Service Tutorial K1 Series Replace the nozzle new version nozzle

Accessories purchase, Please contact our official email or website, remember to attach your machine type and accessories pictures
Official email：[e-mail]
Official website: www.creality.com
Any technical support in need, Please contact our official service email，remember to attach your printer model、complete orderscreenshot、purchase link 、printer product SN and the issue relevant video or picture .
Official service email：[e-mail]
Any inquiry of firmware and software，Please download it by creality official website：www.creality.c...
Creality firmware obtaining tutorial： • Video

[@independentsoldier4274]

why did my nozzle break when following these instructions. why does the hardering tip have no core, why is it so hard to figure anything out from creality….Really wishing i bought a bamboo

[@crealityafter-sale5706]

Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: [e-mail])

[@DaYYRice]

if my k1 max came with the unicorn nozzles, can i replace it with a regular nozzle? Last time i tried, i had filament oozing out the top of the hotend. Wasted 2 nozzles and needed a new hotend. Maybe it was my error on me, but i feel like i installed correctly.

[@crealityafter-sale5706]

Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: [e-mail])

[@smlyclts]

It looks like thermal paste applied on the nozzle.

[@YuanqinLin]

I tried doing this today and the nozzle got stuck when unscrewing. It broke eventually and now I have to order a new heater block.

[@random147555]

Was the nozzle at 240 before you removed it?

[@random147555]

Also did you make sure to hold the top portion in place with a wrench while loosening the nozzle?

[@YuanqinLin]

​@@random147555 yes and yes to the 240 questions as well. the screw only got stuck when it's about 2 cm out. before that there was some resistance but it unscrewed ok. anyway i got a new heat block and for the new one, I could unscrew the nozzle cold and it unscrewed without resistance. i did a few prints and was able to do a nozzle swap with no issues.

[@independentsoldier4274]

yep same thing happened to me.China made shit with no instructions and zero insite

[@Quetzalcoatl0]

Hey creality, when can we get a 0.2mm nozzle ? I have the one version. Ignore my comment on the other video.

[@crealityafter-sale5706]

Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: [e-mail])

[@sergeyivanov3690]

Что за смазка, после ее использования я смогу открутить сопло?

[@crealityafter-sale5706]

@@sergeyivanov3690 Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: [e-mail])

[@akbaragill00]

I just want to change the nozzle, how can i do that ? Like just just the nozzle and not with the pipe thing

[@crealityafter-sale5706]

Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: [e-mail])

[@Gabriel-ok3ew]

Whey do you heat up the nozzle before swapping it? My printer gives me an error when I remove the nozzle and starts to cool down as soon as I unscrew the nozzle

[@crealityafter-sale5706]

Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: [e-mail])

[@disabledbread9455]

They are just retracting the filament which heats up the nozzle

[@enrique7934]

Do You have to remove the ptfe tube from extruder before installong?

[@crealityafter-sale5706]

Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: [e-mail])

[@Eples]

Silicone grease? The printer I bought only came with metal grease.

[@crealityafter-sale5706]

Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: [e-mail])

[@adamcboyd]

My heatbrake didn't come out with the nozzle. What am I missing?

[@crealityafter-sale5706]

Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: [e-mail])

[@MaykeV22]

Is the creality K1 (normal) compatible with the new "unicorn" nozzle?

[@crealityafter-sale5706]

Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: [e-mail])

[@independentsoldier4274]

hi if u encounter anyone other then an asian please contact our support…