Setting the Correct Voltage- Tattoo University

Proper way to set up your tattoo machine. How to find the correct voltage. What is the Sweet Spot. Prevent your machine from overheating. Easy way not to cause a lot of damage to your client.
website:
gotattoou.com/
Facebook:
www.facebook.c...

[@p.haugen7565]

A few hours ago, someone told me to watch this guy's videos with the speed turned up to ×1.25. It literally makes it go in a normal tempo!

[@kelseyshaver1378]

THANK YOU!

[@p.haugen7565]

@@kelseyshaver1378 anytime 👌

[@guaca7869]

😭😭

[@p.haugen7565]

@@guaca7869 don't be sad, we here for u

[@christianingemann5316]

best advice!

[@edzis2k996]

Its very rare when ppl actually make a video about so specific but extremely important at the same time in tattooing.. thank you very much ;) Like I never knew how to put the needle in .. a lot of times I had it upside down.. :D

[@tylerhughes5420]

I recognize that sound! I had no idea my wife did tattoos!

[@bryanraines1560]

🤣🤣🤣🤣

[@apollosky]

😂

[@Floshon]

Hahaha 😂😂😂

[@kellytenon9203]

🤣🤣🤣😭💀

[@GoBevo]

🤣🤣🤣

[@tweetalig]

Awesome vid bro! I did an apprenticeship over 20 years and then never tattooed due to the military. This was a great refresher.

[@TattooUniversity]

Glad to help

[@kres1510]

I saved this video awhile back because i knew this would be an excellent reference for when it was go time for me. -my uncle called my number and i watched this vid before and when tuning my liner and it was clutch. Not only did i get into a good lining rhythum my auntie that i tattooed smiled and is happy so far with our first ink session. -thank you bro you helped me stay focused and keep it clean and crispy (it was a brand new machine too). 🤙🤙🤙🤙 Greeting's from the island of Guam 🇬🇺 🇺🇲 .

[@shinobiplays907]

I buggered around with lower voltages until I got to the magic 8. Leaves good crisp clean lines. 7 was just too soft, 7 or lower would have been good for softer work. But 8 works pretty great.

[@deanstephens5940]

What machine are you using where you need 8v to run loaded? My machines run smoothly at 4 to 6 volts, but I build my own so I know what to expect.

[@travisl5125]

My liner also runs 5-6v​@@deanstephens5940

[@weneedheroes655]

Thank you sir! I watched 5 videos today and you made more sense with the voltage thing so far. The ear thing was something I was dependent upon and you are the first person I heard reference it. Much appreciated.

[@tilathetortoise756]

Finally someone explained exactly what I've been wanting to know! Thank you!

[@CustomScooby]

He really takes the time to put it in laymen terms so you can understand and yes he keeps his voice calm and even makes for a relaxing listen thanks for such a good video..

[@jayb1166]

How many of y'all closed your eyes ? Lol

[@sarahmeris]

ScrewedUpPapi lol my 4 year old daughter was watching this video with me and she said” mommy he said close your eyes 👀 “ she closed her eyes then I closed mine and listened lol this video was very helpful though I must say!

[@dantefox6491]

I did... Wtf

[@Goblinghoulz]

Dude your videos are so helpful. You’d be amazed how many artist I worked under don’t know anything about machines and say that. They just set up and go. When I would ask they wouldn’t know. Simple things too.

[@enriqueflores78]

“Crank up the voltage and going to town on someone “ I’m screaming

[@issacthornburg3558]

he's relaxing to listen to almost like Bob Ross

[@TattooUniversity]

Thank You!

[@Ajthekid11]

Issac Thornburg totally the Bob Ross of Tattooing I’ve learned so much from this guy I gotta check out his IG and website. I dig the tips

[@chinksindahouse6]

Dude sounds just like Brian Posehn and I couldn't be more excited about it.

[@TattooUniversity]

I get that a lot

[@ariesdelfuego]

Best ASMR video I've ever listened to. I started drifting into dreamland

[@TattooUniversity]

I'm going to do a tattoo asmr video now. Stay tuned for it.

[@timbreakradio]

I was thinking the exact same thing and felt it too!

[@onedayatime8130]

I love this video to help fall asleep every night. his method is great tho, but don't be afraid to turn up the voltage, depending on your machine build it could vary, do what he shows you with the finger, if it stops its too low, you have to hear the machine sound change when entering skin, that's what your looking for, if you put your finger on the bar and there is no sound change, it's too high. good luck

[@NatetheGreat009]

Dude, solid information, just the right amount of detail and explanation 👍🏽👍🏽to you. This is a crucial part of the process and I remember what it was like first starting out. It can be intimidating at first. So keep up the great work and continue spilling solid information

[@f33koslav31]

Far best video about voltage and right tune coil machine ❤

[@NoWayIsWay86]

Probably the best video and information out there.

[@anastasiatasic7569]

Thank you for sharing your knowledge in such a patient and non-condescending way! Means a lot to us that are just getting started :)

[@aaronhuffer4717]

Chicano tats

[@amberterry3459]

First morning laugh goes to Tyler hughes, thank you 😆🤙... Best video ive watched by far. Thank you for the detail. The Bob Ross of tattooing!

[@Nyaboron-yf5gk]

The sound thing helps me a lot. thank you.

[@charliemaddock3459]

ah man you have all the answers im after thank you so much , I have been running jack hammers and this info is so damn hard to find with everyone using pens now ... your a legend

[@TattooUniversity]

Thanks. I plan on adding more videos soon.

[@anthonycraig3064]

This was more helpfully then any video I've watched

[@danielcronk4411]

Good looking with this I personally have an issue with setting the coil machines.. so I got accustomed to rotary. And I like your break down. With the voltage this has been the most informative video for tattoos I have watched. Thanks for the lesson

[@TattooUniversity]

Glad to help!

[@danielcronk4411]

@@TattooUniversity also I have another question I can't seem to find an answer to. When lining is it better have the machine hit harder or softer with the needle? and the same question for shading.

[@goanoa7954]

Really good Video. Thx and greetings from Germany

[@ToeTag-nc4ow]

Awesome video brother! Very informative for any beginners out there including myself! Thank you!

[@halliewest3558]

Hi Just Found Ur Channel and I've gotten Some Good pointers from You ...i just Bought a Beginner tattoo kit so I can LEARN How to tattoo on Myself I got some PRACTICE Skins but Some Questions I Still have and I just HOPE You keep posting cuz Last Video I seen if yours was a Year ago and Nothing RECENTLY.... If you have a NEW CHANNEL Please Keep me posted... Thanks for your INFO cuz You Explain it WELL and EASY

[@Captain_AF]

This was fantastic. Thank you!

[@chuies1314]

You helped me get sum good sleep bro..cranking up the voltage

[@JoeMaxFpv]

Thank you for this video. I’m a super noob to tattooing and bought a kit just to touch up my own stuff. Not for a career. I did really well first day but these are the things I need to learn. I subscribed and will watch and learn. Thank you.

[@TattooUniversity]

Just learn as much as you can first before tattooing on yourself.

[@JoeMaxFpv]

I’ve been watching quite a bit. First touch up I did came out good but I think I had the needle out a hair too far because it would get hung up in my skin. So I think less needle and a bit of angle on the gun rather than straight down will make for a better experience. Although what I did cane out good.

[@910282]

Awesome vid! Glad that I found it. Got a new coil recently but that machine also confused me. It’s so powerful that can only start at 3.5 and it kicking loud. And I can normally do lines at about 3.7. I guess it’s depends to the machine Hope it’s normal. 🥴

[@TattooUniversity]

Very normal. If it's working how it should. Somewhere down the line this voltage confusion was thrown out there. I always run 8 volts bull crap. You only use what it takes for the machine to run correctly. 😁

[@910282]

@@TattooUniversity Thank you for replying me president 🙏 This channel is a community with love. ✌️ Peace

[@tolishaws]

The front looking double armature bar while running is a good tip also.

[@melodysappier3627]

“Look.Feel.Listen” Love it!

[@o0Honnie0o]

...taste.🤣

[@Kawaiikairyu]

I've been tattooing (practice skin) on 3.5 because I was afraid of it being too high. Thank you so much for this video!

[@TattooUniversity]

Glad to help

[@Kawaiikairyu]

@@TattooUniversity Subscribed!!!

[@jorremarek6245]

The setup volts depends the amount of wraps on your coils. There is no sweet spot. Got 4 different liners machine for different lines, one is running on 3.6 volts the setup is for a 3 round liner needle till maximum 5RL needle the bigger the needle the more power a need to get the needle in the skin. So for a 7 or 9 RL I got a different machine. And need more volt to get it run .... because I need a little bit more power I need different coil, coils with more wraps. Most important know how a coil machine works, if you know how it works, then you know how to adjust. A machine is not going faster if your put more volts in it ... it goes harder... not faster it's a big difference.

[@ChrisS.WyoBraska]

Idk how much i trust this dude. I don't see a single tatt on his arms lmao

[@TattooUniversity]

Watch newer videos

[@TattooUniversity]

Also just watch more videos. You don't have to trust me. The proof is in the video. I only show what's tried and true information

[@hollyelizabeth870]

Thank you, you explained this very well. I see I was taught by someone who did not know what they were doing.

[@BOATINDOCTOR]

dude I watched a lot of your videos you helped me a lot just did my first tattoo on my leg came out incredible I applied everything I learned from you just want to say thank you for helping me along my journey. keep up the good work

[@oliviergagnon2592]

Cool did that too 2 yrs ago. I've done about 12 so far = all super good

[@unwiseshow]

Not often do people create videos about something so specific yet crucial in the world of tattooing..

[@TattooUniversity]

I try to do videos that will make a difference

[@Zpayne]

very helpful thank you

[@lupezuniga8265]

This is the first video I see with someone saying to close ur eyes and listen...It helped out a lot , Thanks...

[@TattooUniversity]

You are Welcome!

[@dwaynejohnson8780]

Clip have two ,but on my coil machine as only have one brass part for the power supply, looking for the second brass

[@brandonm7750]

This helps me so much. Thank for the video.

[@h.t.7204]

Man... When I started 20 y ago... Tattooists didn't share knowledge, I scrubbed toilets and mopped floors for a year before I was able to start setting up his station for him to work.. It was 14 months before he "let" me get my first machine.. An antique Spaulding & Rogers, and it was the same.... Fuck! I remember him yelling at me... Close your godamn eyes! Listen to your machine! It will tell you everything you need to know. - No digital then.. Just the knobs.. Good times.. Thanx for the flashback!!!

[@TattooUniversity]

Awesome! What I find is even if someone has learned differently they will come to the same conclusions. I learned a lot about machines on my own. Then I would read a book and it would tell me some things that I was already doing. Just made me feel better knowing I was on the right path. Machine tuning is an art that you need to practice a lot because you start to know what is right by feel. The more you touch it and mess with it the quicker you learn what feels right and what is whack. You need to look, listen , and feel when the machine is working properly.

[@TheEdiphone]

theres a lot more variables to that adjustment and final setting but you did hit the nail so to speak but the variables that also affect the final product are important to know and address before you ever clipped the cord and stepped on the peddle like point gap , spring reflex the angle the point screw and spring are set at then theres coil size armature bar weight and position and needle bar ,tube configurations and rubber bands holding bar in place all have a direct effect on that final power setting and quality of work it will do

[@TattooUniversity]

There is a lot to fit into one video, so I try to break it down into several videos. It takes years to learn all this information. That would be difficult to condense into one session.

[@TheEdiphone]

right on i was just saying that there are a lot more things that go into the pre check n insertion of a needle into someone than the lay man would even think could affect the outcome and i really enjoyed your video as it sounded like you actually get what it takes to do the work and unselfishly shared it to all thanks really not meant as negative criticism or disrespect just a point of my experiences and what i encountered along the way huck though he dogged paul rogers out has the best info for tattooing n even he missed some so i hope i didnt piss ya off as wasnt my intent just passing along my info to help another out and preserve the art n its artists as well as the mechanical aspects often unrealized untill they are affected by it .

[@AndrueSOCAL]

Cool I’m sure you made videos on this topic before but I’m having trouble mining with the new rotary machine with needle cartridges. Is that common or is there a way to have the needle stay in place?

[@sharonwriggs6482]

Boi that voice has a certain sound to it... A particular type of depth... No denying it.

[@stevenwall6810]

This video really helps considering iv just going to start giving tattooing ago maybe pig skin first don’t want no shity job on anybody till got it down too a t awesome video

[@babysitter4651]

Can u buy the plastic bag that goes around the cord in a store?? Like store store not online

[@jrose2dzl]

So does this mean that you can use the same machine for lining and shading there doesn't need to be different springs or anything

[@TattooUniversity]

This answer to that is a long and complicated one that people love to fight about. Let's see if I can answer in this comment. Hope your sitting down this could wind both of us. You can use the same machine to do anything you want. You can line, shade, and color pack with any machine if you know what you are doing. It also helps if you understand machines. Let's take it down another rabbit hole. Machines aren't liners, shaders, or color packers. They are just machines. People call them those three names to try and simplify things. You have faster and slower machines. You have different machine frames that allow for more or less stroke. The amazing thing is artist like different things. You can adjust the machine to do what the artist wants. I line with what someone might call a shader. It is a slower harder hitting machine with a longer stroke. A shader set up with less tension on the rear spring. If I move my hand faster I can shade with it. If I slow down I lay down a solid line. Take a "shader" sometime and put short tapered needle in it and start filling in color. The needle adjustments will effect how you can tattoo. Yes you can do anything with one machine if you understand machines, needles, and your art techniques. You can also adjust your machines so they do specific jobs. I can adjust a machine so it does line work better than shading. I can adjust a machine so it's easier to shade with it by adding more tension on rear spring. Certain machines will make it easier to do your job. Faster shorter stroke machines are good for one liners. Longer stroke machine with hard hit is good for color packing. The key point I'm trying to make is learn as much as you can. Knowledge will give you the power to make decisions because you know the equipment and how to manipulate it. You know the marks you want to make. Match it with a machine that allows you to make those marks successfully. So the answer is yes and no. You can adjust yourself or your machine.

[@LadyWindblume]

This video was so easy to follow and understand! Thank you!

[@mattgarcia9134]

Thank you! This cured my insomnia

[@TattooUniversity]

Glad I cold help

[@Freak8983]

Definitely a great teacher in the arts

[@errorerror5276]

thank you for this video :)

[@anthonylauria979]

Hey man,great vid. I have a question,when I’m doing line work,or even shading,my lines I use about 7.5-8.5 volts,using a dragon hawk rotary machine. Now when doing line work,why is the needle sometimes,get stuck in the skin as I’m laying a line? Is it because the machine is a china-cheaper machine? Idk,but it is driving me crazy,please if u can do a video on it,that would be AWESOME !

[@danap.harperii8215]

I used to get that, too! Man, slowin' down, taking your time, chopping it up with your collector... Yeah, try it out.

[@misakisad]

You’re probably pushing too deep. Needles tend to get caught if you’re going too deep and too fast. Try and pull back your needle a couple of mm or work on your depth control, that should help you out a lot

[@chris43v3rharper6]

@@misakisadur needles out to far

[@Vorias]

Rotary is slower than coils i use to use a hummingbird rotary and i move very slow which gives me a clean line as for coils will always be faster than rotary

[@arealassassin]

Also, a rotary machine doesn't always stop with the needles withdrawn when you cut the power! Depending on where in the rotation it is, the needle can be full out when you lift off, thereby getting caught. That is the main disadvantage of rotaries, and something that no-one talks about! They're ok for shading- with a bigger bundle of needles, but for single needle, or a 3 round liner, they're no good. Go coil- your lines will be finer, and more controlled.

[@tattoosbyjohnsimsek8429]

I have the same tattoo machine and flame coming out from bar why is it normal ?? Thank u

[@TattooUniversity]

If you want to support Tattoo University you can send money to [e-mail] with PayPal. You can also donate for free with Gawkbox. Play games and earn money that can be donated to Tattoo University. You can contact me through the email above or through message on social media. Nick Durant or Tattoo University on Facebook and Instagram. You can also buy some of our merchandise. See what is available on Instagram at tattoouequipment. Donations and Money goes towards improving the channel and also helps take care of various animals that need help. See the animals we are helping on Instagram at tatsnrescues. Last of all check out how our website gotattoou.com and see what we are working on.

[@karmawade7163]

Man this will improve your life on your machines...5.9 is what I keep my gun on..thanks so much

[@DESiSAUR]

is 5.5 to 7.5 volts good for american traditional?😯

[@laidbaqq]

I could meditate and learn tattooing at the same time. However watching this I learned that my feelings as a person BEING tatted, the artists had their machines too high. I am an illustrative and creative artist and can at least tell by ear how much buzzing is in the field of irritation. I have had some bad experiences. Even now when I exercise particular line work will swell from certain artists. As well, I decided I would only entertain brown artists, being that it seems they are more understanding of our skin conditions, moisturizing and aftercare, fat distribution and etc. Can we all introduce discussions around checking in with the clients when it comes to voltage/riding the tube issues??

[@laidbaqq]

And with respects. I am satisfied with my viewing experience.

[@LilMellowMC]

Thank you, you’ve helped me so much! Great video you explain it perfectly! :D

[@hells_razor8276]

Is this the same for a rotary?

[@bdee1084]

How about the amperage. How much do machines draw

[@whateverman555556565]

Thanks man! I really appreciate the info! Just got my first kit!

[@TattooUniversity]

Glad to help. Hope you learn a lot.

[@ehurtado499]

Thanks for all the videos! How about the shading? That should be higher voltage right?

[@Floshon]

Really good tips in here, thank a lot! Just a question, you’r setting up the voltage of your machine like this for human skins... But what about fake skin, who is stronger; adding 1 volt would help no? Thank and keep going the good work!

[@randylambert9010]

What if your kit gun wont work unless u crank the voltage... Do i need to tune my tattoo gun

[@thormight784]

Any tattoo machine you get online or from a kit will need to be tuned before using, good luck

[@ricardorodriguez1242]

Hey buddy what if it’s the power on top what if that not right

[@ashleymcknight5316]

Thanks for this. It helps alot!

[@truckdrivermm]

What coil machine or rotary machine would you recommend for a beginner and power supply?? Like your videos .

[@nazoroku5036]

lol who else had to turn up the playback speed to 1.25 , just talks a Lil to slow for me but good video

[@FIGHT101TV]

I just gotta set up from my brother...so i had my volts on 7...i was doin great for like almost a hour practicing on fake skin. an for some reason it wont go back down its stuck on 16 volts an the knob wont turn it down. What you think happend? Oh an my power supply didnt come with a power cord...i got a 125v power cord...but the box says i need a 250v power cord. You think this is the problem? The box isnt hot at all

[@TattooUniversity]

When you're practicing stuff like this is good because you learn from it. From my experience you don't want to force things to work. You don't want something like this to break down while you're in the middle of a tattoo. It will make you look unprofessional and it will take a lot more time to finish the job. My suggestion would be to keep looking for some equipment that is better. If you have good or bad equipment always look for ways to improve.

[@TattooUniversity]

I have had some really bad power supplies when I first started. I had to go through about four of them before I finally found one that worked correctly. When you get the cheaper ones they tend not to work like they should if you can eventually go for a better power supply. Having a really good power supply is a must and it will last you a really long time

[@FIGHT101TV]

@@TattooUniversity thanks!

[@shaunlawrence1447]

I’ll say one thing, your needle isn’t retracted when not powered which is a safety Nono, accidental sticks can happen.

[@xjunkxyrdxdog89]

Will larger needle groupings need higher voltage to overcome the higher surface tension?

[@Scooter3194]

Finally a video that makes sense

[@TattooUniversity]

Thank You

[@Scooter3194]

Could you do a video on why the needle drags or sticks to the skin please ?

[@TattooUniversity]

@@Scooter3194 The tattoo machine springs don't have enough upward tension or there is too much hang. Put the needle in more or adjust the tattoo machine. I can do video.

[@Scooter3194]

Thank you because I’ve adjusted needle idk how many times and it still drags

[@TattooUniversity]

@@Scooter3194 Machine needs to be tuned. You can try to loosen up your springs. Put it out to the side and bend it upwards. Then put it back and it will have more pull toward the contact screw. Might give you enough pull to get the needle out of the skin. This will change your duty though. Could be good or bad. Here we get into tuning tattoo machines. One adjustment will effect how the machine runs. Everything needs to be correct to work. You can try it though and see if that does the trick.

[@mikemooney559]

Beautiful sound

[@christinakallet9085]

How much voltage would be ideal for thinner skin vs an arm like face?

[@TattooUniversity]

Start off with less and add more until you get correct results

[@TattooUniversity]

If you don't have enough voltage you will get ghost line. If you go too deep it will hurt and bleed. Machine set up and needle will effect voltage needs. Do a test line and adjust.

[@vivacervato9796]

My maschine sound all the same. Just louder and faster. It doesn't make this klick sound and chance the sound. Could this be or is something wrong?

[@Jay-ly8ud]

Is that a liner ,or a shader machine. I'm still learning the difference ,and can you just use either one for both ?

[@TattooUniversity]

You can use both. Typical liner machine is fast and has short stroke. Used with thinner inks. Typical Shader has longer stroke and higher tension on the rear spring. Yes you can line with a shader. I find it more helpful if you use a thicker ink. It all depends on what you like and your hand speed.

[@natemunden7568]

Does the machine run and touch along the skin while ur runnin

[@TattooUniversity]

Needle sticks out and you control the depth with your hand. You can feel when it's right. Takes some practice to understand. Also need to look at the tattoo to make sure everything is correct

[@almenthompson5577]

What is the best tattoo gun to get I have the Chinese kit can I get a 10 coil are a 8 coil I even have the pen it does not put in the ink in the skin right what the best gun to get

[@alessio.talarico02]

So how much volts should I use for lining?

[@kumikanno3014]

Im 1st timer and i just ordered a tattoo set and this vid help me understand how to tune my machine.. I wonder if this also applies if its shading machine?

[@TattooUniversity]

Machines are tuned the same. They are adjusted with different tension and stroke length. The basics are the same. You need everything lined up so it works. Once it is set to work you adjust it to do what you want.

[@joannaherrick2215]

This video was very informative, thank you!

[@bagchaser3859]

right!

[@shawnr5649]

Yooooo Brian Posehn, whatre you doing in a tattoo video?

[@dxg3345]

Should it be running at ~50% duty if you go by sound? My machine sounds great, not bogging down too much, but running at a lower duty. If I bring the volts up it gets to about 50% but it seems to be hitting too hard. I'm using reelskin and its cutting it. At this point I'm not sure if it's actually hitting too hard or if reelskin is just really fragile.

[@TattooUniversity]

Couple issues here. Fake skin isn't real skin. Even if they call it that. It is rubber and will act differently. Rubber should actually take more damage than real skin. If you are cutting it then you will most likely cut a person with that machine. Don't think it's your duty that is the issue. The machine is running too fast or your hand is moving too slow. With the needle moving so fast it is acting like a razor blade or cutting device. You want to slow that down so the needles puncture the skin and leave ink without chewing up the skin.

[@dxg3345]

@@TattooUniversity Wow man I really I appreciate you and your fast response. As soon as I read your comment, I quickly set up and tried a faster hand speed and that seemed to have made a huge difference. I was slowing down because my lines were coming out real faint. I think I may need to actually go deeper and bring up my hand speed. I'm going to go practice with that in mind. Again, thank you so much for everything you do 🙏

[@sarathedward5440]

Very good informations thanks for your Easily understanding explanations...

[@Zephera3]

I listen to machine but it doesn't make that noise until 10 volts 😬 everyone talks about 7 or 8 volts but my machine doesn't sound like that at those volts. What could it be??

[@chris101gray3]

Your binding post is not set correctly

[@bbrewster1986]

Is there a decent liner machine on the market for under $100

[@TattooUniversity]

Try to find a builder who has a liner for sale around that price. If they aren't over charging for their machines you can find a good machine for $100.

[@TattooUniversity]

You can also email me or contact me on social media. I have different machines for sale. Depends on what people trade me. I've sold really good machines for around $60. Also sell cheaper builds for around $30. Just depends on what I have at the time and the quality of it. email - [e-mail] insta- tattoouequipment

[@Lovewisdom-Gothamjoke]

Oh, i've been going with a bit too slow power. (Traning on fejkskin)

[@k-q-2991]

I assume you'd use the same concept with rotary tattoo pens.

[@Epiphalactic]

Lol this guy's "one more time" is like my "5 more minutes". Also, thanks to the cat that gave the 1.25x playback speed comment. Wish they had that feature in highschool 🤣 Good info though.

[@shonshon64]

Thanks man! My sweet spot is 6.3

[@TattooUniversity]

Most of my machines run from 5-7volts. I rarely go over that.

[@yussufdh2055]

Depends on your machines. The larger the coils and the larger the frame the higher the voltage needed

[@l.m.8339]

Wow you are amazing at teaching

[@katerinafidler8947]

I love your voice!!!!!!!

[@TattooUniversity]

Thank You

[@lehzehm]

I have a friend who is a tattooist. He runs his liner at 17 volts. Is that okay?

[@TattooUniversity]

If he isn't messing anyone up with it and it's running correctly

[@gilbertdelorenzo3461]

Brilliant. this guy knows what he`s talking about.

[@josetorres-qx8xl]

I have a ? I have to use my machine at prety high volts,but still seem like not enough power,power supply is one of those dual liner/shader.sumthin is not rite n e ideas?thank ya

[@TattooUniversity]

Machine tuning is the key. If the machine isn't set up correctly it will not tattoo. Learn how to tune it or find someone who can tune it for you.

[@chefkamoonig2485]

Bruh tried to put me to sleep 😴

[@heikosoeder]

What Maschine you have in the video?