Setting the Depth of Cut in the Lathe Machine Accurately

  Рет қаралды 12,753

Prof Johnny

Prof Johnny

Күн бұрын

How to calculate and set the depth of cut.
How to produce light trial cut, and true diameter.
How is the amount of per graduation of the graduated collar of the cross slide produced?

Пікірлер: 47
Center Drilling in the Lathe Machine
20:47
Center Drilling in the Lathe Machine
Prof Johnny
Рет қаралды 6 М.
Q&A #4 How to read thread chasing dials & calculations for non standard threads (three wire method)
26:59
Q&A #4 How to read thread chasing dials & calculations for non standard threads (three wire method)
THATLAZYMACHINIST
Рет қаралды 17 М.
Players vs Corner Flags 🤯
00:28
Players vs Corner Flags 🤯
LE FOOT EN VIDÉO
Рет қаралды 94 МЛН
Когда отец одевает ребёнка @JaySharon
00:16
Когда отец одевает ребёнка @JaySharon
История одного вокалиста
Рет қаралды 10 МЛН
Do you choose Inside Out 2 or The Amazing World of Gumball? 🤔
00:19
Do you choose Inside Out 2 or The Amazing World of Gumball? 🤔
BigSchool
Рет қаралды 25 МЛН
哈哈大家为了进去也是想尽办法！#火影忍者 #佐助 #家庭
00:33
哈哈大家为了进去也是想尽办法！#火影忍者 #佐助 #家庭
火影忍者一家
Рет қаралды 102 МЛН
Roughing and Finishing Cuts in the Lathe Machine
29:17
Roughing and Finishing Cuts in the Lathe Machine
Prof Johnny
Рет қаралды 14 М.
How To Cut Threads On A Lathe
20:37
How To Cut Threads On A Lathe
Blondihacks
Рет қаралды 1 МЛН
Calculating the RPM for your machines
11:22
Calculating the RPM for your machines
Stuart de Haro
Рет қаралды 281 М.
How to cut a thread on a manual lathe (Intermediate method ideal for home workshop & hobby engineer)
12:07
How to cut a thread on a manual lathe (Intermediate method ideal for home workshop & hobby engineer)
Handmade Extreme
Рет қаралды 1,3 МЛН
Cutting 60° Internal Threads by the Use of Lathe Machine
28:36
Cutting 60° Internal Threads by the Use of Lathe Machine
Prof Johnny
Рет қаралды 10 М.
Tapers on Hobby Lathes - How to make them and why!
20:40
Tapers on Hobby Lathes - How to make them and why!
Blondihacks
Рет қаралды 459 М.
Straight Turning with Chamfering in the Lathe Machine
22:50
Straight Turning with Chamfering in the Lathe Machine
Prof Johnny
Рет қаралды 10 М.
Setting Up Spindle Speed and Operating Controls of Lathe Machine
31:15
Setting Up Spindle Speed and Operating Controls of Lathe Machine
Prof Johnny
Рет қаралды 12 М.
Setting-up Tool Bit in the Lathe Machine
16:44
Setting-up Tool Bit in the Lathe Machine
Prof Johnny
Рет қаралды 8 М.
Turning a Diameter to Size on the Lathe
12:18
Turning a Diameter to Size on the Lathe
Toms Techniques
Рет қаралды 265 М.
Players vs Corner Flags 🤯
00:28
Players vs Corner Flags 🤯
LE FOOT EN VIDÉO
Рет қаралды 94 МЛН