Рет қаралды 162,866
드라이플라워를 이용한 빈티지 풍의 석고방향제를 만들어 볼게요.
급하게 선물할 일이 생겨 만들면서 촬영 했어요.
건조하는데 시간이 걸려 빠른속도로 영상을 편집했구요~~
실제로 만들어 보실때는 시간적 여유를 가지시고 충분히 건조후
몰드에서 분리하는것 잊지 마세요..
다른분들은 올리브리퀴드에 향을 먼저 넣고 만들기도 하지만
저는 그렇게 만들었을때 완성된 석고에 얼룩이 생기고 잘 부러져서
그냥 물로만 석고를 반죽해 만든후 뒷면에 향을 흡수시켜서 사용한답니다~
필요한 재료및 도구[총 4개 완성]
- 재료
물 약 140g, 석고분말 약 350g
수용성 색소(옥사이드 파우더 색소들 사용)
블랙, 오렌지, 그린, 블루옥사이드
에센셜오일및 프래그런스오일
드라이플라워
- 도구
전자저울, 석고용 보울
스푼(젓는 도구)
[만드는 법]
step 1: 토핑몰 몰드에 부을 석고를 먼저 반죽해서 건조시켜준다
step 2: 건조될 동안 타블렛용 몰드의 절반만붓고 건조시켜준다.
step 3: 완전히 토핑장식용 몰드가 건조되면 빼낸다.
step 4: step 2의 절반이 굳으면 그위에 나머지 를 붓고 토핑장식을
올려놓고 잘 어울리는 드라이플라워를 꽂아준다
step 5: 완전히 굳으면 빼내고 사포로 지저분한곳이 있으면
깨끗하게 다듬어 준다.
step 6: 뒷면에 향을 흡수시켜준뒤 자연스럽게 라피아끈이나 마끈
등을 달아 주면 됩니다.
I'll make a vintage style gypsum fragrance using dry flower.I made a sudden job to do something,
and I shot it. It took a long time to dry,
so I edited the image at a high speed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When finished gypsum is stained and broken well,
it is made by kneading gypsum only with water and
then absorbing incense on the back side. ~
Materials and tools needed [4 total] - Material Water about 140g,
Gypsum powder about 350g Water-soluble dye
Blend gypsum into the topping molar mold.
First, add the gypsum to the topping molar mold.
Step 1: Add the gypsum to the topping molar mold.
Step 2: Pour only half of the mold for the tablet during drying and allow to dry.
Step 3: Remove the topping ornamental mold once it is dry.
Step 4: If half of step 2 is hardened, pour the rest on top of it and put the topping decoration on it and insert a dry flower that fits well.
Step 5: Remove it if it is completely hardened and trim it if there is dirt on the sandpaper.
Step 6: After absorbing the fragrance on the back, you can naturally attach a raffia string or thread.
재료쇼핑몰: 자연으로 www.to-nature.com
Twin Musicom의 Cinematic (Sting)은(는) Creative Commons Attribution 라이선스(creativecommons.org/licenses/... 따라 라이선스가 부여됩니다.
아티스트: www.twinmusicom.org/
Sound Track 출처: www.twinmusicom.org/song/308/w...
아티스트: www.twinmusicom.org