Sequoia APOC Industies Trailing Arms

[@NatalyAli-ji8fw]

Good job Mo,

[@HebrewNomadOverlander]

Good job Mo, Keep it moving and keep the content coming.

[@MoWahidi]

Thank you so much

[@treehouseoffroad]

Great video brother! Yeah these things are beefy but after having them installed for 18 months I can say that the poly bushings do not like to flex or articulate off road. I'm on my 3rd set of bushings. Luckily Apoc backs their products and sent me replacements for free. Absolutely no fault of Apoc, it's just the nature of polyurethane bushings. I paired them with some johnny joints / heim joints and it helped a lot. From the looks of it you aren't building an off-roader, but some of your viewers may want to know this. Something else I learned the hard way - down the line If you go to grease these while they're on the vehicle, loosen the bolts first. The grease is under such high pressure it will distort the bushing instantly when you pump it in if it has nowhere to escape to.

[@MoWahidi]

I just watched your videos man you have probably the most flex out of any sequoia I have seen i new people replaced them with heim joints but did not know you can get that much flex. and yes its pretty much daily/ tow rig but i will take it off road some times lol not like your rig you have pretty awesome build.

[@euromotorsports]

Love it brotha!! those apoc arms been on the list to get to finish my suspension setup. Please keep us updated how it changed things

[@MoWahidi]

will do so far nothing really different other than little improved handling

[@WestCoastFloridaFishing]

How important are these if off roading is nill-to-none? Like the content though! Next is doing a retrofit HID conversion!

[@MoWahidi]

they do effect when off roading if you have long travel and a lift it keeps you from getting one wheel up off of the ground by adjusting the length on them it will keep the opposite wheel on the ground because they are tied to your rear axle

[@hamadlari]

Great video and info i am planning on installing these beefy trailing arms on my tahoe do you recommend them for off roading i already have king shocks all around and a dirt king mid travel kit on the front side but on the rear side other then the king shocks its stock

[@MoWahidi]

I don't off road my truck. but from the feedback from other people that have them on. they are really good and just beefy. also, the benefit of them being adjustable will help you with lifting your truck higher. you can add heim joints and they will have more articulation.

[@stevemustard1889]

Put a dab of lock tite on the threads before you tighten up the jam nut. They will listen up if not

[@MoWahidi]

lol your comment was a day late I have this noise and couldn't figure it out then I checked them and sure enough they are loose so I put some and locked them hard yesterday