This video is exactly what I was looking for! Clear and concise. I am brand new to snowboarding and this is the best tutorial I've found so far. Thank you so much!
@EriksBikeandBoardShop2 жыл бұрын
@Amanda Walding, we are stoked we could help you out! Have fun out there on the snow! Check out our instagram and tag us in post if you have one! We do monthly give aways!
@AdamWynn2 жыл бұрын
This is the most helpful binding set up video I have found so far. It has up-close photos + overhead view of what is actually going on. I just picked up snowboarding in Feb of last year, and this video helped me correct my setup, ensure consistency, and give me confidence to make adjustments when things just don't feel right. Also, thanks for explaining why some adjustments may be helpful (high back, for example). Thanks for making this video!
@EriksBikeandBoardShop2 жыл бұрын
@Adam Wynn we are glad we help you out! Have a great time out there riding!
@jess_tech Жыл бұрын
I agreed. Thank you so much!!!
@Interstellar-cowboy6 ай бұрын
Great explanation , thanks a lot! But I have one remark here, why install re-flex on EST channel board? I think most of the people will get re-flex to install on boards with 2:4
@EriksBikeandBoardShop6 ай бұрын
Good question. Some people prefer RE:FLEX for the versatility with non-channel boards, feel, or already had them before getting a channel board so we wanted to show people how to set up whatever they have!
@eddieyurus39709 ай бұрын
Thanks for the video. Been snowboarding 15+ years and never rotated high back to be parallel w the board. Gonna try it out.
@EriksBikeandBoardShop9 ай бұрын
Glad we could help! Let us know how it goes!
@dexstrat92296 ай бұрын
Thank you for this, I almost lost the channel hardware because I couldn’t find it had no idea it was in that small cardboard piece
@Lion-G2279 ай бұрын
Most helpful video we could find on Christmas morning to put bindings on sons snowboard. Thanks for making a great and helpful video!
@nick-rl1xt9 ай бұрын
First time buying a board thanks for the help🙌🏻
@EriksBikeandBoardShop9 ай бұрын
Hope you enjoy it!
@caleblofstrom4322 Жыл бұрын
Awesome, things a little different sense I rode last years and years ago. Appreciate the vid.
@carolinaabarca3198 Жыл бұрын
This was the most helpful video! So easy to follow along, got my board all set up thanks to you!
@EriksBikeandBoardShop Жыл бұрын
Glad it helped!
@sarakandil72442 жыл бұрын
this video is exactly what i was looking for, was able to bind my board with no problems. thank you so much!!!
@EriksBikeandBoardShop2 жыл бұрын
@Sara Kandil, glad we could help you get it done! Have fun on the slopes!
@Pooleboyq Жыл бұрын
Thank you for helping me out man best video out there!
@EriksBikeandBoardShop Жыл бұрын
Really glad we could help out!
@carlo2982 Жыл бұрын
Finally a very useful video about that, thanks🙏🏻
@EriksBikeandBoardShop Жыл бұрын
Glad it was helpful!
@untamablegaming4652 жыл бұрын
Does any one else relize he is standing on the wall
@andyh3300 Жыл бұрын
He’s using a green screen
@r0bbert17 ай бұрын
What about the back-foot strap adjustment in the back hole position. When to do it and what’s the effect?
@calicurtis23882 жыл бұрын
Clutch Video! Thanks Man! 🤙
@EriksBikeandBoardShop2 жыл бұрын
@Cali Curtis We are glad we helped you out! Have fun out there on the hills!
@zorgaborgaTTV8 ай бұрын
So im not understanding what is happening, the binding are just free to move in the channel locks? Or Im obviously doing something wrong
@EddyGojim2 жыл бұрын
WoW big thx for the video Everything i needed
@EriksBikeandBoardShop2 жыл бұрын
@Eddyon60fps g, glad we could help out! Have fun out on the slopes!
@IamTheRealDeliCinq Жыл бұрын
I just got this exact setup! 3d fish and cartel X. I notice there is some kind of thread sealant on the channel screws, does this need to be reapplied when switching bindings from board to board?
@Ridee_19812 жыл бұрын
Great material! Just bought a brand New parir Of Burton Cartel X and I’m trying to adjust them. I have 2 questions. 1. - highback adjustment. On the film You did it only with front binding , but normalny both highback should be paralel to the edge Of the board right? 2. Upper strap - one the movie and in my Bindings I can see that it is in „lower position” (those two holes on the Side Of the binding). I difinitely be using them For shreding, riding on slope, grooming and hope to do some carve maybe finally. So from I know the upper strap should be located on the upper hole right ? To „lock down” the shoe more than on the lower hole.
@EriksBikeandBoardShop2 жыл бұрын
Great questions! 1. Yes, you would want to adjust both, we just showed one for time! 2. The upper strap is for fit placement, the two holes are there to be able to fit a wide range of boots. Hope this helps!
@Ridee_19812 жыл бұрын
@@EriksBikeandBoardShop done. Now 4 mths Of waiting For the Winter :)
@geirkarlsen7329 Жыл бұрын
very detailed and good intruction!
@EriksBikeandBoardShop Жыл бұрын
Glad it was helpful!
@MrRook2020 Жыл бұрын
Thanks for the video!
@EriksBikeandBoardShop Жыл бұрын
You're welcome!
@matthyde3088 Жыл бұрын
Great work, thank you so much
@EriksBikeandBoardShop Жыл бұрын
Glad you liked it!
@binglindeng8909 Жыл бұрын
Hi! There's plastic in the bolt, should i move that away, cause, I couldn't screw the bolt in 😅.
@binglindeng8909 Жыл бұрын
plastic aside the bolts 😂
@EriksBikeandBoardShop Жыл бұрын
@Binglin Deng, reach out to an ERIK'S expert at 877-885-2453 or use the chat feature on shopERIKS.com to get help with this specific issue!
@dipanshupaul1819 Жыл бұрын
It’s hard to find such quality videos. Please post a video where you show how to mount these bindings to 4 hole board
@EriksBikeandBoardShop Жыл бұрын
Great recommendation!
@hiddenbunny72059 ай бұрын
Burton's DialFLAD, isn't it just bending the bottom of the high back? since there is nothing moving to prop the angle... why is that a good thing.
@jaku238 ай бұрын
My screws won’t reach long enough into the board?
@micka3d2 жыл бұрын
Hi, can you make a video to fit the reflex bindings on a 3d hole pattern because I don't manage to fit it on my custom board. Thanks
@miken45522 жыл бұрын
A little late but you have to buy a 3d hole disc. I have a pair for sale if you need it. I transferred my Malavitas from my old board to a new one and no longer need them.
@micka3d2 жыл бұрын
@@miken4552 thanks. Got 1.
@HHplayground10 ай бұрын
Isn't this the EST?
@EriksBikeandBoardShop9 ай бұрын
EST refers to Burton's bindings that only require two bolts that attach to the outsides of the bindings. This video features Burton Re:Flex bindings that utilize a more traditional disc.
@jerryli8445 Жыл бұрын
What binding angles should i set? I am a newbie
@EriksBikeandBoardShop Жыл бұрын
We usually recommend somewhere between 9 and 12 degrees on both feet for beginners. There is a lot of personal preference though so feel free to try out different angles that work for you!
@ramonyoutube422 жыл бұрын
Thanks man, this helped me a lot with my new bindings that I've brought on a trip while not bringen the manual 🤦🏻
@EriksBikeandBoardShop2 жыл бұрын
@Ramon van der Roest, Glad we could help you out! Have fun out there on the slopes!
@RobGams Жыл бұрын
What is the main difference between reflex and est bindings?
@peterenis8447 Жыл бұрын
EST bindings are only compatible with Burton boards due to the channel system.
@EriksBikeandBoardShop Жыл бұрын
EST bindings are designed to only fit snowboards that use the “Channel” system, they can’t be mounted on snowboards that don’t use the channel system. Re:Flex bindings can mount on virtually any snowboard out there, including Burton boards with the channel system.
@flyingninety9 ай бұрын
What if i threw away the little box on the side of the board? :/
@EriksBikeandBoardShop9 ай бұрын
Sorry to hear that. Burton sells replacement channel inserts on their website, here: www.burton.com/us/en/p/burton-m6-channel-inserts-4-pack/W24-124511.html