Why aren't the Mosmatic nozzles labeled? I can't tell just looking at them which one is 45 degrees vs. 25 degrees. Also no labeling of what the oring baggies are for or why there is an extra foam cannon orifice included.
@gillesLegein Жыл бұрын
Sad it's not for sale in Europe 😪 But Kranzle is easy to purchase
@Abel3270 Жыл бұрын
Why is the inlet hose so short?
@Pearl3Drummer Жыл бұрын
What nozzle do you recommend for washing cars
@ObsessedGarageShorts Жыл бұрын
the 40° nozzle
@komplex75642 жыл бұрын
Can this be gravity fed? I tried gravity feeding the VE52 and it didn’t work. Thanks
@pullingthestrings5233 Жыл бұрын
Unfortunately no. These things are useless unless you want to use everything OEM or else anything else voids the warranty.
@Yielar1Күн бұрын
@@pullingthestrings5233 Yes, if you search KZbin many mobile detailers have the Active 2.0 in gravity feed rigs
@flexr6425 ай бұрын
A good thing to note is that there is a little green light on the black electronic connection. It must show green, or the device won't work as intended. There are little white buttons that you can click, which will turn the light green if it's not already on while connected to the outlet. Hope this helps.
@zorantb2 жыл бұрын
Just received the Advanced package for the 2.0 and my foam cannon didn't come with the quick disconnect fitting assembled. Whats the torque spec for the foam bottle?
@ObsessedGarageShorts2 жыл бұрын
There isn't a specific torq spec for the plug, you'll just want to tighten it down snugly. We have a video going over foam cannon basics I would recommend checking it out for more info!
@joliewu86252 жыл бұрын
It already arrived! I thought they won’t be out til august
@ObsessedGarageShorts2 жыл бұрын
@@joliewu8625 The pressure washer won't ship out to customers till August.
@smody1212 жыл бұрын
Any other reason for repressurizing besides a leak in the line? I'm pretty sure I've fixed them all, but still having this issue with my Ryobi. Using the 50 foot KobraJet hose and Advanced wand package.
@ObsessedGarageShorts2 жыл бұрын
Sometimes it can be an issue with the internal pressure on the pressure washer itself. It's a case-by-case thing but the most typical cause is a leak.
@connersmith24452 жыл бұрын
I’ve had two active ve52 units and both couldn’t handle a longer hose. No leaks, they would just continue to surge. When I use my longer hose I use my sunjoe. Kind of a bummer huh
@smody1212 жыл бұрын
@@connersmith2445 good to know. I don't have any other options unfortunately other than using the Ryobi stock hose or just buying a new pressure washer, which is likely what I'll end up doing.
@pullingthestrings5233 Жыл бұрын
@@smody121 these things are garbo. Who ever designs these to be meant for detailers but can't replace OEM equipment.
@sharky_spike2 жыл бұрын
ENGINEERING FLAW ALERT...the end of the cord where the plug box is will be non functional on most outdoor outlets because its much too bulky to fit in most outdoor outlets...it should be redesigned to have the box about 6 inches down cable from the actual plug so the plug will be small enough to fit under the cover etc...look at the greenworks pro 3000 psi machine...thats the design this needs
@pullingthestrings5233 Жыл бұрын
This thing has so many flaws. The fact that you can't use a 50 foot hose without it surging is a joke.
@tristanwwsd8 ай бұрын
Get a short extension.
@travisc5658 Жыл бұрын
What junk. Guaranteed to leak at first. Turn off and check for wear and tear on a new o ring. Complete garbage company and salesman.
@TheTAEclub Жыл бұрын
You trash boy go make a channel
@davidmorgan29642 ай бұрын
I’ve been looking at tips for spray guns for washing my cars and beyond the 40* tip there are other numbers (2.0, 2.5, 3.0, 3.5, 4.0, 5.0) what do these mean and how do I know what I need? (Excuse the terminology as I don’t know this. Thanks
@TheRosebudz2 жыл бұрын
it would be nice for him to mention if the correct orfice(1.5mm) is already installed in the foam cannon and go thru the operation of the foam cannon as well. thanks
@Yielar1Күн бұрын
@@byronnix1628 Sure does, I have the newest MTM model and it comes with a 2nd orfice
@olk34 ай бұрын
Thank you for the clear, well-paced video. I just got your Ultimate version, and was staring at all the parts spread out on my workbench. You made it easy.
@Jeeper13782 жыл бұрын
Is OG going to offer a tip package 3.5-7.0?
@ObsessedGarageShorts2 жыл бұрын
Yes, we are working on that right now. it should be live very soon.
@fergusonfinancial2473 Жыл бұрын
Can you move any farther back?
@MisterJDee2 жыл бұрын
This compressor is not 220v compatible, so not suitable for anyone outside of North America
@BP-ss5ur Жыл бұрын
How is the vibration? Specifically if I purchase the custom install set from OG… does it screw in or standalone?
@loggy7888 Жыл бұрын
The small plastic bags that come with the package(ultimate in this case); are these additional O rings and a wider angle nozzle? Or do the O rings need to go to the pressure washer inlet? Thanks
@ObsessedGarageShorts Жыл бұрын
The O-Rings you're referring to are replacements for the couplers on your hose or for your sprayer. The small screw is the replacement orifice for you foam cannon.
@ORG4Runna Жыл бұрын
How long is the power cable?
@imDnice Жыл бұрын
My Active 2.0 surges when I put on my aftermarket hose, please help?
@MikeKaufman-d7n10 ай бұрын
Figure out the issue?
@Yielar1Күн бұрын
@@MikeKaufman-d7n apparently the early units had pressure switch issues that has been resolved I'm being told. You also need a high quality hose to prevent surging. I'm going to be trying my new 2.0 tomorrow.
@travistanaka4215 Жыл бұрын
Do I need to use Teflon tape when attaching the couplers to the pressure washer hose?
@ObsessedGarageShorts Жыл бұрын
Yes, you do, but they should already come attached if you buy a solution.
@travistanaka4215 Жыл бұрын
@@ObsessedGarageShorts mine wasn’t attached. I got it from a local detail shop. Just want to confirm I don’t need to use Teflon tape on the connectors to the pressure washer? Per this video. I’ve got different advice and I’m new to using a pressure washer.
@ObsessedGarageShorts Жыл бұрын
@@travistanaka4215 Correct, you dont need to use teflon on the connection to the pressure washer. the only connection that should need teflon are the couplers to the hose. provided there not M22
@travistanaka4215 Жыл бұрын
@@ObsessedGarageShorts thank you! Appreciate your help.
@on3lastb3t Жыл бұрын
Mine just leaks the whole time…
@MikeKaufman-d7n10 ай бұрын
Did you figure out the issue?
@on3lastb3t10 ай бұрын
@@MikeKaufman-d7nnope I gave up. Bought a hose off Amazon.
@Jeeper13782 жыл бұрын
On pre order
@slicktype0012 жыл бұрын
Hell yes….. when the heck are we expected delivery from our pre order?
@unrealorbit2 жыл бұрын
I believe they mentioned August for the delivery to OG.
@ObsessedGarageShorts2 жыл бұрын
We should be getting the units in sometime in August.
@TheRosebudz2 жыл бұрын
will the ultimate packages ship first?
@QuyLe408 Жыл бұрын
I currently ordered this active 2.0 from OG. I have the uberflex hose and it doesn't seem to like it. The pump would not stop running after you release trigger. I sent OG multiple request for help / return... still no reply back from OG.
@ObsessedGarageShorts Жыл бұрын
Quy, Please send an email to Support@obsessedgarage.com they should be able to help, and if you're still haveing issues DM your email to us on facebook or Instagram and we will reach out directly.
@pullingthestrings5233 Жыл бұрын
What a joke. I thought these machines were meant for detailers. I rather spend an extra 250 and get an AR blue
@MikeKaufman-d7n10 ай бұрын
Did you get this resolved?
@pullingthestrings5233 Жыл бұрын
These machines are a joke. The plug won't fit on most outdoor connections, the hose you use can't be longer than 20 foot without it surging. Can't use smaller orifice than supplied or you risk tripping a breaker. If I'm going to spend this much i rather cough up an extra $250 and get the AR blue.