Serpentine Belt Replacement Ford F-150 5.4L V8 2004-2008

  Рет қаралды 273,594

2CarPros

2CarPros

Күн бұрын

Пікірлер: 123
@GaryCulp-e7y
@GaryCulp-e7y Жыл бұрын
Thank you! My truck was sitting at the mechanic's shop waiting to be fixed, but I had a doctor's appointment the next day and needed my truck. I looked at your video, bought the belt, fixed it myself in the mechanic's yard, and drove it home. Now I can go to my appointment tomorrow! Thanks again!
@MrSpansell
@MrSpansell 6 жыл бұрын
Wasn't quite sure what I was looking at until I saw this vid. Thank you for the extra effort in showing, best instructional video I've seen for this!
@markusschmalz2222
@markusschmalz2222 4 жыл бұрын
Great instruction on the replacement of the belt, the part that is missing is to check for bearing noise after removal of the belt.
@palmbeachslayers5295
@palmbeachslayers5295 3 жыл бұрын
Noise and bearings
@lawnworkshawaii2418
@lawnworkshawaii2418 6 жыл бұрын
Saved me a lot of time with your tips. Especially the 1st part. The belt on my truck was broken into pieces. Thank you
@2carpros
@2carpros 6 жыл бұрын
Awesome! Thanks for watching!
@jeremychristie3635
@jeremychristie3635 3 жыл бұрын
My buddy’s serpentine belt just broke on his 2005 F150 5.4 , glad this video was here so I could replace it on the side of the road
@2carpros
@2carpros 3 жыл бұрын
Nice work! Thanks for watching!
@YouMotorcycle
@YouMotorcycle 3 жыл бұрын
Starting looking around at what the source of my noise was after watching this video, and boom, as soon as I backed off the tensioner, my pulley falls right off. Thank you for posting this. Was able to tackle the job myself.
@2carpros
@2carpros 3 жыл бұрын
Oh dang! You got super lucky that didn't happen on the road. Thanks for watching!
@YouMotorcycle
@YouMotorcycle 3 жыл бұрын
​@@2carpros Super lucky man. I took a video and sent it to a buddy I used to work for ten years ago who's a Porsche mechanic and he told me right away to check the pulleys. I had a feeling something was really not right. I even backed my truck in the driveway, nose sticking out, just in case I needed to call a tow truck to get me to the shop lol. This is what it sounds like when your pulley is about to fly off: kzbin.info/www/bejne/hJOVcoeppbunisU
@drewr1552
@drewr1552 3 жыл бұрын
@@YouMotorcycle Mine sounds like that right now. So do I have to replace the pulley?
@YouMotorcycle
@YouMotorcycle 3 жыл бұрын
You're asking the wrong guy lol. But that's a video of mine and you can read the comment. Pulley was DONE lol
@ianhillman4007
@ianhillman4007 3 жыл бұрын
Best video description on KZbin by far. Great job young man. Thank you. 👍🏻🍻
@2carpros
@2carpros 3 жыл бұрын
Wow, thanks!
@thekuhn1
@thekuhn1 6 жыл бұрын
Thanks for this video. Because of this I was able to change my belt in 20 minutes!
@2carpros
@2carpros 6 жыл бұрын
Awesome! Thanks for watching!
@joeysoda1404
@joeysoda1404 3 жыл бұрын
Just saved 100 bucks! I appreciate it!
@2carpros
@2carpros 3 жыл бұрын
Nice work Joey! Thanks for watching!
@juki1x
@juki1x 5 жыл бұрын
thanks man, had an issue with the tensioner to the point that it got destroyed. no power steering and a dead alrernator. was able to change it and change the belt. Lear from .y mistake, if you hear like a bunch of leafs blowing or squealing, get it checked out before total failure. luckily it happened when I got home.
@brokeguyshomestead6227
@brokeguyshomestead6227 2 жыл бұрын
was looking into older fords now i now what to look for!
@zxtimtimxz9595
@zxtimtimxz9595 4 жыл бұрын
Is there a sensor sir something on the black plate behind the radiator fan? My girlfriends belt broke and it looks like it pulled wires out of a sensor 2007 for expedition Eddie Bauer edition triton 5.4l
@drewberrynews3875
@drewberrynews3875 4 жыл бұрын
Great video! thanks ill be doing the ac compressor and this belt at the same time. thanks again for your help here!
@2carpros
@2carpros 4 жыл бұрын
Awesome! Thanks for watching Andrew!
@peterv1806
@peterv1806 6 жыл бұрын
Just changed my S. Belt. Thanks to you it went perfectly. Thank you so much! Great info, perfectly explained!
@carlossauceda6944
@carlossauceda6944 3 жыл бұрын
Very helpfull thanks i change all my idler pullies nd the tensioner as well as the belt you did a goos job thanks again
@CP-ux9zd
@CP-ux9zd 7 ай бұрын
I recommend the complete kit. The shop recommended just a belt for my squeak. I declined. I just did the complete kit myself. One pulley almost frozen up, two more drag resistance. Now all free and correct. Once your in there, it's just as easy to replace them all. About a hundred bucks for Gates brand on Amazon complete kit, "Gates 90K-38274 Complete Serpentine Belt Drive Component Kit"
@JakeNaughtFromStateFarm
@JakeNaughtFromStateFarm 3 жыл бұрын
You ain’t lyin about that last step bein the most important. I put one on a Chevy 3500 Express at work (school bus) and either it was a little off or the tensioner was bad. We started it up, backed it out, and heard a squealing. That belt was screwed lol.
@2carpros
@2carpros 3 жыл бұрын
Oh yeah, gets you every time! Thanks for watching!
@brentcampbell173
@brentcampbell173 3 жыл бұрын
Best video example for this vehicle
@2carpros
@2carpros 3 жыл бұрын
Thanks for watching!
@lucpelletier7901
@lucpelletier7901 8 ай бұрын
Thanks for the video, very helpfull.
@2carpros
@2carpros 8 ай бұрын
Glad it was helpful! Thanks for watching!
@chrismoore3745
@chrismoore3745 6 жыл бұрын
Thank you Sir! That went really well thanks to your help.
@2carpros
@2carpros 6 жыл бұрын
Thank you for watching!
@stevengeffe8929
@stevengeffe8929 2 жыл бұрын
where did you buy that belt from? and if i cant find it whats a good replacement for that? i have a 2005 f150 lariat 5.4L
@arthurrynkowski2214
@arthurrynkowski2214 Жыл бұрын
Good job body,explaining how to do this job
@2carpros
@2carpros Жыл бұрын
Thanks for watching Arthur!
@dsmdallas2466
@dsmdallas2466 6 жыл бұрын
On this model do you recommend idler pulley and new tensioner be replaced? 128k miles, 2nd owner, no noises but I dont have a full history on the truck.
@2carpros
@2carpros 6 жыл бұрын
Up to you really. I'd leave it till one starts squeaking then I'd replace all the pulleys and tensioner. Thanks for watching!
@papo1515
@papo1515 5 жыл бұрын
thanks dude.....saved me some money.
@2carpros
@2carpros 5 жыл бұрын
Thanks for watching!
@accorsistudios
@accorsistudios 3 жыл бұрын
Such a helpful video, there are 3-4 videos on here, but this helped a lot . I was a tiny bit confused routing the belt, or overlycautious I had it F'd up. But it was quick, easy and saved a breakdown for sure as there were a lot of cracks.
@2carpros
@2carpros 3 жыл бұрын
Great to hear!
@jamiejames1928
@jamiejames1928 7 жыл бұрын
Thanks so much for the video, mine snapped yesterday and need to replace it. The belt snapping won't have cause any problems will it. Thanks for reply.
@2carpros
@2carpros 7 жыл бұрын
Thank you for watching! Nope, just replace it and you are good.
@raygarcia8989
@raygarcia8989 4 жыл бұрын
Thank you very much for your excellent tutorial appreciate it you nice job thanks again.
@2carpros
@2carpros 4 жыл бұрын
You are very welcome! Thank you for watching Ray!
@snookwestwest2298
@snookwestwest2298 3 жыл бұрын
Great video buddy!
@2carpros
@2carpros 3 жыл бұрын
Glad you enjoyed it!
@ButterKrud
@ButterKrud 2 жыл бұрын
Remove the upper radiator hose or not? Isn’t losing that coolant a problem?
@2carpros
@2carpros 2 жыл бұрын
No you don't have to. I just did for filming. Thanks for watching!
@pinacate8975
@pinacate8975 6 ай бұрын
Hello is the same process for 05 expedition 5.4 xlt triton?
@2carpros
@2carpros 6 ай бұрын
Yep! Thanks for watching!
@pinacate8975
@pinacate8975 6 ай бұрын
@@2carpros thanks body....🙋🏻‍♂️ so helpful
@johnnylee948
@johnnylee948 7 жыл бұрын
Great video and good info!
@2carpros
@2carpros 7 жыл бұрын
Thank you so much for watching and commenting!
@stevelnu8796
@stevelnu8796 6 жыл бұрын
Worked great except for the 15 degrees outside
@cjwise5552
@cjwise5552 2 жыл бұрын
Please help me. I’m a fairly strong guy I’m 6’6 280 and I CANNOT get the last loop over the alternator. I tried routing it the other way and doing the idler pulley last. Everyone else makes it look so easy. Did they sell me a belt that was too short?
@2carpros
@2carpros 2 жыл бұрын
Yeah it really sounds like you got the wrong belt. It should be a little tough to get on but not as hard as you are having it. Thanks for watching!
@cjwise5552
@cjwise5552 2 жыл бұрын
@@2carpros I got it on. For whatever reason the tensioner wasn’t giving me enough slack. Only thing that worked for me was using brute force and shoving it under the idler pulley on the right without using the tensioner at all
@CP-ux9zd
@CP-ux9zd 7 ай бұрын
use your longest ratchet and a short length of pipe over the end of that ratchet is awesome. Leverage is your friend and necessary
@xkhanzii
@xkhanzii 6 жыл бұрын
Question. Over the last month my 05 F150 has had this problem where the wheel locks up and the dash says check gauges where the mileage is displayed. It was only happening when i would have the wheel turned all the way to one side and I would switch from drive to reverse. However today when I was pulling into a parking lot it happened in drive, I was able to pull off to the side and when I tried to stop the truck the brakes locked up in wouldn't push in. I managed to stop the truck and I let it sit for a bit, when i turned it back on everything was fine and I was able to get it home. Calling my local mechanic tomorrow but I wanted to ask if you had any ideas as to what the problem may be. I did a bit of research and some people were saying the serpentine belt might need to be replaced
@russellbeck1774
@russellbeck1774 6 жыл бұрын
Could be multiple issues but yes I'd start with the belt. It runs your power steering pump among other things.
@flyingunicycle
@flyingunicycle 6 жыл бұрын
Thank you for the video!
@2carpros
@2carpros 6 жыл бұрын
Thank you for watching!
@genocourtney9370
@genocourtney9370 2 ай бұрын
I'm looking for the alignment for a 4.2
@dsmdallas2466
@dsmdallas2466 6 жыл бұрын
U R DA MAN! Thank you
@2carpros
@2carpros 6 жыл бұрын
Thank you for watching!
@Stricker7792
@Stricker7792 5 жыл бұрын
thank you for video , 👍
@2carpros
@2carpros 5 жыл бұрын
Thanks for watching!
@elishaburley8135
@elishaburley8135 3 жыл бұрын
Thank you 🙏🏿
@2carpros
@2carpros 3 жыл бұрын
No problem 😊
@firstchancetryingboy4198
@firstchancetryingboy4198 6 жыл бұрын
Thanks man you help me out
@2carpros
@2carpros 6 жыл бұрын
Thank you for watching!
@jasminegriffin99
@jasminegriffin99 2 жыл бұрын
Thank you !!!
@2carpros
@2carpros 2 жыл бұрын
You're welcome!
@ryry998
@ryry998 5 жыл бұрын
Thanks dude!
@2carpros
@2carpros 5 жыл бұрын
Thanks for watching!
@palmbeachslayers5295
@palmbeachslayers5295 3 жыл бұрын
Great video my only complaint is the video is edited out where you feed the drive pulley power steering guide pulleys etc. Would be nice to see how you route then without the edit. Great video and commentary though.
@2carpros
@2carpros 3 жыл бұрын
Thanks for watching!
@jaimebitong8587
@jaimebitong8587 3 жыл бұрын
Shouldn’t I replace the tensioner as well?
@2carpros
@2carpros 3 жыл бұрын
If it is bad then yeah. But you don't need to replace it if you are just doing the belt. Thanks for watching Jaime.
@terrellscaife2411
@terrellscaife2411 3 жыл бұрын
Thank you help me with my problem
@2carpros
@2carpros 3 жыл бұрын
Thanks for watching!
@luism2924
@luism2924 Жыл бұрын
So what if it’s not holding tension?
@2carpros
@2carpros Жыл бұрын
Then you need a new tensioner. Thanks for watching!
@nikmamad
@nikmamad 3 жыл бұрын
Thank you,
@2carpros
@2carpros 3 жыл бұрын
You are welcome!
@Tigersmundo
@Tigersmundo 3 жыл бұрын
*You didnt show the fan part getting it around it!*
@2carpros
@2carpros 3 жыл бұрын
I showed exactly how I put on the belt though. Thanks for watching!
@sheepdog1201
@sheepdog1201 4 жыл бұрын
Everything is fine except you forget to say that you have to go under the flywheel once you go underthe A/C
@2carpros
@2carpros 4 жыл бұрын
Belts don't go under the flywheel. Thanks for watching!
@tyc5505
@tyc5505 5 жыл бұрын
Why did that motor sound like it was running a little rough??
@2carpros
@2carpros 5 жыл бұрын
It's a 5.4L Tri Valve. They often sound rough as heck due to Ford not putting a good enough oil pump in for the overhead cam. Thanks for watching!
@tyc5505
@tyc5505 5 жыл бұрын
@@2carpros thanks for the reply I only asked because mines an 06 and the engine runs/sounds great unless I put shit gas in it. But, it's also had regulatory maintenance.
@michaelj6392
@michaelj6392 5 жыл бұрын
Ty C I’ve got 140K on my 2007 with the 5.4 and it has always had a tick to it. Runs great though.
@roycebrown3447
@roycebrown3447 4 жыл бұрын
@@tyc5505 The theory is that Ford made the oil passages too narrow as well and if you use a junk paper oil filter like a Fram then it will cause debris to clog those oil passages. I don't know if I buy that theory. Mine had the tick when I bought it new from the dealer. They sales guy just told me they all do that. He showed me a few more and they did it as well. I'm not comfortable with it so I locked out the cam phasers with the livernois kit. It sounds fine now. I am planning to put in the Melling high volume oil pump as well. I love the truck but it certainly has a few flaws. Keep an eye on your passenger side exhaust manifold. Especially if you live in the North. That ones a doozy!
@blackyboi2885
@blackyboi2885 Жыл бұрын
so you dont need to change the tensiner pulley, like ford recommends
@Caramel_Goodness
@Caramel_Goodness 4 жыл бұрын
Thank you thank you thank you
@2carpros
@2carpros 4 жыл бұрын
You are very welcome! Thank you for watching Luis!
@loneranger6524
@loneranger6524 2 жыл бұрын
Thanks
@Theoz1412
@Theoz1412 4 жыл бұрын
Ty 👍🤘
@2carpros
@2carpros 4 жыл бұрын
Thanks for watching!
@troutjerky3489
@troutjerky3489 3 жыл бұрын
Why does that truck sound like that bad phasers?
@mabu420
@mabu420 2 жыл бұрын
What's the part number
@andrewchristopher7138
@andrewchristopher7138 4 жыл бұрын
use a Gates belt
@Darrenscrow12
@Darrenscrow12 5 жыл бұрын
Hello anyone know how to bypass a/c? Without ac
@Barber90Gera
@Barber90Gera 5 жыл бұрын
Buy a shorter belt
@chrisbassmansamis
@chrisbassmansamis 4 жыл бұрын
How come no one ever shows how they route the belt? To help us with the job. And less cussing!
@bigstep9276
@bigstep9276 3 жыл бұрын
why so many dislikes on this video
@ericpalacios7090
@ericpalacios7090 6 жыл бұрын
Yea me too
@stanpalmer7153
@stanpalmer7153 3 жыл бұрын
Show me a picture
@frankansualda8433
@frankansualda8433 5 жыл бұрын
This video skipped everything wtf not good
@2carpros
@2carpros 5 жыл бұрын
Thanks bud.
@chippewagreenworks5799
@chippewagreenworks5799 2 жыл бұрын
Duck my hands hurt from this bullshit
@2carpros
@2carpros 2 жыл бұрын
Gotta do it! Thanks for watching!
@maxamy89
@maxamy89 3 жыл бұрын
click click click click ... just like my ford :-(
@2carpros
@2carpros 3 жыл бұрын
Yep. 5.4 3v Always click like that. The cam phasers and roller followers always make that sound due to age and poor design. Eventually they destroy the engine. Then it's new engine time! Thanks for watching!
Ford 4.6L 5.4L V8 Engines Serpentine Belt Replacement
12:00
FordTechMakuloco
Рет қаралды 699 М.
Water Pump - 2004-2008 5.4L Ford F-150
26:04
BlueDriver
Рет қаралды 68 М.
Маусымашар-2023 / Гала-концерт / АТУ қоштасу
1:27:35
Jaidarman OFFICIAL / JCI
Рет қаралды 390 М.
КОНЦЕРТЫ:  2 сезон | 1 выпуск | Камызяки
46:36
ТНТ Смотри еще!
Рет қаралды 3,7 МЛН
Жездуха 41-серия
36:26
Million Show
Рет қаралды 5 МЛН
Replacing the Belt on a 2008 Ford F150
6:55
Thomas Fix It
Рет қаралды 330
How to replace the serpentine belt in a Ford 5.4L F150
7:55
The Original Mechanic
Рет қаралды 107 М.
How To Replace Engine Serpentine Belt 4.6L/5.4L V8 04-08 Ford F150
4:51
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 280 М.
Ford Trucks Hidden Feature You Didn't Know About
6:42
GK7 Garage
Рет қаралды 1,9 МЛН
2004-2014 Ford F-150 Front Strut Replacement Procedure
13:35
FordTechMakuloco
Рет қаралды 782 М.
Маусымашар-2023 / Гала-концерт / АТУ қоштасу
1:27:35
Jaidarman OFFICIAL / JCI
Рет қаралды 390 М.