How to remove turn signal lever / wiper switch VW Golf Mk4, Bora, Jetta, Passat, Polo, Octavia

[@michaelbarr6187]

I found this really useful, except it doesn't explain that you need to centre the clock spring, with the wheels central before replacing it. If you don't, the clockspring internal cable will break when the driver locks the wheels to one side or the other. Found that out the hard way :)

[@fikibiff]

Thank you for the video. My daughter's Bug has been buzzing very loudly. We first replaced the hazard relay switch and it didn't do much to help. We then sprayed an electronic lubricant in at the base of the stalk. That helped a bit, for a while but the buzzing eventually came back. Then, last week she had a bit of white smoke come out from behind the speedometer. Knowing that this signal had been a problem, presumably from a short, we are hoping replacing it will solve the problem. I cannot see any charring on any wires anywhere, but fingers crossed this will be it. I've got the part on order and will have to put it all back together next week.

[@Servicetutorials]

Thank you for watching and good luck!

[@bojanbosnjak420]

Thanks very much. Very usefull. Just moment where you take airbag box you should record unpluging the wire from the box. .... And SDI 98 doesnt have one plug on your video. Cheers

[@bojanbosnjak420]

And i think im one thousanth.

[@victorjan486]

Mulțumesc pentru videotutorial! Mult succes si spor la treabă!

[@Servicetutorials]

Victor Jan Multumim si noi ca ne urmaresti!

[@ericcohen5967]

Thanks for the video. My dealer mechanic has diagnosed the problem with my 2003 Jetta to the wiper switch on the column. $700 to replace so I’ll try to do this myself. Your video is great but doesn’t show the final steps how to change the column lever for the wiper. Is it fairly easy to exchange once this assembly is in your hands? Wiper issue is that they turn on but won’t turn off or adjust.

[@acmurda84]

Thank you so much , I plan on doing this job tomorrow.

[@Servicetutorials]

Thank you for watching!

[@Moncho68]

Thanks a lot from Barcelona SPAIN

[@Servicetutorials]

Thank you for watching!

[@danielgriffith2636]

Thanks for the videos! So I've got a problem with my wipers on a 2000 jetta I bought for my son. They start and don't have the power to complete a rotation. I have changed the wiper motor and the 377 relay but it still hasn't fixed it. Is the issue the actual W/W lever on the side of the column? Do you have a video where you change that? Or is there something else I can check into without just throwing more parts at this car?

[@Servicetutorials]

Hello! Maybe you have a problem with the assembly.

[@bieganowsky]

Is it possible to change only wiper switch ? On sale are available separated both signal and wiper...The thing is, that wipers switch is clicking and can't stop wiping... I see for amateur its too hard to replace it anyway...

[@Servicetutorials]

Hello! Yes, you can replace just the wiper switch.

[@shanetalke468]

Been a great help thanks.

[@Servicetutorials]

Thank you for watching!

[@cerrajeriamultllaves]

I have one that does not turn the key as is done in that case so that the key turns and can be repaired?

[@Servicetutorials]

Yes, it can be repaired or replaced.

[@BlackJackPOL]

Is it possibly to take off only signal lever/light switch?

[@Servicetutorials]

Yes, you can but first you have to remove both of them and then separate them.

[@BlackJackPOL]

@@Servicetutorials Thanks I have replaced the signal lever/light switch put everything on, but once connecting the battery (-) and turning on the key the horns turns on, do you know what could be the issue ?

[@lkjkjhkjh5363]

Hello man, on my vw polo everything is working but long lights. THis looks very complicate to change is just because of long lights. Is it possible that something else is wrong other then lever?

[@AlexanderAnayaZambrano]

Hi . cordial greetings, well I have done all the steps you have done, but the airbag warning light on the dashboard does not go off. There is an important step which is the wheel that rotates with a yellow dot that must be left in the center, I have left it that way but nothing, the witness remains on, I don't know what to do I need your help please, what do I do? well remove the rudder to change the intermittent crossover lever and connect the three connectors in fact I have tested both levers and they work correctly, I need your help please, thank you very much

[@Servicetutorials]

Hi, Alexander! Did you check the connector from the bottom of the seat? I suggest that you make a diagnose to see the exact problem for your car.

[@AlexanderAnayaZambrano]

@@Servicetutorials Hello, thank you for answering, I changed the intermittent turning lever to the car, I did all the steps that you do in the video, to be able to change the lever, and I repeated the assembly steps, but the airbag warning light it does not turn off, is it normal for this to happen? Will I have to erase the error with a scanner? The same thing happened to you when you disassembled everything and when you reassembled everything again?

[@Servicetutorials]

@@AlexanderAnayaZambrano Usually, when you remove something like that, the airbag warning light appears, but you can erase that using a scanner. But first, you can try to drive the car for at least 10-15 km and see if it's turning off.

[@oscarromero9858]

Hola tengo un vento variat tdi y me quede sin bosina y sin controles en el volante revise los fusibles estan todos vien

[@paintwetonwet]

At 6:10 ,- what is a 4m imbus?

[@Servicetutorials]

It's a 4 mm hex key or 4 mm allen wrench

[@dieselbourbon3728]

My lights only work on high beams. I wonder if it's the switch.

[@BlackJackPOL]

Did You found the issue? I am guessing in my 2004 Bora there is the same problem. Main light switch is fine.

[@edmundasmickevicius8415]

My wipers won't swich off.what can be problem?

[@Servicetutorials]

Maybe you have a problem with 377 relay, watch this video: kzbin.info/www/bejne/ioe3aWNtbs94iM0

[@keaganbarnes4629]

Great. Now how do I take those apart to add a new cruise stalk.

[@Servicetutorials]

Keagan Barnes kzbin.info/www/bejne/hZLFqZywrM2trpY

[@cenariusbg]

@@Servicetutorials WTF This is a link to the very same video :D

[@yungjavier]

@@cenariusbg did you figure it out

[@cenariusbg]

@@yungjavier Yeah I changed mine long time ago.... How I do not remember - should not be something very hard. If I did it, you should be able to do it really easy!

[@yungjavier]

@@cenariusbg haha thanks for responding 👍

[@svh6195]

Thanx

[@DRAINTVofficial]

My steering column adjustment is stuck. Any tips how I can fix that?

[@Servicetutorials]

It's stuck because of the ignition lock.

[@waelfagiri7877]

So nice, well done 😉

[@Servicetutorials]

Thank you for watching!

[@andresosa8419]

Gracias por el video

[@Servicetutorials]

Gracias!

[@barozanul2]

Mulțumesc

[@Servicetutorials]

Multumim si noi ca ne urmaresti!

[@Righteouness]

My blinker when indicating right, will sometimes become random with being erratic. What is the problem with this?

[@Servicetutorials]

Maybe you have a problem with the relay, but to be sure, you can do a dyagnose for your car.

[@Cube8]

@@Servicetutorials I have the same problem with my left turn signal. I have replaced the relay but the problem persists. Any ideas?

[@Righteouness]

Cube8 I’m investing in a OB2 diagnostic tool-BlueDriver. Hopefully this will help me and you

[@markraines8138]

Intermittent then continuous fault. Pulling fuse worked until rainy season. Watched this but didn't have M12 spline remover. Took clip off indicator and filled housing with wd40. Stopped working. Bugger. But a few hours later all dried out and back to normal... Touch wood

[@wivaquif]

Is it snowing or you got a real dandruff problem

[@Servicetutorials]

Eric Snowing, of course 😁

[@wivaquif]

Understand. Just my british humour . Great video, thanks.

[@lawson9855]

My indicator stalk is stuck on a right signal

[@DCLopezmusic]

well at least the music made it seem easy to do