How to install flip emblem (badge) rear view camera for VW Golf Mk5, Mk6, Jetta in 27 steps

VW Golf Mk5, Mk6, Jetta flip logo (emblem, badge) rear view camera installation in 27 steps. This flip camera it can be fit for: VW Passat B6, Passat B7, Passat B8, CC, GOLF 6, Golf 7, Polo, Beetle, etc.
You can find the Flip Emblem Badge Rear View Camera Logo Trunk for VW Golf Mk5, MK6, MK7, Polo, Passat B6, B7, B8, Beetle HERE: bit.ly/3N7owvE or HERE: amzn.to/2OuJAmv
See More Attractive Products for VW Golf Mk6 & Jetta, Tiguan, Touran, etc. HERE:
- Dynamic Blinker LED Turn Signal Light for Tiguan MK1 2008-2016: amzn.to/3lW9Cfs
- Rear Air A/C Outlet Vent Assembly for VW Golf GTI, Jetta MK5 MK6 Rabbit: bit.ly/3lZ9Um4
- 1 Pair Left+Right Mirror Indicator Dynamic Led Turn Signal VW Golf Mk6/Jetta: amzn.to/3GyzTKs
- Flip Key Fob with Key Blade for VW Golf Mk6: amzn.to/3M1FUAx
- VW Led License Plate Light Bulb For VW Golf MK6: amzn.to/2zfYx40
Read the Complete ARTICLE HERE: bit.ly/33QvoG6
All about money that makes money. Change the game! 8 steps to know everything you need to know to get there! ---- bit.ly/3sYgQDM
If you enjoyed this video tutorial, make sure to give it a thumbs up and share it with your friends. Also, don't forget to LIKE and SUBSCRIBE!
More VIDEO TUTORIALS on www.servicetutorials.com
Follow us on INSTAGRAM: service_tut...
SUBSCRIBE our KZbin channel: / @servicetutorials
This video is only for informative purposes! We do not take any responsibility and we are not liable for any damage as a result of the information contained in this video. Use this information at your own risk. Thank you!
If you have any suggestions about new tutorials, let us know in the comments section!

[@jamesleydasse4559]

Great tutorial, covered almost everything. Never worked on a cars electronics or took trim off before. It took me 6 hours working methodically, but it worked. It would be great if there was a tutorial for taking the sill trim off of a MK6 Golf.

[@Servicetutorials]

Jamesley Dasse Thank you for your feedback!

[@rawsondenna6329]

There is a tutorial

[@earlygamer9106]

Video is 16min and the work is 3 hours (or more) Good luck😂 been there, done that. Nice tutorial btw 😉👍🏼

[@Servicetutorials]

Thank you for your feedback!

[@xMrFlair]

Dear friend, the camera I bought for my Polo has a 5A fuse on the positive. My question is whether you can tell me which slot I should use. Do I need to connect a splitter with a 5A fuse to a slot already in use or do I have to find a free slot? Thank you

[@Cleveeland]

Good tutorial, but I don’t know if I can do this myself 😂🤦🏽‍♂️

[@Servicetutorials]

Big Homie K You can try.

[@marcosesteban6393]

In the thick terminal of the car cables to the radio, have you had to remove the blue terminal that leads the yellow, green and gray cables to put the MIB connector. But then this terminal is left loose? Doesn't connect anywhere? Regards

[@unprofessionalmechanic8466]

Previous owner of my my 2012 GTI has removed rear wiper, there is a delete kit for that. I just wonder if I can take power from the connector of rear wiper? I am sure it has 12V and is fused...

[@winscho2014]

Amazing video. Thank you so much, great video. The new golf 2020 doesn't have a reverse camera so this will look good on it. I can't understand why VW dosen't have offer for camera like this. How it's hidden is so cool

[@Servicetutorials]

wins14 Thank you for your feedback!

[@kt3o5]

seriously.. thats all my mk6 needs lol

[@rich21rd]

Great tutorial honestly thank you so much. 👍 Quick question how do you connect the MIB adapter to the quadlock harness it’s not that clear from the video?

[@robshoulder5357]

Question the flip camera for golf 2013 with RNS 315 sat & radio appears to be expensive at 500 euros , 5KO 827 469 AQ . I believe it is RGB video. Golf mark 7 flip cameras appear more numerous and cheaper but assume they cannot be used with mark 6 golfs as are different to RGB . Is this the case in that you have to stick with a specific mark 6 camera .

[@Henrybird123]

looking to do this for my polo 2014 - quick question, whats the drain pipe for into the badge? incase it rains?

[@rafaelfrancisco6106]

Why it's needed to replace the drain pipe? Won't it disallow that the water that comes inside trunk to be pushed outside? Since it's now only connected to the VW badge? Also I saw that this camera has dynamic lines, do they change according to steering wheel? Thanks :)

[@billymathews8651]

Great video, everything works except the steering lines. Anyone know what needs to be done to get it working?

[@markkavcic6519]

Hello. Does anybody know if it's possible to get the camera a little cheaper somewhere? Every site I looked they're 100€ or more...

[@thomasbessi3102]

Bonjour, j’ai une Volkswagen Polo 5 de 2014 en fin de série. Savez-vous si je peux l’installer dessus ? Sachant que j’ai un autoradio Carplay avec option caméra de recul. Merci d’avance.

[@mtauto4827]

the lines didnt show up on my screen, whats the red wire connected to the rca cable plugged into the radio for?

[@billmacchione4685]

I just started this and when I replaced the badge with the new flip camera, I hooked up the normal lock power cable and had to close the trunk. It will not open now? Why not?

[@bigbasket6382]

Your content is so touching

[@JamesLee-dr3nq]

NRS510 I follow your step to connect, all are working but only the camera I see on display, the stereo look cannot rec'd my camera video signal, the blue plug, how to connect to stereo head unit? also the yellow video plug have a red cable, what are this one connect to? than you!

[@giece6237]

Hello, great video! I'm looking for flip camera for Scirocco 2015 but I can't find it. Any ideas?

[@zainnzainn]

from step 12 - 16 is it the left hand side because the driver side is the left? my car is right hand side so would i remove the panels on the right of my car? thanks

[@farhanshah2614]

11:23 did you cut the wrong wire (blue) from your tail light?

[@Liberekon]

hi can i install emblem without connecting to 12v power supply? Will opening work for me? i want to install it in stages. Thanks.

[@unprofessionalmechanic8466]

Directions with camera says pover from ACC -accessory line, not Constant. Would you please elaborate on that?

[@SOLIDROCK49]

good video. i hv the camera but could not get all the cable harness . where can i purchase the cable set?

[@quincyquincy8450]

Please help! I installed everything but when i put in reverse the camera closes in a few seconds.. and also i have a fault in my back up rear light

[@mntccd]

Does the camera bump up against your fingers when opening the trunk?

[@AnwarE13]

Did you cut the red wire with the fuse on and not put it back on?

[@rafortunado9]

Hey bro I did exactly what you did to my 2012 gti but I can’t get the camera work in the factory screen, it doesn’t show anything in the screen when I put in reverse but the camera is flipping,any advice what is the problem?

[@fuckingUtubeisgay]

At @11:25 why did you switch it to the yellow wire? When the cc states blue wire??? Was the blue wire the wrong one????

[@racky1158]

What fuse did you tap into?

[@YordiRecords]

I did what you did. My trunk opens, but when in reverse the camera doesnt flip.

[@ronin5020]

Will the camera install on the Passat (2012)?thinking of gifting this and a new stereo for my sisters car 🤔

[@mwmhd4093]

How do you get the distance grid lines to show

[@ainee325]

will this work with a 2012 VW Tiguan S?

[@evovanner]

Would this fit on a 2008 VW touran .?

[@georgesierros2759]

Does it fits in the Scirocco 2010?

[@larky_7570]

How did you get the RCA (video) cable from under left plastic part of the car to behind the radio head unit?

[@Servicetutorials]

You can do it with your bare hands, but you need another person to help you to reach the cable.

[@cpukid00]

thanks for the video! Would you be able to tell me what model Golf this video was performed on? I have my reverse camera arriving tomorrow, and am just making sure I understand the fuse layout. My car is a 2012 MK6 GTI, and am wondering if fuse 16 (as you used in this video) would also work for my model. Thanks!

[@Servicetutorials]

Hi, Bob! The car uesd in the video is a 2010 VW Golf Mk6 1.6 TDI.

[@AngelZuniga831]

Any special programming needed to make the camera work on the stock radio?

[@mehmetkara9478]

Did u have R-Line Raul lights on?

[@oscarmu901]

Do they have one for the mk7

[@mocromocrolux1111]

Vous avez ou le garage de quelle ville merci

[@gamingkicks1921]

Since I unplugged my battery, my camera is coming up with an error does anyone know how to get it back working

[@danipopo9904]

C'est possible sur Polo 2011

[@benibarra4808]

I am looking to doing this to my mk6 golf, however, I also want to install the Alpine i902D-G6 head unit. I'm looking at the link provided to the aliexpress website with the trunk handles, but see a few different options for the mk6 golf. Would I need the RGB version to work with the Alpine i902D-G6? Or could I get the RCA version? If there is no option to work with the Alpine head unit, that is fine, but I figured there would be a way since the head unit is plug and play.

[@Servicetutorials]

Hello! You have to ask the seller for the details.

[@Punxe]

Good job.Thanks friend

[@Servicetutorials]

Thank you too for the feedback!

[@jooklum]

Did anyone need to code in the camera or did it work without?

[@arsjanmurat3081]

Hello i have a vw golf 6, I have installed an after market 2din radio (podofo) with canbus included. Can I wire the powercable to the back of the radio to the reverse wire (positive) instead of wiring to the fusebox?

[@suemason]

No it won’t turn off with the car

[@erichill7560]

mk5 golf has to have metal cut, right?

[@user-nb1bd3dq5u]

hi guys! installing on G5 is not so quick and safe, in case trunk of G5 and G6 are different you should remove one part of rear window cleaner holder and delete metall holder’s pin at trunk

[@blackpinksvelvet6125]

Did the car screen have a backup camera setting or does it come up by itself when you install it

[@Servicetutorials]

When you buy a rear view emblem camera, you have to have a RCD330G or something similar to work and you don’t have to install nothing.

[@fadapow952]

tried installing a VW flip camera on my 2013 VW CC using an aftermarket head unit, the head unit works, but I cannot get the camera to flip open. Any suggestions?

[@Tito8149]

Same issue you every find the problem

[@skeelo69]

Does this method apply for the VW Eos and will it work right off the bat if connected to the RNS 510 radio ?

[@anastasiaclavette9210]

You may need VCDS to activate the feature and program your system to use it with the RNS 510. Not all radios have this feature available. You should research your radio's features before committing to purchasing this upgrade. Good luck.

[@ash9ine]

How would I know if the reverse camera will work with some head unit which had Apple car play?

[@Servicetutorials]

Hi! You have to read the features of the product before you buy it.

[@georgieporgie7523]

First I must say very good video, I like to know did you replace an old camera or this was a new installment?

[@Servicetutorials]

Georgie Porgie Hi! This was a new installment.

[@kareemm-h9568]

@@Servicetutorials I’ve got a unit that needs fittings but not sure where to go to get it fitted. Can you assist? Happy to travel, I’m in London

[@andrejsapik1581]

On the video shows positive and negative wires is going to fuse box,where i can get this special connection for the fuse box or where is the best to connect positive and negative wires?

[@Servicetutorials]

The best way is to put them like I do in the Video tutorial.

[@lego_cookie_runner]

which radio unit did you use to connect the back flip camera to?

[@Servicetutorials]

RCD330G

[@MrOmer123]

how do you move the wires from the fuse box to the radio? i can't figure it out, this is the only thing last to do. my kit is a little different i can't disconnect it I have to move all the wires from the fuse box to the radio.

[@jamesleydasse4559]

The fuse wires connect to the camera emblem not the radio. Only the RCA plug port adapter connects to the radio.

[@alexrollini]

It looks like you unplugged the other blue connector to put in the RCA adapter, What are those other wires for? Isn't it possible to just take the RCA wires and add it to the already existing blue connector and keep everything plugged in? Also, how did you feed the wires from the driver side to the back of the head unit?

[@Servicetutorials]

Hi! Maybe you can find the answer on our website: www.servicetutorials.com/en/2019/12/04/tutorial-how-to-install-flip-emblem-logo-badge-rear-view-camera-for-vw-golf-mk5-golf-mk6-jetta-in-just-27-steps/

[@gregwatson8246]

They used a (foreign market) head unit that doesn’t utilize the original blue connector wires. But yes, instead they could have transferred the pins from new plug to the old plug.

[@colt11mitsi]

Great tutorial, quick question, would like to do this for my mums 2005 mark 5 1.9TDI VW Golf, will camera connect to original head unit or will I have to update head unit. Thanks again

[@Servicetutorials]

Hello! What kind of original head unit you have?

[@colt11mitsi]

Thanks for the reply. I really dont know what type the original VW headunit is. It has buttons down each side of screen a cd player at top, it is not a touch screen. Is there some identification numbers on it somewhere?. Thanks again

[@hashimyounas3373]

@@colt11mitsi u might need a new head unit

[@Servicetutorials]

@@colt11mitsi The flip badge camera it’s compatible with big screen radio units. Check the product details or ask the seller if you don’t know if it’s compatible. Sorry for the late response.

[@kareemm-h9568]

@TUTORIALEAUTO thanks for the video! Do you know where I can get this done as I don’t know the first thing about car electrics! i have the emblem unit with all the parts, but I just need someone to fit it! Any help will be great - I’m based in London but happy to travel somewhere, thanks

[@SpicyPumpkin99]

Also in London. Have you sourced one?

[@kareemm-h9568]

@@SpicyPumpkin99 yes based in London. Currently being quoted £200 to fit it. I’ve got the part, just need it fitted.

[@Servicetutorials]

No, sorry

[@esoghumedominic13]

Good video, gives all details, if I run the pawer fuse straight to radio power supply will it still work perfect?

[@Tito8149]

I tried it and didn’t but I don’t have VCDS enable for rear camera

[@esoghumedominic13]

I powered mine from radio supply and it work perfect, brown and red wire, brown for negative (-) and red for positive (+)

[@marcusbrunzell656]

Do you know if this camera is compatible with a kenwood ddx?

[@Servicetutorials]

Hello! You have to ask the seller or you can check the product details.

[@boyong9542]

Good video... Hi, I have some question for you, I have install the camera, but the connecting to my RCD 330 can't dirrect connect, it still need of RCA converter, isn't right? any one can help me to fix it, pleae? can I get your email address to detail communication, please! Thank you very much

[@onetwothree1987]

There is a short red wire on the RCA cable (RCD330 end). Where does that connect to?

[@robbyalders5164]

That is a good question do you already know?

[@kaptenmesut5151]

in this case its not needed but in some cases you can connect camera power cable to it and other end goes to stereo where it has power + out for cameras so you dont need to ”borrow” power from revers light

[@gregwatson8246]

The red wire on either end of the RCA video cable is just a wire that travels along the length of the cable. It can be used for different install requirements such as sending reverse light signal from rear of car to front of car for a after-market head unit that needs a reverse signal to trigger the display, (the VW factory harness provides a reverse trigger signal, so the red wire is not used), the red wire can also send Acc-12v from front of car fuse panel to rear of car to power the camera, (this guy used 12v from the rear of car like wiper motor, etc, so the red wire was not used). Simply, the little red wire is used to send power from front to rear or vice-versa. Most times it’s not used in factory setups, because the factory harness provides reverse signal to the head unit and the camera gets power from the reverse light.

[@C4RSBERaif]

Does this work with oem vw infotainment screen on 2017 polo?

[@andreigherca8958]

Just take the infotainment screen out and check the back of it to see if it has an input for the camera

[@myshuker1978]

Thanks friend but how to activate the screen when you put revers gear??

[@haroldbutler778]

I don't know what your asking but when you wire the reverse light as signal to turn on rear camera

[@boogati9221]

Do you need to buy extra parts to attach the ground wire to the grounding bolt in the fuse box? It looks like you have the wire attached to a metal ring to contact the bolt, is that already in the car or something?

[@Servicetutorials]

Hi! You can find all the information here: www.servicetutorials.com/en/2019/12/04/tutorial-how-to-install-flip-emblem-logo-badge-rear-view-camera-for-vw-golf-mk5-golf-mk6-jetta-in-just-27-steps/

[@RagucciDoko]

Where you able to solve it on another way somehow? If so could you tell me how you did that?

[@Kawi650rguy]

The red wire that is on the yellow cable for video. Where does that cable go to?

[@IzzYChannel]

Did you find out by any chance? I’m dealing with the same thing right now…

[@ramosva4023]

where logo power connct to coz my logo conection different from my oem logo

[@Servicetutorials]

www.servicetutorials.com/en/2019/12/04/tutorial-how-to-install-flip-emblem-logo-badge-rear-view-camera-for-vw-golf-mk5-golf-mk6-jetta-in-just-27-steps/

[@97jackbmx]

Did you have to install a “ Delay box”? And if you did could you please do a video on how to install?

[@Servicetutorials]

97jackbmx You don’t need a delay box for this rcd330g unit.

[@adamdiamond0]

@@Servicetutorials will you need one for rcd330+ (earlier unit). Also I'm getting a black screen instead of camera image, any ideas?

[@ginoferrari8718]

@@adamdiamond0 I get black screen that says camera not available. Did you solve this?

[@miroslavhrncir4752]

Hi, I have a problem with my G5 emblem trunk. I want to bay some new, did you thing is same for G5 and G6 dimensions for the screw?

[@Servicetutorials]

Hi! When you find the product look for the specifications to fit for VW Golf Mk5.

[@AluzJunior]

You know if there's a way to install flip camera on Passat Variant b7?

[@Servicetutorials]

We don't know. Sorry!

[@Marko_Kostic]

I wanted to ask the same question...

[@asdf-sx3el]

Bel video grazie

[@Servicetutorials]

Grazie!

[@bigfaxnocap5749]

where do you get those plastic pry tools from??

[@Servicetutorials]

Hi! You can find them HERE: amzn.to/30b9Ofx

[@mmminecraft9602]

This video is very usefull

[@mmminecraft9602]

!

[@Servicetutorials]

Thank you for your feedback!

[@rasheenlindsay4861]

Would this work on 2012 VOLKSWAGEN JETTA S

[@Servicetutorials]

If you have a flip emblem on the back, yes, it will work.

[@NasirThompson]

Can you install this on mk5 Jetta with rcd330?

[@Servicetutorials]

Hi! Before you buy the flip rear view camera, check if it’s compatble with your rcd330. Check the details from the product.

[@aymenem5304]

Guys i have a question I need to change the tailgate on my golf 7 2017 I’ve found one for sale same color but without camera My golf have a rear camera Is it possible to buy the new tailgate without a camera and install. The old camera on it ? Does it work Any one tried it ?

[@Servicetutorials]

Ayoo Boston Yes, it will work.

[@Tito8149]

That red cable that goes with the yellow RCA where does it go ???? I installed everything but that cable is loose

[@zuidkb7312]

Did you figure this out? I have the same thing.

[@emrekonuk1525]

@@zuidkb7312 Same...

[@mrlele6580]

@@emrekonuk1525 Saammmeee

[@emrekonuk1525]

@@mrlele6580 just tape it off so it touches no metal. If you hook power up via your fuzebox and the 3rd short cable to the reverse light. It will work

[@chroniccrypto75]

Hey guys and girls I’m just wondering if these can be adjusted because mine seems like it doesn’t open enough because the red lines don’t show up and it just looks too far down. Can it be adjusted to look up more or something?

[@Servicetutorials]

Hi! I think not.

[@chroniccrypto75]

@@Servicetutorials that sucks I’ll probably have to get another one then

[@sumitmunshi5731]

do the lines onscreen move with your steering wheel?

[@Servicetutorials]

Yes

[@gregwatson8246]

TUTORIALE AUTO Does that require 2 additional CANBUS wires installed into the harness, that you did not show ?

[@luigiprisco7606]

Good evening, I bought a Fettoca rear view camera in the Vw logo to be installed on Android Auto Erisin. Despite having connected all cables as instructions. I always see black. Can you help me?

[@Alex-lw9cq]

Hi, I have also the one from Fettoca (OBD Guidelines). If the black screen is with an error message "Camera not available" check the black video connection cable (plug/unplug again). If the camera flips but the image stays black, one of the two power cables for the camera is not connected to 12V properly. In my case I have 3 power cables *2 red and 1 blue. 1 is for the lock, the other two for the camera (+2 black for ground). I had both of the above mentioned Issues and could solve them with properly connecting the cables (make sure also that when the trunk is closed the reverse light is on). I am struggling with only one Issue now: The camera flips open on ignition (possible due to the reverse light check), after some time it closes automatically and functions as expected.

[@Servicetutorials]

Hello! Maybe you need a time delay device box. Check the product details to see if your radio unit it’s compatible with rear view camera. Sorry for the late response!

[@Alex-lw9cq]

@@Servicetutorials Hi, i've tried installing signal filter, which had no effect on the behaviour... My Radio is rcd330+ which is compatible with the camera and via vcds the camera is coded. I couldn't find the delay box as everyone says that rcd330+ doesn't need it... When the reverse light is not connected there is a video, but the badge doesn't flip, when the power is not connected the camera flips but there is no video and etc.

[@VamteTamte26]

@@Alex-lw9cq you have to disable the cold diagnostic check with OBD2 (Golf 5) or VCP (Golf 6 - EEPROM), VAG Cars are checking all Lamps of funcitonality on ignition

[@Alex-lw9cq]

@@VamteTamte26 thanks for the information. I have only OBD11, and was searching for this, but couldn't find it. I guess I will look for someone with VCP to turn off the cold check. Cheers!

[@ludababy1622]

So i have an Mk6 GTD and I dont have an camera on the back, I can still install this right ?

[@Servicetutorials]

Yes, you can.

[@ludababy1622]

@@Servicetutorials Even if I dont have an camera right now ? 😄🤗

[@Teh1LinE]

I have 1 screw left after installing everything. To Lazy to watch the whole video again, Someone please timestamp me all the screws, thanks

[@fabioferrari3735]

Good morning, I installed the aftermarket camera and everything works fine. The problem is that every time I turn on the ignition the camera opens for a short period, due to the check lights. Is there any way to solve it? It's annoying that it opens every time I turn the car on, even if reverse gear isn't in gear. Thank you

[@Teh1LinE]

Same with my car

[@Teh1LinE]

any Volkswagens have a function called light self-check. When you insert the car key, the car will start the light self-check to determine which bulb is damaged. If any bulb is damaged, the dashboard will show that the car bulb is damaged. This is a function that Volkswagen has opened for driving safety considerations. In this self-test, a current will be transmitted to the reversing light bulb to judge whether the light bulb is good or bad, and at the same time, this current will activate the flip motor.

[@fabioferrari3735]

That's exactly how it is. I researched it and came to the same conclusion. Furthermore, the byte (I think 19) is not configurable on my golf 6, and therefore it is not possible to disable the light check. Thanks for the reply

[@leafar96]

Thank you for the video! I followed the installation instructions and all works well, but one thing: the trunk emblem lid used to open the trunk when the car was unlocked, but now it only works when the car is unlocked AND the key is in the ignition (aka when the car is ON). Still works fine to use keyfob or door button to open the trunk. Any help?? The problem seems to be that the non-camera trunk latch Emblem system's power only turns ON when the car is ON (unlike the other doors and lights in the car)

[@Servicetutorials]

Thank you for watching! Did you follow these steps exactly like is showing in the video tutorial? www.servicetutorials.com/en/2019/12/04/tutorial-how-to-install-flip-emblem-logo-badge-rear-view-camera-for-vw-golf-mk5-golf-mk6-jetta-in-just-27-steps/

[@leafar96]

TUTORIALE AUTO turns out I had plugged into a fuse location that only turns on when the car turns on! Thanks!

[@user-vx9on9bu2b]

That signal red wire on the RCA cable, where did you connect that?

[@YAORG]

@@user-vx9on9bu2b on my HU (cheap Android) there‘s a wire in the connection harness, which says „rear“. In my case it‘s delaying the closing of the camera a bit.

[@tomtheturtle6850]

Hey i installed mine works well, but when I try to unlock the car, it doesn't unlock the boot unless I use the boot release button. Any ideas on how to fix or what the issue is.

[@Servicetutorials]

Hi! I don’t know, sorry. Maybe you have to check the wires from the boot.

[@davidgeorgerankin]

Do you have a link for the set you are installing?

[@Servicetutorials]

Yes. You can find the product here: bit.ly/39HnenQ

[@Servicetutorials]

Hi! If you are from Europe, UK, you can buy it from here: amzn.to/35enA3d If you are from US, you can buy it from here: amzn.to/34OVGuw

[@paulgreg9590]

Would that back up camera badge fit a vw polo 2010

[@hashimyounas3373]

I’m sure all the sizes are the same

[@Servicetutorials]

If you have a back flip logo on the trunk, yes, it will fit.

[@xFuSioNClan97]

Hey do you have a link for the camera pls ? I’m from there UK and I owe a golf GTI mk5

[@Servicetutorials]

Hello! You can find here: bit.ly/31s5KZJ

[@xFuSioNClan97]

TUTORIALE AUTO thank you!! And is this a reliable seller and will it 100% work with my car ?

[@Servicetutorials]

@@xFuSioNClan97 you have to check if your radio unit is compatible with the flip badge camera. Check the product details or ask the seller.

[@xFuSioNClan97]

TUTORIALE AUTO I have a after market RCD330 plus headunit with car play and reverse screen

[@mv.m5438]

Can someone help me out??? Where do I connect the red wire that is attached to the RCA cable?? My camera opens when I put it in reverse but I don’t video.

[@Servicetutorials]

Hi! If you have a RCD330, you don't have to connect the red wire at anything, but you have to connect the blue wire from the power cable to the reverse wire from the tail light harness.

[@mv.m5438]

TUTORIALE AUTO yes I did that just as your blog said but I still don’t get video on the camera.

[@mv.m5438]

I get a message that reads “Rear View camera system is currently not available.

[@Servicetutorials]

@@mv.m5438 Please, follow these steps: www.servicetutorials.com/en/2019/12/04/tutorial-how-to-install-flip-emblem-logo-badge-rear-view-camera-for-vw-golf-mk5-golf-mk6-jetta-in-just-27-steps/

[@marcosesteban6393]

@@mv.m5438 did you solve your problem?

[@letsplayagame83]

Thank you for the video it is so helpful I have golf 6 with RNS510 what connection do i need?

[@Servicetutorials]

I think that you will get the connection for the RNS510 when you buy the flip camera. You just have to mentioned that you have the RNS510

[@letsplayagame83]

@@Servicetutorials mulțumesc

[@szakos2094]

Hi, Great video and I installed in the Golf 5. Camera power has constant 12V power and reverse wire I connected to the Head unit "reverse" wire instead of the reverse light. Work well but I have just one problem. If I switch to ignition ( dosn't matter I start the engine or not ) the logo come out like in the reverse mode ( shift is not in reverse ). After the "waiting" period go back. This is happened always after switch to ignition. Other case camera work well, stop the engine in reverse mode take out the key, camera goes back etc. I don't connect the red wire what is in the RCA connector based this label is for DVD. I also tested without ignition take out the camera fuse and put back bat in that case nothing happened. So camera goes out and back when I switch to ignition and I don't find why. Do you have the same issue ?

[@michaelyimingqiu]

Have you solved your problem? If yes, how?

[@AnwarE13]

I’ve got the same problem with mine. Any help please

[@michaelyimingqiu]

@@AnwarE13 I think the only way is as others said, program the car NOT to do the automatic lights checking

[@AnwarE13]

@@michaelyimingqiu sorry what do you mean by that?

[@michaelyimingqiu]

@@AnwarE13 Someone commented with this message as below. That's the only way to solve the issue. ----------------- @Daniel Bralic 1 year ago you have to disable the cold diagnostic check with OBD2 (Golf 5) or VCP (Golf 6 - EEPROM), VAG Cars are checking all Lamps of funcitonality on ignition ----------------- So the reason is when the car is started, it will do an diagnostic check to see if all the lights are working including the reverse light, which triggers the reverse camera

[@jaysee8327]

What model radio do you have? Thanks for the instructional vid :)

[@Servicetutorials]

J C We have a RCD 330G

[@basmesman3805]

@@Servicetutorials what is the difference between the rcd330 and the rcd330G?

[@Lachlanwilliamburt]

Excellent video when muted. Closed boot mid installation and now can't open boot. Will this be fixed when power wire is connected to fusebox?

[@jamesleydasse4559]

Same thing happened to me, had to use emergency release. Once I connected to fuse the boot opened as expected.

[@rareshh19]

Hi! Very nice video but I have a question! I want to install into a old golf v with rcd330 with CarPlay. How do I open the trunk? I still can open the truck by rotating the camera? Or do I need to modify this too? Thank you!!

[@Servicetutorials]

rareshh19 Hi, Rares! You don’t have to modify anything. You can see the romanian version here: kzbin.info/www/bejne/bXzCc6ShmteYpJo

[@rareshh19]

I saw the Romanian version after I posted but still don’t get it I can still manually open the trunk by rotating the logo (camera) ?

[@Servicetutorials]

rareshh19 Yes, you can do it normally, using your hand.

[@rareshh19]

Thank you!!

[@moe.4l]

Guys I’m stuck. The camera doesn’t come up when I put it in reverse also I soldered the cable correctly. Plus badge isn’t going back in when I put it in gear..

[@Servicetutorials]

Probably your cables are not connected correctely.

[@Johnsmith-uc9df]

Can you still open the boot with the emblem

[@Servicetutorials]

Yes, of course. It will work in the same way with the old one.

[@serbianwolfgaming9623]

Can we make this at home by using original parts?

[@Servicetutorials]

Yes, you can.