Sennebogen Clamp Bucket Breakdown/Bush Fix. WELDERFABBER Episode

[@markarmstrong2592]

The Fox must be so glad that he has you on his team. Great job Baz you are the main man👌

[@welderfabber]

hope so

[@JohnMichaelPritchard]

The Harris torch is a great bit of kit.

[@rangie999]

baz TREMENDOUS INGENUITY and SKILLS you are the SURGEON of Steel. EXCELLENT and NOTHING LESS

[@welderfabber]

Cheers mate, appreciate it

[@adamhoward1687]

I'm in the same industry nice to see you spreading the knowledge it's a dying trade you wouldn't get an accountant coming home from a hard days graft and then watch a video on their profession. Keep up my man

[@alanclark639]

Happy days Baz - and nights - in the rain, knock up a temp bush with a cutting gun - love it! (Hope you gave the operator a Droylesdon nod over keeping on running that bucket with the greaser knocked off.) Then back out again for a bath in Hydrol - what can a man ask? So how much 20mm can a good man pick up with that rig - he seemed to be swinging it well - not too many dings in the carriages and well cleaned out? How long did it take him? Did he manage the deadline? Need I say - great work and keep 'em coming.

[@lespurbrick9242]

AND THAT MY FRIENDS IS WHY BAZ IS ON THE BIG BUCKS , GENIUS MATE KEEP IT COMING ,,,,,

[@keithbrueton]

Another great episode Baz and thank you Director midweek special

[@garrysouthern1439]

a true grafter credit to you

[@Eavis_excavations]

Another great video good fix to get thing going again that’s what it’s all about 👨🏻‍🏭🔥

[@jamiewall9076]

Right man with the right skills in the right place at the right time, right!

[@kevancroftkc]

Fantastic job Baz.

[@Professional-struggler]

Nice bit of gas axing there Baz 👌👍

[@welderfabber]

Thanks Chris lad that new torch is top notch

[@seagullsbtn]

That is one Ovalled out Ram.

[@jimmyquinn9639]

Interesting video 🚜👍👍⭐️⭐️⭐️👏👏👏👏

[@SunnybraeCroft]

When the shite hits the fan they got the right man! Nice temp repair, skills on that axe.

[@buddysinsight9834]

Can I suggest something Baz that could possibly save the company lots of money. If you ever have to offload the train with diggers you could literally have some braces (out riggers) in the yard that will stop the carriages tipping as you off load and derailing them. Quite simply and fast you can just put a 60 degree prop under the top lip in each corner of a carriage and offload. This would keep each carriage solid not allowing it to tip. They have a very narrow base but a couple of minutes from each driver just standing corner props could save time and possible fines. I have a engineers approach to everything I believe this would transform offloading.

[@MrPlumberguy23]

i was waiting to see him drill a hole for the grease 😂 professional grade work!

[@scotspie501douglas7]

great engineering skill but longer than 30 mins keep them coming

[@gazbateman4234]

Absolutely grafting u mate and the lads top job

[@lukedaniel4563]

Dakota Fred would be proud of that repair baz 👍👍

[@roberthewitt1030]

Fair play baz. Good free hand cutting i know how hard that is to do. 8.5 out 10

[@bennoben1653]

Great temporary repair Baz , top job , well done . Great respect for the ones that go that extra mile and never give up 👍

[@Eavis_excavations]

Bang on Baz very interesting to watch

[@johnbingham7300]

Great job who need a machine shop when you're on the job great cutting free head

[@welderfabber]

Thanks 👍

[@XLbullyZeus]

Baz amazing bush fix fella. Can’t believe how quick you done it, Top work keep it up

[@Seanmountford]

Great video Baz they just get better and better,watching the temporary repair was really interesting keep it up.

[@welderfabber]

Thanks 👍

[@petegraham1458]

Well done!

[@boydovens4180]

Its always the case that you never have what you need in the van , Really enjoyed the video , you have to work with what youve got . I always remember working with hydraulic hoses , we kept reusable hose connections , where you if possible we cut out the bad section of hose , fitted the new connections using a knife , vice, and hacksaw . A £15.00 solution to a £100.00 problem.

[@welderfabber]

yeah good advise

[@plkpilkington]

Hi Baz, I've come over to your channel from a recommendation by snowball engineering😊

[@sicknote26]

Most say know fookin about when it comes to baz and the Director

[@ceedeekaytee1961]

You said you were the "Gun" with a torch and I thought to myself "that's a big claim young fella." Actually i think you said your dad was No 1 and you were No 2. But you proved yourself. Welding it to the bucket was a stroke of genius too. I would've been mucking about with a clamp or two. Not too pretty but very functional and like you said you saved the eye from more damage and becoming irrepairable. Love your work.

[@malcelwell7209]

Baz just caching up with your amazing videos, and this one omg how good are with gas cutting. Love it Baz 💪💪💪

[@mikecoates3039]

What great temp repair, there's no such thing as can't , just thinking on the spot and getting the job done 👍 👏

[@welderfabber]

Thanks 👍

[@richardellis3141]

nice, quick, temporary repair.

[@paulf2529]

That is a proper in field fix, keeping things running and keeping it real.👍

[@CR_C30R]

That homemade bush is better than original! Mad how steady your hand is !! Keep up the good content ! Loving it ! 😊

[@flippingmad]

Nice bit of graft that. Health and safety special lmao 😂

[@paulmoxon8839]

Man after my own heart there baz…!! If you don’t have it the make it…..!! Standard operating procedure…! Cracking episode as always bro and bro…

[@FIAT-TURBONewHolland]

Great Bush fix to keep show on road YE MUST LOVE THE BUZZ of it all keep up good work and the videos great see its not always pretty parts to keep rolling 👌👌👌👌👌👌👌👌👌👌👌👌

[@jamesbrewer7800]

Freddie Dodge would be proud

[@welderfabber]

Legend

[@BCB]

Good job that baz fast and efficient ! Might do one of them temp bushes on my doosan 😂

[@welderfabber]

😂

[@johnpeplow3985]

Every company needs a Baz and every Baz needs a director and we are lucky we’ve got both.👏👏👏

[@welderfabber]

Cheers

[@GrahamWP58]

International rescue has nothing on you Baz great to see a bush fit to keep the wheels turning. Busy old night. Lets crack on to the next one.

[@korzer]

Nice one Baz and the Director, fun episode to watch, and so interesting to see how you came up with a fix when most of the country is sleeping!! enjoyed the ending with the instagram clips too, showing us what happened after.. good job narrating and explaining everything! Be safe

[@mattdHGV]

Some man baz, nowt worse than getting in the feather and the phone going 😂😂

[@stevemawz]

Director thinking; FFS, it's half past 10 and I'm using my foot as a vice with a mad man wielding a grinder millimetres away from my toes. What could possibly go wrong.... I don't get paid enough for this! 😂

[@ypaulbrown]

that is hilarious, I was thinking the same thing....

[@ypaulbrown]

holy smokes BAZ, your keeping me up all night watching your videos.......cheers at 5 am in Florida, Paul

[@petermay2034]

Great job Great videos 🎉👌

[@jasoncoates1260]

A nuther top video there Baz

[@kevinprendergast3259]

Great stuff as always

[@andyclark1426]

Proper job big man, that’s the way I served my time, use what you have & get it going, also thon gas axe is the doggies bollox 😂

[@chrismarshall5155]

Good luck Baz,your starting with a talented lad by your side with cal....thats already a big push to success....look forward to see what the future brings you guys

[@welderfabber]

Thanks 👍

[@gerryduffy6700]

Fair play Baz, what a pure piece of emergency engineering. I never thought you could do it, but you did. Super work 🇬🇧👍

[@welderfabber]

Thanks 👍

[@hornetboy3694]

Awesome video, thank you Baz and mr Director .. Great temporary repair job

[@gregmurray3447]

Brilliant 👏🏻👏🏻👏🏻

[@stuartbirch7028]

Another good little mid week special from the man himself self and director!! Baz smashed it as always.. the 🦊 has a good lad there.. keep up the good work lads.. roll on Sunday for another epic episode!

[@mingthemerciless6855]

Baz, TV series Mc Gyver has nothing over you! Brilliant fix. You Da Man!

[@jamiebhoy18888]

Nice one mate, got some great lads that go the extra mile and open up to save the day well in lads...

[@slawomirw.8074]

Great job Baz! Greetings from a fellow welder fabber out of New Jersey USA!😎

[@scotspie501douglas7]

love how clean your service van is credit to you every service engineer could learn from you

[@raymondstitt648]

Just watching a short on baby blur. Love the music behind it playing when the man comes around. Keep up the fantastic work 'Boys' 👏

[@welderfabber]

Glad you enjoyed it

[@qsk19r]

Top bodge job fair play

[@kenmcfarland4287]

Great job Baz reminds me of my time in the MN 👏👏👏👏💙💙💙

[@johnharlow6297]

Getting better every week baz nice to a man who nosey stuff

[@ed_zeus]

That torch is brilliant. I’ve melted so many oxy acetalyne nozzles in my time. Good bit if manual eye up. Top lad, old school always works half these young plant fitters would just sign the ticket off and go back to bed

[@speakmiester]

Amazing channel Baz, found you through the struggler and baxenden, KZbin has been crying out for you and your content, keep up the amazing videos, awesome 👍👍 cheers, Loomo..

[@raymondrobertson3869]

Excellent mate. Typical old school. Just like me. Never stuck with a breakdown in the field. Keep them coming🥶👍👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@Munguy-i8j]

Well done man. That repair looks better then factory.😊

[@leshall4285]

Another brilliant episode Baz and Director, never a dull moment

[@stacyscholes6760]

Could sit up all night watching your vids

[@welderfabber]

Thanks pal

[@darrynnoyce5948]

Old school @ it's best that's priceless good old British can do attitude and passion for the job top job baz and director like the footage real depth and attention to detail banging 😜

[@welderfabber]

cheers bud

[@neilwharton720]

Great bit of improvisation to keep the job going sign of an engineer not just a fitter, good job Baz👍👍👍. Im beginning to think of the Director as a bit of a Stig of the plant world💪💪💪

[@welderfabber]

Haha and thanks

[@Studio-gp4nk]

Spinal Tapping 11/10 that. Great Job.

[@welderfabber]

Thanks!

[@toddcunliffe9920]

Wow that is 1 incredible freehand repair, Yes Baz

[@welderfabber]

ta bud

[@ricardocarvalho1235]

Great videos love everything you do i miss them days of working and welding I've been diagnosed with progressive multiple sclerosis that affected my body and the only thing that I'm able to do is look at my tools and welding masks nothing else I'm teaching my kids some things and thanks for all the great memories 🙏🇵🇹

[@jayden4656]

Pretty impressive

[@paulkilburn6102]

Superb content what skills!!

[@barnzYT]

I love this sort of work, getting something up and running with what you’ve got Tony beets style! If I had a van like yours I’d happily do this all the time contracting/on call. Easily do a full nightshift in that van

[@gorillaz308]

New subscriber here! This channel and professional struggler are the muts nuts. Love watching you guys demonstrate your craft! 👍

[@TruckerMRB]

enjoyed the video chap....Lots of variety ..Excellent

[@welderfabber]

Thanks 👍

[@penningtoncolin]

Alright baz there ain't nothing you can't fix ,one of your lads think it's Drew ,moved a machine for us today he said your some boy !😂 your channel is one of my favourite big thanks to Ben for his great work too😉

[@charleynewell6604]

Very skilled man you are baz a dieing breed skilled men brilliant from the director coming out with you on a call out so we can watch 👊

[@thomasjones3946]

Cracking job no messing about straight in get it done 👍👍👏👏

[@jackdawg4579]

Nice fix under pressure. I suppose one problem with working out of a van against a ute style vehicle, you couldnt do that cutout using the vice in the van!

[@miketaylor8777]

Top work with the gas axe Baz. Director, fantastic foot work. Excellent video all round.

[@Drewski911]

Always quality content and better than most of the crap on TV! Nothing ever seems to faze you and you're always so chilled when under pressure Baz 😎 Excellent temporary repair and quick solution to the bush issue 👌 Absolute bummer about the subsequent hydraulic hose failure.

[@jamesadams893]

Well done Baz

[@damianmcnamara1]

Great episode 😊

[@welderfabber]

thanks

[@ONTTools]

He’s a good un is John at Pirtek he’s dragged me out of the sh#t on many an occasion that’s one dedicated man. Cracking video Baz 👍

[@richardkitchen7264]

Top job that. Not many can think on their feet to get the job sorted with whatever they’ve got in the van. Been in that situation many a time and there’s no better job satisfaction than watching whatever you’ve fixed get back to work.

[@welderfabber]

Its why I love the job you never know whats cominng

[@waynec6438]

Great job baz👍

[@welderfabber]

Thanks 👍

[@deepwinter77]

Nice work with the Gas Axe Baz, You've got a good eye to get that bush so close with a torch.

[@welderfabber]

Thanks 👍

[@ed_zeus]

Had one like this before on a road railer, wrapped sliced bits of mild steel pipe because it’s all I had on the van. All migged up it lasted so no loss either way

[@paulusmarc]

Bon Boulo 😆😆👍👍

[@anthonyshaw7251]

Nice one Baz/Director, the times you have to sacrifice a tool to keep job moving, make sure to make another plate for your puller Baz, ps, is there enough money in the kitty for boot laces for the Director lol😉

[@welderfabber]

Your kidding he has very expensive boots with wire like snowboarding boots 😉

[@anthonyshaw7251]

Ok looked like no lace in eyelets, will check them out.

[@jascollinscork]

Another cracking Episode Baz 👌🏻 !! Amazing to see that pipe company getting up and out for ye too!! Great relationship ye obviously have 👍🏻

[@Djbob8139]

Good job Baz, i have a feeling your channel will blow up in size, great content.. "Edit" to give the director a shout out too..

[@welderfabber]

cheers bob

[@SuperTone35]

Now thats what you call a very good local repair. Good job Baz. Don’t agree with you that the bush is good for tonight. That bush is good for 6 months😂👍

[@welderfabber]

😂👍

[@adrianshjadesheehan9991]

Baz where's the midweek special looking forward every week to your videos

[@eppot1]

Nice fix!!! gets you true the night.👍

[@welderfabber]

You got that right!