SDTM Cary Hardy: Air Brushing Your Pinball Playfield

SDTM Cary Hardy shows viewers the process of using airbrush to touch up a pinball playfield.

[@MRNBricks]

Hopefully constructive criticism. The 60 second intro is about 10x too long. :)

[@TiltingT]

Cant wait to see the finished product! She is gonna be beautiful!

[@CaryHardy]

I can't wait either!

[@donmorton7282]

The Bob Ross thumbnail is priceless

[@nflisrigged1395]

Lol Bob Ross Awe should have done the Bob delivery presentation lol Still good tho. I expected the thumbnail lol

[@Murphy_Peoples]

Well done sir. Check out Airbrush videos using Acrylics too. Harder to work with, but unreal results.

[@colt5189]

I would have done test sprays on a scrap piece of wood or something first. Maybe even on the backside to find a color that matched the wood.

[@CaryHardy]

Yup, hindsight is 20/20.

[@juanmanuelgarcia199]

nice job! will be doing this in the near future, my concern is clear coating. have you tried rattle can 2K? I just do not have the equipment but also saw you doing it with a pancake air compressor. can you give me a hand with a minimalist list of things I will need to get clear coating with little equipment? I am mostly interested in the air compressor model you use for this. I want the smaller possible that will enable me to air brush AND clear coat. And I am enjoying these vids more than the pin reviews, just a note! Thanks

[@CaryHardy]

I have a 2 part series on this channel where I go over what equipment I use. I have used a big compressor and the small one featured in this video. I noticed no difference in spraying clear. You would only notice a difference if you were to shoot in very long streams - which isn't needed.

[@ocaptainmycaptain6079]

Dope intro!!

[@CaryHardy]

Thanks.

[@mattlogue1300]

Thanks I'm about to restore a pharoh '81 playfield

[@peterhemley7848]

That is a great tutorial on playfield touch ups. I do have a question you mentioned having black in your airbrush. Where were the black spots you were hitting with your airbrush? But I really do enjoy your series on restorations. Thanks

[@CaryHardy]

Yes, the area directly above the inserts I was touching up. I didn't record that portion, but you can notice the difference if you pay attention.

[@peterhemley7848]

@@CaryHardy thanks

[@damonhuffman6681]

Hey Cary, nice work as always. Can you tell me how much drying time you allow between coats?

[@CaryHardy]

This type of paint doesn't take much to dry when you hit it with a heat gun.

[@doofy440]

Could you guys do a video on pinball layouts that have been re-themed over the years and if it made it better or worse

[@avenger6944]

You guys gone into hibernation ??

[@chrisbutler9594]

Lost me at the 50 second intro. I understand you guys need intros nowdays but seriously that was ridiculous