입니다.

[@ralphjiandelacruz9593]

I hope I can do it with my barbatos lupus rex.

[@SDHOBBY]

It's going to come out on MG someday! :D

[@ralphjiandelacruz9593]

@@SDHOBBY mine's got a frame.

[@SDHOBBY]

@@ralphjiandelacruz9593 Isn't the mg version of barbatos lupus rex not release. Are you talking about the RE/100 version of the kit?

[@ralphjiandelacruz9593]

@@SDHOBBY I don't know about the RE/100 if you mean the 1/100 then yes.

[@adm1nistration]

i always hated the wings on this kit but this was my first one

[@SDHOBBY]

This kit will not be disappointing :)

[@chidungtruong7572]

Your video is great, I've been following you for a long time, but why are the views so small

[@1ungawa]

Niche hobby, lots of channels on youtube, hard to get noticed.

[@SDHOBBY]

Wow, thank you so much. I think we should try harder :D.

[@SDHOBBY]

You're right, ungawa~! :)

[@emmanuelgutierrez6306]

Sandy the stickers?

[@SDHOBBY]

Used to paint. :) kzbin.info/www/bejne/sHaqdnRrl5qcZ5o

[@1989kenshin]

newbie never use sd ,hg . can build MG bro ?

[@SDHOBBY]

It's possible :)

[@nightg4mer810]

Is this worth it?

[@SDHOBBY]

Yes, it's worth it.

[@ttnama8741]

조립감이랑 외형은 어때요? 살려구 하는데

[@SDHOBBY]

조립감은 반다이답지않게 빡빡한 곳이 더러 있습니다. (그래도 그렇게 크게 신경쓰일부분은 아닙니다. 사포로 갈아주거나 나이프로 살짝 긁어주면 되요.) 외형은 넘사벽!!

[@ttnama8741]

@@SDHOBBY 아 ㅎㅎ 그렇군요 샀습니다 ㅋㅋ

[@SDHOBBY]

@@ttnama8741 축하드립니다~! 이쁘긴 엄청 이뻐요 ㅎ

[@lockonstrauss7714]

why not put the eyes?

[@SDHOBBY]

Because I paint. :) kzbin.info/www/bejne/sHaqdnRrl5qcZ5o

[@ming43199]

Wear head phones for better experience

[@SDHOBBY]

Which headphones are you talking about? :)

[@ming43199]

@@SDHOBBY bru

[@seannywanny9497]

How big is that

[@SDHOBBY]

20~23cm

[@DenTua]

Barbatos please with no music

[@SDHOBBY]

I've already made Barbatos, but I'll try again next time if I have a chance:)

[@DenTua]

But i want ASMR not musik

[@SDHOBBY]

@@DenTua I just put it in for a while after assembling it before saying hello:) But if I have a chance, I will make it without any music :)

[@방구석수집가-이랑]

빨리 조립하셨네요

[@SDHOBBY]

밤새고 밥안먹고 만들고 편집하니 지금이네요 ㅋ

[@carljavier2560]

Am I the only one disappointed the hands aren't grey like the usual?

[@SDHOBBY]

I know the hands of Wing Gundam are white :)

[@오늘의사진-b3f]

아 ㅋㅋ 요즘엔 정주행 한다고 ㅋㅋ

[@SDHOBBY]

넘나 감사한것~!!

[@jaymiechan]

nice ASMR, but the misbuild on the shoulders (light blue parts should be reversed) is painful to see.

[@SDHOBBY]

Wow~ I didn't know until now!!!

[@vincesales1463]

Thought it was Rick Rolls

[@SDHOBBY]

Ha ha :)

[@markterrenal2207]

Just like Gio 😒

[@SDHOBBY]

It's the good influence of PEDRO. :)

[@aethansantos8989]

C mom give them a chance