Service your Yamaha YZF-R3 at Home. Step By Step Tutorial.

[@SunnyDarkoShow]

Best by far. Other videos make it difficult!

[@camgehringer]

Thank you! That’s how we do things around here. Keep it simple, but do it right.

[@eboldt]

I've been searching like crazy how to reset the oil light and finally found your video so thank you so much! Ride safe brotha

[@wuvvbernardo9353]

Easy tutorial no bs! Simple words nice video mate !!!! 🤝❤️

[@AussieMoto]

Thanks mate, much appreciated.

[@wuvvbernardo9353]

@@AussieMotoany time mate ❤ 🫡

[@SunnyDarkoShow]

Great Channel, its your Thumbnails that are holding you back. Experienced youtuber here x

[@camgehringer]

Thanks for the tip. There’s a new bike coming and I’ll be back into the vids and will put some time into thumbs.

[@paulasch1104]

Omg thank u so much for that explanation! I have nobody around me that’s into bikes and could show me but I love doing stuff on my own!! Thats real helpful

[@camgehringer]

Glad I could be of some assistance! Hope your servicing and your bike are going great!!

[@lukezhang3715]

This is the video that convinced me that I can do it myself too! Ordered my oil change package last night and can't wait to do it. Thanks mate.

[@AussieMoto]

How did it go? No dramas i’m sure?

[@lukezhang3715]

@@AussieMoto Was worried a bit that I might need a grip strengthening tool and a few weeks to unscrew the filter, but turned out OK. Everything worked fine in the end😃

[@thepenguin1562]

I had to buy a filter wrench because the previous owner of my r3 torqued it to well over 100nm for some reason, same to the sump plug so had to replace that too 🙃

[@AussieMoto]

That’s a fair enough reason to use a filter wrench, you’re excused! 😂😂

[@yvngxbambi4575]

@@AussieMotono not good enough. He must be a man😤😂

[@Zemmyz]

I knew working on my wank arm would come handy one day

[@AussieMoto]

It’s not because we want to, it’s because we have to. 😂😂

[@covid2080]

Thanks mate saved me 300 bucks

[@theradioattheendoftheworld4251]

Awesome vid aussie!

[@girlandherguitar]

Loved those safety gear sandals! I just traded my 2011 CBR250R for the “bike of my dreams”, a 2022 R3 60th Anniversary Edition. Wow. I love it. Just under 1000 kilometres in just over a week. I plan to do all the servicing myself but am sitting on the fence for the first service and may take it to my local dealer for that one. Great video! Subscribed.

[@AussieMoto]

Bloody beautiful!!!

[@Moto_Ryder95]

Typical Aussie Dad!! I love it 😂😅

[@Vtecyo81]

Thankyou so much, it's so easy & I am definitely doing my own oil & filter changes myself from now on!!!!

[@AussieMoto]

My pleasure!

[@itznottoah]

Thanks mate this is bloody awesome! 🤣

[@crimsonn.outlaw]

Thank you!

[@fredeal_6782]

I was about to change the oil because the indicator window showed there was no oil but I didn't know it needed to be upright to show the right amount 😅😅

[@blackdiamond_7659]

I found this guide very hard.. every time I try to watch it in the garage on my phone it gets to around 10seconds into the video and then have to turn my phone off and go outside. Any advice on how to get past that part?

[@camgehringer]

Lol…. Sometimes you need to ignore good advice, just for a few minutes to get the job done!! 😂😂

[@PUKUCHUU]

Nice

[@shrinathbhistannavar2729]

good job

[@AussieMoto]

Thanks!

[@jesselozoya2794]

Thanks man💪🏽

[@AussieMoto]

My pleasure!

[@kingtaeng4814]

what mount did you use to attach the quad lock?

[@camgehringer]

Normal quad lock mount, the just have to loosen the brake lever and move it over a tiny fraction so it fits on the clip-on.

[@tech_knowledgy]

Hey man, I bought my bike 2 years ago but haven't changed oil since I haven't ridden my bike much still only 1000km on the bike. Do I need to still change oil even though haven't used much? Mainly sits in rhe garage.

[@camgehringer]

Yep. Always 2 factors that contribute to reduced oil quality - time and miles. That’s why service intervals for new vehicles are always either by miles or time. You should change the oil every year at least, regardless of how many miles she’s done.

[@sergey6907]

Здравствуйте, какой обьëм масла вы залили, жду ямаху r25 не знаю сколько заливать.

[@camgehringer]

It will tell you in the owner’s manual when you get it.

[@sergey6907]

Он приехал без руководства​@@camgehringer

[@Whmst]

appreciate it brotha!

[@AussieMoto]

Thanks mate! My pleasure.

[@martinkalinowski2195]

great videos mate!!

[@AussieMoto]

Thanks mate!!

[@rorisangmoale978]

Hi there, I have a 2023 R3 which I bought new and the oil light came on just after 1000 KM, any pointer of what could be the issue or recommendations.....Thank you

[@AussieMoto]

The R3 oil light comes on after a pre-determined amount of k’s not because the oil is low. It comes on to let you know you’re due for a change.

[@kushpaladin]

change the oil sooner during the first oil change. your oil will having little specks in it, basically metal shavings from breaking in the new engine. it clears up after that first oil change

[@jamesharword3739]

As much of a man that I am, this filter shit is tight af

[@AussieMoto]

😂 bro sometimes they are too tight, but it’s fun to stir people up from time to time.

[@found.4536]

Great video but what do I do with the old oil and filter? I heard you can recycle the oil some places but can the filter just go in the dumpster?

[@AussieMoto]

Drain the filter for a couple of weeks, upside down, into your oil drain pan, then it can be thrown away. Or talk to your local mechanic and see if they mind you dumping a couple litres with them every now and then.

[@FleXiTun]

Should i take in my bike for the 4,000 mil(5,000 km)service? Or should I do it myself?

[@AussieMoto]

Get into it and service it!! If you’re unsure then book it in but it really is as simple as I show in this vid.

[@ParadiseBiker]

Your sense of humor alone have me cracking up😂.. #BeAMan

[@reeze_09]

I bought a new R3 and the dealer didn’t give me the Manual book

[@AussieMoto]

You can download it, just google it.

[@kushpaladin]

what u need the manual for? my manual says the oil filter needs 17 N.m (13 ft lbs) and oil drain bolt needs 20 N.m (15 ft lbs) but i never torque them. i just tighten with an adjustable wrench

[@Lostandfoundhere]

guitar and bike. u r me!! 👍

[@AussieMoto]

Haha thanks!!

[@durrymcflurry3028]

Super helpful, cheers mate love the jokes too haha

[@Vtecyo81]

How many litres do you need to do a oil change??? Awesome video!!!

[@AussieMoto]

2.3L is all she needs. (A little bit less if you’re not also changing the filter - but it’s easy and cheap so you might as well always do filter.)

[@DanielHernandez-jx8zy]

some one know about it the torque on sump lug

[@kushpaladin]

tbh torque isn't necessary just tighting it is enough but manual says oil filter = 17 N.m (13 ft lbs) and drain bolt = 20 N.m (15 ft lbs)

[@001Yome]

U r hilarious dude loll

[@AussieMoto]

😅 thanks mate. 👊