Sealing a block paved driveway

[@rand49er]

The advice here to "push" the sealant with the roller to allow it to soak in and get coverage is outstanding and is exactly what I needed before I do this on my own patio. Thx

[@jameschesterton]

Looks a treat. What's with all the negative comments, why can't people just take the video for what it is and move on? Thanks for sharing.

[@TonyMcCormack]

Kevin, best to wait until next Spring now. There's too much residual dampness in paving at this time of year, so unless you're using a water-based sealant (completely different to what's shown in my video) there's a risk of the surface going milky. Wait until we get a dry spell next March/April

[@TonyMcCormack]

We actually used close on 75 litres for two coats. First coat averaged 2.4 square metres per litre (just under 50 litres to seal 105 square metres) while the second coat (which is not essential) went much further, just over 4 sq m per litre ( 26 litres for 105 sq m = 4.03 m2/l)

[@TonyMcCormack]

No. This sealant doesn't make the surface slippery. That tends to occur with high gloss finishes

[@geoffreyalder7275]

I read that you should never seal newly laid block paving, but wait for at least 6 months before sealing........is this true ???

[@Chanesmyname]

But the smell of it...so strong and inflammable vapour...But I think it does make the blocks looks really nice when it settles.

[@douglasheld]

What is the music in this video? It is quite nice!

[@tubbychubby1]

Hi, great video, can I ask ur advice when u do this to light coloured blocks do they retain their original colour, and is their chance someone with no expierence can damage the blocks, thanks

[@TonyMcCormack]

+tubbychubby1 The blocks will probably darken slightly (some call it 'colour enhancing') but not actually change colour. As long as you follow the manufacturers' guidance and ensure the pavement is properly dry (including the joints) then it's not actually a difficult task.

[@woooooooo9061]

Could I use this method on my black patio slabs? I will use it on my driveway as well.

[@TonyMcCormack]

Yes, but you may be best advised to find a sealant specifically for the type of flagstone you have on your patio. Resiblock provide a range of different sealants, including one for sandstone. Horses for courses, as they say!

[@woooooooo9061]

@@TonyMcCormack Thanks👍

[@mariosmarios2094]

Do you have to jet driveway and sand before puttin sealant on it?

[@TonyMcCormack]

It's not essential, but it would not be a good idea to apply a sealant to a dirty or stained surface.

[@websiteemail4900]

Can this be applied to cobble stone paving too? Also how long after a new driveway can this be applied? Do you prefer the matt or gloss finish? Thanks and nice vid!

[@TonyMcCormack]

We wouldn't normally seal cobbles, but if for some strange reason we were asked to do so, it would need to be a different product as this one is specifically manufactured by Resiblock for concrete block paving. I don't like to see driveways sealed for at least 12 weeks after installation, 12 months, preferably, and I don't really like gloss finishes, but that's personal taste.

[@philwheatley5766]

How do I clean the driveway 12 months later? we have marks on our driveway.

[@TonyMcCormack]

+Phil Wheatley Clean a sealed driveway? It should be a simple matter of scrubbing with hot, soapy water, or using a power washer with a rotary head. There are specialist 'pavement grime' removers on the market which are very good but whatever you use, make sure it's acid-free.

[@alanrag1]

Hi how long after block paving is laid can you seal it

[@TonyMcCormack]

+josh raggett In theory, it could be sealed straightaway but we always consider it best practice to give new pavements at least 12 weeks to ensure jointing settles fully, any efflorescencce can escape, and any problem make themselves known. See - www.pavingexpert.com/sealants.htm#app

[@freemanchannel9222]

How much does it cost to re-sand and seal an area this size?.

[@WillSmith-qc3gp]

About 600

[@TonyMcCormack]

For that price, you can't even buy enough quality sealant to cover the driveway with a single coat!

[@mattseymour8637]

How much is it a tin?

[@fooBar55]

Q. What size nap roller are you using? 3/8, 1/2 or 3/4 inch? Recommendation for a brand of nap-roller?

[@TonyMcCormack]

It's a standard roller, probably 20mm or 25mm diameter, roughly 300mm length, lambswool-effect. I wouldn't be sure about the brand, that's determined by the sealant application contractor.

[@BucklandSteamClean]

That size area you are I guestimate you talking about min 25 litres over two coats which is what they recommend - cost of sealer from Resiblock is 207 pounds inc vat (retail price)

[@daz3434]

Go on EBay you can pick it up for £60 and not cheap crappy stuff 👍

[@buzroks]

What happens in 3 years when you want to re-seal as a poly-urethane has been used?

[@carolburnett1017]

good question, but where is the answer....?

[@finishedflooring9088]

Carol Burnett chemically or mechanically.

[@kevinjohn725]

Hi Tony ,Nice video, I'm have a new block drive done early next, My questions ,how long so I need to leave the drive before I seal it, I've been told to wait until the white residue comes out of the blocks, Regards Kev

[@richardnye4222]

How long does it last before needing to be redone?

[@TonyMcCormack]

It depends on how heavily the pavement is used but, even with daily use, you should get at least 2 years. I've now had 5 years with the driveway shown in the video and it wil probably need to be re-done next summer.

[@powerwashcleaning]

Tony McCormack Hi Tony hope you're well.... you know where we are when you want this doing again next year, Lee Kenny Https://www.powerwashcleaning.co.uk

[@paulbackhard6315]

About 2 minutes as they don’t do shit You might as well paint water onto it for all the good these things do

[@frankal9832]

Would it be alright to add a second coat or will it not be needed?

[@TonyMcCormack]

Yes - if you think a second coat is needed, then apply it roughly 4-12 hrs after the first coat. Some materials manage perfectly well with a single coat, but more porous materials often need a second "top-up" coat to give an even-looking finish.

[@mrhyde2681]

How long can you store the sealer for ?

[@TonyMcCormack]

+Mr Hyde You should check with the manufacturer, Resiblock, but from memory I think it has a 12 month shelf life.

[@mrhyde2681]

+Tony McCormack ok thanks how far will one drum go ?

[@mrhyde2681]

+Tony McCormack or should I say how many did you use in this vid.

[@TonyMcCormack]

It's documented on the webpage - 50 litres, I think

[@TraceUK]

I’m surprised you didn’t at least clean it first

[@TonyMcCormack]

If you took the trouble to read the webpage accompanying this video (the one mentioned in the introductory text to the video above), you would have seen that not only was the block paving extensively cleaned, it was re-jointed, had minor repairs carried out, and was completely refurbished prior to sealing. This video is only one small part of that process.

[@indokarasan]

Hi Tony, great video. Can old driveway, block paved to high standard about 25 years ago be sealed with this or any other sealant please? Of course it will be jet washed, resanded etc before doing so. , thanks in advance

[@TonyMcCormack]

As long as it's in good condition and properly prepared, then a top quality sealant should totally rejuvenate the pavement.

[@jasbo7288]

What's the benefit of sealing block paving??? Had mine 12 years now and never had too!!!

[@TonyMcCormack]

It's not essential but some people like the stain protection, the colour enhancement and, often most important, the protection against loss of the jointing sand to scour from wind, rain and power washers.

[@mattseymour8637]

@@TonyMcCormack think it's just as good to keep it clean and apply weed killer periodically and pressure wash to get all dirt out every year or 2.

[@TonyMcCormack]

@@mattseymour8637 Too much pressure washing damages the pavement structure. A sealant isn't the right answer for everyone, but for some applications, it can save a lot of stress and strife.

[@mattseymour8637]

@@TonyMcCormack I guess if you have the spare money to spend out on the sealer then yes

[@sprintcoding7358]

Your driveway also propably looks like shit 👍 some people have a sense of class and don't like weeds and eroded / sunken pavers. This video doesnt even show how to correctly do the job this video shows the cheap hack way of doing things.

[@andyw3152]

In the warm summer how long do you wait between power washing and sealing. Your site does say 14 days.

[@TonyMcCormack]

You have to judge on just how long it will take for the pavement to become *bone dry*. Any residual moisture can (and all too often does) adversely affect the sealants. Now, in Spring and Autumn this may well take a few days (does it really say 14??? That's seems excessive) but in the sort of summer we've been having, I'd say a couple of days would be adequate.

[@andyw3152]

Thanks, I've got to get this done tomorrow, plus in out country you never no if it will rain at any time.

[@justmyopinion9585]

@@TonyMcCormack so how much would you charge for a job like that including materials ?

[@daz3434]

Don’t over apply the sealant-Continues to turn driveway into a swimming pool of sealant 🤦😂

[@habibiak]

Does this prevent weed from growing between the paving joints ?

[@TonyMcCormack]

Yes: when a top quality sealant is used. Weeds can still grow on top of the pavement, especially where detritus collects, but this can be minimised or eliminated by regular sweeping of the surface.

[@sprintcoding7358]

Hell yes this video shows how to paint pavers not seal them there's a difference water based high solids sealer must be used

[@MrCopyrat]

that stuff cost £300?????

[@jeff_9074]

Can I do this on my lunch hour?

[@TonyMcCormack]

Jeff C in the summer: yes, but at this time of year the surface will be too damp to get a really good result. There are water-based sealants which could be used in cooler, damper conditions but they are nowhere near as effective as PU's

[@ChristRegeneration]

At $300 for 20 litres thats an expensive way to seal your pavers in Australia! Drowning it!

[@jamesmcbride2000]

ChristRegeneration it's about £50 over here at the minute I done one a month back and still have a tin left over

[@finishedflooring9088]

ChristRegeneration what %solids are you using?

[@hilary1538]

Should have got all that stuff of the top of your container before opening it 👍

[@rogerryan1758]

Looks like there is sand all over the layer of sealer at the end. ??? Why not spray on? Using a roller will bring stick to sand in joints...

[@TonyMcCormack]

There is no sand in the sealant. The sealant used in not best suited to a sprayer on this particular project. A roller is the manufacturer's recommended installation method for this type of project.

[@cristianogallotta9976]

Hi, do you need to put sand before the sealant?

[@TonyMcCormack]

+cristian gallotta You need to complete any re-jointing before applying a sealant. See the other videos in this series and the web page - www.pavingexpert.com/refurb_06.htm

[@macinead7]

What roller is on the end to applh sealant

[@TonyMcCormack]

It's a lambswooll roller - or, more accurately, a synthetic lambswool roller

[@kevphillips02]

Depends what you call quality.

[@thanxx]

bit close to the DPC that block :)

[@fleurdrose5504]

Save your knees by using pads or you will suffer down the road and it's not pleasant.

[@maninbootsuk]

WELL,.....??????

[@mrsthatcher9815]

it looked better before you did it

[@maninbootsuk]

Tell him i want his old wellies..! i'll pay him for them!!!

[@theiran]

I'd rather just pay to have him put it on. He's a cutie!

[@jimsmowing223]

Sexy on toast 🍤

[@kevphillips02]

I would do that area for about £295

[@iwanttosmokewhatyoursmokin4916]

Pretty crap not huge difference plus looks normal at end . Like u never done anything

[@TonyMcCormack]

"Looking normal" is exactly what I wanted, so I'm delighted with the result. You're most welcome to find something that pleases your obviously discerning palate for driveway sealants, and please do invite us all to comment on what we think of it....

[@Okkoson]

NOICE

[@tony231167]

why have stupid music in back ground?

[@margaretsmith5069]

The

[@slappfiskene]

nr 999.....grrrr

[@TheWilliamhh]

Awful Music

[@davesworld1972]

can i use the sealant on a concrete driveway?

[@TonyMcCormack]

You could, but if you speak to Resiblock, they will put you on to their product that's specifially suited for concrete driveways.