SECRUI wireless doorbell M520*3+F55*2 How to pair different music?

Expandable with Additional SECRUI Receivers/Transmitters
Central paging: several receivers can be controlled from a single transmitter.
Individual paging: each receiver can be controlled individually from additional transmitters. Different push button can be set to different doorbell chime.
Method of setting:
1. Clear All Settings（3 receivers）---First unplug the receiver, then hold "VOLUME" button and plug in the outlet, Keep on pressing and holding until there is no more sound and light
2. Press the music button to select your favorite ringtone. and then press the volume button and the music button at the same time to enter pairing mode. After you hear the beep sound, it has successfully entered the pairing state. Press the transmitter once in pairing mode and the receiver beeps to indicate successful pairing.
If you have two receivers or more, use the same method（Select Ringtone - Press and hold both key at the same time to enter pairing mode - Press the transmitter to pair - Press the volume key once to confirm and exit） to pair the other receiver.
If you have two buttons and want to set a different ringtone for each button you can follow the below method：Select ringtone - enter pairing mode - press transmitter- press volume key to confirm and exit. Use the same method to pair another transmitter.

[@Daniel-xl2qu]

I was going to return my doorbell kit because even by scrupulously following the included instructions, I could not associate 2 different sounds with the 2 transmitters. Then after searching the web, I came across your video. THANKS !!! for that. However, I didn't understand why you made the presentation with 3 receivers; I think I would have understood more quickly with just one (having 3 leads to a lot of confusion from the middle of the video).

[@mysticalgypsy17]

Thank you so much! The video shows the overall process great, but I was a little confused about why you pressed the volume button during the end of pairing it & then pressed the transmitter's button again. Fortunately I found that you have included step by step instructions in the video's description as well. Thank you so much for that, it answered my questions and helped me understand the process better! I already had a receiver that was automatically paired with an included doorbell button/transmitter. I have it up to max volume, set it to play an ear catching, jaunty tune that lasts about 5 seconds and it's plugged into a hallway outlet that is only about 12' away from my spot in bed. However, I have damaged and reduced hearing in both ears, plus I'm a sound sleeper. So unless I'm awake or only half asleep, I don't hear the doorbell. Therefore, I decided to get another receiver to plug into a bedroom outlet too. I turned up its' volume, set it to the same tune and tested it. But it would only work if I unplugged the 1st receiver. So I googled how to pair them to each other and found this awesome video and its' step by step explanations. Then I plugged my 2nd receiver into a receptacle close to my front door long enough to pair it and ensure that I could hear both of my receivers at the same time. I'm relieved to say that thanks to the information here, it went quickly, was so simple and it shockingly worked on my 1st try, lol! I'm going to write a glowing review for it on Amazon and will continue to recommend your company's doorbells to my family and friends! 😁👍

[@chrispledger8277]

I have spent two hours trying to sort this system out and after viewing your simple (in the nicest possible way) instructions i completed my task in two minutes. Many thanks

[@secruitech3889]

You are welcome.And thanks for your support

[@ChristianSullivan]

Between 1:24 and 1:29, that’s the exact same pitch/tone for the doorbell at the building where My Transition Program is located for people with Disabilities. My friend from class sent me this video! It’s neat seeing the source of the sound and how the actual doorbell unit works!

[@Jgfweb]

Is there a video anywhere showing how to set a different ringtone for each button? When I go to set the second one, they both end up the same sound. I really want to differentiate between the front and back doors.

[@NorthernMtnMan777]

Very helpful…. Would even be improved with some text/info about what is being done in each step. I had to watch/rewatch many times to get the idea but finally got ours working

[@CarenKnox-ik8fv]

I am trying to separate the two receivers - in other words, not just set a different tone, but have one receiver ring only when the back door button is pushed, and the other one ring when the front door button is pushed. I have set different tones, but they both ring their individual tone when either button is pushed, so we can't tell which button is being used. Did I miss a step here?

[@briannguyen3194]

Thank you ❤❤❤

[@mizzbertha2700]

Thank you.

[@sarahdejesusr]

Can i install 2 different sound for each bottom with just one receptor?

[@secruitech3889]

yes, you can set different sound for each bottom. if there has any problem, pls send us a mail. [e-mail])

[@erinsloan2825]

Is it possible to pair multiple buttons?

[@secruitech3889]

yes, this SECRUI doorbell can pair up to 20 buttons.

[@matthieuhamidikirby]

1:24

[@chavezcarmen6277]

😅😅😅😅😅😅😅😅😅

[@chavezcarmen6277]

Ahahahaha

[@user-fc9pe8th4b]

Лл

[@ranelt.8670]

Duirudi11

[@chavezcarmen6277]

Po 243517536243510436