SERPENTINE BELT REPLACEMENT REMOVAL KIA SORENTO, KIA SPORTAGE

[@ElectricalCarRepairLIVE]

Products that we use and recommend: ► Belt Kit with Pulleys (check fitment): amzn.to/40w7gJY ► Belt: amzn.to/3AvymWZ ► Panel Removal Set: amzn.to/3YiMADu ► Assorted Fuses: amzn.to/4fx4s3F ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Mobile 1 Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics

[@alejandrojauregui1195]

where is the ambient temperature sensor located on that engine

[@mden98]

Thanks for the video. I was able to take a picture of a still shot of the belt placement, to help re-install it. Have to say, this is the hardest serpentine belt, I've ever replaced. My tensioner bolt was a 17mm. I had to use an open wrench and attached the box end of another open wrench, to have more leverage(not enough space to use a socket). Working from the front side of the upper support mount, I used a 4"x4" piece of leftover fence post and placed it between the wrench(s) and the washer reservoir(maintaining pressure on the tensioner), while installing the belt on every pulley except the crank pulley. I had to remove the lower inspection cover (3 - 10mm bolts and 3 - trim clip plastic bolts), to access the pulleys from below. Then I used a 15/16" wrench, to turn the crankshaft and finish installing the belt on the crankshaft pulley. Afterwards, I removed the wrench(s), to release the tensioner.

[@aNtLoKo90650]

Yes it was very hard to change out lol

[@jzuvrart_simply]

Thank you for sharing your knowledge! 😌

[@rolandsmalls8886]

Thanks this your video helped out alot this engine looks exactly alike thanks again

[@mitsuevo8mr]

Will not apply to my 2017 kia sorento la 2.4L it uses two belts a big belt for the alternator and ac compressor and a small belt that runs from crank pulley balancer to water pump without a tensioner! I changed the big one but how do you change the small one if belt have no tensioner to release it!! Thanks great video!!

[@paris8777]

thanks for the info does this work with 2.4 sorento 2019?

[@FeliciaWhite-l4d]

Which pulley is the idle pulley

[@tomthompson7400]

first class video.

[@alexandermcdole8464]

Is this done the same way for a 2011 kia Sportage sx?

[@dracodraco7089]

Thanks…I was tensioning the wrong

[@andrewkerrigan6349]

Hello would it be possible to remove ac compressor and buy a smaller belt ?? Thank you Andy

[@markenndyaugustin1669]

good job

[@cliffordferguson7957]

Can a 4 cyc alternator pulley work on a v6?

[@ryanhultman1722]

Awesome thanks!

[@luferalamo1957]

excellent information, thank you.😎💪

[@edgardobautista650]

Excelente

[@JohnBoothe-ew8dv]

What makes it come off I found mine on the ground ok not broken

[@GodsMan500]

You probably have a wobbling idler pulley. Either the tensioner, or the idler. You need to wiggle them around and see which one it is. Also, one of those two could be seized up. Did you eventually get it working?

[@alejandrojauregui1195]

where is the ambient temperature sensor located on that engine

[@davidgeorge2113]

I appreciate the info very much but please talk a little slower to be understood. Ty

[@villavae4677]

Would’ve been better if you did it wit the motor inside the vehicle

[@JotakAlemao]

What about power steering pump?

[@zakholland842]

that car has an electric power steering

[@nicksanders2752]

This does not work for a 2011 Kia Sorento because you're missing the power steering pump with the 2011

[@rage690]

Here I am struggling and then I realize I only have 2 hands!

[@AlyasGulli]

Hi

[@stevesimmons8164]

Talked to fast and couldn’t get to see final install at end

[@joycelightleywellimpressed2485]

slowdown commentry

[@hamzavirkvirk4933]

Plz tell me engine belt number Kia sportage 2021 model

[@alejandrojauregui1195]

where is the ambient temperature sensor located on that engine

[@moturcu4226]

Mna gdmn cocu orda değiştirmeye ne var. Yramn anteni.

[@diegovalle6775]

You have to put more information about the engine, Kia has 4 cylinder and 6 cylinder 👎🏻👎🏻👎🏻

[@glitchthecat5011]

Only the v6 has serpantine.i know the v6 is slurpantine idk bout the 4cyl

[@du39104]

will 6PK2125 fit?

[@mr.cuttystabby5331]

Pointless video if thr engine is not in the bay