Sealing a Starbucks Cold Cup Using CRYSTALAC Brite Tone (EPOXY FREE)

[@Jewell2781]

Thank you for this video! Never knew this existed! I am allergic to epoxy, so this would be great alternative for me!

[@MelissaCrafter]

Yes !!! A safer alternative 😊

[@michelleandrews9423]

How long do you have to let it cure before using cup

[@bahyaowensable]

THANK YOU FOR EXPLAINING THIS PRODUCT....EVERYONE else just show how to apply it!!!THANK YOU AGAIN!!!

[@emilyelizabeth6430]

Your videos are insanely helpful.. wow! and you respond to your questions with such detail. Yup! I'm subscribing!

[@MelissaCrafter]

Aww thanks so much 🥰 I’m here to help !

[@irism6865]

Hi, love your cups. If you have streaks how do you fix that?

[@melissapineda4948]

Thanks for the video, I love that you explained everything clear and straight to the point!!

[@ValeryNunez]

great video! can you use a heat gun to speed up the drying process?

[@vittovitto79]

did you try it also on ceramic or glass? Will it peel off or does it need a base coat? Thanks :)

[@ChanellV22]

I am so happy I came across your video! I just started using my cricut and I’m new to all of this but you’ve made it so simple and easy! Thanks so much! New subscriber ❤️

[@MelissaCrafter]

Yaaay! I’m glad I was able to help (: let me know if you have any questions!

[@zuleycadavila3446]

Hi Thank you for your video my question is how do you have to wait to cure?

[@MelissaCrafter]

You’re welcome! ☺️ the cup takes 30 days to fully cure but is ok for light use after 5-7 days. Following proper care instructions

[@shaakirasmikle2205]

have you ever used the brite tone on a double wall acrylic tumbler

[@MelissaCrafter]

I have. I don’t have a video on it but the process will be the same as a cold cup

[@Krysbadd]

Can this be done on the snow globe tumblers too?

[@AndosArtTips]

Do you think this process would work on a square acrylic cup?

[@lisaramirez2982]

Can you use modpoge dishwasher safe over this so you can put in the dishwasher

[@MelissaCrafter]

Unfortunately no.

[@tiffm7359]

Can I use this on ceramic mugs? And will that fit on the spin it?

[@savannahnaranjo9088]

Thank you so much! Did you sand the cup before the first coat?

[@MelissaCrafter]

You’re welcome 😊 Yes I sand with a high grit sanding. More like a light scuffle in circular motion around the logo.

[@savannahnaranjo9088]

@@MelissaCrafter wow thank you! I was scared it would mess up the vinyl or ruin it lol

[@kristysoares2689]

Whats the drying rack. Could I also leave it on the cup turner just not turning ?

[@irism6865]

Hi, can you use brite tone to seal the clear Starbucks tumbler? Thank you

[@PrettieDi]

Can I use this method on a jar made out of resin after it dries?

[@kms_hair305]

Thank you for this, I just ordered mine ❤️

[@MelissaCrafter]

Hello and thanks for watching 😊 let me know if you have any questions about it once you start using it !

[@donnamariehooper1585]

Hi can you use this for gin glasses i vinyl them but really want to seal them without the glasses looking dull and streaky if not this method any other ideas

[@karen_simeontribe]

It has to be dry under light away from any fans ?

[@dulcisbyaly]

Do you have any tips for correcting streaks/uneven coats?

[@MelissaCrafter]

You can sand your cup with 400 grit sanding paper then continue coating your cup with brite tone. But if your coats are streaky & uneven that means your coats are too thick & you are over working your cup. Coats should be added thin. & add your coat quickly and let the cup spin & self level.

[@dulcisbyaly]

@@MelissaCrafter Thanks so much! I love your channel ❤️

[@aprilvoeltz3712]

Can you use a taklon brush?

[@MelissaCrafter]

Definitely!

[@khyatikumar5266]

Hello ,I want to know is this temperature sensitive like resin ?

[@kayleighp4329]

Hi! Do I still need to seal the cup if I used permanent vinyl?

[@CookingWithParisRose]

Good morning ! Your video is super helpful ! Do we have to sand the Starbucks cup if we are no using glitter ?

[@MelissaCrafter]

Hi. Yes I always sand .

[@awilkaa2717]

this is great. i def dont want to use epoxy. will hot beverages make the britetone crack? or cold/cool drinks can only be used when using brite tone?

[@MelissaCrafter]

Thanks 😊 the cup on the video is a cold cup . I wouldn’t recommend using a hot drink in it. You could add hot drinks to stainless steels that have Brite tone though.

[@saial1456]

Thank you for sharing this I have tried it and failed its the weeding of that LV that gets me every time where did you get the image it looks bigger so maybe not so difficult to weed. can't wait to see your other video's

[@MelissaCrafter]

You’re welcome 😊 I purchased it off Etsy. Try putting the cricut to cut on custom . Then select holographic vinyl and put the cut pressure to more. That usually helps with weeding for me.

[@tiarajohnson7376]

Can brite tone be found in stores??

[@jessevasquez8548]

After sealing the cup can I glue rhinestones on top or would they fall off

[@MelissaCrafter]

Hello.. Ive never tried it but I've read that some people have has success with sealing cups with Brite Tone and adding rhinestones on top. They use liquid fusion to add the rhinestones to the cup.

[@dropdeadsandy]

Where did you get your cup spinner from ?

[@denisetwinkles]

Hi! Thank you for your video! What do you mean it takes 30 days to fully cure? Can I use/sell right after coating? I’m new to the whole cup world lol

[@MelissaCrafter]

Hello & thanks for watching. And no worries we were ALL once new to this lol.. Crystalac products take 30 days to fully cure meaning it will continue to harden within those 30 days. The cups are okay for light use after 5-7 days though :) Once I’m done with a cup I usually let it sit for a couple days before using or shipping it to its new owner. When shipping I like to wrap the cup in parchment paper and then bubble wrap before putting in a box that way it stays safe. I also add a note with cup care instructions. If you have any other questions, don’t hesitate to ask :)

[@denisetwinkles]

Melissa Crafter you’re awesome! Thank you so much!

[@leeannprice2165]

I do have a question about this. I use Brite tone on Magellan tumblers and I've noticed that it scratches off super easy. Does the 30 day curing time prevent it from scratching off?

[@rubyfdzz]

Is the brite tone flamable?

[@pleaseBELIZEme]

Hi, since it takes 30 days to fully cure, do you wait that long to give them to your customers?

[@MelissaCrafter]

After 5-7 days, the cups are okay for light use. After my last coat I hold the cup for 5-7 days and then ship it out. I first wrap the cup in parchment paper and then bubble wrap. I put it in a box and add proper care instructions that include a cure date.

[@karenpaul4594]

I just got my Brite Tone. question, did you just pour it straight form the quart into the bottle? No shaking or mixing of any sort? Just a straight pour? Thank ya :)

[@MelissaCrafter]

Yes I stir it up every time I refill my condiment bottle .

[@karenpaul4594]

@@MelissaCrafter Thank you

[@lisamarieroserobin]

Is there a way to make it matte?

[@alexandrahindinger5989]

Hi!! I know this is random but is it possible to make the glitter Chanel cup in the back with crystalac as well? I guess I’m confused on the vinyl applying removing and reapplying process I assume! Thank you 🙂

[@miayanice143]

Hi! Love all your videos! Do you need to prep the cup with anything before applying the Brite Tone with single layer vinyl and multi layered vinyl?

[@MelissaCrafter]

Hello & thanks so much ! You can give your cup a light sand with 400 grit sanding paper. Around the logos if you want to keep those on. Wash with soap and water. Air dry and then apply your vinyl & start coating. Hope this helps (:

[@miayanice143]

Thank you so much for replying! One more question, is that required for me to do that??? What happens if I don’t?

[@MelissaCrafter]

It’s not required. I’ve done some without sanding. The cups are fine. Its just recommended so that the brite tone has something to hold on to that has been scuffled a little.

[@idaliaramirez6375]

Hi thanks for sharing 😊. Can I use the brute tone on top of any rhinestones?

[@MelissaCrafter]

Hello & thanks for watching. I wouldn’t put brite tone on top of a rhinestone cup. I think if you use a good enough go clue that bonds to metal on a stainless steel you don’t need to seal the rhinestones. I’ve watched a couple videos and I don’t see people sealing them with anything. Hope this helps (:

[@points928]

Loved the video! Do you use any primer before the brite tone? Or anything after?

[@MelissaCrafter]

Thanks so much 😊 I don’t use a primer if I’m just adding a design. It is recommended to prep your cup by giving it a light sand with 400 grit sanding paper (around the logos) ... wash with soap and water.. add your design and start coating with brite tone

[@points928]

Melissa Crafter thank you so much!

[@Ari_gatcha_gamergirl]

from adding to the condiment container to cup do u have to shake it or it’s just ready to go

[@MelissaCrafter]

It’s ready to go. You can stir it a little before adding it to your condiment bottle if it’s been sitting for a while.. but it comes ready to use.

[@rsalgado03]

Hello! Thank for sharing this it was straight to the point! I’m not sure if you mentioned this in the video but is there a huge difference between 2 coats and 4 coats?

[@MelissaCrafter]

Hello and thanks for watching (: so yeah , there is a big difference from 2 to 4 coats. The first couple of coats are not really noticeable, I mean there’s a gloss but not enough. With brite tone you build up the gloss . So the more coats, the more glossy your cup will be. Hope this helps (:

[@roxannecordero2535]

@@MelissaCrafter Thanks for sharing your advice and experience. Question regarding the COATS. Above you mentioned the more coats you apply, the glossier the finish....however, my main concern is to simply SEAL the vinyl onto the cup. Do you think 2 coats would seal just as well?

[@MelissaCrafter]

Yes if you simply want to seal the design 2-3 coats will be good.

[@natalyr009]

Hi there can you use brite tone on the color changing Starbucks cups too?

[@MelissaCrafter]

Definitely. As long as it rigid plastic (:

[@Sandy-vp3mn]

Do you do anything to prep the cup before applying the clear coat. And do you sand or do anything between coats

[@MelissaCrafter]

Yes I sand with a high grit sanding. More like a light scuffle in circular motion around the logo. In between coats I spot sand if I feel any bumps on the cup .

[@cosmicsoulxx]

For this one did you prep the cup? Or no? Since you just added the vinyl on the cup

[@MelissaCrafter]

I didnt on this cup since I wasn't initially going to seal it...but when sealing you should definitely sand first. Sanding will scuff up your cup and give Brite Tone a good surface to adhere well too.. prepping the cup is the most important part of the cup making process.

[@sylviamorales6826]

Beautiful work. 💓

[@MelissaCrafter]

Thanks so much 🥰

[@jeanettepena7876]

Do you sand it during the process? Before adding the last coat?

[@MelissaCrafter]

I sand every three coats .

[@sharonescurra581]

Can I leave the cup on the turner? Would if I don’t have a drying rack?

[@MelissaCrafter]

you can definitely leave it on the turner. I usually leave mine on there unless I’m coating multiple cups at a time.

[@Wendy-fx3zn]

Hi! Do you have to use more bright tone than you would epoxy ?

[@MelissaCrafter]

In my opinion no. Brite tone is applied in thin coats. Only very little is needed for each coat.

[@doiretharreola5533]

OMG I love your videos I was thinkin about personalizing cups and I love how you do it. It works with stickers I want to use stickers.

[@ronisp3799]

Hello can you use this on a clear reusable acrylic tumbler like the double wall ones? Also is the smell strong ?

[@MelissaCrafter]

Hello! You can definitely use brite tone on acrylic tumblers. It does have a smell but not a strong smell.

[@aliciab.3398]

Did you sand prep this cup prior to adding vinyl? Do you have to sand after 3 layers when just applying vinyl?

[@MelissaCrafter]

Yes watch this video . I talk more about that here How to Seal a Starbucks Cup Using CRYSTALAC Brite Tone (EPOXY FREE) kzbin.info/www/bejne/q3bRc59meNGsbJY

[@MelissaCrafter]

Also this video How To Prep A Starbucks Cup For Crystalac Products kzbin.info/www/bejne/qZquhZqKg5mBmZY

[@monicamarie4532]

Hello if you sand does it have to be a 400 grit dry or wet sanding paper? I know they have dry and wet ones so I’m not sure if it matters or it doesn’t matter? Thank you for these helpful videos!!

[@MelissaCrafter]

I have both dry and wet sanding paper. When prepping my cup I usually wet sand. I’ve never noticed a difference between the two. Except that the wet sanding paper last longer when using them wet. They both sand the same when dry sanding between coats .

[@monicamarie4532]

Ok perfect thanks so much!

[@monicamarie4532]

When I sand the cup before applying anything just to make sure it doesn’t get any bubbles do I sand dry or wet.? I know you said dry sand between coats but before doing anything is it’s and drying or wet sanding? Because I just dry sanded a cup and it looked like scratches even after I soaped and water is that normal or am I doing something wrong?

[@MelissaCrafter]

Be sure to sand with a high grit sanding paper 400 or higher.. with a light hand. I usually like to do circular motions when sanding . You still will have some scratches but once you add the brite tone they won’t be noticeable.

[@stephanieaburto7190]

Can Brite tone be used on mugs and regular cups as well to seal them?

[@MelissaCrafter]

Yes!

[@PoconoPam]

Thanks for sharing this Melissa!

[@PG-ug1dm]

Love this video! Can we use removable vynil and then seal with that?

[@MelissaCrafter]

thanks so much :) & yes you can !

[@PG-ug1dm]

Ok thank you for replying back 😊

[@gonzogarcia3297]

After it’s fully cured would it be safe to put it in the dishwasher?

[@MelissaCrafter]

Hello & thanks for watching (: unfortunately, the cups will not be dishwasher safe. Crystalac recommends hand washing only with soap and water. Submitting tumblers to extreme heat is not recommended.

[@yeseniaobregon1500]

Where do you buy the brite tone? And is it the same as polyurethane?

[@MelissaCrafter]

You can purchase the brite tone from the crystalac company. Here’s the link for it thecrystalacstore.com/collections/tumbler-products/products/brite-tone-instrument-finish. It’s also in my video description. The polyurethane.. if your talking as bout the extreme protection... is a little more thinner. I know a lot of people use it to start up the gloss or to glitter. The brite tone is higher in solids so you can build up the gloss quicker .

[@evelyncastillo3767]

Hi.. loved your video! Questions.. do you sand you cups before pouring the brite tone? Also, how.many coats do u put?

[@MelissaCrafter]

Thanks so much! I do sand lightly. More like a scuffle with a high grit sanding paper. 400 or 600 grit. For a cup with just vinyl & no glitter it’s usually about 5-6 coats. Hope this helps (:

[@nayelyzamora8405]

Can the Brite tone be use for molds as well?

[@MelissaCrafter]

Not for molds. Molds are too deep and pouring brite tone in them will never dry. Acrylic blanks can be used with brite tone though.

[@nayelyzamora8405]

Melissa Crafter thank you

[@yurialvarado242]

Hello! I started to use Crystalac after watching your video and I was wondering how soon after adding the last layer of crystalac and letting it dry for a full day do you give your clients their cup? I had a cup that the crystalac started to peel from the bottom rim. Thank you so much for doing this video. Your videos are so helpful.

[@MelissaCrafter]

I wait as long as I can . Usually 5-7 days. I also add care instructions with a cure date on it .

[@yurialvarado242]

Melissa Crafter Thank you so much for responding.

[@LeonaOcean]

@@MelissaCrafter hello Melissa can you please write care instructions? what do you mean when you say ''free for light use after 5-7 days''? thank you in advance :)

[@MelissaCrafter]

Hello . So brite tone has a 30 day cure time . The cup will continue to harden within the first 30 days. After 5-7 days ... the cup is okay for light use... of course following proper care instructions. Here are the care instructions.. TUMBLER CARE INSTRUCTIONS HAND WASH ONLY DRY IMMEDIATELY DO NOT SOAK NOT MICROWAVE SAFE NOT DISHWASHER SAFE Please handle with care. Dropping this tumbler may cause it to crack. Every effort was made to ensure this tumbler is perfect! Due to the handmade nature, minor imperfections are sometimes unavoidable. This is a TOXIC FREE clear coat that will continue to harden over the first 30 days! Please be sure to follow all care instructions to ensure a long life for your tumbler. Thank you for your support! BUSINESS NAME WEBSITE Fully Cured: ____________________________

[@hernandezfam1071]

@@MelissaCrafter Hello, can you still drink out of it or use it for an ice beverage while it’s still curing?

[@octaviarayana8653]

Does the Brite tone start to cure when it’s in the squeeze bottle?

[@MelissaCrafter]

No . You do have to remember to always close it and not leave the cap off.

[@octaviarayana8653]

Melissa Crafter Okay thanks so much for the fast response and help

[@jennifermassey8911]

Great video! I wanted to ask do you use both the Brite tone clear gloss and the Polyurethane on your cups?

[@MelissaCrafter]

I use mostly brite tone. I would use the polyurethane when I had it just to use it since I had ordered it but I haven’t ordered anymore and use just brite tone 😊

[@jennifermassey8911]

Hi Melissa. Does the Bright tone yellow? Thank you

[@jessicavillagomez2620]

Can you use this also for color changing cups ? I’m guessing If is clear it will have the same results ?

[@MelissaCrafter]

You definitely can!

[@Beautyinastruggle]

Thank You For Sharing this Video I Purchased 5 Cold Cups StarBucks cups They Are Not Brite Toned So I Am Going To Do It My Self I Greatly Appreciate The Video

[@amandasanchez8037]

New to this ... I know that with epoxy you have to wear a mask is brite tone do you have to wear one also ?

[@MelissaCrafter]

You don’t. It’s water based & toxic free so no protective gear is necessary 😊

[@juliannakauihana1759]

Aloha Iʻm new to this I have colorchanging cups will the brighttone stop the cup from changing colors

[@MelissaCrafter]

Hello. I’ve sealed many color changing cups & it doesn’t interfere with the color changing (:

[@juliannakauihana1759]

Melissa Crafter thank you girl !

[@3lsa19]

Would you know why the crystalac is not leveling on glass is wavy even after I used a small amount of it. Not over coating I'm on coat 4

[@lizpatino7836]

I have grand finally. Can I used this to steal my vinyl?

[@MelissaCrafter]

Yes !

[@carolinesilva8733]

Quick question, I use the acrylic cups from skinny tumbler. How would I coat those? Do i need to sand them?

[@MelissaCrafter]

For acrylic cups I don’t sand. I just automatically start with glittering or adding vinyl & brite tone .

[@eidysoza3973]

Hi I’m just starting to use brite tone now I want a clear cup like the one you did in this video. Now can I add the decal on the cup then add brite tone?

[@MelissaCrafter]

First your going to want to prep the cup. Sand lightly using 400 grit sanding paper around the logos. Wash... then add your decal. After the decal you can start coating with brite Tone.

[@eidysoza3973]

Hi I need your help I did what you advised I scuff with a 400 sand paper wash dry and the added my decal, but now there are sides that are coming up not staying on the cup. If I apply BT what will happen . Please help

[@MelissaCrafter]

The sides of the decal?

[@ednab.9001]

Thank you for sharing.... I’m just looking to make projects for family and gifts for friends... l was so lost! Thanks! 💕💕💕💕

[@MelissaCrafter]

You are so welcome!

[@vrodram828]

Hi just about how many cups do you get out of a container that size?

[@MelissaCrafter]

Hello (: Somewhere around 20-24 cups with the quart size container.

[@pinnacle_karma13]

Does this work on the color changing cups without interfering with the color changing process?

[@MelissaCrafter]

Yes I recently sealed a design on a color changing cup & it did not interfere with the color changing process on the cup.

[@pinnacle_karma13]

Melissa Crafter awesome! Thank you!

[@thaliyah_thai]

Hi do I have to buy Brite tone and Polyurethane?

[@MelissaCrafter]

I use mainly brite tone. The polyurethane can be used to glitter and to do the first couple coats to start building up a gloss. You will then have to switch to brite tone to finish off your cup. People use it that way since it’s a bit cheaper. You can use just brite tone.

[@thesongboyz5333]

hi , Do you sand between coats ??

[@MelissaCrafter]

hello. yes lightly sand with a high grit sanding paper (400 or 600 grit) every 3 coats

[@SandraGarcia-oi7el]

Do you just use brite tone high solids top coat clear gloss or do you mix it with another product, I saw you listed another one in the description

[@MelissaCrafter]

just brite tone! the other products are products I use often

[@tjhogan4492]

Will the brite tone crack?

[@MelissaCrafter]

if proper care instructions are followed, it will not.

[@taygansepulveda45]

Will this work on the color changing cups ?

[@MelissaCrafter]

Definitely!

[@aikalyka8758]

Do you prefer brite tone than polycryclic?

[@MelissaCrafter]

I’ve never used polycyclic. After doing research I found that polycyclic is very low in solids.. meaning building a gloss will be nearly impossible.

[@85patriciaj]

Do you have issues with the crystalac peeling off your starbucks cups

[@MelissaCrafter]

I don’t. What’s your cup process like?

[@85patriciaj]

@@MelissaCrafter at first I didn't sand the cups. Now I'm sanding the cups, vinyl, BT about 4 to 5 layers. But they peel at the bottom and at the top.

[@leaalvarez9804]

How long until after you've sealed it is safe to use?

[@MelissaCrafter]

5-7 days . Of course following proper care instructions.

[@keshiamarlatt4737]

So you don't have to use gloves with brite tone like u do with epoxy? And it's not sticky like it?

[@MelissaCrafter]

Its not sticky like epoxy. I wash my hands right after and it washes off quickly and easily.

[@karenleon3916]

Hi! I came across your video after researching how to seal my vinyl on glass cups. Would this work for them? Also, you mentioned it takes 30 days to fully cure... would you recommend holding off on selling the completed product (cup) until after the 30 days? I would just like to make sure that they do not get damaged during shipping, etc. :) Thank you so much!

[@MelissaCrafter]

Yes, I have used brite tone on glass. Also the same company that makes brite tone, came out with another top coat called grand finale, that can also be used on glass. I have videos using both on glass cups :)

[@Les.A.]

Thanks for the video! Gonna purchase some Britr Tone. But thinking of buying the matte finish 🤔

[@MelissaCrafter]

Hello and thanks for watching. I also want to try the matte finish. I’ll be ordering some soon :)

[@Les.A.]

Would love to see a video of you trying it out!

[@anissaturingan9505]

I love this video! I have recently tried using resin and it’s just so difficult. I want to seal clear acrylic keychains with an intricate font and they’re small. Would this work for it?

[@MelissaCrafter]

Yes it will 😊 just do thin coats until the font is covered

[@kaylaveeh]

Is brite tone like triple thick?

[@MelissaCrafter]

No. Brite Tone is higher in solids... allowing you build a gloss.

[@lanette65]

quick question? im new to crystalac what can u use for bubbles? or do u get any?

[@MelissaCrafter]

If your getting bubbles chances are the coat is a bit too thick. Try thinning the coat and the bubbles, if any, will pop will spinning & self level.

[@jeevansivia267]

hi does this make it dishwasher safe?

[@MelissaCrafter]

Unfortunately not. After applying brite tone, only hand washing is recommended.

[@danishabaybee93]

Hello My question is with brite tone does it seal the vinyl on the cup so it's safe to wash the cup I'm trying to get into crafting and I wanna learn as much as I can please let me know thank you 🙏🏾

[@MelissaCrafter]

Yes. Hand wash only. Not dishwasher safe.

[@tpbby21]

all you used was brite tone, no other sealer? I am so thankful for this video!! I have had brite tone for 6 months and have been scared to use it.

[@MelissaCrafter]

Yes brite tone is all I used on this cup (: even when I glitter cups, I seal the glitter with e6000 spray from Micheals & then just use brite tone to add that glossy finish. I have a video where I glitter and add brite tone to a cup if you would like to watch :) all I’ve ever purchased from crystalac is brite tone. Don’t be scared to use it , just go for it :) I’m sure you’ll do great & don’t hesitate to ask if you have any questions :) thanks for watching!

[@sparky10901]

You should look at vinyl shield instead of this. You just cut the vinyl shield at a small offset of your design, apply it to the vinyl as if you were layering it, and then apply it to the cup. It's dishwasher proof and makes the process super fast.

[@MelissaCrafter]

Thanks for the suggestion. I will have to check it out :)

[@CraftyMimi19]

Can you use this on metal cups too?

[@MelissaCrafter]

Yes definitely. I have videos using stainless steel cups 😊

[@paulinemanglona1724]

Hi, I added cricut adhesive foil and holographic vinyl to my starbucks tumbler and was wondering what's the best way to seal the vinyl? I'm afraid to use it because the vinyl doesn't seem to stick very well. Also, I wiped the tumbler with alcohol before applying the vinyl but did not sand it. I appreciate your help.

[@MelissaCrafter]

you can coat with just brite tone. a light sand is recommended... then adding coats until you’re satisfied with the gloss finish. always waiting 3-4 hours between coats (:

[@jociimarie91]

Hi!! How do I keep bubbles from happening?

[@VeronicaGarcia-nj6vp]

Do you have to sand the cup before applying brite tone?

[@MelissaCrafter]

Yes, here is my video on how to prep starbucks cups :) kzbin.info/www/bejne/qZquhZqKg5mBmZY

[@lilbumnbum]

Hi there! Love the video! Really helpful! What type of care instructions do you provide to the client in terms of washing?

[@MelissaCrafter]

Thanks so much ! Here’s the info I add in my care instruction cards. Hope it helps (: TUMBLER CARE INSTRUCTIONS HAND WASH ONLY DRY IMMEDIATELY DO NOT SOAK NOT MICROWAVE SAFE NOT DISHWASHER SAFE Please handle with care. Dropping this tumbler may cause it to crack. Every effort was made to ensure this tumbler is perfect! Due to the handmade nature, minor imperfections are sometimes unavoidable. This is a TOXIC FREE clear coat that will continue to harden over the first 30 days! Please be sure to follow all care instructions to ensure a long life for your tumbler. Thank you for your support! BUSINESS NAME WEBSITE Fully Cured: ____________________________

[@daniellad5518]

@@MelissaCrafter how long does it take to cure? And what if you sell it to them before it’s cured?

[@analedesma9973]

Question...... I’m inpatient, can I dry it with a hairdryer instead of letting dry by itself?

[@MelissaCrafter]

No .. it will not dry properly & also will cause lint fly onto your cup .

[@ayeesandraful]

Can you please share what vinyl you used for LV Starbucks cup and where I can purchase? :)

[@MelissaCrafter]

I purchased it on Etsy . Just search lv wrap for Starbucks cup 😊

[@Andy-hi6zt]

do you need to sand like you do with epoxy? I am mostly looking for ways to seal vinyl.

[@MelissaCrafter]

Give them a light sand with a high grit sanding paper (400 grit is what I use).. avoid the Starbucks logos if you want to keep those on your cup. Wash with soap and water and air dry. Hope this helps (:

[@Andy-hi6zt]

Melissa Crafter so do you sand before putting the brite tone? Or during the layers of brite tone?

[@MelissaCrafter]

You can give it a light sand around the Starbucks logos, apply your vinyl & start coating . If you add glitter you can sand every 3 coats