Service Tutorial | Vended Control Test Mode

[@marshallpetrisor9600]

Do you need to go through all the tests or can you just press 1 until you’re at the test you need? And can you end the process after that one?

[@GirbauNorthAmerica]

You can just press 1 until you are at the test you need. You can end the process at any time by pressing the stop button.

[@syararr4071]

Hi sir . Wanna ask you how to solve my girbau washer alm var0

[@GirbauNorthAmerica]

@GirbauNorthAmerica 7 months ago Which model machine do you have? Here is a link to the common error code descriptions on our E-Series washers: gnalaundry.com/pdf/support/ST101.pdf

[@MindKontrolleProject]

On a 40lb washer, the display is 0001. Could you tell me what it is? How to reset?

[@GirbauNorthAmerica]

Hi Mike, Your local distributor would be able to help you troubleshoot this issue. You can find them in our distributor locator: cgilaundry.com/distributor-locator.html

[@thachphan8836]

What does it mean when 20lbs washer displays UATO?

[@GirbauNorthAmerica]

Which model machine do you have? Here is a link to the common error code descriptions on our E-Series washers: gnalaundry.com/pdf/support/ST101.pdf

[@brahimbrahim-ep7gd]

How to program