Mingzhu DG2813 to Miyota 8215 wrist watch movement replacement IMPOSSIBLE?

In this episode, I'll replace a wristwatch movement from Mingzhu DG2813 with a watch movement from Miyota 8215. In this way, I will build my own watch in the diver style. The Mingzhu DG2813 watch movement you can find in many homages watches mostly without the brand name. Miyota 8215 wrists watch movement is well-known and reliable, still used by many watch brands even microbrands.
Miyota 8215 replacement:
- Aliexpress: s.click.aliexp...
- eBay: ebay.us/LV9JQK
Watches with Miyota movement:
- Starking: s.click.aliexp...
- Corgeut: s.click.aliexp...
Diver watch on eBay: ebay.us/bKZZQP
Finger cots:
- Amazon: amzn.to/34N1V3Z
- eBay: ebay.us/TiKlQP
🌳 Check this watch collector logbook:
** Men’s Watch Record Book: amzn.to/34jqYuC
🔵 New here? Liked the content? Subscribe ticking WATCH: / @tickingwatch
🔵 Follow me on Instagram / tickingwatch
🔴 Watch movement assembly playlist (in EN and PL): • Soviet vintage wristwa...
🔵 Website (in Polish): www.tickingwatc...
Music is from www.youtube.co...
Please note that some of the links above are affiliate links from which I earn a small commission when you will make a purchase. Use them as a starting point in finding the best offer for you and it will be a great support to develop the channel! Thanks, because I really appreciate it 😀
#ticking_WATCH #watchmovementreplacement​ #Miyota8205

[@tickingWATCH]

🔴 If you like watch services this video might be also interesting for you: kzbin.info/www/bejne/qIqsiYKtjaZjgZI

[@peterwong1531]

Thank you very much...Greeting and stay safe from Singapore.

[@peterwong1531]

Just ordered watch case and Miyota 8215 movement from China just to build a watch. After watching your video I think I have to confident to make a watch. Btw, this is just my hobby...Thank you.

[@tickingWATCH]

The pleasure is mine Peter Wong! Good luck 😀

[@rbmwiv]

Thanks again for this video I just swapped out the 8212 to the 8215 in a Datejust rep and turned out excellent and keeps much better time. I bought my movement new and because of your stem being short I ordered a extra stem that was long so I was able to get mine just right. Thanks for the video it showed me any possible issues and I was able to compensate for it by getting the longer stem. I used my belt sander to get my retention ring to fit made quick work of it.

[@tickingWATCH]

Thanks, I really appreciate it

[@khan1z9]

where do u order stems etc from?

[@5naxalotl]

great video. nice to see someone explaining these cheap movement swaps ... not so difficult, but people need to see it done

[@tickingWATCH]

Thanks, I really appreciate it and I hope this video will be beneficial for many viewers 😀

[@johnathonmullis4234]

Excellent video. I’m going to try this out. I’m glad to see that so many people are buying replicas and replacing the movement when they have problems with them. The genuine manufacturers really took a huge shit on their customers and let their authorized dealers have their way with them. Charging customers $10-$20k more than retail on already overpriced products is unconscionable. I’ll never buy anything but replicas now. I dont mind swapping out the movement every so often because its better than paying $300 to have a genuine serviced.

[@tickingWATCH]

Thank you for sharing 👍

[@Walter_Sobchak_43]

I was looking for videos on how to swap out my watch face on a DG2813 and this helped a lot! Thank you!

[@tickingWATCH]

I'm really glad that it is helpful. 😀

[@josephstratti52]

Clean and oil that DG2813 and it will work fine.I have one that was given for free as stopping occasionally,after a strip clean and oil has proven to be a good reliable movement that just needed a clean and oil.

[@tickingWATCH]

Thanks for your advice I really appreciate it

[@rons7555]

Well done !!! Love the movements and love the watches. Thanks for this video, it was very helpful as I’m trying to build a GMT ETA 2836, 4 hands watch. And I have to fit it into a similar case and plastic spacer movement ring as well. Cheers mate. Thank you for this video.

[@tickingWATCH]

You're welcome @rons7555 , I'm really glad that you like it 😀

[@462904]

Brilliant job my man, a touch of genius better movement now watch is worth more great great great love your vids keep em coming pure skill well done brother 👏🏻👏🏻👏🏻👏🏻👍🏻👍🏻👍🏻👍🏻

[@tickingWATCH]

Thanks 😀

[@Make_SPQR_Great_Again]

Very helpful and informative video!! Your camera work is also superb. Now that I watched this video, I may start my first mod with Tiger Concept!

[@tickingWATCH]

I'm really glad that you like it and good luck with your Tiger 😀

[@itsallrobbish]

Superb video, thank you very much. I just wanted to know how to remove the stem from a mingzhu movement, but the whole video was excellent! Subscribed. This has given me a bit more confidence. Now, I need to swap the 7S26 In my SKX007 with my newly purchased NH36A and signed crown.

[@tickingWATCH]

👍

[@darrelwillman3158]

Nice video! I've also bought a 'homage' watch. Very nice quality with a sterile dial (diver). It came with a DG 3804-3 GMT and I'm thinking of changing it to Miyota 8215 as well-- although I may have to also replace the dial. It appears the DG2813/3804, ETA 2836 and Miyota 8205/8215 are interchangeable.

[@tickingWATCH]

I think with ETA the dials are not interchangeable, good luck with your watch 😀

[@thilau5715]

Exactly what I was looking for. Thank you for all these details!

[@tickingWATCH]

You're welcome Thilau 57. I'm really glad that it was helpfull.

[@mikebutler3846]

OMG…building a watch for my brother, need some info about the spacer, found your channel and am using the same dial! Good video! Subbed!

[@tickingWATCH]

I'm glad that I could help with this video 😀

[@jamesdoyle8975]

Great vid ! I usually build my spacers from brass and clamp down automatic movements if you go the extra mile on a sport watch or diver. But I haven’t came across a dg8213 lately and didn’t know it was a compatible with miyota 8200 series …..Awesome

[@tickingWATCH]

The pleasure is mine James Doyle! 😀

[@echochambers8418]

I find it interesting that a Watch brand,would use an exhibition Case back that says “Miyota Co” instead of slapping a “Starking”Rotor on it.The 8215 is a workhorse and can last 20+ years,but it isn’t beautiful.

[@tickingWATCH]

Thanks for your opinion, I really appreciate it

[@tatarugabriel4328]

Awesome video. Constructive criticism here: next time use less music, and not so loud. We're good listening to you😁

[@tickingWATCH]

Thanks for your advice I really appreciate it 😀 and some changes with the music also can be done 👍

[@user-Kawauky]

Good work. I have a problem with the plastic ring that seals the mechanism. 8215, but like you it doesn't fit. I can't figure out how to fix it.

[@tickingWATCH]

What do you exactly mean te rubber ring that seals the case? Or other part...

[@shkd4504]

The biggest problem with the 2813 movement is that the date system is often damaged because the spring is very fragile, but this movement is also the cheapest movement in the Chinese market, no one cares

[@tickingWATCH]

Thanks for your advice I really appreciate it 😀

[@Enoch-Gnosis]

I’m going to try this mod! In what position can you remove the winding stem ? The time setting position?

[@tickingWATCH]

By this movement actually doesn't matter but I always set the winding stem in the time stetting position 😀

[@Enoch-Gnosis]

@@tickingWATCHhow’s the performance of this movement 3 years later ?

[@pshiva1215]

Thank you so much for making & sharing this video. Subscribed

[@tickingWATCH]

Thanks, I really appreciate it 😆

[@burdel75]

Hi ty for your videos! A question: I have a pd1662 with dg5833 can i replace it with a myota 8215? Plug and play mod? Ty again!

[@tickingWATCH]

This one has GMT complication therefore to replace it with 8215 is not possible 😐

[@burdel75]

I dont care to loose GMT function i this case i could? Or only nh34?

[@tickingWATCH]

In this case should be ok

[@ShadowWalker78]

So,did you try the replacement? I want to do the exact same thing with the exact same watch.

[@rochester212]

Great video.

[@tickingWATCH]

Thanks 😀

[@shkd4504]

In fact, the movement you disassembled is not the real MINGZHU2813, it is DAN DONG2813, it is a replica of MINGZHU2813, worse quality and reliability

[@tickingWATCH]

Thanks for your opinion, today is hard to find reliable information on the Internet.

[@shkd4504]

@@tickingWATCH It's not your problem. They are very close. Many Chinese watch maintainers can't tell which is "Mingzhu" and which is "Dandong" In fact, there are six factories that produce this kind of movement. They are very close and different. "Mingzhu" is the best one, and the others are very bad

[@shkd4504]

@@tickingWATCH If you have any questions about the Chinese movement, I'd be happy to help

[@tickingWATCH]

@@shkd4504 thank you for support

[@tygawyga5411]

How do we know the difference bro 😢

[@DonCacomixtle]

nice vid. my question is, is really Mingzhu DG2813 that bad? i mean, i hate how noisy Miyota 8215 is and if quality is about the same i see no reason to change it. Thank you.

[@tickingWATCH]

DG 2813 is good but there is a general opinion that Miyota is better 🙂

[@intezamable]

thx for confirming that dg2813 are not lubrictated

[@tickingWATCH]

It is always a good idea to service them because you actually do not know how long thy where laying in a warehouse. 😀

[@hirantkasapoglu4471]

Dzien dobry. Djinkuje bardzo, bardzo finy prodnik mekanika video.

[@gartmorn]

Do you think the Miyota movement in the Starking is really made in Japan or is it a chinese copy? I love your videos. Keep them coming! Your english is really improving with each video! Great work.

[@tickingWATCH]

Probably made in China but with better quality control. Thanks, I really appreciate it 😀

[@jlayaldj]

Good video! Can you tell me in what position to put the seatpost to remove it and not have problems when putting it back? Thank you

[@tickingWATCH]

I am always in the second position or fully pulled out but it shouldn't have any difference 😀

[@raednammouz1202]

best video ever ! thx a lot

[@tickingWATCH]

Thanks, I really appreciate it

[@Sr.D]

Great, I've got a Parnis Yatchmaster homage, but I'm not sure if it comes with a miyota or the dg2813…I think it's the latest one cause has hacking, at first I thought it was the miyota for the sound of the rotor but since has hacking it should be the mingzhu, it feels extrange sometimes when winding the movement so maybe I will replace it with the miyota in the future

[@tickingWATCH]

The only think to check it and be sure is to see inside 😀

[@Sr.D]

@@tickingWATCH I already checked, and it's a dg2813 indeed, no complaints for now, it looks solid and runs ok, but if sometime fails I will use your video for replacing it with a Miyota 8 series

[@bluesmaster9896]

Is there anything on the market that would replace a 3035 movement or convert a 3135 to fit the 1600 case thanks the 3035 is 6.35 mm and 3135 is 6mm a spacer ring would sort out the height but the hands may be a problem ?

[@tickingWATCH]

I saw sam clones on aliexpress, Starts with links in the description down below

[@ccooper8785]

HMmmm , would replacing with a VH31 mecaquartz have worked? I am no longer willing to put up with the downsides of mechanical, especially automatic, movements.

[@tickingWATCH]

can be but hand have to be replaced either 😀

[@gerardoar2368]

excellent video new subscriber, I have a watch with dg3804 gmt and I want to change it for a better movement which would be the most convenient in advance I thank you very much for your answer

[@tickingWATCH]

Miyota 8215 but it does not have GMT function

[@thephoenixfoundation8095]

That's amazing, I'm planning to recase my corgeut black bay type watch, as the crown stripped after very little use, and I can't find parts, so I found a case but I'm nervous to do it. Help !!! Lol

[@tickingWATCH]

You're welcome ThePhoenixFoundation 80 and good luck with your project.

[@guillermocalzada9392]

Good night ¿Why did you take out the rotor? From Mexico city. Thank you

[@tickingWATCH]

Hi, it is easier to work but if don't want it can stay 😀

[@DancingTramp]

How do you insert the tension ring properly and without the rotor touching it? Is there a specific orientation?

[@tickingWATCH]

Hi EA. It isn't difficult. You have to pay attention only to the gap for the winding stem 😀

[@twistedgreymatter]

The spec sheets I am referencing show the dial pin locations in different areas on each movement yet you had no issues?

[@tickingWATCH]

In my was the same, did you compare the same calibers?

[@RakeshSharma-cy2dn]

Mere pass titan 7100 day and date wala watch hai ulta watch kyun chal rah hai kaise thik kare

[@tickingWATCH]

Hard to say, can you provide me more information

[@mirosaw4529]

Bardzo fajne masz te filmy. Tylko ja mam inny problem mam sam mechanizm miyoty8215 ,a nie mam takiego pierścienia dystansującego pod tarczę. Masz jakiś link gdzie to można kupić ?

[@tickingWATCH]

Kupić raczej ciężko, jak już to z używanego mechanizmu, można popróbować na AliExpress albo eBay. można też coś podkleić na mechanizm tak aby zrobić dystans ok 0,5mm

[@24hourgmtchannel64]

So the hand hole diamiter are the same? I seen a few who had to broach the hole slightly larger.

[@tickingWATCH]

as far as I know they are different

[@macaveli22]

Have a fake sub. it works, but when I pull the crown out it won't adjust the time so I can't set to the correct time, any suggestions for me to do a diy

[@tickingWATCH]

disassembly and checking the keyless works

[@cossied01]

Hand alignment was out by about 20 degrees ?

[@tickingWATCH]

Might be, have to check it 😀

[@neilcampbell4833]

Why do some 2813 movements have a pink wheel and others gold. I have a gold center wheel and it doesn't even have any markings on it like DG or the crown shape to tell me where it was made.

[@tickingWATCH]

I think the color is here not important the point is to make the parts very accurate :)

[@joanc120]

you put a plastic to not scratch the dial when taking the hands off but then you pick them up with metal tweezers... better to use rodico

[@tickingWATCH]

Thanks for your advice good idea 👍

[@danieledonadio]

congratulations for the video, I have a question for you, if I want, can I use the spacer ring of the dial mounted on the DG 2813 in the Myota 8215? Fits?

[@tickingWATCH]

You're welcome @danieledonadio. With the spacer ring should be ok, I even using the same in my video ...

[@danieledonadio]

@@tickingWATCHok, thanks! 😊

[@gmotionedc5412]

Awesome. Very delicate

[@tickingWATCH]

😀

[@keithwear6226]

Excellent how to! I'm in the process of replacing a broken movement on a Ladies replica datejust. This has helped. Question is? How much pressure do you on the seconds hand when reinstalling. Mine keeps popping out? Thanks.

[@tickingWATCH]

😀 Hard to answer, rather you need to feel it, the pressure should be enough to keep the second hand on the pivot. When still you has problem mayby the hole in the tube is too small. You can use a pin but here again feeling. 👍

[@andreibreusov2059]

Very impressive. However, there is one thing I do not understand. Why did not you buy Miyota 8212 movement separately? Why buy STARKING watch and take the movement out instead ?

[@tickingWATCH]

Thanks. It was just experiment, of course you can buy movement separately.

[@eric146999]

Great video very educational but I think it personally would be a waste of time to take out the 2813 movement and putting in a miota movement both of these movements are very inexpensive but I'm sure you did it just for the video thank you very much great job

[@tickingWATCH]

Thank you, yes this video was for fan to show that this both movement are changeable

[@bc454irocz89]

@@tickingWATCH which one is better

[@tickingWATCH]

@@bc454irocz89 in my opinion Miyota, but is also more expensive

[@bc454irocz89]

@@tickingWATCH thanks for the reply. Cadisen equips both for same price in the watch I'm looking at. Tho the chinese movement has some nice machining on that model. I've heard miyota doesnt hack tho?

[@harket7578]

Great video Can you make video nh35 to quartz movement? Thank you

[@tickingWATCH]

Thanks! I'm really glad that you like it. Never done such project before, will see 😀

[@QZDog123]

Good video, thanks! 👍🏼

[@tickingWATCH]

Thanks, I really appreciate that you like it 😀

[@SHADOWDENNIS]

Which movement can i replace my 2813? I have 40mm submariner homage i want to put in something high beat like 2824? Or 2836 is it possible?

[@tickingWATCH]

Hi, directly you can use Miyota 8215 or ST16, but if you prefer 2824 more, you have to replace hands and dial. Greetings from Silesia 😀

[@yossrymansour5287]

Good job

[@tickingWATCH]

You're welcome Yossry Mansour

[@brian91145]

I have a Gmt 2 master rep. Can I do this exact process to change the 2813 movement?

[@tickingWATCH]

Miyota 8515 does not come with GMT so unfortunately you can't

[@dunboozin]

Will the seiko NH35 fit into the Chinese homage watch.

[@tickingWATCH]

Yes, I even made a video about kzbin.info/www/bejne/p6mrno2He96IapY

[@FirmBelieversFtL]

how are you taking the hands off when the second hand is moving?

[@tickingWATCH]

Hi, that is quite simple, and in any case goes in the same why, see here kzbin.infoMg6tvHUjjkw?feature=share

[@julianrafalko313]

I have the MG 2813 in a Thermidor watch for about eight years and it works fine, and stutters less than the Miyota 8215.

[@tickingWATCH]

👍

[@Marshal77]

How can the dial fit, Miyota8215 should have different dial feet position than DG2813, almost 5min difference?

[@tickingWATCH]

What can I say there in my pice there was no difference. 😀

[@tickingWATCH]

PS: some people say that movements that are sold as 8205 (or 8215) are in fact 8200 anyway these movements from Ali (or eBay) from China have the same alignment with DG2813 and even DG3804 for dial feet, also hands fits. Done this a few times 😀

[@BIKE-PLUS]

Fajny materiał. Pozdrawiam

[@tickingWATCH]

Fajnie, że się podoba, dzięki 😀

[@aliabou-ali3167]

Question: is watch hands miyota movement work as the same as nh35 ?

[@tickingWATCH]

Unfortunately not, cannon pinion and hour wheel have different diameter

[@keithclemons4154]

Hi, Did u cut the feet off the black dial?? You put the black dial down and it’s fits perfectly and u tighten the face screws…what are u tightening to?? Thx

[@tickingWATCH]

Hi, this dial fits because Miyota and DG2813 have the same alignment 😀

[@jesusyeshuaelelyonelshadai6295]

Great video

[@tickingWATCH]

I'm really glad that you like it 😀

[@tanghho]

can you upgrade from 2813 to 9015

[@tickingWATCH]

Unfortunately not the movement is different

[@RakeshSharma-cy2dn]

Balance ke taal ko kaise thik kare

[@tickingWATCH]

There are some videos about that on KZbin

[@PILATUS1968]

is not a steam its a stem

[@tickingWATCH]

Thanks for your advice I really appreciate it

[@briw4647]

I've heard a genuine dg movement is better than the miyota . Especially as tge miyota has no hacking feature.

[@tickingWATCH]

hmm interesting 😀

[@briw4647]

@ticking WATCH however, if I wanted to replace a 8215 movement now, I'd put in an 8135 instead . Much quieter, hacking and smoother movement. Coupled with 60 hours of stored power in the spring.

[@joanc120]

Cups on your fingers (+) but laying the movement on that cloth that looks like releasing lots of fibres (-)

[@tickingWATCH]

Thanks for the advice 👍 and comment

[@juanrafaeltosado1812]

HELLO' SEBASTIAN DO YOU SERVICES 2813& 3804 ??? THE PURPOSE IS TO PUT THE LID'S OF BOTH MOVEMENTS !!! ARE THE SAME" I SPENT SEVERAL HOURS & HOURS AND FAILED... DO YOU HAVE TECHNIQUES TO CLOSE AT ONCE ??? THANKS, RALPH.

[@tickingWATCH]

It is difficult indeed. I always start with one wheel, second or third wheel and finish with the escape wheel 😀 of course training is here the key.

[@juanrafaeltosado1812]

OK THANKS, THE BEST BET ( SEAGULL GMT OR SELLITA' ) 330 TO KEEP IT ALIVE . { Also new GMT, movement come in to town "SEIKO GMT" I HOPE 11,1/2 LIGNE} that solve many night mare !!!!🙏.

[@mcrispi2963]

Hi! I have a 2813, keeps good time. When I manually wind it to give it a kick start, the winding is not smooth, very rough. Does this sound fixable or the possibility of a movement change?

[@tickingWATCH]

That's normal. Miyota gives similar sound so when it has good time keep using it

[@mcrispi2963]

@@tickingWATCH I appreciate your feedback, Thanks

[@cke11y]

Thanks for the video, are you aware of a better replacement for the 8213 movement ?

[@tickingWATCH]

Yes shown in this video, Miyota 😀

[@AnonAnonAnon]

Hi, I found an old watch dial in my granddads shed. No watch movement or case, just a dial, and its in good condition, probably dated from the 1950s. How would I match a watch movement to it?

[@tickingWATCH]

You should start with checking dial feet alignment, also a good idea would be to check what movement was installed in this watch according to the brand name that is written on it in general not an easy path, even 0,1 mm difference make it impossible to install on the movement.

[@kurttevan]

Is dg2813 a clone of 8215? And wgats the difference?

[@tickingWATCH]

Not really, the part rather are not interchangeable 😀

[@albertohernandez4921]

Are the hands of 2813 compatible with miyota 8214?

[@tickingWATCH]

Yes they are 👍

[@cirealreviews1776]

Which would be a better option between the Chinese DH2813 vs Miyota for a homage?

[@tickingWATCH]

Of course Miyota would be better in my opinion

[@bc454irocz89]

I think the mingzhu us prettier tho

[@hammadsaeedlodhi]

i have invicta quartz watch dial size 44-45 mm and need to put automatic movement. is it ok if i can used 8015 or 8213. Please advise

[@tickingWATCH]

If the case fits is ok, the only thing the dial feet will not match with the new movement, second movement ring that holds the movement in place, you have to find something for that. Good luck with your project 😀

[@shkd4504]

I have repaired many 2813 movements, they are almost impossible to repair, poor material, when one part is damaged, other parts will soon be damaged, so many Chinese watch repairers will replace the entire movement instead of replacing the damaged parts

[@tickingWATCH]

Thanks for your advice I really appreciate it 😀

[@user-yo6dg2bd7k]

it's very interesting! I have a watch with a2813 GMT. Can I replace from a2813 GMT to miyota 8215？

[@tickingWATCH]

Hi you can but then without GMT 😀

[@fajrifajri8299]

Miyota 8205 can replace with other movement?

[@tickingWATCH]

The another one can be Seagull ST16

[@mcrispi2963]

Your videos are very helpful. I think I'm ready to do a movement replacement, 2813. May I ask what are you using to push the hands into place?

[@tickingWATCH]

Hi, thanks. I'm using just a refill from a ballpoint pen but you can buy a simple equipment for that check links in the description 😀

[@waris3732]

@@tickingWATCH that's actually quite innovative! Love that

[@tickingWATCH]

@@waris3732 Thanks :)

[@doluan6853]

Seiko nh35 có thể thay thế mingzhu2813 không

[@tickingWATCH]

No it cannot, Dial is is mounted differently 👍

[@quesoy23monn8]

Is it possible to convert my quartz watch to an automatic movement?

[@tickingWATCH]

Everything depends from the case that you have, should be big enough to the movement

[@quesoy23monn8]

@@tickingWATCH thanks Sir, I actually want to change my quartz movement to a Miyota one I think it's an automatic movement and the size of my watch is 42mm I think

[@tickingWATCH]

@@quesoy23monn8 than start, remember only that you have to fixed the movement, with some movement holder

[@quesoy23monn8]

@@tickingWATCH thanks sir

[@josephstratti52]

Loose the dico music please,you may get another subscriber!

[@tickingWATCH]

I thin I can find some 😀

[@ginanjartamimy1046]

Can 2824 replace with mingzhu 3804?

[@tickingWATCH]

YES 😀

[@niepaczenawet]

Cześć, od niedawna zacząłem poznawać tajniki serwisowania zegarków w domowych warunkach. Z tego też względu mam pewne wysokopoziomowe pytania. Dlaczego postanowiłeś wymienić ten mechanizm? Czy masz jakieś ciekawe źródła, z których sam się tego wszystkiego uczysz? Mam stary zegarek, który wymaga wymiany mechanizmu i zastanawiam się po tym filmie, czy nie lepiej poszukać jakiegoś "ciekawszego" zamiast kupować prosty chiński na baterie, który jest tam domyślnie.

[@tickingWATCH]

Fajne hobby. Jeśli chodzi o wiedzę to poszukaj na chomiku, jest tam trochę książek. Mechanizm warto było wymienić na Miyote bo ma nieco lepszą renomę. Co do zegarka to już decyzja należy do Ciebie czy naprawa starego czy jednak kupno nowego. Czasami nie opłaca się naprawić lepiej kupić nowy. Powodzenia

[@mikejamieson4252]

Can I use the mingzu rotor on the miyota? I don’t like all the writing

[@tickingWATCH]

When it fits way not 👍

[@maximilianotorresperaza4053]

Hello friend, how many millimeters was the watch you put the miyota on, I think I'll do the same with my watch 💯

[@tickingWATCH]

Watch has 40mm but inside the case is 29mm

[@v7045]

Please tell me what else can be replaced, and if possible quartz?

[@tickingWATCH]

Quartz movement can be installed to this case but you need the right size movement holder ring

[@v7045]

@@tickingWATCH Thanks, I'll watch something suitable)

[@cv600rr]

Does the miyota hack?

[@tickingWATCH]

This one doesn't. It is an older version 👍

[@jeremy67A]

If you have a watch with these movements in them, can you swap them out for a PT5000 ?

[@tickingWATCH]

Yes but you will need to replace dial and hand either 👍

[@mikejamieson4252]

Which better miyota or a 3135 clone? My minghzu date wheel worn was thinking miyota but I heard it is non hacking where minghzu has hacking

[@tickingWATCH]

Probably 3135 clone, the question is will the dial from Miyota also fit?

[@239dc5]

Is there are hi beat replacement for dg2813?

[@tickingWATCH]

Never saw, so rather not!

[@239dc5]

@@tickingWATCH which miyota is best 2813 replacement?

[@TheH75914]

what tool did you use to get the case back off??

[@tickingWATCH]

Case back opener. Check links in the description down below

[@ti7zz]

Would it be possible to put this Miyota 8215 in a Pagani PD 2770?

[@tickingWATCH]

Probably yes, but first what kind of movement do you have there now ?

[@ti7zz]

@@tickingWATCH The Aliexpress ad says it's seagull 2813, I saw in some videos that this movement is a copy of the myiota8215, but I don't know if it's true, I'm a novice in this maintenance issue 🥹

[@tickingWATCH]

​@@ti7zz they are very, very similar but not the same

[@ti7zz]

@@tickingWATCH It's on its way to my city, as soon as I make the change I'll come back here to tell you if it worked.

[@tamedward7213]

Have any plastic rings to resist water??

[@tickingWATCH]

Yes they have a rubber gasket 😀

[@edlitwak2857]

I have the same Starking and would not destroy that nice bowhouse style watch to scavenge the movement. why not buy a movement?

[@tickingWATCH]

Of course can be done 😀

[@sprocketsmagazine9801]

Do you have a link to buy all the tools you use?

[@tickingWATCH]

Yes. Check links in the description down below 😀

[@jdmparadise5073]

Hi is that a 29mm dial?Great vid by the way.

[@tickingWATCH]

Hi, this one has exactly 28.5mm but for this case 29 will also fit 😀

[@jdmparadise5073]

@@tickingWATCH I am in tokyo and i was looking at this guy using a 29mm dial.The date calender did not fit well as it was out of alignment.So he did some diy stuff.Pretty interesting.You can check it out here -> kzbin.info/www/bejne/aqe3lI2fr9-CkJY

[@gGBb27]

how do the 2 movements compare?

[@tickingWATCH]

Miyota better although more expensive

[@claudiugeorge5445]

Hello,i find a pagani design submariner wich have this movement, miyota 8215, this watch has had the seiko nh35 but for a while pagani switch to this miyota...anyway, it is a good and trust movement? It is reliable,or the seiko nh35 is better and reliable than miyota?

[@tickingWATCH]

That's are the same category movements, both are reliable. I'm not sure but nh35 has slightly bigger power reserve but if there is someone who could confirm that would be great 🙂

[@claudiugeorge5445]

@@tickingWATCH so i shouldn't have any issues with miyota 8215? Because i saw many peoples who are saying that miyota is a downgrade from nh35

[@tickingWATCH]

@@claudiugeorge5445 my sill works and I have some Miyota that are in 30 years old watches, check my vid about Citizen restoration

[@mrkarate2481]

I bought this new Pagani Design 2021 with Miyota and I only have one thing to say, excellent, I can't even remember the last time I set the time on my watch because Miyota is very accurate, it must be doing about 4 seconds a day, has an impeccable accuracy.